qmk-firmware/keyboards/ergoslab/readme.md
Tom Saleeba 474f7f399c [Keyboard] add initial ergoslab directory ()
* feat: add initial ergoslab directory

* fix: address all comments from noroadsleft

* fix: address comment from drashna

* feat: add swap hands config to ergoslab

* chore: change ergoslab image to real photo

* re
2020-01-02 14:40:13 -08:00

34 lines
1.2 KiB
Markdown

# ergoslab
![ergoslab](https://raw.githubusercontent.com/tomsaleeba/ergoslab/master/ergoslab.jpg)
A split ergo 5x6 keyboard with hotswap sockets and a heap of thumb keys designed
by Tom Saleeba. [More info on the GitHub
Repo](https://github.com/tomsaleeba/ergoslab).
**Status** The ergoslab is currently being beta-tested.
* Keyboard Maintainer: [Tom Saleeba](https://github.com/tomsaleeba)
* Hardware Supported: Pro Micro (ATmega32U4)
* Hardware Availability: gerbers are available from the [releases page on the
GitHub repo](https://github.com/tomsaleeba/ergoslab/releases). Get them
manufactured at your favourite PCB house. I used JLCPCB.
Make example for this keyboard (after setting up your build environment):
make ergoslab:default
Example of flashing this keyboard:
make ergoslab:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide)
for more information. Brand new to QMK? Start with our
[Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A build guide for this keyboard can be found here: [Build
Guide](https://github.com/tomsaleeba/ergoslab/blob/master/build-guide.md)