qmk-firmware/keyboards/handwired/splittest/promicro/readme.md
Joel Challis 0da743d80b [Keyboard] Refactor handwired/splittest to support multiple boards ()
* Refactor splittest to support multiple dev boards

* Refactor splittest to support multiple dev boards - revert change to number of RGB led

* Refactor splittest to support multiple dev boards - update docs

* Refactor splittest to support multiple dev boards - correct docs

* Refactor splittest to support multiple dev boards - update teensy master logic
2019-07-20 13:35:30 -07:00

473 B

Pro Micro splittest

To trigger keypress, short together pins B3 and B6 (marked on the PCB as 14 and 10).

Wiring

  • Add switches to both Pro Micros across B3 and B6 pins
  • Add pull-up resistor to left side between VCC and F6
  • Add pull-down resistors to right side between GND and F6
  • Connect the following pins on both sides together: D0, D1, GND, VCC
  • Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
  • Wire Di of RGB strip for each half to D3