update links

Build-Environment-Setup.md

@@ -103,7 +103,7 @@ docker run -e keymap=default -e subproject=ez -e keyboard=ergobox --rm -v D:/Use
 This will compile the targeted keyboard/keymap and leave it in your QMK directory for you to flash.
 
 ### Vagrant
-If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](../../blob/master/doc/VAGRANT_GUIDE.md).
+If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](https://github.com/qmk/qmk_firmware/blob/master/doc/VAGRANT_GUIDE.md).
 
 ## Verify Your Installation
 1. If you haven't already, obtain this repository ([https://github.com/qmk/qmk_firmware](https://github.com/qmk/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application.

Eclipse.md

@@ -15,7 +15,7 @@ Note that this set-up has been tested on Ubuntu 16.04 only for the moment.
 
 # Prerequisites
 ## Build environment
-Before starting, you must have followed the [Getting Started](../#getting-started) section corresponding to your system. In particular, you must have been able to build the firmware with [the `make` command](../#the-make-command).
+Before starting, you must have followed the [Getting Started](/Home.md#getting-started) section corresponding to your system. In particular, you must have been able to build the firmware with [the `make` command](../#the-make-command).
 
 ## Java
 Eclipse is a Java application, so you will need to install Java 8 or more recent to be able to run it. You may choose between the JRE or the JDK, the latter being useful if you intend to do Java development.

Home.md

@@ -1,31 +1,31 @@
 # Quantum Mechanical Keyboard Firmware
 
-You have found the QMK Firmware documentation site. This is a keyboard firmware based on the [tmk\_keyboard firmware](http://github.com/tmk/tmk_keyboard) \([view differences](Differences-from-TMK)\) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
+You have found the QMK Firmware documentation site. This is a keyboard firmware based on the [tmk\_keyboard firmware](http://github.com/tmk/tmk_keyboard) \([view differences](/Differences-from-TMK.md)\) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
 
 # Getting started
 
 Before you are able to compile, you'll need to install an environment for AVR or ARM development. You'll find the instructions for any OS below. If you find another/better way to set things up from scratch, please consider [making a pull request](https://github.com/qmk/qmk_firmware/pulls) with your changes!
 
-* [Build Environment Setup](Build-Environment-Setup)
-* [QMK Overview](QMK-Overview)
+* [Build Environment Setup](/Build-Environment-Setup.md)
+* [QMK Overview](/QMK-Overview.md)
 
 # Configuring QMK Firmware
 
-The QMK Firmware can be configured via the `keymaps` array data. For simply generating a [basic keycode](Keycodes), you add it as an element of your `keymaps` array data. For more complicated actions, there are more advanced keycodes that are organized carefully to represent common operations, some of which can be found on the [Key Functions](Key-Functions) page.
+The QMK Firmware can be configured via the `keymaps` array data. For simply generating a [basic keycode](/Keycodes.md), you add it as an element of your `keymaps` array data. For more complicated actions, there are more advanced keycodes that are organized carefully to represent common operations, some of which can be found on the [Key Functions](/Key-Functions.md) page.
 
-For more details of the `keymaps` array, see [Keymap Overview](Keymap) page.
+For more details of the `keymaps` array, see [Keymap Overview](/Keymap.md) page.
 
 ## Space Cadet Shift: The future, built in
 
-Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) the Space Cadet Shift quite well. Essentially, you hit the left Shift on its own, and you get an opening parenthesis; hit the right Shift on its own, and you get the closing one. When hit with other keys, the Shift key keeps working as it always does. Yes, it's as cool as it sounds. Head on over to the [Space Cadet Shift](Space-Cadet-Shift) page to read about it.
+Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) the Space Cadet Shift quite well. Essentially, you hit the left Shift on its own, and you get an opening parenthesis; hit the right Shift on its own, and you get the closing one. When hit with other keys, the Shift key keeps working as it always does. Yes, it's as cool as it sounds. Head on over to the [Space Cadet Shift](/Space-Cadet-Shift.md) page to read about it.
 
 ## The Leader key: A new kind of modifier
 
-Most modifiers have to be held or toggled. But what if you had a key that indicated the start of a sequence? You could press that key and then rapidly press 1-3 more keys to trigger a macro, or enter a special layer, or anything else you might want to do. To learn more about it check out the [Leader Key](Leader-Key) page.
+Most modifiers have to be held or toggled. But what if you had a key that indicated the start of a sequence? You could press that key and then rapidly press 1-3 more keys to trigger a macro, or enter a special layer, or anything else you might want to do. To learn more about it check out the [Leader Key](/Leader-Key.md) page.
 
 ## Tap Dance: A single key can do 3, 5, or 100 different things
 
-Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. Read more about it on the [Tap Dance](Tap-Dance) page.
+Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. Read more about it on the [Tap Dance](/Tap-Dance.md) page.
 
 ## Temporarily setting the default layer
 
@@ -33,7 +33,7 @@ Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a co
 
 ## Macro shortcuts: Send a whole string when pressing just one key
 
-How would you like a single keypress to send a whole word, sentence, paragraph, or even document? Head on over to the [Macros](Macros) page to read up on all aspects of Simple and Dynamic Macros.
+How would you like a single keypress to send a whole word, sentence, paragraph, or even document? Head on over to the [Macros](/Macros.md) page to read up on all aspects of Simple and Dynamic Macros.
 
 ## Additional keycode aliases for software-implemented layouts \(Colemak, Dvorak, etc\)
 

Macros.md

@@ -91,7 +91,7 @@ If you have a bunch of macros you want to refer to from your keymap, while keepi
 #define EXT_PLV M(13)
 ```
 
-As was done on the [Planck default keymap](/keyboards/planck/keymaps/default/keymap.c#L33-L40)
+As was done on the [Planck default keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/default/keymap.c#L33-L40)
 
 #### Timer functionality
 

Make-Instructions.md

@@ -21,7 +21,7 @@ As mentioned above, there are some shortcuts, when you are in a:
 * `keyboard` folder, the command will automatically fill the `<keyboard>` part. So you only need to type `<subproject>-<keymap>-<target>`
 * `subproject` folder, it will fill in both `<keyboard>` and `<subproject>`
 * `keymap` folder, then `<keyboard>` and `<keymap>` will be filled in. If you need to specify the `<subproject>` use the following syntax `<subproject>-<target>`
-  * Note in order to support this shortcut, the keymap needs its own Makefile (see the example [here](/doc/keymap_makefile_example.mk))
+  * Note in order to support this shortcut, the keymap needs its own Makefile (see the example [here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_makefile_example.mk))
 * `keymap` folder of a `subproject`, then everything except the `<target>` will be filled in
 
 The `<target>` means the following
@@ -58,7 +58,7 @@ There are 5 different `make` and `Makefile` locations:
 * subproject (`/keyboards/<keyboard>/<subproject>`)
 * subproject keymap (`/keyboards/<keyboard>/<subproject>/keymaps/<keymap>`)
 
-The root contains the code used to automatically figure out which keymap or keymaps to compile based on your current directory and commandline arguments. It's considered stable, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. **The file is required if you want to run `make` in the keymap folder.**
+The root contains the code used to automatically figure out which keymap or keymaps to compile based on your current directory and commandline arguments. It's considered stable, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. **The file is required if you want to run `make` in the keymap folder.**
 
 For keyboards and subprojects, the make files are split in two parts `Makefile` and `rules.mk`. All settings can be found in the `rules.mk` file, while the `Makefile` is just there for support and including the root `Makefile`. Keymaps contain just one `Makefile` for simplicity.
 

Modding-your-keyboard.md

@@ -3,7 +3,7 @@
 
 Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any keyboard that allows access to the C6 port, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
 
-The audio code lives in [quantum/audio/audio.h](/quantum/audio/audio.h) and in the other files in the audio directory. It's enabled by default on the Planck [stock keymap](/keyboards/planck/keymaps/default/keymap.c). Here are the important bits:
+The audio code lives in [quantum/audio/audio.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/audio.h) and in the other files in the audio directory. It's enabled by default on the Planck [stock keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/default/keymap.c). Here are the important bits:
 
 ```
 #include "audio.h"
@@ -36,7 +36,7 @@ float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
 float goodbye[][2] = SONG(GOODBYE_SOUND);
 ```
 
-Wherein we bind predefined songs (from [quantum/audio/song_list.h](/quantum/audio/song_list.h)) into named variables. This is one optimization that helps save on memory: These songs only take up memory when you reference them in your keymap, because they're essentially all preprocessor directives.
+Wherein we bind predefined songs (from [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h)) into named variables. This is one optimization that helps save on memory: These songs only take up memory when you reference them in your keymap, because they're essentially all preprocessor directives.
 
 So now you have something called `tone_plover` for example. How do you make it play the Plover tune, then? If you look further down the keymap, you'll see this:
 

QMK-Overview.md

@@ -30,7 +30,7 @@ The `make` command is how you compile the firmware into a .hex file, which can b
 
 **NOTE:** To abort a make command press `Ctrl-c`
 
-For more details on the QMK build process see [Make Instructions](Make-Instructions).
+For more details on the QMK build process see [Make Instructions](/Make-Instructions.md).
 
 ### Simple instructions for building and uploading a keyboard
 
@@ -63,7 +63,7 @@ There are 2 `config.h` locations:
 * keyboard (`/keyboards/<keyboard>/`)
 * keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`)
 
-The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this:
+The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this:
 
 ```c
 #undef MY_SETTING