[Keyboard] Update encoder code for macro3 (#16005)

keyboards/macro3/config.h

@@ -18,7 +18,7 @@
 #define MATRIX_COLS 4
 
 /* key matrix pins */
-#define DIRECT_PINS { \
+#define DIRECT_PINS {   \
     { D7, C6, D4, D1 }, \
     { B1, B4, B5, B3 }  \
 }

keyboards/macro3/keymaps/default/keymap.c

@@ -12,7 +12,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
     [1] = LAYOUT(
         _______, _______, _______, _______,
-        RESET,   _______, _______, _______
+        QK_BOOT, _______, _______, _______
     )
 };
 

keyboards/macro3/macro3.c

@@ -10,9 +10,9 @@ bool encoder_update_kb(uint8_t index, bool clockwise) {
     if (!encoder_update_user(index, clockwise)) { return false; }
     if (index == 0) {
         if (clockwise) {
-            tap_code(KC_VOLU);
+            tap_code_delay(KC_VOLU, 10);
         } else {
-            tap_code(KC_VOLD);
+            tap_code_delay(KC_VOLD, 10);
         }
     } else if (index == 1) {
         if (clockwise) {

keyboards/macro3/readme.md

@@ -6,7 +6,7 @@ Macro3 is a low-profile macro pad with dual encoder support designed by [@davidp
 
 ## Keyboard Info
 
-* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr)
+* Keyboard Maintainer: [filterpaper](https://github.com/filterpaper), [davidphilipbarr](https://github.com/davidphilipbarr)
 * Hardware Supported: [Macro3](https://github.com/davidphilipbarr/Macropads/tree/main/macro3)
 * Hardware Availability: order PCBs with gerber file from the repository
 
@@ -21,6 +21,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the top right key and plug in the controller.
-* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured.
 * **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.