Porting to KMK

Porting a board to KMK is quite simple, and follows this base format.

import board

from kmk.kmk_keyboard import KMKKeyboard as _KMKKeyboard
from kmk.scanners import DiodeOrientation
{EXTENSIONS_IMPORT}

class KMKKeyboard(_KMKKeyboard):
{REQUIRED}
    extensions = []

REQUIRED

This is designed to be replaced with the defining pins of your keyboard. Rows, colums and the diode direction (if any), should be defined like this

    row_pins = [board.p0_31, board.p0_29, board.p0_02, board.p1_15]
    col_pins = [board.p0_22, board.p0_24, board.p1_00, board.p0_11, board.p1_04]
    diode_orientation = DiodeOrientation.COL2ROW

Additional pins for extensions

KMK includes built in extensions for RGB and split keyboards, and powersave. If these are applicible on your keyboard/microcontroller, the pins should be added here. Refer to the instructions on the respective extensions page on how to add them. If not adding any extensions, leave this as an empty list as shown.

Coord mapping

If your keyboard is not built electrically as a square (though most are), you can provide a mapping directly. An example of this is the Corne. That has 12 colums for 3 rows, and 6 colums for the bottom row. Split keyboards count as the total keyboard, not per side, the right side being offset by the number of keys on the left side, as if the rows were stacked. That would look like this

from kmk.scanners import intify_coordinate as ic

    coord_mapping = []
    coord_mapping.extend(ic(0, x, 6) for x in range(6))
    coord_mapping.extend(ic(4, x, 6) for x in range(6))
    coord_mapping.extend(ic(1, x, 6) for x in range(6))
    coord_mapping.extend(ic(5, x, 6) for x in range(6))
    coord_mapping.extend(ic(2, x, 6) for x in range(6))
    coord_mapping.extend(ic(6, x, 6) for x in range(6))
    # And now, to handle R3, which at this point is down to just six keys
    coord_mapping.extend(ic(3, x, 6) for x in range(3, 6))
    coord_mapping.extend(ic(7, x, 6) for x in range(0, 3))

intify_coordinate is the traditional way to generate key positions. Here's an equivalent, maybe visually more explanatory version:

coord_mapping = [
 0,  1,  2,  3,  4,  5,  24, 25, 26, 27, 28, 29,
 6,  7,  8,  9, 10, 11,  30, 31, 32, 33, 34, 35,
12, 13, 14, 15, 16, 17,  36, 37, 38, 39, 40, 41,
            21, 22, 23,  42, 43, 44,
]

Keymaps

Keymaps are organized as a list of lists. Keycodes are added for every key on each layer. See keycodes for more details on what keycodes are avaliable. If using layers or other extensions, also refer to the extensions page for additional keycodes.

from kb import KMKKeyboard
from kmk.keys import KC

keyboard = KMKKeyboard()

keyboard.keymap = [
    [KC.A, KC.B],
    [KC.C, KC.D],
]

if __name__ == '__main__':
    keyboard.go()

More information

More information on keymaps can be found here

2.9 KiB Raw Blame History