qmk-firmware/keyboards/kmac_pad
2023-02-17 13:14:29 +11:00
..
keymaps/default Remove legacy keycodes, part 5 () 2022-10-15 22:29:43 +01:00
config.h Move LED indicator config to data driven () 2023-02-17 13:14:29 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven () 2023-02-08 18:41:46 +11:00
kmac_pad.c
kmac_pad.h
matrix.c
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven () 2023-02-08 18:41:46 +11:00

KMAC PAD

kmac_pad

KMAC PAD is a num pad keyboard. It can be used independently, but can also be used by connecting with KMAC keyboard case.

Make example for this keyboard (after setting up your build environment):

make kmac_pad:default

Flashing example for this keyboard:

make kmac_pad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

The PCB is hardwired to run the bootloader if the key at the FN position (the only key in first row) is held down when connecting the keyboard.

PCB

Imgur Imgur

Switch Pins

The FN key in the Row 0 is directly connected to the E2 pin.
The rest of the rows below that use MATRIX. (Row 1 ~ Row 5)

Row Pin
0 x (Not in Matrix)
1 D0
2 D1
3 D2
4 D3
5 D5
Column Pin
0 C7
1 C6
2 B6
3 B5

Backlight Pins

There are 2 pins for backlight.

The LED of the FN key uses pin B3. All other keys are connected to the B1 pin.