1f2b1dedcc
* Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation.
65 lines
3.9 KiB
C
65 lines
3.9 KiB
C
// Copyright 2021 Paul Cotter (@gr1mr3aver)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#pragma once
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter ST7789 additional command opcodes
|
|
|
|
// System function commands
|
|
#define ST7789_GET_SELF_DIAG 0x0F // Get self-diagnostic result
|
|
#define ST7789_SET_VERT_SCRL 0x33 // Set vertical scroll definition
|
|
#define ST7789_SET_VERT_SCRL_ADDR 0x37 // SEt Vertical scroll start address
|
|
#define ST7789_SET_MEM_CONT 0x3C // Memory Write continue
|
|
#define ST7789_GET_MEM_CONT 0x3E // Memory Read continue
|
|
#define ST7789_SET_TEAR_LINE 0x44 // Set tear scanline
|
|
#define ST7789_GET_TEAR_LINE 0x45 // Get tear scanline
|
|
#define ST7789_SET_BRIGHTNESS 0x51 // Set display brightness
|
|
#define ST7789_GET_BRIGHTNESS 0x52 // Get display brightness
|
|
#define ST7789_SET_CTRL 0x53 // Set CTRL display
|
|
#define ST7789_GET_CTRL 0x54 // Get CTRL display value
|
|
#define ST7789_SET_CAB_COLOR 0x55 // Set content adaptive brightness control and color enhancement
|
|
#define ST7789_GET_CAB_COLOR 0x56 // Get content adaptive brightness control and color enhancement
|
|
#define ST7789_SET_CAB_BRIGHTNESS 0x5E // Set content adaptive minimum brightness
|
|
#define ST7789_GET_CAB_BRIGHTNESS 0x5F // Get content adaptive minimum brightness
|
|
#define ST7789_GET_ABC_SELF_DIAG 0x68 // Get Auto brightness control self diagnostics
|
|
|
|
// Panel Function Commands
|
|
#define ST7789_SET_RAM_CTL 0xB0 // Set RAM control
|
|
#define ST7789_SET_RGB_CTL 0xB1 // Set RGB control
|
|
#define ST7789_SET_PORCH_CTL 0xB2 // Set Porch control
|
|
#define ST7789_SET_FRAME_RATE_CTL_1 0xB3 // Set frame rate control 1
|
|
#define ST7789_SET_PARTIAL_CTL 0xB5 // Set Partial control
|
|
#define ST7789_SET_GATE_CTL 0xB7 // Set gate control
|
|
#define ST7789_SET_GATE_ON_TIMING 0xB8 // Set gate on timing adjustment
|
|
#define ST7789_SET_DIGITAL_GAMMA_ON 0xBA // Enable digital gamma
|
|
#define ST7789_SET_VCOM 0xBB // Set VCOM
|
|
#define ST7789_SET_POWER_SAVE 0xBC // Set power saving mode
|
|
#define ST7789_SET_DISP_OFF_POWER 0xBD // Set display off power saving
|
|
#define ST7789_SET_LCM_CTL 0xC0 // Set LCM control
|
|
#define ST7789_SET_IDS 0xC1 // Set IDs
|
|
#define ST7789_SET_VDV_VRH_ON 0xC2 // Set VDV and VRH command enable
|
|
#define ST7789_SET_VRH 0xC3 // Set VRH
|
|
#define ST7789_SET_VDV 0xC4 // Set VDV
|
|
#define ST7789_SET_VCOM_OFFSET 0xC5 // Set VCOM offset ctl
|
|
#define ST7789_SET_FRAME_RATE_CTL_2 0xC6 // Set frame rate control 2
|
|
#define ST7789_SET_CABC_CTL 0xC7 // Set CABC Control
|
|
#define ST7789_GET_REG_1 0xC8 // Get register value selection1
|
|
#define ST7789_GET_REG_2 0xCA // Get register value selection2
|
|
#define ST7789_SET_PWM_FREQ 0xCC // Set PWM frequency
|
|
#define ST7789_SET_POWER_CTL_1 0xD0 // Set power ctl 1
|
|
#define ST7789_SET_VAP_VAN_ON 0xD2 // Enable VAP/VAN signal output
|
|
#define ST7789_SET_CMD2_ENABLE 0xDF // Enable command 2
|
|
#define ST7789_SET_PGAMMA 0xE0 // Set positive gamma
|
|
#define ST7789_SET_NGAMMA 0xE1 // Set negative gamma
|
|
#define ST7789_SET_DIGITAL_GAMMA_RED 0xE2 // Set digital gamma lookup table for red
|
|
#define ST7789_SET_DIGITAL_GAMMA_BLUE 0xE3 // Get digital gamma lookup table for blue
|
|
#define ST7789_SET_GATE_CTL_2 0xE4 // Set gate control 2
|
|
#define ST7789_SET_SPI2_ENABLE 0xE7 // Enable SPI2
|
|
#define ST7789_SET_POWER_CTL_2 0xE8 // Set power ctl 2
|
|
#define ST7789_SET_EQ_TIME_CTL 0xE9 // Set equalize time control
|
|
#define ST7789_SET_PROG_CTL 0xEC // Set program control
|
|
#define ST7789_SET_PROG_MODE_ENABLE 0xFA // Set program mode enable
|
|
#define ST7789_SET_NVMEM 0xFC // Set NVMEM data
|
|
#define ST7789_SET_PROG_ACTION 0xFE // Set program action
|