History

Ryan 441988ef38 Move `default` layouts to data driven (#20349 )		2023-04-08 20:50:50 +10:00
..
keymaps	RESET -> QK_BOOT user keymaps (#17940 )	2022-08-21 23:55:30 +01:00
chconf.h
config.h	Move matrix config to info.json, part 1 (#19985 )	2023-03-05 22:53:52 +00:00
info.json	Move `default` layouts to data driven (#20349 )	2023-04-08 20:50:50 +10:00
readme.md
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

Viktus Styrka

The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner). All design done by BlindAssassin111. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock.

The PCB is an arm powered board utilizing the STM32F072CBT6 mcu. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.).

On the PCB is a single button for a reset for flashing. As well, there is a Segger J-Link 6-pin Needle Adapter footprint for reflashing the mcu as a backup in case of a bootloader issue.

Keyboard Maintainer: jrfhoutx, blindassassin111
Hardware Supported: Styrka
Hardware Availability: https://www.Viktus.Design

Make example for this keyboard (after setting up your build environment):

make viktus/styrka:default

Flashing example for this keyboard:

make viktus/styrka:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.