sporq/qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
e08f572673
qmk-firmware/keyboards/4pplet/yakiimo
History
James Young 50ce19462a
4pplet/yakiimo Layout Macro Conversion and Additions (#20436) 
* add matrix_diagram.md

* info.json: apply friendly formatting

* add LAYOUT_tkl_ansi_tsangan_split_bs_rshift

* add LAYOUT_tkl_ansi_tsangan

* add LAYOUT_tkl_iso_tsangan_split_bs_rshift

* add LAYOUT_tkl_iso_tsangan

* enable Community Layout support
2023-04-16 15:33:59 -07:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
rev_a 4pplet/yakiimo Layout Macro Conversion and Additions (#20436) 2023-04-16 15:33:59 -07:00
readme.md

readme.md

Yakiimo Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Yakiimo Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/yakiimo/rev_a:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.