qmk-firmware/keyboards/crkbd/keymaps/soundmonster/keymap.c
Ryan c6f1b594a2
Remove legacy keycodes, part 2 (#18660)
* `KC_SYSREQ` -> `KC_SYRQ`

And one `KC_ALT_ERASE` -> `KC_ERAS`

* `KC_NONUS_BSLASH` -> `KC_NUBS`

* `KC_NUMLOCK` -> `KC_NUM`

* `KC_CLCK` -> `KC_CAPS`

* `KC_SCROLLLOCK` -> `KC_SCRL`

* `KC_LBRACKET` -> `KC_LBRC`

* `KC_RBRACKET` -> `KC_RBRC`

* `KC_CAPSLOCK` -> `KC_CAPS`
2022-10-10 20:06:26 +01:00

362 lines
13 KiB
C

// Copyright 2022 Soundmonster (@soundmonster)
// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layers {
_QWERTY,
_LOWER,
_RAISE,
_ADJUST
};
// Custom keycodes for layer keys
// Dual function escape with left command
#define KC_LGESC LGUI_T(KC_ESC)
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
RGBRST,
KC_RACL // right alt / colon
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,---------------------------------------------.
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|------+------+------+------+------+------| |------+------+-------+------+-------+--------|
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,
//|------+------+------+------+------+------| |------+------+-------+------+-------+--------|
KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSPC,
//|------+------+------+------+------+------+------| |------+------+------+-------+------+-------+--------|
KC_LGESC,LOWER, KC_SPC, RCTL_T(KC_ENT), RAISE, KC_RACL
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_split_3x6_3(
//,---------------------------------------------. ,-----------------------------------------.
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
//|------+------+-------+-------+-------+-------| |------+------+------+------+------+------|
KC_LCTL, KC_NO,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R, KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,KC_NO,KC_NO,
//|------+------+-------+-------+-------+-------| |------+------+------+------+------+------|
KC_LSFT, KC_NO,KC_BTN2,KC_WH_D,KC_WH_U,KC_BTN1, KC_HOME,KC_PGDN,KC_PGUP,KC_END,KC_NO,KC_NO,
//|------+------+-------+-------+-------+-------+------| |------+------+------+------+------+------+------|
KC_LGUI, LOWER,KC_SPC, KC_ENT, RAISE,KC_RALT
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
KC_ESC,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LSFT, KC_F6, KC_F7, KC_F8, KC_F9,KC_F10, KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LGUI, LOWER,KC_SPC, KC_ENT, RAISE,KC_RALT
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
QK_BOOT,RGBRST, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC__MUTE, KC_NO, KC_NO, KC_NO, KC_NO,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,RGB_SPI,KC_NO, KC_PAUSE,KC__VOLUP, KC_NO, KC_NO, KC_NO, KC_NO,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,RGB_SPD,KC_NO, KC_SCRL,KC__VOLDOWN, KC_NO, KC_NO, KC_NO, RGB_RMOD,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LGUI, LOWER,KC_SPC, KC_ENT, RAISE,KC_RALT
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
}
#ifdef OLED_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
void render_space(void) {
oled_write_P(PSTR(" "), false);
}
void render_mod_status_gui_alt(uint8_t modifiers) {
static const char PROGMEM gui_off_1[] = {0x85, 0x86, 0};
static const char PROGMEM gui_off_2[] = {0xa5, 0xa6, 0};
static const char PROGMEM gui_on_1[] = {0x8d, 0x8e, 0};
static const char PROGMEM gui_on_2[] = {0xad, 0xae, 0};
static const char PROGMEM alt_off_1[] = {0x87, 0x88, 0};
static const char PROGMEM alt_off_2[] = {0xa7, 0xa8, 0};
static const char PROGMEM alt_on_1[] = {0x8f, 0x90, 0};
static const char PROGMEM alt_on_2[] = {0xaf, 0xb0, 0};
// fillers between the modifier icons bleed into the icon frames
static const char PROGMEM off_off_1[] = {0xc5, 0};
static const char PROGMEM off_off_2[] = {0xc6, 0};
static const char PROGMEM on_off_1[] = {0xc7, 0};
static const char PROGMEM on_off_2[] = {0xc8, 0};
static const char PROGMEM off_on_1[] = {0xc9, 0};
static const char PROGMEM off_on_2[] = {0xca, 0};
static const char PROGMEM on_on_1[] = {0xcb, 0};
static const char PROGMEM on_on_2[] = {0xcc, 0};
if(modifiers & MOD_MASK_GUI) {
oled_write_P(gui_on_1, false);
} else {
oled_write_P(gui_off_1, false);
}
if ((modifiers & MOD_MASK_GUI) && (modifiers & MOD_MASK_ALT)) {
oled_write_P(on_on_1, false);
} else if(modifiers & MOD_MASK_GUI) {
oled_write_P(on_off_1, false);
} else if(modifiers & MOD_MASK_ALT) {
oled_write_P(off_on_1, false);
} else {
oled_write_P(off_off_1, false);
}
if(modifiers & MOD_MASK_ALT) {
oled_write_P(alt_on_1, false);
} else {
oled_write_P(alt_off_1, false);
}
if(modifiers & MOD_MASK_GUI) {
oled_write_P(gui_on_2, false);
} else {
oled_write_P(gui_off_2, false);
}
if (modifiers & MOD_MASK_GUI & MOD_MASK_ALT) {
oled_write_P(on_on_2, false);
} else if(modifiers & MOD_MASK_GUI) {
oled_write_P(on_off_2, false);
} else if(modifiers & MOD_MASK_ALT) {
oled_write_P(off_on_2, false);
} else {
oled_write_P(off_off_2, false);
}
if(modifiers & MOD_MASK_ALT) {
oled_write_P(alt_on_2, false);
} else {
oled_write_P(alt_off_2, false);
}
}
void render_mod_status_ctrl_shift(uint8_t modifiers) {
static const char PROGMEM ctrl_off_1[] = {0x89, 0x8a, 0};
static const char PROGMEM ctrl_off_2[] = {0xa9, 0xaa, 0};
static const char PROGMEM ctrl_on_1[] = {0x91, 0x92, 0};
static const char PROGMEM ctrl_on_2[] = {0xb1, 0xb2, 0};
static const char PROGMEM shift_off_1[] = {0x8b, 0x8c, 0};
static const char PROGMEM shift_off_2[] = {0xab, 0xac, 0};
static const char PROGMEM shift_on_1[] = {0xcd, 0xce, 0};
static const char PROGMEM shift_on_2[] = {0xcf, 0xd0, 0};
// fillers between the modifier icons bleed into the icon frames
static const char PROGMEM off_off_1[] = {0xc5, 0};
static const char PROGMEM off_off_2[] = {0xc6, 0};
static const char PROGMEM on_off_1[] = {0xc7, 0};
static const char PROGMEM on_off_2[] = {0xc8, 0};
static const char PROGMEM off_on_1[] = {0xc9, 0};
static const char PROGMEM off_on_2[] = {0xca, 0};
static const char PROGMEM on_on_1[] = {0xcb, 0};
static const char PROGMEM on_on_2[] = {0xcc, 0};
if(modifiers & MOD_MASK_CTRL) {
oled_write_P(ctrl_on_1, false);
} else {
oled_write_P(ctrl_off_1, false);
}
if ((modifiers & MOD_MASK_CTRL) && (modifiers & MOD_MASK_SHIFT)) {
oled_write_P(on_on_1, false);
} else if(modifiers & MOD_MASK_CTRL) {
oled_write_P(on_off_1, false);
} else if(modifiers & MOD_MASK_SHIFT) {
oled_write_P(off_on_1, false);
} else {
oled_write_P(off_off_1, false);
}
if(modifiers & MOD_MASK_SHIFT) {
oled_write_P(shift_on_1, false);
} else {
oled_write_P(shift_off_1, false);
}
if(modifiers & MOD_MASK_CTRL) {
oled_write_P(ctrl_on_2, false);
} else {
oled_write_P(ctrl_off_2, false);
}
if (modifiers & MOD_MASK_CTRL & MOD_MASK_SHIFT) {
oled_write_P(on_on_2, false);
} else if(modifiers & MOD_MASK_CTRL) {
oled_write_P(on_off_2, false);
} else if(modifiers & MOD_MASK_SHIFT) {
oled_write_P(off_on_2, false);
} else {
oled_write_P(off_off_2, false);
}
if(modifiers & MOD_MASK_SHIFT) {
oled_write_P(shift_on_2, false);
} else {
oled_write_P(shift_off_2, false);
}
}
void render_logo(void) {
static const char PROGMEM corne_logo[] = {
0x80, 0x81, 0x82, 0x83, 0x84,
0xa0, 0xa1, 0xa2, 0xa3, 0xa4,
0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0};
oled_write_P(corne_logo, false);
oled_write_P(PSTR("corne"), false);
}
void render_layer_state(void) {
static const char PROGMEM default_layer[] = {
0x20, 0x94, 0x95, 0x96, 0x20,
0x20, 0xb4, 0xb5, 0xb6, 0x20,
0x20, 0xd4, 0xd5, 0xd6, 0x20, 0};
static const char PROGMEM raise_layer[] = {
0x20, 0x97, 0x98, 0x99, 0x20,
0x20, 0xb7, 0xb8, 0xb9, 0x20,
0x20, 0xd7, 0xd8, 0xd9, 0x20, 0};
static const char PROGMEM lower_layer[] = {
0x20, 0x9a, 0x9b, 0x9c, 0x20,
0x20, 0xba, 0xbb, 0xbc, 0x20,
0x20, 0xda, 0xdb, 0xdc, 0x20, 0};
static const char PROGMEM adjust_layer[] = {
0x20, 0x9d, 0x9e, 0x9f, 0x20,
0x20, 0xbd, 0xbe, 0xbf, 0x20,
0x20, 0xdd, 0xde, 0xdf, 0x20, 0};
if(layer_state_is(_ADJUST)) {
oled_write_P(adjust_layer, false);
} else if(layer_state_is(_LOWER)) {
oled_write_P(lower_layer, false);
} else if(layer_state_is(_RAISE)) {
oled_write_P(raise_layer, false);
} else {
oled_write_P(default_layer, false);
}
}
bool oled_task_user(void) {
// Renders the current keyboard state (layers and mods)
render_logo();
render_space();
render_layer_state();
render_space();
render_mod_status_gui_alt(get_mods()|get_oneshot_mods());
render_mod_status_ctrl_shift(get_mods()|get_oneshot_mods());
return false;
}
#endif
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
static uint16_t my_colon_timer;
switch (keycode) {
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
case KC_RACL:
if (record->event.pressed) {
my_colon_timer = timer_read();
register_code(KC_RALT);
} else {
unregister_code(KC_RALT);
if (timer_elapsed(my_colon_timer) < TAPPING_TERM) {
SEND_STRING(":"); // Change the character(s) to be sent on tap here
}
}
return false;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
#ifdef RGB_MATRIX_ENABLE
if (record->event.pressed) {
eeconfig_update_rgb_matrix_default();
rgb_matrix_enable();
}
#endif
break;
}
return true;
}
#ifdef RGB_MATRIX_ENABLE
void suspend_power_down_keymap(void) {
rgb_matrix_set_suspend_state(true);
}
void suspend_wakeup_init_keymap(void) {
rgb_matrix_set_suspend_state(false);
}
#endif