History

Ryan a8d440e4e0 Tidy up NKRO_ENABLE rules (#15382 )		2021-12-09 16:05:44 +11:00
..
keymaps	Remove deprecated callbacks for encoders and dip switches (#13404 )	2021-07-24 00:37:19 -07:00
chconf.h
config.h	Require explicit enabling of RGB Matrix modes (#15018 )	2021-11-15 10:41:04 -08:00
halconf.h
hub20.c	[Keyboard] Add LED matrix and 2 layouts to hub20 (#12505 )	2021-06-19 19:21:24 -07:00
hub20.h	[Keyboard] Add LED matrix and 2 layouts to hub20 (#12505 )	2021-06-19 19:21:24 -07:00
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
mcuconf.h
readme.md	Add bootmagic support for hub16 and hub20 (#12257 )	2021-03-17 15:57:51 +11:00
rules.mk	Tidy up NKRO_ENABLE rules (#15382 )	2021-12-09 16:05:44 +11:00

readme.md

Hub20

Hub20 is a 20 key macro pad with an inbuilt USB 2.0 hub and dual rotary encoders. It can be configured to be a left / right hand numberpad, along with a 4x5 1u layout.

For more information regarding the keyboard, please visit the Hub20 Website or GitHub Repo.

Keyboard Maintainer: Josh Johnson
Hardware Supported: Hub20 PCB (STM32F072)
Hardware Availability: Josh Johnson

Make example for this keyboard (after setting up your build environment):

make hub20:default

Flashing example for this keyboard:

make hub20:default:flash

To reset the board into bootloader mode, do one of the following:

Press the reset switch between the center two USB-C ports while the board is plugged in
Hold the top left key while connecting the USB cable (also erases persistent settings)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.