qmk-firmware/keyboards/latin6rgb/config.h
18438880 fc06c143b1
Latin6rgb use IS31FL3731 IC ()
* Create config.h

* Add files via upload

* Create keymap.c

* Create keymap.c

* Create rules.mk

* Update readme.md

* Update keyboards/latin6rgb/rules.mk

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/latin6rgb/rules.mk

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keymap.c

* Update keymap.c

* Update config.h

* Update config.h

Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-24 12:46:03 +10:00

107 lines
3.6 KiB
C

/* Copyright 2021 18438880
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#include "config_common.h"
#define VENDOR_ID 0x7C88 // "hw" = haierwangwei
#define PRODUCT_ID 0x7C96 // "lp" = latin6RGB
#define DEVICE_VER 0x0001
#define MANUFACTURER 18438880
#define PRODUCT Latin6rgb
/* key matrix size */
#define MATRIX_ROWS 2
#define MATRIX_COLS 3
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS {C7, C6 }
#define MATRIX_COL_PINS {F7, F6, F5}
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 3
/* disable these deprecated features by default */
//#ifndef LINK_TIME_OPTIMIZATION_ENABLE
//# define NO_ACTION_MACRO
//# define NO_ACTION_FUNCTION
//#endif
#ifdef RGB_MATRIX_ENABLE
# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define DISABLE_RGB_MATRIX_BAND_SAT
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define DISABLE_RGB_MATRIX_SPLASH
# define DISABLE_RGB_MATRIX_MULTISPLASH
# define DISABLE_RGB_MATRIX_SOLID_SPLASH
# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b1110100 AD <-> GND
// 0b1110111 AD <-> VCC
// 0b1110101 AD <-> SCL
// 0b1110110 AD <-> SDA
#define DRIVER_ADDR_1 0b1110100
//#define DRIVER_ADDR_2 0b1110110
#define DRIVER_COUNT 1
#define DRIVER_1_LED_TOTAL 6
//#define DRIVER_1_LED_TOTAL 25
//#define DRIVER_2_LED_TOTAL 24
//#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
#endif
//#define RGB_DI_PIN B7
//#ifdef RGB_DI_PIN
//#define RGBLIGHT_ANIMATIONS
//#define RGBLED_NUM 8
//#define RGBLIGHT_HUE_STEP 5
//#define RGBLIGHT_SAT_STEP 5
//#define RGBLIGHT_VAL_STEP 5
//#define RGBLIGHT_SLEEP
//#endif
#define B7_AUDIO