qmk-firmware/keyboards/ymd75
2020-10-30 01:32:24 -07:00
..
keymaps [Keyboard] add support for ymd75 rev3 () 2020-10-04 15:19:34 -07:00
rev1 [Keyboard] add support for ymd75 rev3 () 2020-10-04 15:19:34 -07:00
rev2 [Keyboard] add support for ymd75 rev3 () 2020-10-04 15:19:34 -07:00
rev3 YMD75 rev3: fix swapped backslash and enter () 2020-10-30 01:32:24 -07:00
config.h [Keyboard] add support for ymd75 rev3 () 2020-10-04 15:19:34 -07:00
info.json [Keyboard] add support for ymd75 rev3 () 2020-10-04 15:19:34 -07:00
readme.md Rename keyboard-level readmes to lower-case () 2020-10-25 15:23:42 +00:00
rules.mk YMD75: move MCU/Bootloader rules to revision level () 2020-06-18 00:15:22 -07:00
ymd75.c Add support for YMD75 rev 2 () 2020-04-20 00:58:58 +01:00
ymd75.h [Keyboard] add support for ymd75 rev3 () 2020-10-04 15:19:34 -07:00

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.