qmk-firmware/keyboards/planck/keymaps/mollat/keymap.c
Jack Humbert ade22f8e2c
Adds support for Planck Rev 6 ()
* initial files for rev 6 with encoder

* music map init, dip scan added

* adds ws2812 driver for arm

* flesh out dip and encoder support

* adds default encoder res

* adds default encoder res

* start muse implementation

* muse working with encoder as control

* flip direction

* try mouse wheel again

* dont break other revs

* dont break other revs

* conditional autio

* pwm ws driver (not working)

* update build includes for chibios

* update ws2812 driver/config

* last commit for glasser code

* working example

* remove rgb for now

* finish up rev6

* working encoder keycodes

* add warnings to planck keymaps about the LAYOUT
2018-07-16 11:48:31 -04:00

151 lines
7.9 KiB
C

//
// This layout is based on the following needs:
//
// should be as close as possible to querty/us-international layout (using international/AltGr as o/s driver)
// added german umlauts at known places from de-layout
// all movement keys should be at known places from vi/bash (eg HJKL for cursor keys)
// Fn layer (at CapsLock place like the Pok3r does) for missing keys
// additional layer for tmux window switching
//
// This is work in Progress! If you have suggestions write me at github.com/mollat/qmk_firmware/ and check
// this fork for updates as I probably won't bother jack with my pull requests frequently.
//
#pragma message "You may need to add LAYOUT_planck_grid to your keymap layers - see default for an example"
#include "planck.h"
#define _QWERTY 0
#define _HIGH 1
#define _LOW 2
#define _FN 3
#define _TMUX 4
#define _LCTL 5
#define _MOUSE 6
#define __________ KC_NO // just for easy reading
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = { /* Qwerty */
{ LT(_MOUSE, KC_ESC),KC_Q,KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
{ LT(_FN, KC_TAB),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT },
{ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)},
{ __________, __________, KC_LGUI, KC_LALT, KC_LCTL,LT(_TMUX, KC_SPC),LT(_HIGH, KC_SPC),MO(_LOW),KC_RALT,KC_RGUI, __________, __________ }
},
// missing keys regarding to the form factor
// keeping the dot and comma for typing faster IP addresses and (german) float values
// putting the backslash on the slash's place
[_HIGH] = {
{ KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_MINS },
{ __________, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL },
{ __________, __________, __________, __________, __________, __________, __________, __________, KC_COMM, KC_DOT, KC_BSLS, LSFT(KC_BSLS)},
{ __________, __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________, __________ }
},
// classic Fn-Layer triggered with 'CapsLock-key' like on Pok3r
// SPC and ENT are doubled for using repeat (which I switched off, see https://github.com/tmk/tmk_keyboard/issues/287)
// '€' sign is on the '5' position as this is the usual AltGr place on the US Internation layout
// home/end at the 'a' and 'e' position like in bash
// ins at 'i'
// del besides backspace (had no better place for it because of the umlauts)
// pg-down at 'f' (forward in vi), pg-up at 'b' (back in 'vi')
//
[_FN] = {
{ __________, __________, __________, KC_END, __________, __________, __________, __________, KC_INS, __________, KC_DEL, RALT(KC_Y) },
{ KC_TRNS, __________, RALT(KC_S), __________, KC_PGDN, RALT(KC_5), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, RALT(KC_P), RALT(KC_Q) },
{ __________, KC_HOME, __________, __________, __________, KC_PGUP, __________, __________, __________, __________, __________, KC_ENT },
{ RESET, __________, __________, __________, __________, KC_SPC, KC_SPC, __________, __________, __________, __________, __________ }
},
// function key layer and some shift + (missing key at the small form factor)
[_LOW] = {
{ KC_TILD, __________, __________, __________, __________, __________, __________, __________, __________, KC_LCBR, KC_RCBR, KC_UNDS },
{ __________, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_LBRC, KC_RBRC, KC_PLUS },
{ __________, __________, __________, __________, __________, KC_F9, KC_F10, KC_F11, KC_F12, __________, __________, __________ },
{ __________, __________, __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________ }
},
// most macros will switch tmux screens
// two macros are for vi's save/quit at 'w' and 'q'
[_TMUX] = {
{ __________, M(14), M(13), __________, __________, __________, __________, __________, __________, __________, M(11), __________ },
{ M(0), M(1), M(2), M(3), M(4), M(5), M(6), M(7), M(8), M(9), __________, __________ },
{ __________, __________, __________, M(12), __________, __________, M(10), __________, __________, __________, __________, __________ },
{ __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________, __________, __________ }
},
// mouse movement can be improved (e.g. can't press hj at once), but I will use this seldom, so I stick with hjkl keys.
[_MOUSE] = {
{ KC_TRNS, __________, __________, __________, __________, __________, __________, __________, __________, __________, __________, __________ },
{ __________, __________, __________, __________, KC_WH_D, __________, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, __________, __________ },
{ __________, __________, __________, __________, __________, KC_WH_U, __________, __________, __________, __________, __________, __________ },
{ __________, __________, __________, KC_ACL2, KC_ACL1, KC_ACL0, KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, __________, __________, __________ }
}
};
const uint16_t PROGMEM fn_actions[] = {
[_LCTL] = ACTION_MODS_TAP_KEY(KC_LCTL, M(12)), // does not work
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case 0:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_0), END );
break;
case 1:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_1), END );
break;
case 2:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_2), END );
break;
case 3:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_3), END );
break;
case 4:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_4), END );
break;
case 5:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_5), END );
break;
case 6:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_6), END );
break;
case 7:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_7), END );
break;
case 8:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_8), END );
break;
case 9:
// tmux last window
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_L), END );
break;
// tmux next window
case 10:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_N), END );
break;
// tmux previous window
case 11:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_P), END );
break;
// tmux new window
case 12:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_C), END );
break;
case 13:
// vi save document
return MACRODOWN( TYPE(KC_ESC), DOWN(KC_LSFT), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_W), TYPE(KC_ENT), END );
break;
case 14:
// vi quit
return MACRODOWN( TYPE(KC_ESC), DOWN(KC_LSFT), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_Q), TYPE(KC_ENT), END );
break;
// tmux press ctrl-b
case 15:
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), END );
break;
}
return MACRO_NONE;
};