qmk-firmware/keyboards/durgod/dgk6x
2023-04-15 21:09:08 +10:00
..
galaxy Move 75% and 96% layouts to data driven (#20289) 2023-04-05 15:48:37 +10:00
hades_ansi [Keyboard] Add support for ISO version of Durgod Hades (#20110) 2023-04-12 08:36:28 -07:00
hades_iso [Keyboard] Add support for ISO version of Durgod Hades (#20110) 2023-04-12 08:36:28 -07:00
venus Move single 60_ansi, 60_hhkb and 60_iso layouts to data driven (#20438) 2023-04-15 21:09:08 +10:00
config.h Move matrix config to info.json, part 4 (#20001) 2023-03-11 00:00:24 +11:00
dgk6x.c Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
dgk6x.h Move single 60_ansi, 60_hhkb and 60_iso layouts to data driven (#20438) 2023-04-15 21:09:08 +10:00
halconf.h
info.json Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00
mcuconf.h
readme.md [Keyboard] Add support for ISO version of Durgod Hades (#20110) 2023-04-12 08:36:28 -07:00
rules.mk [Keyboard] Add support for ISO version of Durgod Hades (#20110) 2023-04-12 08:36:28 -07:00

DGK6X = Venus, Hades, Galaxy, etc.

This DGK6X code is shared between the ANSI variants of Venus, Hades and Galaxy keyboards.

  • Keyboard Maintainer: J-Sully and dkjer
  • Hardware Supported: Durgod Venus, Hades or Galaxy board with STM32F070RBT6
  • Hardware Availability: Venus, Hades and Galaxy

Instructions

Build

Instructions for building the Venus, Hades and Galaxy firmware can be found here:

Initial Flash

For first Flashing from initial Stock's Firmware

  1. Back up original Firmware Image:
  • Unplug
  • Short Boot0 to Vdd (See below)
  • Plug In USB
  • Make a Flash Image's Backup in case you wanted to restore the Keyboard to Stock's Image:
    • Using dfu-util:

      dfu-util --list
      dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
      
  1. Flash the QMK Firmware Image.
  • Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
  • Here are a few options for performing the initial Flash:
    • Using QMK Toolbox

    • Using dfu-util:

      dfu-util --alt 0 --dfuse-address 0x08000000 --download ${NEW_QMK_BIN}
      

You can short Boot0 to Vdd by shorting R19 to C30 on the sides closest to the processor, as shown:

  • Hades & Venus: Shorting Boot0 to Vdd on Hades or Venus

  • Galaxy 75 Shorting Boot0 to Vdd on Galaxy 75

Subsequent Flashing

For repeating Flashing you can use BootMagic:

  • BootMagic Lite has been enabled with Assigned "Esc" key
  • Unplug USB Cable
  • Holding Esc Button
  • Plug in USB Cable, Keyboard should be in ST-Bootloader state