qmk-firmware/keyboards/converter/usb_usb/rules.mk
Balz Guenat c8222043fc wow, it builds! added empty matrix.c and moved custom matrix code to custom_matrix.cpp
still untested because of hardware availability :(
2017-08-15 23:14:41 -04:00

153 lines
4.6 KiB
Makefile

#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
# TARGET ?= usb_usb
# TMK_DIR ?= ../../tmk_core
# Directory keyboard dependent files exist
# TARGET_DIR ?= .
# MCU name
MCU ?= atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU ?= 8000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH ?= AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB ?= $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# comment out to disable the options.
#
#MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Media control and System control
# CONSOLE_ENABLE ?= yes # Console for debug
CONSOLE_ENABLE ?= no # Console for debug
#COMMAND_ENABLE ?= yes # Commands for debug and configuration
#NKRO_ENABLE ?= yes # USB Nkey Rollover
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096
#LDFLAGS += -Wl,--relax
#OPT_DEFS += -DNO_ACTION_TAPPING
#OPT_DEFS += -DNO_ACTION_LAYER
#OPT_DEFS += -DNO_ACTION_MACRO
CUSTOM_MATRIX = yes
SRC = custom_matrix.cpp
#
# Keymap file
#
# ifeq (yes,$(strip $(UNIMAP_ENABLE)))
# KEYMAP_FILE = unimap
# else
# ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
# KEYMAP_FILE = actionmap
# else
# KEYMAP_FILE = keymap
# endif
# endif
# ifdef KEYMAP
# SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
# else
# SRC := $(KEYMAP_FILE).c $(SRC)
# endif
# CONFIG_H ?= config.h
# Search Path
# VPATH += $(TARGET_DIR)
# VPATH += $(TMK_DIR)
# program Leonardo
# PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -b57600 -Uflash:w:$(TARGET).hex -P$(DEV)
include $(TMK_DIR)/protocol/usb_hid.mk
# include $(TMK_DIR)/protocol/lufa.mk
# include $(TMK_DIR)/common.mk
# include $(TMK_DIR)/rules.mk