qmk-firmware/keyboards/percent/skog_lite
fauxpark efa28d0f5c Convert some PS2AVRGB boards to I2C WS2812 driver (#7241)
* Convert some PS2AVRGB boards to I2C WS2812 driver

* Fix Travis failure for bface
2019-11-04 16:05:03 -08:00
..
keymaps/default [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
config.h [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
info.json [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
readme.md [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
rules.mk Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) 2019-11-04 16:05:03 -08:00
skog_lite.c Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) 2019-11-04 16:05:03 -08:00
skog_lite.h [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
usbconfig.h [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00

Skog Lite

TKL Custom Keyboard.

Keyboard Maintainer: mechmerlin
Hardware Supported: Skog Lite PCB
Hardware Availability: Kono Store

Make example for this keyboard (after setting up your build environment):

make percent/skog_lite:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K05, commonly programmed as F5 while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.