qmk-firmware/keyboards/satan
2019-06-06 12:09:56 -07:00
..
keymaps Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE () 2019-06-06 12:09:56 -07:00
config.h Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE () 2019-06-06 12:09:56 -07:00
info.json Satan: add LAYOUT_60_ansi_split_rshift to info.json () 2018-11-18 08:23:51 -08:00
readme.md [Keyboard] GH60 Satan improvements () 2019-02-28 12:06:26 -08:00
rules.mk [Keyboard] GH60 Satan improvements () 2019-02-28 12:06:26 -08:00
satan.c [Keyboard] GH60 Satan improvements () 2019-02-28 12:06:26 -08:00
satan.h [Keyboard] GH60 Satan improvements () 2019-02-28 12:06:26 -08:00

Satan GH60

A clone of the GH60 60% keyboard, with full backlighting support.

Keyboard Maintainer: QMK Community
Hardware Supported: Satan GH60 PCB
Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/

Make example for this keyboard (after setting up your build environment):

make satan:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

RGB Underglow (WS2812B LED Strip)

This board also supports underglow with a slight mod.

Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:

controller

Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:

power

ISP Header

If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:

1 2 3 4 5 6 7
VCC MISO SCK MOSI RESET GND NC