qmk-firmware/keyboards/percent/canoe
fauxpark 78954a0d3e [Keyboard] Add three missing layouts (#7441)
* Add three missing default layouts

* Add layout support to tragicforce68

* Not really 68%

* Fix dumb mistake

* Update info.json too

* Apply suggestions from code review
2019-11-21 20:25:19 -08:00
..
keymaps [Keyboard] Add three missing layouts (#7441) 2019-11-21 20:25:19 -08:00
canoe.c Convert remaining PS2AVRGB boards to I2C WS2812 driver (#7245) 2019-11-03 14:43:13 -08:00
canoe.h [Keyboard] Add three missing layouts (#7441) 2019-11-21 20:25:19 -08:00
config.h Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00
info.json [Keyboard] Add three missing layouts (#7441) 2019-11-21 20:25:19 -08:00
matrix.c
readme.md
rules.mk [Keyboard] Add three missing layouts (#7441) 2019-11-21 20:25:19 -08:00
usbconfig.h Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00

Canoe

A 65% keyboard with some RGB

Keyboard Maintainer: QMK Community
Hardware Supported: Canoe
Hardware Availability: https://geekhack.org/index.php?topic=92418.0

Make example for this keyboard (after setting up your build environment):

make percent/canoe:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.