qmk-firmware/keyboards/handwired/xealous
Alex Ong 9bd6d6112d Keyboard: xealous ()
* Keyboard: HandWired/XeaL60

* Updated rules.mk

* Mapping for layout was flipped

* Figured out how to re-map bad pins.

* Updated Keymap

* Enabled audio, Forced NKRO

* Added QMK_KEYS_PER_SCAN

* Removed more unnecessary files, since split_keyboards are in main QMK branch already.

* Simplified rules.mk in rev1

* Removed i2c from matrix.c

* Re-formatted to 4 spaces per tab,

* Changed note for NUMPAD

* Added I2C support back!

* Fixed keyboard mappings. Both sides work

* Moved i2c configuration from keymaps/default/config.h to config.h

* Changed SCL_CLOCK to 400000L

* Added DEBUG_MATRIX_SCAN_RATE for future optimization efforts

* Removed row2col code to clean up matrix.c

* Scan rate from 2100 -> 4200 by using Nop instead of waiting 30us between columns.

* Further optimized column reading via optimized_col_reader.

* Immediate key-recognition

* Switched back to own implementation of SPLIT_KEYBOARD. Will optimize so that slave interrupts master.

* Moved scanrate debug messages to another file.

* Made matrix_scanrate.c compile if CONSOLE_ENABLE is off. Updated to latest i2c.c

* Latest i2c uses a few bytes for lighting information

* Optimizations in i2c.h to determine buffer size.

* Disabled a whole bunch of features. TODO: Test that keyboard still works fine.

* Minimum #define NO_ACTION's with still working keyboard

* Fixed matrix not working due to offsets not being respected

* Added numlock button for keymap.

* Use I2C_KEYMAP_START offset

* Removed serial, Backlight and RGB support

* Removed need for split_flags.

* Added audio on and off for numlock.

* Renamed from xeal60 to xealous, simplified build system.

* Used more shared split_common code.

* Updated audio code.

* moved tone_qwerty and tone_numpad to config.h. Removed keymaps/default/config.h

* Added more shortcut keys in _FN layer. Increased debounce to 6ms due to fencepost error.

* DF used with incorrect argument. Custom_keycodes no longer required.

* Fixed bug in update_debounce_counters which was resulting in no debouncing!

* Removed unnecessary #include
2018-08-28 17:08:07 -07:00
..
keymaps/default Keyboard: xealous () 2018-08-28 17:08:07 -07:00
rev1 Keyboard: xealous () 2018-08-28 17:08:07 -07:00
config.h Keyboard: xealous () 2018-08-28 17:08:07 -07:00
info.json Keyboard: xealous () 2018-08-28 17:08:07 -07:00
matrix_scanrate.c Keyboard: xealous () 2018-08-28 17:08:07 -07:00
matrix_scanrate.h Keyboard: xealous () 2018-08-28 17:08:07 -07:00
matrix.c Keyboard: xealous () 2018-08-28 17:08:07 -07:00
readme.md Keyboard: xealous () 2018-08-28 17:08:07 -07:00
rules.mk Keyboard: xealous () 2018-08-28 17:08:07 -07:00

XeaL60

Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards.

Build Guide

A build guide for putting together the Xealous can be found here: https://github.com/alex-ong/Split60

First Time Setup

Download or clone the qmk_firmware repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:

$ make handwired/xeal60/rev1:default

You will see a lot of output and if everything worked correctly you will see the built hex file:

handwired_xeal60_rev1_default.hex

If you would like to use one of the alternative keymaps, or create your own, copy one of the existing keymaps and run make like so:

$ make handwired/xeal60/rev1:YOUR_KEYMAP_NAME

If everything worked correctly you will see a file:

handwired_xeal60_rev1_YOUR_KEYMAP_NAME.hex

For more information on customizing keymaps, take a look at the primary documentation for Customizing Your Keymap in the main readme.md.

Features

For the full Quantum Mechanical Keyboard feature list, see the parent readme.md.

Some features supported by the firmware:

  • Either half can connect to the computer via USB, or both halves can be used independently.
  • I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note this requires an extra wire between halves and pull-up resistors on the data lines.

Required Hardware

Apart from diodes and key switches for the keyboard matrix in each half, you will need:

  • 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
  • 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable

Alternatively, you can use any sort of cable and socket that has at least 4 wires. You will need a cable with at least 4 wires and 2x 4.7kΩ pull-up resistors

Optional Hardware

A speaker can be hooked-up to either side to the 5 (C6) pin and GND, and turned on via AUDIO_ENABLE.

Wiring

The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros.

Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro and modify the matrix.c accordingly.

The wiring for serial:

serial wiring

Notes on Software Configuration

Configuring the firmware is similar to any other QMK project. One thing to note is that MATRIX_ROWS in config.h is the total number of rows between the two halves, i.e. if your split keyboard has 5 rows in each half, then use MATRIX_ROWS=10.

Also, the current implementation assumes a maximum of 8 columns, but it would not be very difficult to adapt it to support more if required.

Flashing

From the top level qmk_firmware directory run make KEYBOARD:KEYMAP:avrdude for automatic serial port resolution and flashing. Example: make handwired/xeal60/rev1:default:avrdude

Choosing which board to plug the USB cable into (choosing Master)

Because the two boards are identical, the firmware has logic to differentiate the left and right board.

It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.

The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.

The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.

Setting the left hand as master

If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out EE_HANDS and comment out I2C_MASTER_RIGHT or MASTER_RIGHT if for some reason it was set.

Setting the right hand as master

If you always plug the usb cable into the right board, add an extra flag to your config.h

 #define MASTER_RIGHT

Setting EE_hands to use either hands as master

If you define EE_HANDS in your config.h, you will need to set the EEPROM for the left and right halves.

The EEPROM is used to store whether the half is left handed or right handed. This makes it so that the same firmware file will run on both hands instead of having to flash left and right handed versions of the firmware to each half. To flash the EEPROM file for the left half run:

avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
// or the equivalent in dfu-programmer

and similarly for right half

avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
// or the equivalent in dfu-programmer

NOTE: replace $(COM_PORT) with the port of your device (e.g. /dev/ttyACM0)

After you have flashed the EEPROM, you then need to set EE_HANDS in your config.h, rebuild the hex files and reflash.

Note that you need to program both halves, but you have the option of using different keymaps for each half. You could program the left half with a QWERTY layout and the right half with a Colemak layout using bootmagic's default layout option. Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the right half is connected.

Notes on Using Pro Micro 3.3V

Do update the F_CPU parameter in rules.mk to 8000000 which reflects the frequency on the 3.3V board.

Also, if the slave board is producing weird characters in certain columns, update the following line in matrix.c to the following:

// _delay_us(30);  // without this wait read unstable value.
_delay_us(300);  // without this wait read unstable value.