43579a80a7
* Added orthodox * Modified readme * Modified readme * Modified readme * Updated makefile * Fixed keymap issues * Modified serial communications to allow for over 8 columns * Fixed sizeof command * Fixed some typing issues * Testing issue #1191 (n-column split i2c slave) Based on initial OrthoDox (serial) config by @reddragond and others, this attempts to add TWI (I2C) support. Relevant: <https://github.com/qmk/qmk_firmware/issues/1191> - per @ahtn recommendation, using memcpy for moving slave matrix into slave sending buffer - slave buffer has been enlarged using sizeof(matrix_row_t) - note: i2c.h now includes matrix.h - note: matrix.c includes <string.h> * Added i2c keymap - right col still not working * orthodox: re-added i2c keymap, based on serial * orthodox / issue #1191: trying 9-bit serial - orthodox serial protocol now sends 9 bits per row, instead of 16. Technically it's using MATRIX_COLS, so it might work generically. - ROW_MASK is #defined in serial.c to truncate the checksums to prevent overflows causing false errors. This macro should be renamed if it's kept. * Revert "Fixed sizeof command" This reverts commit f62a5b9939d6a9c0e442ec403de00c14431a55f9. Changes had been made to the lets_split serial driver for testing which mirrored the multi-byte-row changes made to support the orthodox. As the lets_split does not require these changes, and new improvements had been added to the orthodox port only, this commit reverts them. Because the new code could potentially reduce latency over the serial transport, it may be desirable to re-add in the future, by backporting the current working orthodox code. * orthodox: default serial keymap improvements - formatting has been improved - a few keys have been shifted, mainly in Raise and Lower layers, to be more like the default Planck layout - Now available: F12, Home, End, PgUp, PgDn, Media-Next, Media-Play Still To Do: - duplicate for TWI - Alt modifier - GUI modifier * orthodox: failed attempt at 16b/row TWI - duplicated updated serial keymap for "i2c" - removed string.h/memcpy, instead - hardcoded copying of six bytes per update - still doesn't work; master reports interconnect errors on txled * orthodox: adjusted default keymap - this is applied to both 'serial' and 'i2c' keymaps - Alt and GUI have been added, as they were missing - comma and period persist across more layers; Home/PgUp and End/PgDn have been moved slightly to accommodate * orthodox: revert TWI support to minimum to debug - disabled ssd1306 and hardware locking in build configuration - increased TWI buffer from 0x10 to 0x20 bytes - decreased TWI clock from 400000 to 100000 - removed hardcoded TWI multi-byte sending/receiving An 'i2c' build of this was found to work on a rev1 Orthodox, although slave-side col9 was understandably not working. When testing-time permits, features will be gradually re-enabled towards getting the full matrix supported over TWI. * orthodox: TWI (i2c) is working, kludge for col9 The TWI interconnect ("i2c" in directories and build config) is now working for the Orthodox, including the slave half's column #9. This is intended as an interim solution, as it's a kludge, not a fix. Rather than a working multi-byte implementation, the two col9 keys' bits are packed-into and unpacked-from the two unused bits in row1. Furthermore, the TWI clock constant has been reduced to 100000 from 400000, as testing revealed the higher value just didn't work. Testing also found that (with this kludge) increasing the TWI buffer was not necessary. This commit leaves many commented-out lines in matrix.c from previous testing, which will be removed in a future commit once the interconnects' multi-byte problems have been debugged more thoroughly. * orthodox: updated readme.md The readme for the Orthodox now includes a description of the keyboard, allusions to its author and availability, a linked photo, and links to the evolving build guide and the current keymap on KLE. This update has been prepared with /u/Deductivemonkee's assistance.
363 lines
10 KiB
C
363 lines
10 KiB
C
/*
|
|
pins_arduino.h - Pin definition functions for Arduino
|
|
Part of Arduino - http://www.arduino.cc/
|
|
|
|
Copyright (c) 2007 David A. Mellis
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
This library is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
Lesser General Public License for more details.
|
|
|
|
You should have received a copy of the GNU Lesser General
|
|
Public License along with this library; if not, write to the
|
|
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
|
Boston, MA 02111-1307 USA
|
|
|
|
$Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
|
|
*/
|
|
|
|
#ifndef Pins_Arduino_h
|
|
#define Pins_Arduino_h
|
|
|
|
#include <avr/pgmspace.h>
|
|
|
|
// Workaround for wrong definitions in "iom32u4.h".
|
|
// This should be fixed in the AVR toolchain.
|
|
#undef UHCON
|
|
#undef UHINT
|
|
#undef UHIEN
|
|
#undef UHADDR
|
|
#undef UHFNUM
|
|
#undef UHFNUML
|
|
#undef UHFNUMH
|
|
#undef UHFLEN
|
|
#undef UPINRQX
|
|
#undef UPINTX
|
|
#undef UPNUM
|
|
#undef UPRST
|
|
#undef UPCONX
|
|
#undef UPCFG0X
|
|
#undef UPCFG1X
|
|
#undef UPSTAX
|
|
#undef UPCFG2X
|
|
#undef UPIENX
|
|
#undef UPDATX
|
|
#undef TCCR2A
|
|
#undef WGM20
|
|
#undef WGM21
|
|
#undef COM2B0
|
|
#undef COM2B1
|
|
#undef COM2A0
|
|
#undef COM2A1
|
|
#undef TCCR2B
|
|
#undef CS20
|
|
#undef CS21
|
|
#undef CS22
|
|
#undef WGM22
|
|
#undef FOC2B
|
|
#undef FOC2A
|
|
#undef TCNT2
|
|
#undef TCNT2_0
|
|
#undef TCNT2_1
|
|
#undef TCNT2_2
|
|
#undef TCNT2_3
|
|
#undef TCNT2_4
|
|
#undef TCNT2_5
|
|
#undef TCNT2_6
|
|
#undef TCNT2_7
|
|
#undef OCR2A
|
|
#undef OCR2_0
|
|
#undef OCR2_1
|
|
#undef OCR2_2
|
|
#undef OCR2_3
|
|
#undef OCR2_4
|
|
#undef OCR2_5
|
|
#undef OCR2_6
|
|
#undef OCR2_7
|
|
#undef OCR2B
|
|
#undef OCR2_0
|
|
#undef OCR2_1
|
|
#undef OCR2_2
|
|
#undef OCR2_3
|
|
#undef OCR2_4
|
|
#undef OCR2_5
|
|
#undef OCR2_6
|
|
#undef OCR2_7
|
|
|
|
#define NUM_DIGITAL_PINS 30
|
|
#define NUM_ANALOG_INPUTS 12
|
|
|
|
#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0)
|
|
#define TXLED0 PORTD |= (1<<5)
|
|
#define TXLED1 PORTD &= ~(1<<5)
|
|
#define RXLED0 PORTB |= (1<<0)
|
|
#define RXLED1 PORTB &= ~(1<<0)
|
|
|
|
static const uint8_t SDA = 2;
|
|
static const uint8_t SCL = 3;
|
|
#define LED_BUILTIN 13
|
|
|
|
// Map SPI port to 'new' pins D14..D17
|
|
static const uint8_t SS = 17;
|
|
static const uint8_t MOSI = 16;
|
|
static const uint8_t MISO = 14;
|
|
static const uint8_t SCK = 15;
|
|
|
|
// Mapping of analog pins as digital I/O
|
|
// A6-A11 share with digital pins
|
|
static const uint8_t ADC0 = 18;
|
|
static const uint8_t ADC1 = 19;
|
|
static const uint8_t ADC2 = 20;
|
|
static const uint8_t ADC3 = 21;
|
|
static const uint8_t ADC4 = 22;
|
|
static const uint8_t ADC5 = 23;
|
|
static const uint8_t ADC6 = 24; // D4
|
|
static const uint8_t ADC7 = 25; // D6
|
|
static const uint8_t ADC8 = 26; // D8
|
|
static const uint8_t ADC9 = 27; // D9
|
|
static const uint8_t ADC10 = 28; // D10
|
|
static const uint8_t ADC11 = 29; // D12
|
|
|
|
#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
|
|
#define digitalPinToPCICRbit(p) 0
|
|
#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
|
|
#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
|
|
|
|
// __AVR_ATmega32U4__ has an unusual mapping of pins to channels
|
|
extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
|
|
#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
|
|
|
|
#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
|
|
|
|
#ifdef ARDUINO_MAIN
|
|
|
|
// On the Arduino board, digital pins are also used
|
|
// for the analog output (software PWM). Analog input
|
|
// pins are a separate set.
|
|
|
|
// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
|
|
//
|
|
// D0 PD2 RXD1/INT2
|
|
// D1 PD3 TXD1/INT3
|
|
// D2 PD1 SDA SDA/INT1
|
|
// D3# PD0 PWM8/SCL OC0B/SCL/INT0
|
|
// D4 A6 PD4 ADC8
|
|
// D5# PC6 ??? OC3A/#OC4A
|
|
// D6# A7 PD7 FastPWM #OC4D/ADC10
|
|
// D7 PE6 INT6/AIN0
|
|
//
|
|
// D8 A8 PB4 ADC11/PCINT4
|
|
// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5
|
|
// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6
|
|
// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7
|
|
// D12 A11 PD6 T1/#OC4D/ADC9
|
|
// D13# PC7 PWM10 CLK0/OC4A
|
|
//
|
|
// A0 D18 PF7 ADC7
|
|
// A1 D19 PF6 ADC6
|
|
// A2 D20 PF5 ADC5
|
|
// A3 D21 PF4 ADC4
|
|
// A4 D22 PF1 ADC1
|
|
// A5 D23 PF0 ADC0
|
|
//
|
|
// New pins D14..D17 to map SPI port to digital pins
|
|
//
|
|
// MISO D14 PB3 MISO,PCINT3
|
|
// SCK D15 PB1 SCK,PCINT1
|
|
// MOSI D16 PB2 MOSI,PCINT2
|
|
// SS D17 PB0 RXLED,SS/PCINT0
|
|
//
|
|
// Connected LEDs on board for TX and RX
|
|
// TXLED D24 PD5 XCK1
|
|
// RXLED D17 PB0
|
|
// HWB PE2 HWB
|
|
|
|
// these arrays map port names (e.g. port B) to the
|
|
// appropriate addresses for various functions (e.g. reading
|
|
// and writing)
|
|
const uint16_t PROGMEM port_to_mode_PGM[] = {
|
|
NOT_A_PORT,
|
|
NOT_A_PORT,
|
|
(uint16_t) &DDRB,
|
|
(uint16_t) &DDRC,
|
|
(uint16_t) &DDRD,
|
|
(uint16_t) &DDRE,
|
|
(uint16_t) &DDRF,
|
|
};
|
|
|
|
const uint16_t PROGMEM port_to_output_PGM[] = {
|
|
NOT_A_PORT,
|
|
NOT_A_PORT,
|
|
(uint16_t) &PORTB,
|
|
(uint16_t) &PORTC,
|
|
(uint16_t) &PORTD,
|
|
(uint16_t) &PORTE,
|
|
(uint16_t) &PORTF,
|
|
};
|
|
|
|
const uint16_t PROGMEM port_to_input_PGM[] = {
|
|
NOT_A_PORT,
|
|
NOT_A_PORT,
|
|
(uint16_t) &PINB,
|
|
(uint16_t) &PINC,
|
|
(uint16_t) &PIND,
|
|
(uint16_t) &PINE,
|
|
(uint16_t) &PINF,
|
|
};
|
|
|
|
const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
|
|
PD, // D0 - PD2
|
|
PD, // D1 - PD3
|
|
PD, // D2 - PD1
|
|
PD, // D3 - PD0
|
|
PD, // D4 - PD4
|
|
PC, // D5 - PC6
|
|
PD, // D6 - PD7
|
|
PE, // D7 - PE6
|
|
|
|
PB, // D8 - PB4
|
|
PB, // D9 - PB5
|
|
PB, // D10 - PB6
|
|
PB, // D11 - PB7
|
|
PD, // D12 - PD6
|
|
PC, // D13 - PC7
|
|
|
|
PB, // D14 - MISO - PB3
|
|
PB, // D15 - SCK - PB1
|
|
PB, // D16 - MOSI - PB2
|
|
PB, // D17 - SS - PB0
|
|
|
|
PF, // D18 - A0 - PF7
|
|
PF, // D19 - A1 - PF6
|
|
PF, // D20 - A2 - PF5
|
|
PF, // D21 - A3 - PF4
|
|
PF, // D22 - A4 - PF1
|
|
PF, // D23 - A5 - PF0
|
|
|
|
PD, // D24 - PD5
|
|
PD, // D25 / D6 - A7 - PD7
|
|
PB, // D26 / D8 - A8 - PB4
|
|
PB, // D27 / D9 - A9 - PB5
|
|
PB, // D28 / D10 - A10 - PB6
|
|
PD, // D29 / D12 - A11 - PD6
|
|
};
|
|
|
|
const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
|
|
_BV(2), // D0 - PD2
|
|
_BV(3), // D1 - PD3
|
|
_BV(1), // D2 - PD1
|
|
_BV(0), // D3 - PD0
|
|
_BV(4), // D4 - PD4
|
|
_BV(6), // D5 - PC6
|
|
_BV(7), // D6 - PD7
|
|
_BV(6), // D7 - PE6
|
|
|
|
_BV(4), // D8 - PB4
|
|
_BV(5), // D9 - PB5
|
|
_BV(6), // D10 - PB6
|
|
_BV(7), // D11 - PB7
|
|
_BV(6), // D12 - PD6
|
|
_BV(7), // D13 - PC7
|
|
|
|
_BV(3), // D14 - MISO - PB3
|
|
_BV(1), // D15 - SCK - PB1
|
|
_BV(2), // D16 - MOSI - PB2
|
|
_BV(0), // D17 - SS - PB0
|
|
|
|
_BV(7), // D18 - A0 - PF7
|
|
_BV(6), // D19 - A1 - PF6
|
|
_BV(5), // D20 - A2 - PF5
|
|
_BV(4), // D21 - A3 - PF4
|
|
_BV(1), // D22 - A4 - PF1
|
|
_BV(0), // D23 - A5 - PF0
|
|
|
|
_BV(5), // D24 - PD5
|
|
_BV(7), // D25 / D6 - A7 - PD7
|
|
_BV(4), // D26 / D8 - A8 - PB4
|
|
_BV(5), // D27 / D9 - A9 - PB5
|
|
_BV(6), // D28 / D10 - A10 - PB6
|
|
_BV(6), // D29 / D12 - A11 - PD6
|
|
};
|
|
|
|
const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
TIMER0B, /* 3 */
|
|
NOT_ON_TIMER,
|
|
TIMER3A, /* 5 */
|
|
TIMER4D, /* 6 */
|
|
NOT_ON_TIMER,
|
|
|
|
NOT_ON_TIMER,
|
|
TIMER1A, /* 9 */
|
|
TIMER1B, /* 10 */
|
|
TIMER0A, /* 11 */
|
|
|
|
NOT_ON_TIMER,
|
|
TIMER4A, /* 13 */
|
|
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
NOT_ON_TIMER,
|
|
};
|
|
|
|
const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
|
|
7, // A0 PF7 ADC7
|
|
6, // A1 PF6 ADC6
|
|
5, // A2 PF5 ADC5
|
|
4, // A3 PF4 ADC4
|
|
1, // A4 PF1 ADC1
|
|
0, // A5 PF0 ADC0
|
|
8, // A6 D4 PD4 ADC8
|
|
10, // A7 D6 PD7 ADC10
|
|
11, // A8 D8 PB4 ADC11
|
|
12, // A9 D9 PB5 ADC12
|
|
13, // A10 D10 PB6 ADC13
|
|
9 // A11 D12 PD6 ADC9
|
|
};
|
|
|
|
#endif /* ARDUINO_MAIN */
|
|
|
|
// These serial port names are intended to allow libraries and architecture-neutral
|
|
// sketches to automatically default to the correct port name for a particular type
|
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
|
//
|
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
|
//
|
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
|
//
|
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
|
//
|
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
|
//
|
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
|
// pins are NOT connected to anything by default.
|
|
#define SERIAL_PORT_MONITOR Serial
|
|
#define SERIAL_PORT_USBVIRTUAL Serial
|
|
#define SERIAL_PORT_HARDWARE Serial1
|
|
#define SERIAL_PORT_HARDWARE_OPEN Serial1
|
|
|
|
#endif /* Pins_Arduino_h */
|