sporq/qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3d0f03f21e
qmk-firmware/keyboards/handwired/tractyl_manuform/5x6_right/f303
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
f303.c
f303.h
halconf.h
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
mcuconf.h Fixup ChibiOS header inclusion search ordering. (#19623) 2023-01-19 01:05:29 +00:00
readme.md weact docs patch re "security vulnerability" (#19572) 2023-01-12 22:29:25 +11:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball

  • Split Hand Pin, using PC14

  • Full Duplex Serial/USART using PA9 and PA10 on USART1

  • DAC Audio using PA4 and PA5

  • PWM RGB using PA6 TIM3

  • pmw3360 sensor using PA5-PA7 on SPI2, with B as CS pin

  • 8KB SPI EEPROM chip sharing PB13-PB15 on SPI1 with PB9 as CS pin

  • Encoder using PA7 and PA8

  • SSD1306 OLED display (128x64) using PB6 and PB7 on I2C1

  • Keyboard Maintainer: Drashna Jael're

  • Hardware Supported: Design files, WeAct BlackPill (F411), PMW3360 Optical Sensor

Make example for this keyboard (after setting up your build environment):

make handwired/tractyl_manuform/5x6_right/f411:default

Flashing example for this keyboard:

make handwired/tractyl_manuform/5x6_right/f411:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.