sporq/qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3b67310bef
qmk-firmware/keyboards/yushakobo/navpad/10_helix_r
History
Ryan 23c365b023
Move matrix config to info.json, part 1 (#19985)
2023-03-05 22:53:52 +00:00
..
keymaps/default Remove legacy EEPROM clear keycodes (#18782) 2022-10-20 12:20:07 +01:00
10_helix_r.c
10_helix_r.h
config.h Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
info.json Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

navpad 1.0 with Helix (Right hand side)

10_helix_r

Navpad connected with helix keyboard (Right Side)

Make example for this keyboard (after setting up your build environment):

make yushakobo/navpad/10_helix_r:default

Flashing examples for this keyboard...

Helix side:

make yushakobo/navpad/10_helix_r:default:avrdude-split-right

Navpad side:

make yushakobo/navpad/10_helix_r:default:avrdude-split-left

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available