qmk-firmware/keyboards/yushakobo/navpad/10_helix_r
2023-02-17 16:08:25 +11:00
..
keymaps/default Remove legacy EEPROM clear keycodes (#18782) 2022-10-20 12:20:07 +01:00
10_helix_r.c
10_helix_r.h
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

navpad 1.0 with Helix (Right hand side)

10_helix_r

Navpad connected with helix keyboard (Right Side)

Make example for this keyboard (after setting up your build environment):

make yushakobo/navpad/10_helix_r:default

Flashing examples for this keyboard...

Helix side:

make yushakobo/navpad/10_helix_r:default:avrdude-split-right

Navpad side:

make yushakobo/navpad/10_helix_r:default:avrdude-split-left

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available