History

Drashna Jaelre faaaa134fd Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997 )		2019-06-06 12:09:56 -07:00
..
keymaps	Migrate fn_actions for default keymaps (#4935 )	2019-02-14 20:07:13 -08:00
config.h	Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955 )	2019-01-27 00:28:40 -08:00
dactyl.c	Bring dactyl/matrix.c in line with quantum/matrix.c (#2613 )	2018-04-27 14:47:41 -04:00
dactyl.h	Handwired/Dactyl refactor and Configurator support (#3222 )	2018-06-22 17:24:52 -07:00
i2cmaster.h
info.json	Handwired/Dactyl refactor and Configurator support (#3222 )	2018-06-22 17:24:52 -07:00
matrix.c	Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997 )	2019-06-06 12:09:56 -07:00
readme.md	Fix build instructions in the Dactyl readme	2017-11-26 17:56:16 -05:00
rules.mk	Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency	2018-03-16 16:33:43 -04:00
twimaster.c

Dactyl

The Dactyl uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

Build the firmware with make handwired/dactyl:<keymapname>, for example make handwired/dactyl:default
This will result in a hex file called handwired_dactyl_<keymapname>.hex, e.g. handwired_dactyl_default.hex
Start the teensy loader.
Load the .hex file into it.
Put the Teensy in firmware-loading mode:
- If your current layout has a RESET key, press it.
- If you lack a RESET key, press the reset button on the Teensy board itself.
Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

Build the firmware as above
Run <path/to/>teensy_loader_cli -mmcu=atmega32u4 -w handwired_dactyl_<keymapname>.hex
If you like, you can do both at once: make handwired/dactyl:<keymapname>:teensy
Put the Teensy in firmware-loading mode:
- If your current layout has a RESET key, press it.
- If you lack a RESET key, press the reset button on the Teensy board itself.