/* Copyright 2021 Mechlovin' Studio This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #define MATRIX_ROW_PINS { A4, A3, C13, A1, A2} #define MATRIX_COL_PINS { B10, B11, B2, B1, B0, A6, A5, A10, A9, A15, B3, B4, B5, B8, B9 } #ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN A7 #define WS2812_SPI SPID1 // default: SPID1 #define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 #define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL #define RGBLIGHT_EFFECT_SNAKE #define RGBLIGHT_EFFECT_KNIGHT #define RGBLIGHT_EFFECT_CHRISTMAS #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif #ifdef RGB_MATRIX_ENABLE //rgb matrix setting // This is a 7-bit address, that gets left-shifted and bit 0 // set to 0 for write, 1 for read (as per I2C protocol) // The address will vary depending on your wiring: // 0b1110100 AD <-> GND // 0b1110111 AD <-> VCC // 0b1110101 AD <-> SCL // 0b1110110 AD <-> SDA #define DRIVER_ADDR_1 0b0110010 #define DRIVER_COUNT 1 #define DRIVER_LED_TOTAL 66 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set #define ENABLE_RGB_MATRIX_ALPHAS_MODS #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT #define ENABLE_RGB_MATRIX_BREATHING #define ENABLE_RGB_MATRIX_BAND_SAT #define ENABLE_RGB_MATRIX_BAND_VAL #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL #define ENABLE_RGB_MATRIX_CYCLE_ALL #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT #define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN #define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL #define ENABLE_RGB_MATRIX_DUAL_BEACON #define ENABLE_RGB_MATRIX_RAINBOW_BEACON #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS #define ENABLE_RGB_MATRIX_RAINDROPS #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS #define ENABLE_RGB_MATRIX_HUE_BREATHING #define ENABLE_RGB_MATRIX_HUE_PENDULUM #define ENABLE_RGB_MATRIX_HUE_WAVE #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL #define ENABLE_RGB_MATRIX_PIXEL_RAIN #define ENABLE_RGB_MATRIX_TYPING_HEATMAP #define ENABLE_RGB_MATRIX_DIGITAL_RAIN #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS #define ENABLE_RGB_MATRIX_SPLASH #define ENABLE_RGB_MATRIX_MULTISPLASH #define ENABLE_RGB_MATRIX_SOLID_SPLASH #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define RGB_MATRIX_DISABLE_KEYCODES #define I2C1_CLOCK_SPEED 400000 #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 #endif #ifdef ENCODER_ENABLE #define ENCODERS_PAD_A { B12 } #define ENCODERS_PAD_B { B13 } #define ENCODER_RESOLUTION 4 #define TAP_CODE_DELAY 10 #endif #define LED_NUM_LOCK_PIN A0 #define LED_CAPS_LOCK_PIN C14 #define LED_SCROLL_LOCK_PIN C15