/* Copyright 2020 Matthew Tso (zoo) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ #define MATRIX_ROW_PINS { C13, C14, A5, A4, A3 } #define MATRIX_COL_PINS { A10, A9, A8, B12, A15, A13, A7, A2, A1, A0, F1, F0, B3, B4, B5 } /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW #define LED_NUM_LOCK_PIN B0 #define LED_CAPS_LOCK_PIN B8 #define LED_SCROLL_LOCK_PIN B9 // In-switch LED defines #define BACKLIGHT_PIN A6 #define BACKLIGHT_LEVELS 3 #define BACKLIGHT_BREATHING #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 1 // RGB Underglow WS2812 Matrix defines #define RGBLIGHT_ANIMATIONS #define RGB_DI_PIN B15 #define RGBLED_NUM 20 // SPI RGB Driver #define WS2812_SPI SPID2 #define WS2812_SPI_MOSI_PAL_MODE 0 #define WS2812_SPI_SCK_PAL_MODE 0 #define WS2812_SPI_SCK_PIN B13 // OLED defines #define OLED_TIMEOUT 60000 #define I2C1_SCL_PAL_MODE 1 #define I2C1_SDA_PAL_MODE 1 /* This configures the I2C clock to 400khz assuming a 48Mhz clock */ #define I2C1_TIMINGR_SCLDEL 3U #define I2C1_TIMINGR_SDADEL 1U #define I2C1_TIMINGR_SCLH 3U #define I2C1_TIMINGR_SCLL 9U /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE