* Port DIRECT_PINS from split_common/matrix.c to matrix.c
* Reorder matrix.c to remove foward declaration and match split_common/matrix.c
* Refactor nano to use DIRECT_PINS
* Reorder matrix.c to remove foward declaration and match split_common/matrix.c
* Add DIRECT_PINS documentation
* Reorder matrix.c to remove foward declaration and match split_common/matrix.c - fix logic from inherited from split_common
* Add DIRECT_PINS documentation - review comments
* Revert "Update build instructions and Dockerfile to download submodules"
This reverts commit 93210547bd.
* Update build tools docs based on feedback
* Fix bad link in build tools docs
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance
* Updating effect function api for future extensions
* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary
* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
* Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes
* fix bug in quantum/rgb_matrix_drivers.c
Co-Authored-By: jackhumbert <jack.humb@gmail.com>
* update command setting to the correct default
* correct rgb config
* remove commented-out lines
* update docs for the 3737
* Update docs/feature_rgb_matrix.md
Co-Authored-By: jackhumbert <jack.humb@gmail.com>
Since combos keep local state about what keys have been previously pressed, when combos are layered, multiple keypresses will register for any key with multiple combos assigned to it. In order to fix this, I switched process_combo to use a global keycode / keyrecord register and timer. When a keypress is consumed by a combo, it gets stored in the register and the timer is updated; when the next keypress takes too long or a key is pressed that isn't part of any combo, the buffer is emitted and the timer reset. This has a few side effects. For instance, I couldn't _not_ fix combo keys printing out of order while also fixing this bug, so combo keys print in order correctly when a combo fails. since combos no longer have local timers, the logic around when combos time out has changed. now that there is a single timer pressing any combo key (including one in a different combo) will reset the timer for all combos, making combo entry a little more lenient. Since combos no longer have local keycode / keyrecord state, there is an edge case where incomplete combo keys can be consumed. if you have a combo for a+s = tab and a combo for b+n = space, if you press a+b+n, only a space will be emitted. This is because when b+n completes successfully, it drops the register.
* Refactor 4x4 in line with current ps2avrgb template
* Add backlight pwm bodge till #4324 lands
* Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID
* remove unneeded uart setting
* use pragma once everywhere
* remove custom matrix support
* fixup readme
* set bootmagic to lite
* remove dependency on custom i2c code
* use the right header files and function calls
* remove bootmagic support as it doesn't work on bmc boards
* readme merge artifacts removal
* pragma once it all
* put amnesia's name everywhere
* fixup readme
* remove custom matrix
* remove unneccessary configs
* disable bootmagic
* remove custom i2c in favor of i2c_master
* fix rgb led num
* add in rgb underglow support
* Refactor jj40 in line with current ps2avrgb template
* Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID
* Add backlight pwm bodge till #4324 lands
* Increase planck keymap compatibility
* use pragma once
* modified readme with maintainer info
* remove rev1 for the time being
* QMK Configurator support for 60_ansi and 60_ansi_split_bs_rshift
* add hhkb layout and QMK Configurator support
* fix compile issue due to missing DEVICE_VER
* use a saner and less complicated default layout
* remove unused file
* fix up LAYOUT_all and formatting along with QKM Configurator support
* turn on bootmagic lite as the hardware reset switch isn't in a standard position
* remove default folder
* Added Waldo keyboard base files and default keymap
* Updated Waldo files and added keymap for split shift and split backspace
* Updated meta-data for the Waldo board
* Apply suggestions from code review
Committing suggestions for real this time.
Co-Authored-By: That-Canadian <Poole.Chris.11@gmail.com>
* Made suggested changes that were not explicitly made.
* Add keyboard Signum 3.0 for the elite-c
* Update readme.md
* Remove unused macros
* Use bootmagic lite instead of full
* Add warning to keymap.c that it's auto-generate
* Add description for customizing keyboard layouts
* Make generate_km.py executable
* Make right shift available in numpad layer
* Update keyboards/signum/3_0/elitec/readme.md
Co-Authored-By: jceb <jceb@e-jc.de>
* Update keyboards/signum/3_0/elitec/readme.md
Co-Authored-By: jceb <jceb@e-jc.de>
* Fix typo in symbol name
* remove dependency on custom i2c code
* missed a pragma once
* fix readme install instructions
* config.h cleanup
* make the bootmagic key not the same bmc reset key
* disable bootmagic functionality as it doesn't seem to work on atmega32a bmc boards
* remove custom i2c code in favor of QMK i2c_master
* clean up config file
* fix pyusb install instructions
* fix naming in usbconfig.h
* disable bootmagic as it does not work for bmc boards
* Update macros and keycode handling
- Update NUBS_Z macro so it repeats when held down
- Number row now uses numpad keycodes if Right Alt is being held
- coding conventions and formatting update
- switched to four-space indent
- reformatted a block comment
* Update readme files
* remove unneeded uart setting
* use pragma once everywhere
* remove custom matrix support
* fixup readme
* set bootmagic to lite
* remove dependency on custom i2c code
* use the right header files and function calls
* On i2c_init, enable two wire interface, twi interrupt, and slave
address ACK along with pull up resistors.
* thanks to some testing by drashna, we know that setting TWI doesn't work for all boards. Putting the new code into an ifdef block
* Add new keyboard: NQG
* Delete .gitignore
.gitignore removed
Originally used to ignore .DS_Store files from being committed.
* Changed Maintainer information
Maintainer link now points to a github account.
* Add customizable tapping terms
* Add Documentation
* Fix function
* Fixes
* It's not a pointer
* Add debugging output
* Update documentation to be at least vaguely accurate
* Use `get_tapping_term(tapping_key.event)` instead
`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.
However `tapping_key.event` actually gives the correct column and row information. It appears be the correct structure to use.
In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h
* Use variable tapping term value rather than define
* Silly drashna - tapping_key.event, not event
* add get_event_keycode() function
* Fix typo
Co-Authored-By: drashna <drashna@live.com>
* Remove post_process_record_quantum since it's the wrong PR
* Update quantum/quantum.c
Co-Authored-By: drashna <drashna@live.com>
* Better handle ifdef statement for permissive hold
Since we can't be sure that tapping term is actually 500
* Update quantum.c comments based on feedback
* Clean up get_tapping_term function
Clean up function so that users don't need to call the event function, and instead only check the keycode
* Add ability to run functionality on and off
* Make ifdef's more compact
* initial commit of budget96
* non logic changes
* add my name to readme
* update matrix.c
* make the matrix representation of the layout macro
* fix up LAYOUT macro
* add missing character
* initial keymap commit
* put KC_NO where they belong
* basic keymap
* fix matrix row and col definition
* The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues
* update the readme
* change up manufacturer for budget96
* update copyright date
* fix up the switch matrix and provide a keymap
* forgot the keymap
* other matrix fixes
* missing a few keys in the switch matrix
* messed up the row tracing
* tweak keymap a bit
* use a lower case k
* fix spacing for markdown rendering
* put in the reset key documentation
* clean up the file a little
* use LAYOUT_96_ansi
* add a second layer for lighting controls
* add in lighting support
* add QMK Configurator support
* use pragma once
* remove un needed matrix.c
* convert to GPIO methods
* turn on rgblight_enable and get rid of custom matrix
* set bootloadhid_bootloader to 1
* set bootmagic to lite and set it to k50
* add reset information to readme
* use i2c_master instead of custom i2c
* restore the custom i2c code
* introduce reset key and eep_rst in function layer 1
* fix up pip3 install commands
* fix up device and manufacturer names
* remove un needed comments
* add an ALL layout macro along with QMK Configurator support
* move budget96 into donutcables directory since he actually has different boards
* add a short donut cables blurb taken from his website
* update readme for make instructions to point to the new path
* Update keyboards/donutcables/budget96/config.h
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/donutcables/budget96/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/donutcables/budget96/info.json
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* turn on backlight
* Update keyboards/donutcables/budget96/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* remove extra UART and BOOTLOADER settings that are not needed
