* new keyboard for squiggle.
* added pic and other layout.
* updated readme.
* following drashna's suggestions.
* removed an empty line and right hand as master.
* following fauxpark's suggestions.
* following manna-harbour's suggestions.
* trying to satisfy PR Lint keyboards
* manna-harbour forgot to add it.
* following fauxparx's suggestions.
* following fauxpark's suggestions.
* following fauxpark's suggestions.'
'
* following fauxpark's suggestions.
* following fauxpark''s suggestions.
* upated info.json to represent the actual layouts.
* following noroadsleft's suggestions.
* Add new keyboard, the N87
* Deleted config.h and readme.md on tsangan keymap folder
* Edited layout names on keymap.c and n87.h. Disabled audio
* Edited files based on requested changes, re-enabled audio on extra data pin B7, enabled audio click, disabled music mode
* Updated the wiring matrix for symmetric_standard layout
* start of punk75 keyboard
* preliminary code for the punk75 keyboard
* readme
* changes to work with USBasp
* changed cols and added configurable led
* set LED's pin as output
* changed led to new port and added rotary encoders
* added code for rotary encoders
* fixed col pins
* fixed encoder orientation
* added delay for tap_code so encoder works as intended
* added preliminary keymap for mine
* personal keymap for punk75
* personal keymap for punk75
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* fixed image
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Write firmware for the Ferris keyboard
Took inspiration from the gergoplex and the ergodox_ez firmware for the
split matrix with io_expander on the right hand.
Cleaned up a lot of bit fiddling on the mcu side by taking inspiration
from the `split_custom` in quantum.
Still bit fiddling on the mcp side as it is particularly natural to do
so with the abstractions provided by the i2c protocol. Would be good to
clean that up and abstract away the wiring from the generic i2c code in
a similar fashion as quantum and the mcp side behave.
One improvement over the ergodox_ez and the gergoplex firmwares is that
the wiring is straight forward as opposed to swapping rows and columns
in two different places that end up cancelling out for some reason.
At this stage, I have flashed this firmware to a board and have verified
that all keys are behaving as intended by shorting pins.
I still have to solder in some switches and test that everything works
correctly at normal typing speeds, but I don't expect any major issues
given I'm building up on previous effort, including the debouncing code
from the ergodox_ez.
* Remove rotation from info.json and label the keys as per default keymap
* Comply with minor review feedback points
* Use CUSTOM_MATRIX=lite to remove boilerplate
* Update keyboards/handwired/ferris/info.json
Didn't play nicely in the configurator
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove MIDI_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove FAUXCLICKY_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Prefer wait_ms over _delay_ms
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused includeh
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use dprint over print and remove include for print.h
* Remove all unused includes
* Remove unused code
* Cleanups thanks to code review
* Move more personal settings from the ferris config to the default keymap config
These setting happen to be unused in the default keymap at the moment,
as it has only one layer with no homerow modifiers and no mouse key; but
I would like to keep it there for two reasons:
* It can serve as an example to people creating their own keymap
* I plan to design a more usable default keymap that uses these features
once this PR which adds the Ferris keyboard is merged.
* Consolidate mcp logic inside matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* readded adelheid files
* reworked keymaps
- moved my personal keymap to a new folder
- added a new default keymap
* removed unnecessary backslash
* reenabled command rule
* bumped device number
* fixed layout for configurator
* applied suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821dbb22957b66cdedb0d11f996def71c.
* Add Alter keyboard
* Fixed keymap.c
* Fixed another issue on the keymap.c
* Updated the files based on the comments
* Edited default keymap and enabled rgbanimations on config.h
* Updated the info.json
* via support for the skog lite
* some code cleanup before submission
* Update keyboards/percent/skog_lite/keymaps/via/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/percent/skog_lite/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update info.json
* Update keyboards/kbdfans/maja/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/maja/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* update keymap
* update ilpse template as well
* fix some key items
* move quote the first layer
* figure out brackets
* update ilpse keymap
* update arrow keys on alice
* change layers
* update layers again
* switch to vim keys
* add mouse keys
Co-authored-by: Khader Syed <khader.syed@aicure.com>
- Fix typo in the default layout.
- Move esc and del to the navi layer.
- Fix issue with oneshot layers and double tap aka DBL_TAP.
- Add caps lock to the raise layer.
Was relying on a broken behavior for the double tap to work with
oneshot keys, i.e. the oneshot layer not being cleared after a key
press in `process_record_user`, which allowed me to first press an
oneshot key, then double tap and then a key. With the behavior fixed,
this no longer works. As the oneshot layer will be cleared when double
tap is pressed.
To make double tap useful again. I changed that any of the layer keys
does not clear the double tap. Which allows me for example to first
press double tap, then an oneshot key and then a key. So now I'm able
to type my double symbols again.
* Re-enable mouse keys to fix Chrome OS media keys
I'm not sure if there's a bug in Chrome OS, QMK, or both, but
EXTRAKEY_ENABLE isn't sufficient for media keys to work on Chrome OS.
Instead, MOUSEKEY_ENABLE is also required.
* Remove unnecessary SPLIT_USB_DETECT for Lily58
I've since swapped my Lily58 back to Elite-C v2 controllers with working
VBUS detection.
* Move Crkbd Esc and Ctrl keys; add some shortcuts
* Move MC_ALTT to userspace for cross-board support
* Sync Lily58 keymap with Crkbd
* Fix typos
* Added Handwired Redragon Keyboard as well as default and via keymaps
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keymap.c
Removed defined keycodes from via keymap
* Update keymap.c
replaced defined keycodes in default keymap
* Update readme.md
Changed image to one that matches the physical keyboard
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add support for YDKB Chili
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Updated VIA Support
- Added LAYOUT_all Support for VIA compatibility
- Updated default dp60\layouts\via\keymap.c to mmirror changes to
LAYOUT_all
- Rules.mk updated in both base and via directories.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
Co-authored-by: Will <wailinnyu@gmail.com>
Co-authored-by: Andrew Koh <andrew@springlabs.com>
Apparently VIA allocates bits in the layout options field from the
lowest bit, but starting from the **last** option defined in the JSON
file. So the default value 0x06 was actually trying to set the value
`3` (`0b11`) for the second-to-last option ("Right Shift"), which had
only 3 values defined, and the attempt to set an undefined option value
caused the VIA app to hang with a black window.
Fix the default layout options so that it works as intended (the
"Macropad" and "65% Column" options are set).
* Started AHK Companion Development
* Updated the readme
* Added AutoHotKey companion file
* Updated documentation
* Cleaned up the files and revised documentation
* Finished the readme.md updates
* Fixed the LED issue where the last LED did not reflect the right color
* Adding VIA support for 40percentclub/luddite
* Update config.h
* Update rules.mk
* Delete config.h
config.h was created to override the "default" of RGBLED_NUM 8
deleting the file to keep with defaults
* Removing block and comment as suggested
* Update PRODUCT_ID
Changing from:
#define PRODUCT_ID 0x0A0C
To:
#define PRODUCT_ID 0x4C55 // "LU"
* Changing Vendor ID
Changing Vendor ID from:
#define VENDOR_ID 0xFEED
To:
#define VENDOR_ID 0x3430 // "40"
* Adding VIA support to cannonkeys/practice60
Adding VIA support to cannonkeys/practice60
* updated VENDOR_ID to match other CannonKeys boards
* changed PRODUCT_ID to be unique
* added additional notes to readme.md
* keymap.c and config.h for VIA support
* Update readme.md
* Update keyboards/cannonkeys/practice60/readme.md
* Update keyboards/cannonkeys/practice60/readme.md
* Update keyboards/cannonkeys/practice60/config.h
* Update rules.mk
* Update keyboards/cannonkeys/practice60/config.h
* Update config.h
* Rebased from Master
Rebased from Master
* Trying to fix problems in my kyria steez
* repeating last commit.....
* repeating last commit on EDIT layer but swapping direction
exit
* moving the reversed desktop moves to the symbol layers on the same hand, for easier activation
* adding mac desktop movement keys to Kyria layout
* Adding readmes to my keymaps
* Removing a png...
* Update keyboards/ergodox_ez/keymaps/rmw/keymap-mac.c removing EPRM case
* Apply suggestions from code review
Great updates to various old-school or outdated ways I was doing things, removing some commented out code, etc.
* Apply suggestions from code review
Additional improvements
* Moving tapdances.cpp to userspace as tapdances.c
* reindenting the Kyria keymap to follow four-spaces convention, turning off oled on my kyria, improving the led handling on the Ergodox.
* updating led stuff on the other two versions of the keymap, removing EPRM key from main keymap
* Apply suggestions from code review
I'm adding these various removals to the config file because it seems that at this time those settings are in harmony with the ergodox_ez defaults.
* Moving encoder functions into their own userspace file
* Apply suggestions from code review
Removing settings that are now defaults, clearing out placeholder custom keycodes (smh)
* updating encoder functions.
* Moving to LAYOUT_stack for all layers, adding end of file newlines, switching to some shorter keycode aliases
* Okay, refactor is well underway.
* refactored! Also improved led handling for ergodox and rgb handling for kyria
* removing mac/windows swappable version because I don't feel like dealing with it when reflashing is so easy.
* moving LAYOUT_stack into kyria.h
* moving the alternate default layer down next to QWERTY
* [Keymap] Add pierrec83's gherkin keymap
Contribute my gherkin keymap upstream as it is semi-stable. It has grown
in symbiosis with my Kyria keymap which is already upstream.
Add a readme
* Remove generated keymap and instructions to generate it as it is done by qmk flash
* Initial fork of Sinc
* Setup keymaps, layouts, and encoders
* Add ANSI configurator layout
* Add ISO layout for configurator
* Add all layout option for configurator
* Fix spacing
* Remove extra line
* Remove unneeded ifdef
* Update readme.md description
* Enable bootmagic lite
* Update USB descriptor
* Add modern led code
* Update default keymap for readability
* Update default keymap readme with layout image
* Add VIA keymap
* Update keyboards/noxary/268_2/keymaps/default/readme.md
Flip order of layout image and title
* Update keyboards/noxary/268_2/keymaps/via/readme.md
Flip order of layout image and title
* Update keyboards/noxary/268_2/readme.md
bullet point keyboard maintainer
* Update keyboards/noxary/268_2/readme.md
Change list style
* Update USB descriptors
* Update default keymap for readability
* Update readme description
* Update rules.mk build options, enable bootmagic and mousekey
* Add commented modern led code
* Add VIA keymap
* Update default keymap readme.md layout image
* Update keyboards/noxary/x268/rules.mk
remove incorrect comment
* Update keyboards/noxary/x268/x268.c
remove commented setPinOutput(B1)
* Update keyboards/noxary/x268/keymaps/default/readme.md
Flip order of layout image and title
* Update keyboards/noxary/x268/keymaps/via/readme.md
Flip order of layout image and title
* Update LED function to led_update_kb()
* New custom 'super alt' keymap for the Drop ALT
* Improvements to 'super alt' keymap based on PR feedback
* Fix flickering LED caps lock bug
* Code cleanup from PR feedback
* Minor keymap layout cleanup
* enable NKRO and keep consistent with bootmagic set to lite
* Update keyboards/1upkeyboards/1up60hse/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added keyboard 5x12 to boardsource folder
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fix incorrect delay when setting WS2812 (and similar) leds
* Add documentation for WS2812_DELAY_MICROSECONDS
* Remove improper cast to uint8_t
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* Remove unneeded cast to uint8_t and correct math
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* microseconds -> µs
Co-authored-by: Ryan <fauxpark@gmail.com>
* Make documentation better match the spec sheet.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Rename macro to match spec sheet
* Further correction to the delay maths for the SPI case.
Co-authored-by: Joel Challis <git@zvecr.com>
* Move ws2812_common.h to the drivers directory
* Revert "Further correction to the delay maths for the SPI case."
This reverts commit e61b56a2cfc7dfec9992a7a3af92afa50e5b8ec0.
* Remove ws2812_setleds_pin(); consolidate ws2812.h
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* initial commit for froggy 106 key mode
* add mode indicator on OLED
* use #pragma once instead of include guard
* remove unusable codes
* remove audio codes, because helix rev.2 has no audio feature
* use set_single_persistent_default_layer
* remove eeprom update check
OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes
* Add S7 Elephant Rev2 Support
* Apply suggestions from code review
I tested the changes on my board as well, thanks for the suggestions!
* Added a default folder in the makefile so that this would no longer be a breaking change
* added bordsource 3x4 macro pad
* added bordsource 3x4 macro pad
* Update keyboards/boardsource/3x4/3x4.h
* Update keyboards/boardsource/3x4/3x4.c
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* added link to readme
* Update keyboards/boardsource/3x4/keymaps/default/keymap.c
* Apply suggestions from code review
* changed the layout to refelect the keyboard
* Update keyboards/boardsource/3x4/info.json
Oh your right my bad. In the future is there an easier way for me to test the info.json and the confiscator before doing my pr?
* Apply suggestions from code review
* got 3x4 building again
* Apply suggestions from code review
* applied requested change on readme
* Update keyboards/boardsource/3x4/readme.md
* Apply suggestions from code review
* add ansi and iso layouts
* fix iso map mistake
* fix mistake again...
* Update keyboards/kbdfans/kbd67/mkii_soldered/keymaps/iso/keymap.c
* rename layout macros to the blocker variants and add ansi_split_bs
* Apply suggestions from code review
* Add Kyria keymap
* clean split hand detection code
* rename "joystick" to "thumbstick"
* thumbstick overhaul
* removed angle correction, seems buggy
* save some memory
* Remove deprecated config option
* Use the correct types for getting host led states
* Fix include path
* Made .h files for encoder and oled code
* Increase speed cap on thumbstick
* Add custom corne keymap
* Clean up rules.mk
* Clean up base layer on keymap.c
* Clean up lower layer on keymap.c
* Clean up raise layer on keymap.c
* Clean up adjust layer in keymap.c
* README cleanup
* replaced "normal" numbers with "keypad" numbers:
KC_P4 replaced by KC_KP_P4
* replaced "normal" keys on Numpad Layer with the "KeyPad" keys
KC_1 replaced by KC_P1 etc.
* Fixing via issues
* Fixing whitespace issues on the keymap
* Fixed the default via layer 1 keymap, was a little weird before
* Removing redundant declarations in via/rules.mk
* preliminary check in, basically a copy from 159's github with a few additions to get it to compile
* update readme
* fixup the LAYOUT macro labels to be more reasonable
* add tkl_ansi LAYOUT macro for community layout support
* clean up rules.mk, add community layout suport, and add in bootloader
* add a tsangan layout macro
* spruce up readme
* add VIA keymap
* add qmk configurator support
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* remove unneeded file
* Update keyboards/projectkb/signature87/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/projectkb/signature87/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Using the wpm feature, I create a responsive OLED animation that changes based on how fast the user types. As written there are three phases (It's bongo cat!) but can easily be reconfigured and replaced with other images.
Multiple byte arrays consume considerable space so choose your usage wisely. When customized, the smaller the byte array used, the better, due to space limitations on most microcontrollers.
I made this with no prior knowledge of C, so I'm looking forward to any and all suggested improvements.
Credit is owed to obosob for laying the foundation for this little script as well to /u/pixelbenny for graciously providing the bongocat artwork I adapted for the animation.
The config.h includes a tweak to the Kyria's LED mapping, so that the order now reflects their physical positions, making animations smoother.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Simon Schuster <SimonSchuster@Simons-MacBook-Pro-2.local>
Co-authored-by: James Incandenza <james@ij.net>
A user in Discord reported that the right bracket and ISO hash keys on
KBD67 rev2 using LAYOUT_65_iso were swapped. When comparing
LAYOUT_65_iso with LAYOUT_65_ansi, the problem with a wrong assignment
of the right bracket key is obvious — that key is K1D in the ANSI layout
macro, but the ISO layout macro had K1E there, and K1D at the position
of the ISO hash key.
Fix the LAYOUT_65_iso macro by swapping those arguments (and also align
the K1D argument for the right bracket key properly).
* Gami Studio Lex60: Configurator Layout support
* correct key sizes on bottom row per lukelex
* add LAYOUT_60_ansi
To test, run `make gami_studio/lex60:default_60_ansi` and flash.
* add 60_ansi keymap
To test, run `make gami_studio/lex60:60_ansi` and flash.
* remove data for 60_ansi layout
* Added Via config for Clueboard 66
* Update keyboards/clueboard/66/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Enabled MouseKeys
This required enabling LINK_TIME_OPTIMIZATION_ENABLE
* Added 4th layer as per tzarc's recommendation on another PR
Co-authored-by: Ryan <fauxpark@gmail.com>
ANAVI Macro Pad 8 is an open source mini mechanical keyboard with
8 keys, backlit, addressable RGB WS2812B LED strip on the back and
mini OLED display. Powered by ATmega 32U4 microcontroller and with
microUSB connector.
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add Via support for Percent Canoe
* Removed unnecessary flags from rules.mk
* Changes as per PR
* Added 2 additional empty layers (for a total of 4)
* Set a unique vendor id for all percent studio boards
* Set a unique product id for the canoe
* Fixed formatting, removed trailing comma
* Fixed PS/PT typo for vendor id
* Removed unnecessary variables
* Removed unnecessary slashes
* Fixed missing layer name
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* pick a sane VID
* add the VIA Keymap
* update copyright notice
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* [Keymap] plattfot - Kyria layout
Keymap for programming, writing in both English and Swedish and
easy navigate a tiling window manager.
See README.md for more info
* Fix letter case on the headline for the readme
As suggested by fauxpark
* Update keyboards/kyria/keymaps/plattfot/keymap.c
Clean up double tap
As suggested by fauxpark
* Update led check for render_status
As suggested by fauxpark
* Update to use get_highest_layer for encoder_update_user
As suggested by fauxpark
* Missing an apostrophe in the header of the README.md
Last minute change.
* Removed explicit initialization for _DEFAULT
As suggested by drashna
* Use smaller image for the README.md
As suggested by noroadsleft
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* Fix crkbd slave matrix print to require debug_matrix
* Remove redundant include
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>