fixed color detection routine in makefile
This commit is contained in:
IBNobody
parent
a3a312f8f4
commit
fdaae7ec88
@ -14,27 +14,71 @@
|
||||
# Frederik Rouleau
|
||||
# Carlos Lamas
|
||||
#
|
||||
|
||||
# Enable vpath seraching for source files only
|
||||
# Without this, output files, could be read from the wrong .build directories
|
||||
VPATH_SRC := $(VPATH)
|
||||
vpath %.c $(VPATH_SRC)
|
||||
vpath %.h $(VPATH_SRC)
|
||||
vpath %.cpp $(VPATH_SRC)
|
||||
vpath %.hpp $(VPATH_SRC)
|
||||
vpath %.S $(VPATH_SRC)
|
||||
VPATH :=
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
|
||||
# Output format. (can be srec, ihex, binary)
|
||||
FORMAT = ihex
|
||||
|
||||
BUILD_DIR = .build
|
||||
|
||||
# Object files directory
|
||||
# To put object files in current directory, use a dot (.), do NOT make
|
||||
# this an empty or blank macro!
|
||||
OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
|
||||
|
||||
|
||||
# Optimization level, can be [0, 1, 2, 3, s].
|
||||
# 0 = turn off optimization. s = optimize for size.
|
||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
||||
OPT = s
|
||||
|
||||
COLOR ?= true
|
||||
|
||||
# Debugging format.
|
||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
||||
# AVR Studio 4.10 requires dwarf-2.
|
||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
||||
DEBUG = dwarf-2
|
||||
|
||||
COLOR?=true
|
||||
|
||||
ifeq ($(COLOR),true)
|
||||
NO_COLOR=\033[0m
|
||||
@ -45,38 +89,30 @@ ifeq ($(COLOR),true)
|
||||
BOLD=\033[1m
|
||||
endif
|
||||
|
||||
AUTOGEN ?= false
|
||||
|
||||
ifneq ($(shell awk --version 2>/dev/null),)
|
||||
AWK=awk
|
||||
else
|
||||
AWK=cat && test
|
||||
endif
|
||||
|
||||
OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
|
||||
ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
|
||||
WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
|
||||
OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)
|
||||
ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)
|
||||
WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)
|
||||
|
||||
ifndef $(SILENT)
|
||||
SILENT = false
|
||||
endif
|
||||
|
||||
TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
|
||||
TAB_LOG = printf "\n$$LOG\n\n" | awk '{ sub(/^/," | "); print }'
|
||||
TAB_LOG_PLAIN = printf "$$LOG\n"
|
||||
AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
|
||||
AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
|
||||
PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && exit 1
|
||||
PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
|
||||
PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && exit 1
|
||||
PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
|
||||
PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
|
||||
AWK_STATUS = awk '{ printf " %-10s\n", $$1; }'
|
||||
AWK_CMD = awk '{ printf "%-69s", $$0; }'
|
||||
PRINT_ERROR = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
|
||||
PRINT_WARNING = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
|
||||
PRINT_ERROR_PLAIN = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false
|
||||
PRINT_WARNING_PLAIN = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
|
||||
PRINT_OK = $(SILENT) || printf "$(OK_STRING)" | $(AWK_STATUS)
|
||||
BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
|
||||
|
||||
# List any extra directories to look for include files here.
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRAINCDIRS += $(subst :, ,$(VPATH_SRC))
|
||||
EXTRAINCDIRS = $(subst :, ,$(VPATH))
|
||||
|
||||
|
||||
# Compiler flag to set the C Standard level.
|
||||
@ -88,14 +124,17 @@ CSTANDARD = -std=gnu99
|
||||
|
||||
|
||||
# Place -D or -U options here for C sources
|
||||
CDEFS = -DF_CPU=$(F_CPU)UL
|
||||
CDEFS += $(OPT_DEFS)
|
||||
|
||||
|
||||
# Place -D or -U options here for ASM sources
|
||||
ADEFS = -DF_CPU=$(F_CPU)
|
||||
ADEFS += $(OPT_DEFS)
|
||||
|
||||
|
||||
# Place -D or -U options here for C++ sources
|
||||
CPPDEFS = -DF_CPU=$(F_CPU)UL
|
||||
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
||||
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
||||
CPPDEFS += $(OPT_DEFS)
|
||||
@ -109,12 +148,20 @@ CPPDEFS += $(OPT_DEFS)
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CFLAGS += -g$(DEBUG)
|
||||
CFLAGS = -g$(DEBUG)
|
||||
CFLAGS += $(CDEFS)
|
||||
CFLAGS += -O$(OPT)
|
||||
CFLAGS += -funsigned-char
|
||||
CFLAGS += -funsigned-bitfields
|
||||
CFLAGS += -ffunction-sections
|
||||
CFLAGS += -fdata-sections
|
||||
CFLAGS += -fno-inline-small-functions
|
||||
CFLAGS += -fpack-struct
|
||||
CFLAGS += -fshort-enums
|
||||
CFLAGS += -fno-strict-aliasing
|
||||
# add color
|
||||
ifeq ($(COLOR),true)
|
||||
ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
|
||||
ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
|
||||
CFLAGS+= -fdiagnostics-color
|
||||
endif
|
||||
endif
|
||||
@ -140,9 +187,16 @@ endif
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CPPFLAGS += -g$(DEBUG)
|
||||
CPPFLAGS = -g$(DEBUG)
|
||||
CPPFLAGS += $(CPPDEFS)
|
||||
CPPFLAGS += -O$(OPT)
|
||||
CPPFLAGS += -funsigned-char
|
||||
CPPFLAGS += -funsigned-bitfields
|
||||
CPPFLAGS += -fpack-struct
|
||||
CPPFLAGS += -fshort-enums
|
||||
CPPFLAGS += -fno-exceptions
|
||||
CPPFLAGS += -ffunction-sections
|
||||
CPPFLAGS += -fdata-sections
|
||||
# to supress "warning: only initialized variables can be placed into program memory area"
|
||||
CPPFLAGS += -w
|
||||
CPPFLAGS += -Wall
|
||||
@ -169,7 +223,7 @@ endif
|
||||
# files -- see avr-libc docs [FIXME: not yet described there]
|
||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
||||
# dump that will be displayed for a given single line of source input.
|
||||
ASFLAGS += $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
|
||||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
|
||||
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
ifdef CONFIG_H
|
||||
ASFLAGS += -include $(CONFIG_H)
|
||||
@ -203,6 +257,28 @@ SCANF_LIB =
|
||||
MATH_LIB = -lm
|
||||
|
||||
|
||||
# List any extra directories to look for libraries here.
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRALIBDIRS =
|
||||
|
||||
|
||||
|
||||
#---------------- External Memory Options ----------------
|
||||
|
||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||
# used for variables (.data/.bss) and heap (malloc()).
|
||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
||||
|
||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||
# only used for heap (malloc()).
|
||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
|
||||
|
||||
EXTMEMOPTS =
|
||||
|
||||
|
||||
|
||||
#---------------- Linker Options ----------------
|
||||
# -Wl,...: tell GCC to pass this to linker.
|
||||
# -Map: create map file
|
||||
@ -211,8 +287,9 @@ MATH_LIB = -lm
|
||||
# Comennt out "--relax" option to avoid a error such:
|
||||
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
|
||||
#
|
||||
LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
|
||||
LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
|
||||
#LDFLAGS += -Wl,--relax
|
||||
LDFLAGS += -Wl,--gc-sections
|
||||
LDFLAGS += $(EXTMEMOPTS)
|
||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
|
||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
||||
@ -220,13 +297,59 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
||||
# You can give EXTRALDFLAGS at 'make' command line.
|
||||
LDFLAGS += $(EXTRALDFLAGS)
|
||||
|
||||
|
||||
|
||||
#---------------- Debugging Options ----------------
|
||||
|
||||
# For simulavr only - target MCU frequency.
|
||||
DEBUG_MFREQ = $(F_CPU)
|
||||
|
||||
# Set the DEBUG_UI to either gdb or insight.
|
||||
# DEBUG_UI = gdb
|
||||
DEBUG_UI = insight
|
||||
|
||||
# Set the debugging back-end to either avarice, simulavr.
|
||||
DEBUG_BACKEND = avarice
|
||||
#DEBUG_BACKEND = simulavr
|
||||
|
||||
# GDB Init Filename.
|
||||
GDBINIT_FILE = __avr_gdbinit
|
||||
|
||||
# When using avarice settings for the JTAG
|
||||
JTAG_DEV = /dev/com1
|
||||
|
||||
# Debugging port used to communicate between GDB / avarice / simulavr.
|
||||
DEBUG_PORT = 4242
|
||||
|
||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
||||
# just set to localhost unless doing some sort of crazy debugging when
|
||||
# avarice is running on a different computer.
|
||||
DEBUG_HOST = localhost
|
||||
|
||||
|
||||
|
||||
#============================================================================
|
||||
|
||||
|
||||
# Define programs and commands.
|
||||
SHELL = sh
|
||||
CC = avr-gcc
|
||||
OBJCOPY = avr-objcopy
|
||||
OBJDUMP = avr-objdump
|
||||
SIZE = avr-size
|
||||
AR = avr-ar rcs
|
||||
NM = avr-nm
|
||||
REMOVE = rm -f
|
||||
REMOVEDIR = rmdir
|
||||
COPY = cp
|
||||
WINSHELL = cmd
|
||||
SECHO = $(SILENT) || echo
|
||||
# Autodecct teensy loader
|
||||
ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
|
||||
TEENSY_LOADER_CLI = teensy-loader-cli
|
||||
else
|
||||
TEENSY_LOADER_CLI = teensy_loader_cli
|
||||
endif
|
||||
|
||||
# Define Messages
|
||||
# English
|
||||
@ -239,7 +362,6 @@ MSG_COFF = Converting to AVR COFF:
|
||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
||||
MSG_FLASH = Creating load file for Flash:
|
||||
MSG_EEPROM = Creating load file for EEPROM:
|
||||
MSG_BIN = Creating binary load file for Flash:
|
||||
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
||||
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
||||
MSG_LINKING = Linking:
|
||||
@ -248,24 +370,12 @@ MSG_COMPILING_CPP = Compiling:
|
||||
MSG_ASSEMBLING = Assembling:
|
||||
MSG_CLEANING = Cleaning project:
|
||||
MSG_CREATING_LIBRARY = Creating library:
|
||||
MSG_SUBMODULE_DIRTY = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
|
||||
Some git sub-modules are out of date or modified, please consider runnning:$(BOLD)\n\
|
||||
git submodule sync --recursive\n\
|
||||
git submodule update --init --recursive$(NO_COLOR)\n\n\
|
||||
You can ignore this warning if you are not compiling any ChibiOS keyboards,\n\
|
||||
or if you have modified the ChibiOS libraries yourself. \n\n
|
||||
|
||||
|
||||
|
||||
|
||||
# Define all object files.
|
||||
OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC))))
|
||||
# The files in the lib folder are shared between all keymaps, so generate that folder name by removing
|
||||
# the keymap from the name
|
||||
KBOBJDIR=$(subst _$(KEYMAP),,$(OBJDIR))
|
||||
# And fixup the object files to match
|
||||
LIBOBJ = $(foreach v,$(OBJ),$(if $(findstring /lib/,$v),$v))
|
||||
NONLIBOBJ := $(filter-out $(LIBOBJ),$(OBJ))
|
||||
LIBOBJ := $(subst _$(KEYMAP)/,/,$(LIBOBJ))
|
||||
OBJ := $(LIBOBJ) $(NONLIBOBJ)
|
||||
|
||||
# Define all listing files.
|
||||
LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC))))
|
||||
@ -273,20 +383,34 @@ LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst
|
||||
|
||||
# Compiler flags to generate dependency files.
|
||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
|
||||
GENDEPFLAGS = -MMD -MP -MF $(patsubst %.o,%.td,$@)
|
||||
GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d
|
||||
|
||||
|
||||
# Combine all necessary flags and optional flags.
|
||||
# Add target processor to flags.
|
||||
# You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
|
||||
ALL_CFLAGS = $(MCUFLAGS) $(CFLAGS) $(EXTRAFLAGS)
|
||||
ALL_CPPFLAGS = $(MCUFLAGS) -x c++ $(CPPFLAGS) $(EXTRAFLAGS)
|
||||
ALL_ASFLAGS = $(MCUFLAGS) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
|
||||
|
||||
MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)
|
||||
ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
||||
ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
||||
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
|
||||
|
||||
# Default target.
|
||||
all: build sizeafter
|
||||
all:
|
||||
@$(MAKE) begin
|
||||
@$(MAKE) gccversion
|
||||
@$(MAKE) sizebefore
|
||||
@$(MAKE) clean_list # force clean each time
|
||||
@$(MAKE) build
|
||||
@$(MAKE) sizeafter
|
||||
@$(MAKE) end
|
||||
|
||||
# Quick make that doesn't clean
|
||||
quick:
|
||||
@$(MAKE) begin
|
||||
@$(MAKE) gccversion
|
||||
@$(MAKE) sizebefore
|
||||
@$(MAKE) build
|
||||
@$(MAKE) sizeafter
|
||||
@$(MAKE) end
|
||||
|
||||
# Change the build target to build a HEX file or a library.
|
||||
build: elf hex
|
||||
@ -302,14 +426,17 @@ sym: $(BUILD_DIR)/$(TARGET).sym
|
||||
LIBNAME=lib$(TARGET).a
|
||||
lib: $(LIBNAME)
|
||||
|
||||
check_submodule:
|
||||
git submodule status --recursive | \
|
||||
while IFS= read -r x; do \
|
||||
case "$$x" in \
|
||||
\ *) ;; \
|
||||
*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
|
||||
esac \
|
||||
done
|
||||
|
||||
|
||||
# Eye candy.
|
||||
# AVR Studio 3.x does not check make's exit code but relies on
|
||||
# the following magic strings to be generated by the compile job.
|
||||
begin:
|
||||
@$(SECHO) $(MSG_BEGIN)
|
||||
|
||||
end:
|
||||
@$(SECHO) $(MSG_END)
|
||||
|
||||
|
||||
# Display size of file.
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
||||
@ -320,31 +447,134 @@ sizebefore:
|
||||
@if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
|
||||
2>/dev/null; $(SECHO); fi
|
||||
|
||||
sizeafter: $(BUILD_DIR)/$(TARGET).hex
|
||||
sizeafter:
|
||||
@if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
|
||||
2>/dev/null; $(SECHO); fi
|
||||
# test file sizes eventually
|
||||
# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
|
||||
# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
|
||||
|
||||
# Display compiler version information.
|
||||
gccversion :
|
||||
@$(SILENT) || $(CC) --version
|
||||
|
||||
|
||||
|
||||
# Program the device.
|
||||
program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
|
||||
$(PROGRAM_CMD)
|
||||
|
||||
teensy: $(BUILD_DIR)/$(TARGET).hex
|
||||
$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
|
||||
|
||||
flip: $(BUILD_DIR)/$(TARGET).hex
|
||||
batchisp -hardware usb -device $(MCU) -operation erase f
|
||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
|
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||
|
||||
dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
|
||||
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
|
||||
dfu-programmer $(MCU) erase --force
|
||||
else
|
||||
dfu-programmer $(MCU) erase
|
||||
endif
|
||||
dfu-programmer $(MCU) erase
|
||||
dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
dfu-no-build:
|
||||
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
|
||||
dfu-programmer $(MCU) erase --force
|
||||
else
|
||||
dfu-programmer $(MCU) erase
|
||||
endif
|
||||
dfu-programmer $(MCU) erase
|
||||
dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
dfu-start:
|
||||
dfu-programmer $(MCU) reset
|
||||
dfu-programmer $(MCU) start
|
||||
|
||||
flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
|
||||
$(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
|
||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
|
||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
|
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||
$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
|
||||
|
||||
dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
|
||||
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
|
||||
dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
|
||||
else
|
||||
dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
|
||||
endif
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
|
||||
# Generate avr-gdb config/init file which does the following:
|
||||
# define the reset signal, load the target file, connect to target, and set
|
||||
# a breakpoint at main().
|
||||
gdb-config:
|
||||
@$(REMOVE) $(GDBINIT_FILE)
|
||||
@echo define reset >> $(GDBINIT_FILE)
|
||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
||||
@echo end >> $(GDBINIT_FILE)
|
||||
@echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
|
||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
||||
ifeq ($(DEBUG_BACKEND),simulavr)
|
||||
@echo load >> $(GDBINIT_FILE)
|
||||
endif
|
||||
@echo break main >> $(GDBINIT_FILE)
|
||||
|
||||
debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
|
||||
ifeq ($(DEBUG_BACKEND), avarice)
|
||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
||||
$(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
||||
@$(WINSHELL) /c pause
|
||||
|
||||
else
|
||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
||||
endif
|
||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
||||
|
||||
|
||||
|
||||
|
||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
||||
COFFCONVERT = $(OBJCOPY) --debugging
|
||||
COFFCONVERT += --change-section-address .data-0x800000
|
||||
COFFCONVERT += --change-section-address .bss-0x800000
|
||||
COFFCONVERT += --change-section-address .noinit-0x800000
|
||||
COFFCONVERT += --change-section-address .eeprom-0x810000
|
||||
|
||||
|
||||
|
||||
coff: $(BUILD_DIR)/$(TARGET).elf
|
||||
@$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
|
||||
|
||||
|
||||
extcoff: $(BUILD_DIR)/$(TARGET).elf
|
||||
@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
|
||||
|
||||
|
||||
|
||||
# Create final output files (.hex, .eep) from ELF output file.
|
||||
%.hex: %.elf
|
||||
@$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
|
||||
$(eval CMD=$(HEX) $< $@)
|
||||
$(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@)
|
||||
@$(BUILD_CMD)
|
||||
@$(COPY) $@ $(TARGET).hex
|
||||
$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/compiled.hex" | $(AWK_CMD)
|
||||
$(eval CMD=$(COPY) $@ $(KEYMAP_PATH)/compiled.hex)
|
||||
@$(BUILD_CMD)
|
||||
@if $(AUTOGEN); then \
|
||||
$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(KEYBOARD)_$(KEYMAP).hex\n"; \
|
||||
$(COPY) $@ $(KEYMAP_PATH)/$(KEYBOARD)_$(KEYMAP).hex; \
|
||||
else \
|
||||
$(COPY) $@ $(TARGET).hex; \
|
||||
fi
|
||||
|
||||
%.eep: %.elf
|
||||
@$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
|
||||
$(eval CMD=$(EEP) $< $@ || exit 0)
|
||||
$(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0)
|
||||
@$(BUILD_CMD)
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
@ -359,11 +589,6 @@ gccversion :
|
||||
$(eval CMD=$(NM) -n $< > $@ )
|
||||
@$(BUILD_CMD)
|
||||
|
||||
%.bin: %.elf
|
||||
@$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
|
||||
$(eval CMD=$(BIN) $< $@ || exit 0)
|
||||
@$(BUILD_CMD)
|
||||
|
||||
# Create library from object files.
|
||||
.SECONDARY : $(BUILD_DIR)/$(TARGET).a
|
||||
.PRECIOUS : $(OBJ)
|
||||
@ -372,164 +597,101 @@ gccversion :
|
||||
$(eval CMD=$(AR) $@ $(OBJ) )
|
||||
@$(BUILD_CMD)
|
||||
|
||||
BEGIN = gccversion check_submodule sizebefore
|
||||
|
||||
# Link: create ELF output file from object files.
|
||||
.SECONDARY : $(BUILD_DIR)/$(TARGET).elf
|
||||
.PRECIOUS : $(OBJ)
|
||||
# Note the obj.txt depeendency is there to force linking if a source file is deleted
|
||||
%.elf: $(OBJ) $(OBJDIR)/cflags.txt $(OBJDIR)/ldflags.txt $(OBJDIR)/obj.txt | $(BEGIN)
|
||||
%.elf: $(OBJ)
|
||||
@$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
|
||||
$(eval CMD=$(CC) $(ALL_CFLAGS) $(filter-out %.txt,$^) --output $@ $(LDFLAGS))
|
||||
$(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
|
||||
@$(BUILD_CMD)
|
||||
|
||||
define GEN_OBJRULE
|
||||
# Compile: create object files from C source files.
|
||||
$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt | $(BEGIN)
|
||||
@mkdir -p $$(@D)
|
||||
@$$(SILENT) || printf "$$(MSG_COMPILING) $$<" | $$(AWK_CMD)
|
||||
$$(eval CMD=$$(CC) -c $$(ALL_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
|
||||
@$$(BUILD_CMD)
|
||||
$(OBJDIR)/%.o : %.c
|
||||
@mkdir -p $(@D)
|
||||
@$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
|
||||
$(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
|
||||
@$(BUILD_CMD)
|
||||
|
||||
# Compile: create object files from C++ source files.
|
||||
$1/%.o : %.cpp $1/%.d $1/cppflags.txt $1/compiler.txt | $(BEGIN)
|
||||
@mkdir -p $$(@D)
|
||||
@$$(SILENT) || printf "$$(MSG_COMPILING_CPP) $$<" | $$(AWK_CMD)
|
||||
$$(eval CMD=$$(CC) -c $$(ALL_CPPFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
|
||||
$(OBJDIR)/%.o : %.cpp
|
||||
@mkdir -p $(@D)
|
||||
@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
|
||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
||||
@$(BUILD_CMD)
|
||||
|
||||
# Assemble: create object files from assembler source files.
|
||||
$1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN)
|
||||
@mkdir -p $$(@D)
|
||||
@$(SILENT) || printf "$$(MSG_ASSEMBLING) $$<" | $$(AWK_CMD)
|
||||
$$(eval CMD=$$(CC) -c $$(ALL_ASFLAGS) $$< -o $$@)
|
||||
@$$(BUILD_CMD)
|
||||
|
||||
$1/force:
|
||||
|
||||
$1/cflags.txt: $1/force
|
||||
echo '$$(ALL_CFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CFLAGS)' > $$@
|
||||
|
||||
$1/cppflags.txt: $1/force
|
||||
echo '$$(ALL_CPPFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CPPFLAGS)' > $$@
|
||||
|
||||
$1/asflags.txt: $1/force
|
||||
echo '$$(ALL_ASFLAGS)' | cmp -s - $$@ || echo '$$(ALL_ASFLAGS)' > $$@
|
||||
|
||||
$1/ldflags.txt: $1/force
|
||||
echo '$$(LDFLAGS)' | cmp -s - $$@ || echo '$$(LDFLAGS)' > $$@
|
||||
|
||||
$1/obj.txt: $1/force
|
||||
echo '$$(OBJ)' | cmp -s - $$@ || echo '$$(OBJ)' > $$@
|
||||
|
||||
$1/compiler.txt: $1/force
|
||||
$$(CC) --version | cmp -s - $$@ || $$(CC) --version > $$@
|
||||
endef
|
||||
|
||||
# We have to use static rules for the .d files for some reason
|
||||
DEPS = $(patsubst %.o,%.d,$(OBJ))
|
||||
# Keep the .d files
|
||||
.PRECIOUS: $(DEPS)
|
||||
# Empty rule to force recompilation if the .d file is missing
|
||||
$(DEPS):
|
||||
|
||||
# Since the object files could be in two different folders, generate
|
||||
# separate rules for them, rather than having too generic rules
|
||||
$(eval $(call GEN_OBJRULE,$(OBJDIR)))
|
||||
$(eval $(call GEN_OBJRULE,$(KBOBJDIR)))
|
||||
|
||||
# Compile: create assembler files from C source files.
|
||||
%.s : %.c | $(BEGIN)
|
||||
%.s : %.c
|
||||
@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
|
||||
$(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
|
||||
@$(BUILD_CMD)
|
||||
|
||||
# Compile: create assembler files from C++ source files.
|
||||
%.s : %.cpp | $(BEGIN)
|
||||
%.s : %.cpp
|
||||
@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
|
||||
$(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
|
||||
@$(BUILD_CMD)
|
||||
|
||||
# Assemble: create object files from assembler source files.
|
||||
$(OBJDIR)/%.o : %.S
|
||||
@mkdir -p $(@D)
|
||||
@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
|
||||
$(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
|
||||
@$(BUILD_CMD)
|
||||
|
||||
# Create preprocessed source for use in sending a bug report.
|
||||
%.i : %.c | $(BEGIN)
|
||||
%.i : %.c
|
||||
$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
|
||||
|
||||
# Target: clean project.
|
||||
clean:
|
||||
$(REMOVE) -r $(OBJDIR) 2>/dev/null
|
||||
$(REMOVE) -r $(KBOBJDIR) 2>/dev/null
|
||||
$(REMOVE) $(BUILD_DIR)/$(TARGET).*
|
||||
clean: begin clean_list end
|
||||
|
||||
clean_list :
|
||||
$(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)
|
||||
$(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)
|
||||
$(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)
|
||||
|
||||
show_path:
|
||||
@echo VPATH=$(VPATH)
|
||||
@echo SRC=$(SRC)
|
||||
|
||||
SUBDIRS := $(filter-out %/util/ %/doc/ %/keymaps/ %/old_keymap_files/,$(dir $(wildcard $(TOP_DIR)/keyboards/**/*/Makefile)))
|
||||
SUBDIRS := $(SUBDIRS) $(dir $(wildcard $(TOP_DIR)/keyboards/*/.))
|
||||
SUBDIRS := $(sort $(SUBDIRS))
|
||||
# $(error $(SUBDIRS))
|
||||
all-keyboards-defaults-%:
|
||||
SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboard/*/.)))
|
||||
all-keyboards-defaults:
|
||||
@for x in $(SUBDIRS) ; do \
|
||||
printf "Compiling with default: $$x" | $(AWK_CMD); \
|
||||
LOG=$$($(MAKE) -C $$x $(subst all-keyboards-defaults-,,$@) VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
||||
LOG=$$($(MAKE) -C $$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
||||
done
|
||||
|
||||
all-keyboards-defaults: all-keyboards-defaults-all
|
||||
|
||||
KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboards/%/=/keyboards/%)
|
||||
all-keyboards-all: $(addsuffix -all,$(KEYBOARDS))
|
||||
all-keyboards-clean: $(addsuffix -clean,$(KEYBOARDS))
|
||||
all-keyboards: all-keyboards-all
|
||||
|
||||
define make_keyboard
|
||||
$(eval KEYBOARD=$(patsubst /keyboards/%,%,$1))
|
||||
$(eval SUBPROJECT=$(lastword $(subst /, ,$(KEYBOARD))))
|
||||
$(eval KEYBOARD=$(firstword $(subst /, ,$(KEYBOARD))))
|
||||
$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
|
||||
$(eval KEYMAPS+=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/*/.))))
|
||||
@for x in $(KEYMAPS) ; do \
|
||||
printf "Compiling $(BOLD)$(KEYBOARD)/$(SUBPROJECT)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
|
||||
LOG=$$($(MAKE) -C $(TOP_DIR)$1 $2 keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
||||
done
|
||||
endef
|
||||
|
||||
define make_keyboard_helper
|
||||
# Just remove the -all and so on from the first argument and pass it forward
|
||||
$(call make_keyboard,$(subst -$2,,$1),$2)
|
||||
endef
|
||||
|
||||
/keyboards/%-all:
|
||||
$(call make_keyboard_helper,$@,all)
|
||||
/keyboards/%-clean:
|
||||
$(call make_keyboard_helper,$@,clean)
|
||||
/keyboards/%:
|
||||
$(call make_keyboard_helper,$@,all)
|
||||
|
||||
all-keymaps-%:
|
||||
$(eval MAKECONFIG=$(call get_target,all-keymaps,$@))
|
||||
$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
|
||||
KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboard/%/=/keyboard/%)
|
||||
all-keyboards: $(KEYBOARDS)
|
||||
/keyboard/%:
|
||||
$(eval KEYBOARD=$(patsubst /keyboard/%,%,$@))
|
||||
$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$@/keymaps/*/.))))
|
||||
@for x in $(KEYMAPS) ; do \
|
||||
printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
|
||||
LOG=$$($(MAKE) $(subst all-keymaps-,,$@) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
||||
printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
|
||||
LOG=$$($(MAKE) -C $(TOP_DIR)$@ keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
||||
done
|
||||
|
||||
all-keymaps: all-keymaps-all
|
||||
all-keymaps:
|
||||
$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboard/$(KEYBOARD)/keymaps/*/.))))
|
||||
@for x in $(KEYMAPS) ; do \
|
||||
printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
|
||||
LOG=$$($(MAKE) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
|
||||
done
|
||||
|
||||
# Create build directory
|
||||
$(shell mkdir $(BUILD_DIR) 2>/dev/null)
|
||||
|
||||
# Create object files directory
|
||||
$(shell mkdir $(OBJDIR) 2>/dev/null)
|
||||
$(shell mkdir $(KBOBJDIR) 2>/dev/null)
|
||||
|
||||
|
||||
# Include the dependency files.
|
||||
-include $(patsubst %.o,%.d,$(OBJ))
|
||||
-include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
|
||||
|
||||
|
||||
# Listing of phony targets.
|
||||
.PHONY : all finish sizebefore sizeafter gccversion \
|
||||
build elf hex eep lss sym coff extcoff check_submodule \
|
||||
.PHONY : all quick begin finish end sizebefore sizeafter gccversion \
|
||||
build elf hex eep lss sym coff extcoff \
|
||||
clean clean_list debug gdb-config show_path \
|
||||
program teensy dfu flip dfu-ee flip-ee dfu-start \
|
||||
all-keyboards-defaults all-keyboards all-keymaps \
|
||||
all-keyboards-defaults-% all-keyboards-% all-keymaps-%
|
||||
all-keyboards-defaults all-keyboards all-keymaps
|
||||
|
||||
Loading…
Reference in New Issue
Block a user