diff --git a/keyboards/chibios_test/keymaps/default/keymap.c b/keyboards/chibios_test/keymaps/default/keymap.c index 239d70007a..a362e2ccf6 100644 --- a/keyboards/chibios_test/keymaps/default/keymap.c +++ b/keyboards/chibios_test/keymaps/default/keymap.c @@ -18,7 +18,7 @@ along with this program. If not, see . #include "chibios_test.h" const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - {{KC_CAPS}}, // test with KC_CAPS, KC_A, KC_BTLD + {{KC_CAPS}}, // test with KC_CAPS, KC_A, RESET }; const uint16_t fn_actions[] = { diff --git a/keyboards/clueboard/clueboard.c b/keyboards/clueboard/clueboard.c index 13195bda6b..3435202ba1 100644 --- a/keyboards/clueboard/clueboard.c +++ b/keyboards/clueboard/clueboard.c @@ -1,17 +1 @@ #include "clueboard.h" - -void led_init_ports() { - // * Set our LED pins as output - DDRB |= (1<<4); -} - -void led_set_kb(uint8_t usb_led) { - DDRF |= (1<<0); - if (usb_led & (1<event.pressed) { - rgblight_toggle(); - } - - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - #endif } } diff --git a/keyboards/clueboard/keymaps/max/keymap.c b/keyboards/clueboard/keymaps/max/keymap.c index 82c93401db..193809840b 100644 --- a/keyboards/clueboard/keymaps/max/keymap.c +++ b/keyboards/clueboard/keymaps/max/keymap.c @@ -66,78 +66,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `----------------------------------------------------------------------------------' */ [_RS] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(0), F(6), \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(7), \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), F(4), \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, F(1), F(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(3), F(5), F(2)), + MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), }; -enum function_id { - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL, -}; +/*enum function_id { +};*/ const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(RGBLED_TOGGLE), - [1] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { switch (id) { - case RGBLED_TOGGLE: - //led operations - if (record->event.pressed) { - rgblight_toggle(); - } - - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; } } diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard/rev1/config.h index 9bb58f56e8..8c94972324 100644 --- a/keyboards/clueboard/rev1/config.h +++ b/keyboards/clueboard/rev1/config.h @@ -25,9 +25,8 @@ /* Underlight configuration */ -#define ws2812_PORTREG PORTB -#define ws2812_DDRREG DDRB -#define ws2812_pin 2 +#define RGB_DI_PIN B2 +#define RGBLIGHT_TIMER #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev1/rev1.c b/keyboards/clueboard/rev1/rev1.c index 520a869e57..90fc6956c9 100644 --- a/keyboards/clueboard/rev1/rev1.c +++ b/keyboards/clueboard/rev1/rev1.c @@ -1 +1,17 @@ #include "rev1.h" + +void led_init_ports() { + // * Set our LED pins as output + DDRF |= (1<<0); +} + +void led_set_kb(uint8_t usb_led) { + DDRF |= (1<<0); + if (usb_led & (1<. /* Underlight configuration */ - #define ws2812_PORTREG PORTF - #define ws2812_DDRREG DDRF - #define ws2812_pin 6 - #define RGBLED_NUM 4 // Number of LEDs - #define RGBLIGHT_HUE_STEP 10 - #define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_VAL_STEP 17 +#define RGB_DI_PIN F6 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 4 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/cluepad/keymaps/default/keymap.c b/keyboards/cluepad/keymaps/default/keymap.c index 8ba49952f6..66827fe48b 100644 --- a/keyboards/cluepad/keymaps/default/keymap.c +++ b/keyboards/cluepad/keymaps/default/keymap.c @@ -1,7 +1,6 @@ #include "cluepad.h" #include "backlight.h" -#include "rgblight.h" // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -46,77 +45,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * '-------------------' */ [_FL] = KEYMAP( - LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, F(0), \ - KC_TRNS, F(4), KC_TRNS, F(6), \ - F(3), BL_STEP, F(2), \ - KC_TRNS, F(5), KC_TRNS, F(7), \ - F(1), KC_TRNS) + LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, RGB_TOG, \ + KC_TRNS, RGB_SAI, KC_TRNS, RGB_VAI, \ + RGB_HUD, BL_STEP, RGB_HUI, \ + KC_TRNS, RGB_SAD, KC_TRNS, RGB_VAD, \ + RGB_MOD, KC_TRNS) }; -enum function_id { - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL, -}; +/*enum function_id { +};*/ const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(RGBLED_TOGGLE), - [1] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { switch (id) { - case RGBLED_TOGGLE: - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; } } diff --git a/keyboards/gh60/keymaps/robotmaxtron/Makefile b/keyboards/gh60/keymaps/robotmaxtron/Makefile new file mode 100644 index 0000000000..2e69aee298 --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile @@ -0,0 +1,112 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + diff --git a/keyboards/gh60/keymaps/robotmaxtron/WS2812-wiring.jpg b/keyboards/gh60/keymaps/robotmaxtron/WS2812-wiring.jpg new file mode 100644 index 0000000000..4ab8cc31ac Binary files /dev/null and b/keyboards/gh60/keymaps/robotmaxtron/WS2812-wiring.jpg differ diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h new file mode 100644 index 0000000000..8272875ed0 --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -0,0 +1,190 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT GH60 +#define DESCRIPTION t.m.k. keyboard firmware for GH60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +// Rev A +// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } +// Rev B/C + #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * RGB Underglow + * These settings are for the F4 by default: + * + * + * #define ws2812_PORTREG PORTF + * #define ws2812_DDRREG DDRF + * #define ws2812_pin PF4 + * #define RGBLED_NUM 14 // Number of LEDs + * #define RGBLIGHT_HUE_STEP 10 + * #define RGBLIGHT_SAT_STEP 17 + * #define RGBLIGHT_VAL_STEP 17 + * + * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. + * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. + * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c +*/ + +/* Deprecated code below +#define ws2812_PORTREG PORTF +#define ws2812_DDRREG DDRF +#define ws2812_pin PF4 +*/ +#define RGB_DI_PIN F4 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/gh60/keymaps/robotmaxtron/keymap.c b/keyboards/gh60/keymaps/robotmaxtron/keymap.c new file mode 100644 index 0000000000..263eec4e53 --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/keymap.c @@ -0,0 +1,226 @@ +#include "gh60.h" +#include "action_layer.h" + +#define _BL 0 +#define _AL 1 +#define _FL 2 +#define _UL 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * Base layer, pretty standard ANSI layout. + * ,-----------------------------------------------------------. + * |FN12| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Caps/Fn| A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + [_BL] = KEYMAP( + FN12,1,2,3,4,5,6,7,8,9,0,MINS,EQL,BSPC, \ + TAB,Q,W,E,R,T,Y,U,I,O,P,LBRC,RBRC,BSLS, \ + FN2,A,S,D,F,G,H,J,K,L,SCLN,QUOT,NO,ENT, \ + LSFT,NO,Z,X,C,V,B,N,M,COMM,DOT,SLSH,NO,RSFT, \ + LCTL,LGUI,LALT, SPC, NO,RALT,FN0,APP, RCTL), + + /* + * Locking arrow keys to WASD for when you need dedicated arrow keys + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | |Up | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | |Left|Down|Rght| | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [_AL] = KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,UP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + + + /* + * Primary function layer, mostly the same as the traditional Pok3r layout. + * ,-------------------------------------------------------------. + * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | + * |-------------------------------------------------------------| + * | |_AL| | | | |Calc|PgUp|Up|PgDn|Ptscn|Srlck|Pause| | + * |-------------------------------------------------------------| + * | | | | | | |Home|Left|Down|Rght|Ins| | | + * |-------------------------------------------------------------| + * | |_UL| | | | | | | | | | | + * |-------------------------------------------------------------| + * | | | | | | | | | + * `-------------------------------------------------------------' + */ + [_FL] = KEYMAP( + GRAVE,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12, DELETE, \ + TRNS,FN1,TRNS,TRNS,TRNS,TRNS,CALC,PGUP,UP,PGDN,PSCR,SLCK,PAUS,TRNS, \ + TRNS,MUTE,_VOLDOWN,_VOLUP,TRNS,TRNS,HOME,LEFT,DOWN,RGHT,INS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,FN3,TRNS,TRNS,TRNS,TRNS,END,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + + /* + * Locking layer for controlling the underglow. + * + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | |On|Mode| | | | | | | | | | | + * |-----------------------------------------------------------| + * | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [_UL] = KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,FN4,FN5,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,FN6,FN7,FN8,FN9,FN10,FN11,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), +}; + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay + [1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay + [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer + [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay + [4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow + [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode + [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [12] = ACTION_FUNCTION(SHIFT_ESC), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + +// Layer LED indicators +// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster + uint32_t layer = layer_state; + if (layer & (1<<1)) { + gh60_wasd_leds_on(); + } else { + gh60_wasd_leds_off(); + } + + if (layer & (1<<2)) { + gh60_esc_led_on(); + } else { + gh60_esc_led_off(); + } +}; + +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + static uint8_t shift_esc_shift_mask; + // Shift + ESC = ~ + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +}; diff --git a/keyboards/gh60/keymaps/robotmaxtron/readme.md b/keyboards/gh60/keymaps/robotmaxtron/readme.md new file mode 100644 index 0000000000..3e22925008 --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/readme.md @@ -0,0 +1,16 @@ +robotmaxtron's GH60 Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* Standard ANSI layout with Pok3r styled function layers +* ESC key led enables when on function layer +* Lockable layer with arrow keys on WASD with backlighting to indicate locked on arrow layer +* Neopixel/WS2812 RGB Underglow Support + +## Reference Images +![Wiring Refererence] (WS2812-wiring.jpg) + +### Additional Credits +Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards. diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile index 53eece3969..6fe973e1eb 100644 --- a/keyboards/hhkb/Makefile +++ b/keyboards/hhkb/Makefile @@ -78,6 +78,10 @@ ifndef QUANTUM_DIR include ../../Makefile endif +ifneq (, $(findstring yes, $(HHKB_JP))) + OPT_DEFS += -DHHKB_JP +endif + debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION debug-on: all diff --git a/keyboards/hhkb/config.h b/keyboards/hhkb/config.h index ee66e44571..3f0528b4b9 100644 --- a/keyboards/hhkb/config.h +++ b/keyboards/hhkb/config.h @@ -29,7 +29,11 @@ along with this program. If not, see . #define DESCRIPTION q.m.k keyboard firmware for HHKB /* key matrix size */ -#define MATRIX_ROWS 8 +#ifdef HHKB_JP +# define MATRIX_ROWS 16 +#else +# define MATRIX_ROWS 8 +#endif #define MATRIX_COLS 8 #define TAPPING_TERM 200 diff --git a/keyboards/hhkb/hhkb.h b/keyboards/hhkb/hhkb.h index cc756c4565..e95125efcb 100644 --- a/keyboards/hhkb/hhkb.h +++ b/keyboards/hhkb/hhkb.h @@ -21,4 +21,31 @@ { K70, K71, K72, K73, K74, K75, K76, KC_NO } \ } + +#define KEYMAP_JP( \ + K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \ + K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \ + K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \ + K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \ + K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4) \ +{ \ + { KC_NO, KC_NO, K02, K03, K04, K05, K06, KC_NO }, \ + { KC_NO, KC_NO, K12, K13, K14, K15, K16, KC_NO }, \ + { KC_NO, KC_NO, K22, K23, K24, K25, K26, KC_NO }, \ + { KC_NO, KC_NO, K32, KC_NO, K34, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, K52, K53, KC_NO, K55, K56, KC_NO }, \ + { KC_NO, KC_NO, K62, K63, K64, K65, K66, KC_NO }, \ + { KC_NO, KC_NO, K72, K73, K74, K75, K76, KC_NO }, \ + { KC_NO, KC_NO, K82, K83, K84, K85, K86, KC_NO }, \ + { KC_NO, KC_NO, K92, K93, K94, K95, K96, KC_NO }, \ + { KC_NO, KC_NO, KA2, KA3, KC_NO, KA5, KA6, KC_NO }, \ + { KC_NO, KC_NO, KB2, KB3, KB4, KB5, KB6, KC_NO }, \ + { KC_NO, KC_NO, KC2, KC_NO, KC4, KC5, KC6, KC_NO }, \ + { KC_NO, KC_NO, KD2, KD3, KD4, KD5, KD6, KC_NO }, \ + { KC_NO, KC_NO, KE2, KE3, KE4, KE5, KE6, KC_NO }, \ + { KC_NO, KC_NO, KF2, KF3, KF4, KF5, KF6, KC_NO } \ +} + + #endif diff --git a/keyboards/hhkb/keymaps/jp/Makefile b/keyboards/hhkb/keymaps/jp/Makefile new file mode 100644 index 0000000000..92986292a2 --- /dev/null +++ b/keyboards/hhkb/keymaps/jp/Makefile @@ -0,0 +1 @@ +HHKB_JP=yes diff --git a/keyboards/hhkb/keymaps/jp/keymap.c b/keyboards/hhkb/keymaps/jp/keymap.c new file mode 100644 index 0000000000..8525adce59 --- /dev/null +++ b/keyboards/hhkb/keymaps/jp/keymap.c @@ -0,0 +1,58 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + + +/* Layer 0: HHKB JP + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | + * |------------------------------------------------------` Ent| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | + * |-----------------------------------------------------------| + * |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| + * |-----------------------------------------------------------| + * | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| + * `-----------------------------------------------------------' + */ + +/* Layer 1: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------. + * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | | | + * |------------------------------------------------------` | + * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | + * |-----------------------------------------------------------| + * | | | | | | | +| -|End|PgD|Dow| | | | + * |-----------------------------------------------------------| + * | || | | | | | | | | || | | | + * `-----------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, + MO(1), KC_ZKHK, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_HENK, KC_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = KEYMAP_JP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/hhkb/keymaps/rdg_jp/Makefile b/keyboards/hhkb/keymaps/rdg_jp/Makefile new file mode 100644 index 0000000000..92986292a2 --- /dev/null +++ b/keyboards/hhkb/keymaps/rdg_jp/Makefile @@ -0,0 +1 @@ +HHKB_JP=yes diff --git a/keyboards/hhkb/keymaps/rdg_jp/keymap.c b/keyboards/hhkb/keymaps/rdg_jp/keymap.c new file mode 100644 index 0000000000..700ba3a0b7 --- /dev/null +++ b/keyboards/hhkb/keymaps/rdg_jp/keymap.c @@ -0,0 +1,65 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + +enum { + ZER, + HDN, + OSY +}; + + +#define CTL_ESC CTL_T(KC_ESC) +#define SFT_BSP SFT_T(KC_BSPC) + +#define SCRNS3 LGUI(LCTL(LSFT(KC_3))) +#define SCRNS4 LGUI(LCTL(LSFT(KC_4))) + + +/* hhkb jp ~ layout + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | + * |------------------------------------------------------` Ent| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | + * |-----------------------------------------------------------| + * |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| + * |-----------------------------------------------------------| + * | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| + * `-----------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [ZER] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, + MO(HDN), KC_LCTL, KC_LALT, KC_LGUI, MO(HDN), KC_SPC, SFT_BSP, MO(HDN), MO(OSY), KC_NO, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [HDN] = KEYMAP_JP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, + _______, KC_TILD, KC_GRV, KC_BSLS, KC_PIPE, KC_MINS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TILD, KC_GRV, _______, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, _______, KC_ENT, _______, _______, _______, _______, KC_PGUP, _______, + _______, _______, _______, _______, _______, KC_UNDS , KC_DEL, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [OSY] = KEYMAP_JP( + _______, _______, _______, SCRNS3, SCRNS4, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/infinity_ergodox/keymaps/default/keymap.c b/keyboards/infinity_ergodox/keymaps/default/keymap.c index c33fb7b926..f1e6b1c8ae 100644 --- a/keyboards/infinity_ergodox/keymaps/default/keymap.c +++ b/keyboards/infinity_ergodox/keymaps/default/keymap.c @@ -18,6 +18,9 @@ along with this program. If not, see . #include "infinity_ergodox.h" +// Workaround for old keymap format +#define KC_RESET RESET + const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KEYMAP( // layer 0 : default // left hand @@ -63,7 +66,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KEYMAP( // layer 2 : keyboard functions // left hand - BTLD,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + RESET,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, FN3, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile index 9717b519c8..b00a488b91 100644 --- a/keyboards/kc60/Makefile +++ b/keyboards/kc60/Makefile @@ -53,7 +53,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) diff --git a/keyboards/kc60/keymaps/stanleylai/keymap.c b/keyboards/kc60/keymaps/stanleylai/keymap.c index a7ea6040d5..057c73bf4d 100644 --- a/keyboards/kc60/keymaps/stanleylai/keymap.c +++ b/keyboards/kc60/keymaps/stanleylai/keymap.c @@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_TRNS,KC_NO, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\ + KC_TRNS,KC_NO, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), #else RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ @@ -52,30 +52,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { enum function_id { SHIFT_ESC, - #ifdef RGBLIGHT_ENABLE - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL, - #endif }; const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(SHIFT_ESC), - #ifdef RGBLIGHT_ENABLE - [1] = ACTION_FUNCTION(RGBLED_TOGGLE), - [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - #endif }; #define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) @@ -102,50 +82,5 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } } break; - - #ifdef RGBLIGHT_ENABLE - - case RGBLED_TOGGLE: - //led operations - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - #endif } } diff --git a/keyboards/kc60/keymaps/ws2812/config.h b/keyboards/kc60/keymaps/ws2812/config.h index 933bb0d2d1..2f39ea8e55 100644 --- a/keyboards/kc60/keymaps/ws2812/config.h +++ b/keyboards/kc60/keymaps/ws2812/config.h @@ -1,9 +1,8 @@ #include "../../config.h" /* WS2812B RGB Underglow LED */ -#define ws2812_PORTREG PORTF -#define ws2812_DDRREG DDRF -#define ws2812_pin PF5 // Based on wiring depicted in ws2812_wiring.jpg +#define RGB_DI_PIN F5 // Based on wiring depicted in ws2812_wiring.jpg +#define RGBLIGHT_TIMER #define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/kc60/keymaps/ws2812/keymap.c b/keyboards/kc60/keymaps/ws2812/keymap.c index bd5bef787b..1c0574df09 100644 --- a/keyboards/kc60/keymaps/ws2812/keymap.c +++ b/keyboards/kc60/keymaps/ws2812/keymap.c @@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET), #else KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ @@ -65,30 +65,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { enum function_id { SHIFT_ESC, - #ifdef RGBLIGHT_ENABLE - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL - #endif }; const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(SHIFT_ESC), - #ifdef RGBLIGHT_ENABLE - [1] = ACTION_FUNCTION(RGBLED_TOGGLE), - [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - #endif }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { @@ -114,48 +94,5 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } } break; - //led operations - #ifdef RGBLIGHT_ENABLE - case RGBLED_TOGGLE: - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - #endif } } diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index 6f90997ab4..833818ce60 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -69,9 +69,8 @@ along with this program. If not, see . ) /* ws2812 RGB LED */ -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD -#define ws2812_pin PD1 +#define RGB_DI_PIN D2 +#define RGBLIGHT_TIMER #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h index d5878766f0..983a1d73f2 100644 --- a/keyboards/phantom/config.h +++ b/keyboards/phantom/config.h @@ -62,13 +62,12 @@ along with this program. If not, see . /* Underlight configuration */ - #define ws2812_PORTREG PORTE - #define ws2812_DDRREG DDRE - #define ws2812_pin 2 - #define RGBLED_NUM 20 // Number of LEDs - #define RGBLIGHT_HUE_STEP 10 - #define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_VAL_STEP 17 +#define RGB_DI_PIN E2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 20 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/phantom/keymaps/default/keymap.c b/keyboards/phantom/keymaps/default/keymap.c index 1368226aa9..a4fc319ac8 100644 --- a/keyboards/phantom/keymaps/default/keymap.c +++ b/keyboards/phantom/keymaps/default/keymap.c @@ -1,9 +1,5 @@ #include "phantom.h" -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - // Used for SHIFT_ESC #define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) @@ -59,7 +55,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \ - KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), #else KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ @@ -73,30 +69,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { enum function_id { SHIFT_ESC, - #ifdef RGBLIGHT_ENABLE - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL - #endif }; const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(SHIFT_ESC), - #ifdef RGBLIGHT_ENABLE - [1] = ACTION_FUNCTION(RGBLED_TOGGLE), - [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - #endif }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { @@ -122,48 +98,5 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } } break; - //led operations - #ifdef RGBLIGHT_ENABLE - case RGBLED_TOGGLE: - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - #endif } } diff --git a/keyboards/phantom/led.c b/keyboards/phantom/led.c index b2459c7743..69dba7d40e 100644 --- a/keyboards/phantom/led.c +++ b/keyboards/phantom/led.c @@ -19,7 +19,7 @@ along with this program. If not, see . #include "stdint.h" #include "led.h" -void led_init(void) { +void led_init_ports(void) { // * Set our LED pins as output DDRB |= (1<<6); DDRB |= (1<<7); diff --git a/keyboards/planck/keymaps/experimental/Makefile b/keyboards/planck/keymaps/experimental/Makefile index 581e08cd02..877c4aed0e 100644 --- a/keyboards/planck/keymaps/experimental/Makefile +++ b/keyboards/planck/keymaps/experimental/Makefile @@ -10,12 +10,12 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h index 985e250ab5..52acd1905e 100644 --- a/keyboards/planck/keymaps/experimental/config.h +++ b/keyboards/planck/keymaps/experimental/config.h @@ -6,4 +6,12 @@ #define LEADER_TIMEOUT 300 #define BACKLIGHT_BREATHING + +/* ws2812 RGB LED */ +#define RGB_DI_PIN B1 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + #endif diff --git a/keyboards/planck/keymaps/experimental/keymap.c b/keyboards/planck/keymaps/experimental/keymap.c index 8ec335d7d2..d9303fcae5 100644 --- a/keyboards/planck/keymaps/experimental/keymap.c +++ b/keyboards/planck/keymaps/experimental/keymap.c @@ -15,7 +15,7 @@ extern keymap_config_t keymap_config; // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. -#define _QWERTY 0 +#define _QWERTY 10 #define _COLEMAK 1 #define _DVORAK 2 #define _LOWER 3 @@ -31,7 +31,15 @@ enum planck_keycodes { LOWER, RAISE, BACKLIT, - EXT_PLV + EXT_PLV, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, }; // Fillers to make layering more clear @@ -39,14 +47,20 @@ enum planck_keycodes { #define XXXXXXX KC_NO const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { + {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, + {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, + {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, + {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL} +}, /* Qwerty - * ,-----------------------------------------------------------------------------------. + ,-----------------------------------------------------------------------------------. * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| * | Esc | A | S | D | F | G | H | J | K | L | ; | " | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * | Shift| Z | X | C | V | B | N | M |, | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' @@ -292,6 +306,57 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; return false; + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + return false; + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + return false; + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + return false; + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + return false; + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + return false; + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + return false; + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + return false; + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + return false; + break; + + } return true; }; diff --git a/keyboards/planck/keymaps/pvc/config.h b/keyboards/planck/keymaps/pvc/config.h index b648931081..c857a3e89d 100644 --- a/keyboards/planck/keymaps/pvc/config.h +++ b/keyboards/planck/keymaps/pvc/config.h @@ -60,9 +60,8 @@ along with this program. If not, see . ) /* ws2812 RGB LED */ -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD -#define ws2812_pin PD1 +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/yang/config.h b/keyboards/planck/keymaps/yang/config.h index 5921e9377c..feb5a11901 100644 --- a/keyboards/planck/keymaps/yang/config.h +++ b/keyboards/planck/keymaps/yang/config.h @@ -4,9 +4,8 @@ #include "../../config.h" /* ws2812 RGB LED */ -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD -#define ws2812_pin PD1 +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/yang/keymap.c b/keyboards/planck/keymaps/yang/keymap.c index 541b1a57e4..0ce849050b 100644 --- a/keyboards/planck/keymaps/yang/keymap.c +++ b/keyboards/planck/keymaps/yang/keymap.c @@ -51,33 +51,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RGB] = { /* RGBLIGHT */ {KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL}, {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, KC_TRNS}, - {KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} } }; -enum function_id { - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL, -}; +/*enum function_id { + +};*/ const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_LAYER_TAP_KEY(_RGB, KC_SPC), - [1] = ACTION_FUNCTION(RGBLED_TOGGLE), - [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) @@ -100,47 +85,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { switch (id) { - case RGBLED_TOGGLE: - //led operations - if (record->event.pressed) { - rgblight_toggle(); - } - - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; + } } diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index 04946f7fbb..3fb978c2f6 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -62,9 +62,8 @@ along with this program. If not, see . ) /* ws2812 RGB LED */ -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD -#define ws2812_pin PD1 +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h index a7ea8f904c..7e9f91cc82 100644 --- a/keyboards/satan/config.h +++ b/keyboards/satan/config.h @@ -65,13 +65,13 @@ along with this program. If not, see . /* Underlight configuration */ - #define ws2812_PORTREG PORTE - #define ws2812_DDRREG DDRE - #define ws2812_pin 2 - #define RGBLED_NUM 8 // Number of LEDs - #define RGBLIGHT_HUE_STEP 10 - #define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_VAL_STEP 17 + +#define RGB_DI_PIN E2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options diff --git a/keyboards/satan/keymaps/default/keymap.c b/keyboards/satan/keymaps/default/keymap.c index b19404afc7..35dbbb77b2 100644 --- a/keyboards/satan/keymaps/default/keymap.c +++ b/keyboards/satan/keymaps/default/keymap.c @@ -1,8 +1,5 @@ #include "satan.h" -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif // Used for SHIFT_ESC #define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) @@ -53,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), #else KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ @@ -66,30 +63,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { enum function_id { SHIFT_ESC, - #ifdef RGBLIGHT_ENABLE - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL - #endif }; const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(SHIFT_ESC), - #ifdef RGBLIGHT_ENABLE - [1] = ACTION_FUNCTION(RGBLED_TOGGLE), - [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - #endif }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { @@ -115,48 +92,5 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } } break; - //led operations - #ifdef RGBLIGHT_ENABLE - case RGBLED_TOGGLE: - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - #endif } } diff --git a/keyboards/satan/keymaps/poker/keymap.c b/keyboards/satan/keymaps/poker/keymap.c new file mode 100644 index 0000000000..8181955cf9 --- /dev/null +++ b/keyboards/satan/keymaps/poker/keymap.c @@ -0,0 +1,116 @@ +#include "satan.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(_RL), MO(_FL), KC_RCTL), + +/* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | ~ | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | + * |-----------------------------------------------------------| + * | | Up| | | | |Cal| |Ins| |PrSc|Sclk|Paus| | + * |-----------------------------------------------------------| + * | |Left|Down|Rig| | | | | | |Home|PgUp| | + * |-----------------------------------------------------------| + * | | |App| | | |Vdn|Vup|Mute|End|PgDn| | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS,KC_TRNS, KC_UP, KC_TRNS,KC_TRNS,KC_TRNS, KC_CALC,KC_TRNS,KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \ + KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Keymap _RL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_RL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/sethbc/keymap.c b/keyboards/satan/keymaps/sethbc/keymap.c index 0ea4a7ae4f..f8991f9fd7 100644 --- a/keyboards/satan/keymaps/sethbc/keymap.c +++ b/keyboards/satan/keymaps/sethbc/keymap.c @@ -1,9 +1,5 @@ #include "satan.h" -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - // Used for SHIFT_ESC #define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) @@ -44,39 +40,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), #else KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, RESET, \ - KC_CAPS, KC_TRNS, F(1), F(2), F(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ - KC_TRNS, KC_VOLD, F(4), F(5), F(6), KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ - KC_TRNS, F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_CAPS, KC_TRNS, RGB_TOG,RGB_MOD,RGB_HUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_VOLD, RGB_HUD,RGB_SAI,RGB_SAD, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + KC_TRNS, RGB_VAI,RGB_VAD,KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), #endif }; enum function_id { SHIFT_ESC, - #ifdef RGBLIGHT_ENABLE - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL - #endif }; const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(SHIFT_ESC), - #ifdef RGBLIGHT_ENABLE - [1] = ACTION_FUNCTION(RGBLED_TOGGLE), - [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - #endif }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { @@ -102,48 +78,5 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } } break; - //led operations - #ifdef RGBLIGHT_ENABLE - case RGBLED_TOGGLE: - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - #endif } } diff --git a/keyboards/satan/keymaps/stanleylai/config.h b/keyboards/satan/keymaps/stanleylai/config.h new file mode 100644 index 0000000000..ae2bd36dbb --- /dev/null +++ b/keyboards/satan/keymaps/stanleylai/config.h @@ -0,0 +1,20 @@ +#include "../../config.h" + +// USB Device descriptor parameter +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Custom +#define PRODUCT GH60 rev.CHN +#define DESCRIPTION QMK keyboard firmware for GH60 with WS2812 support + +// Backlight configuration +#define BACKLIGHT_LEVELS 3 + +// Underlight configuration +#define RGB_DI_PIN E2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 6 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/satan/keymaps/stanleylai/keymap.c b/keyboards/satan/keymaps/stanleylai/keymap.c new file mode 100644 index 0000000000..623427e97c --- /dev/null +++ b/keyboards/satan/keymaps/stanleylai/keymap.c @@ -0,0 +1,84 @@ +#include "satan.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RGBL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// See base_layer.png and rgb_layer.png for layout reference + +// Base Default Layer +// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions. +[_BL] = KEYMAP_HHKB( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, MO(_FL), \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), + +// Function layer +[_FL] = KEYMAP_HHKB( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, \ + KC_NO, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LT(_RGBL, KC_PGUP), KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + +// RGB Layer +[_RGBL] = KEYMAP_HHKB( + #ifdef RGBLIGHT_ENABLE + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/quantum/keymap.h b/quantum/keymap.h index 73f99f8211..a158651839 100644 --- a/quantum/keymap.h +++ b/quantum/keymap.h @@ -156,6 +156,16 @@ enum quantum_keycodes { BL_INC, BL_TOGG, BL_STEP, + + // RGB functionality + RGB_TOG, + RGB_MOD, + RGB_HUI, + RGB_HUD, + RGB_SAI, + RGB_SAD, + RGB_VAI, + RGB_VAD, // Left shift, open paren KC_LSPO, diff --git a/quantum/keymap_common.c b/quantum/keymap_common.c index 76872ac592..d0a8312c1e 100644 --- a/quantum/keymap_common.c +++ b/quantum/keymap_common.c @@ -62,7 +62,7 @@ action_t action_for_key(uint8_t layer, keypos_t key) case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE: action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode)); break; - case KC_AUDIO_MUTE ... KC_WWW_FAVORITES: + case KC_AUDIO_MUTE ... KC_MEDIA_REWIND: action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode)); break; case KC_MS_UP ... KC_MS_ACCEL2: diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index f20043067e..401845e855 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -19,12 +19,16 @@ // Setleds for standard RGB void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) { - ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); + // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); + ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF)); } void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask) { - ws2812_DDRREG |= pinmask; // Enable DDR + // ws2812_DDRREG |= pinmask; // Enable DDR + // new universal format (DDR) + _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask; + ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask); _delay_us(50); } @@ -32,14 +36,17 @@ void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pin // Setleds for SK6812RGBW void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) { - ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR - ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(ws2812_pin)); + // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR + // new universal format (DDR) + _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF); + + ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF)); _delay_us(80); } void ws2812_sendarray(uint8_t *data,uint16_t datlen) { - ws2812_sendarray_mask(data,datlen,_BV(ws2812_pin)); + ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF)); } /* @@ -108,8 +115,10 @@ void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi) uint8_t curbyte,ctr,masklo; uint8_t sreg_prev; - masklo =~maskhi&ws2812_PORTREG; - maskhi |= ws2812_PORTREG; + // masklo =~maskhi&ws2812_PORTREG; + // maskhi |= ws2812_PORTREG; + masklo =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2); + maskhi |= _SFR_IO8((RGB_DI_PIN >> 4) + 2); sreg_prev=SREG; cli(); @@ -173,7 +182,7 @@ w_nop16 " dec %0 \n\t" // '1' [+2] '0' [+2] " brne loop%=\n\t" // '1' [+3] '0' [+4] : "=&d" (ctr) - : "r" (curbyte), "I" (_SFR_IO_ADDR(ws2812_PORTREG)), "r" (maskhi), "r" (masklo) + : "r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo) ); } diff --git a/quantum/quantum.c b/quantum/quantum.c index d8e43a4655..d5b9753b76 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -93,16 +93,66 @@ bool process_record_quantum(keyrecord_t *record) { *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific #endif bootloader_jump(); - return false; } + return false; break; case DEBUG: if (record->event.pressed) { print("\nDEBUG: enabled.\n"); debug_enable = true; - return false; } + return false; break; + #ifdef RGBLIGHT_ENABLE + case RGB_TOG: + if (record->event.pressed) { + rgblight_toggle(); + } + return false; + break; + case RGB_MOD: + if (record->event.pressed) { + rgblight_step(); + } + return false; + break; + case RGB_HUI: + if (record->event.pressed) { + rgblight_increase_hue(); + } + return false; + break; + case RGB_HUD: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + return false; + break; + case RGB_SAI: + if (record->event.pressed) { + rgblight_increase_sat(); + } + return false; + break; + case RGB_SAD: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + return false; + break; + case RGB_VAI: + if (record->event.pressed) { + rgblight_increase_val(); + } + return false; + break; + case RGB_VAD: + if (record->event.pressed) { + rgblight_decrease_val(); + } + return false; + break; + #endif case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_UNSWAP_ALT_GUI: if (record->event.pressed) { // MAGIC actions (BOOTMAGIC without the boot) @@ -162,6 +212,12 @@ bool process_record_quantum(keyrecord_t *record) { register_mods(MOD_BIT(KC_LSFT)); } else { + #ifdef DISABLE_SPACE_CADET_ROLLOVER + if (get_mods() & MOD_BIT(KC_RSFT)) { + shift_interrupted[0] = true; + shift_interrupted[1] = true; + } + #endif if (!shift_interrupted[0]) { register_code(LSPO_KEY); unregister_code(LSPO_KEY); @@ -178,6 +234,12 @@ bool process_record_quantum(keyrecord_t *record) { register_mods(MOD_BIT(KC_RSFT)); } else { + #ifdef DISABLE_SPACE_CADET_ROLLOVER + if (get_mods() & MOD_BIT(KC_LSFT)) { + shift_interrupted[0] = true; + shift_interrupted[1] = true; + } + #endif if (!shift_interrupted[1]) { register_code(RSPC_KEY); unregister_code(RSPC_KEY); diff --git a/quantum/rgblight.c b/quantum/rgblight.c index c29ffedc38..b1b0f035d5 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -146,7 +146,9 @@ void rgblight_init(void) { } eeconfig_debug_rgblight(); // display current eeprom values - rgblight_timer_init(); // setup the timer + #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + rgblight_timer_init(); // setup the timer + #endif if (rgblight_config.enable) { rgblight_mode(rgblight_config.mode); @@ -192,14 +194,19 @@ void rgblight_mode(uint8_t mode) { eeconfig_update_rgblight(rgblight_config.raw); xprintf("rgblight mode: %u\n", rgblight_config.mode); if (rgblight_config.mode == 1) { - rgblight_timer_disable(); + #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + rgblight_timer_disable(); + #endif } else if (rgblight_config.mode >=2 && rgblight_config.mode <=23) { // MODE 2-5, breathing // MODE 6-8, rainbow mood // MODE 9-14, rainbow swirl // MODE 15-20, snake // MODE 21-23, knight - rgblight_timer_enable(); + + #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + rgblight_timer_enable(); + #endif } rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); } @@ -211,7 +218,10 @@ void rgblight_toggle(void) { if (rgblight_config.enable) { rgblight_mode(rgblight_config.mode); } else { - rgblight_timer_disable(); + + #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + rgblight_timer_disable(); + #endif _delay_ms(50); rgblight_set(); } @@ -328,6 +338,9 @@ void rgblight_set(void) { } } + +#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + // Animation timer -- AVR Timer3 void rgblight_timer_init(void) { static uint8_t rgblight_timer_is_init = 0; @@ -503,3 +516,5 @@ void rgblight_effect_knight(uint8_t interval) { } } + +#endif \ No newline at end of file diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 64f92523e0..def26c428c 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -1,8 +1,11 @@ #ifndef RGBLIGHT_H #define RGBLIGHT_H -#ifndef RGBLIGHT_MODES -#define RGBLIGHT_MODES 23 + +#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #define RGBLIGHT_MODES 23 +#else + #define RGBLIGHT_MODES 1 #endif #ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH diff --git a/quantum/template/template.c b/quantum/template/template.c index 3057557eae..5ef349583c 100644 --- a/quantum/template/template.c +++ b/quantum/template/template.c @@ -18,7 +18,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { // put your per-action keyboard code here // runs for every action, just before processing by the firmware - return process_record_user(record); + return process_record_user(keycode, record); } void led_set_kb(uint8_t usb_led) { diff --git a/readme.md b/readme.md index c24d951d8d..e0dcd56088 100644 --- a/readme.md +++ b/readme.md @@ -24,9 +24,6 @@ The project also includes community support for [lots of other keyboards](/keybo QMK is developed and maintained by Jack Humbert of OLKB with contributions from the community, and of course, [Hasu](https://github.com/tmk). This repo used to be a fork of [TMK](https://github.com/tmk/tmk_keyboard), and we are incredibly grateful for his founding contributions to the firmware. We've had to break the fork due to purely technical reasons - it simply became too different over time, and we've had to start refactoring some of the basic bits and pieces. We are huge fans of TMK and Hasu :) This documentation is edited and maintained by Erez Zukerman of ErgoDox EZ. If you spot any typos or inaccuracies, please [open an issue](https://github.com/jackhumbert/qmk_firmware/issues/new). -#### 2016/02/10 -core: flabbergast's Chibios protocol was merged from (@72b1668). See [tmk_core/protocol/chibios/README.md](tmk_core/protocol/chibios/README.md). Chibios protocol supports Cortex-M such as STM32 and Kinetis. - The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/jackhumbert), the Ergodox EZ by [Erez Zukerman](https://github.com/ezuk), and the Clueboard by [Zach White](https://github.com/skullydazed). @@ -309,6 +306,12 @@ It's defaulted to work on US keyboards, but if your layout uses different keys f #define LSPO_KEY KC_9 #define RSPC_KEY KC_0 +You can also choose between different rollover behaviors of the shift keys by defining: + + #define DISABLE_SPACE_CADET_ROLLOVER + +in your `config.h`. Disabling rollover allows you to use the opposite shift key to cancel the space cadet state in the event of an erroneous press instead of emitting a pair of parentheses when the keys are released. + The only other thing you're going to want to do is create a `Makefile` in your keymap directory and set the following: ``` @@ -353,6 +356,81 @@ void matrix_scan_user(void) { As you can see, you have three function. you can use - `SEQ_ONE_KEY` for single-key sequences (Leader followed by just one key), and `SEQ_TWO_KEYS` and `SEQ_THREE_KEYS` for longer sequences. Each of these accepts one or more keycodes as arguments. This is an important point: You can use keycodes from **any layer on your keyboard**. That layer would need to be active for the leader macro to fire, obviously. +### Tap Dance: A single key can do 3, 5, or 100 different things + +Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. It's one of the nicest community-contributed features in the firmware, conceived and created by [algernon](https://github.com/algernon) in [#451](https://github.com/jackhumbert/qmk_firmware/pull/451). Here's how Algernon describes the feature: + +With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter. + +To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap. + +With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be send first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly. + +The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time. + +But lets start with how to use it, first! + +First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array. + +This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are two possible options: + +* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. +* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the current state of the tap-dance action. + +The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. + +And that's the bulk of it! + +Do note, however, that this implementation does have some consequences: keys do not register until either they reach the tapping ceiling, or they time out. This means that if you hold the key, nothing happens, no repeat, no nothing. It is possible to detect held state, and register an action then too, but that's not implemented yet. Keys also unregister immediately after being registered, so you can't even hold the second tap. This is intentional, to be consistent. + +And now, on to the explanation of how it works! + +The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer. + +This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness. + +Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys. + +For the sake of flexibility, tap-dance actions can be either a pair of keycodes, or a user function. The latter allows one to handle higher tap counts, or do extra things, like blink the LEDs, fiddle with the backlighting, and so on. This is accomplished by using an union, and some clever macros. + +In the end, let's see a full example! + +```c +enum { + CT_SE = 0, + CT_CLN, + CT_EGG +}; + +/* Have the above three on the keymap, TD(CT_SE), etc... */ + +void dance_cln (qk_tap_dance_state_t *state) { + if (state->count == 1) { + register_code (KC_RSFT); + register_code (KC_SCLN); + unregister_code (KC_SCLN); + unregister_code (KC_RSFT); + } else { + register_code (KC_SCLN); + unregister_code (KC_SCLN); + reset_tap_dance (state); + } +} + +void dance_egg (qk_tap_dance_state_t *state) { + if (state->count >= 100) { + SEND_STRING ("Safety dance!"); + reset_tap_dance (state); + } +} + +const qk_tap_dance_action_t tap_dance_actions[] = { + [CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT) + ,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln) + ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg) +}; +``` + ### Temporarily setting the default layer `DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does. @@ -704,23 +782,18 @@ For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring RGBLIGHT_ENABLE = yes -Please note that the underglow is not compatible with audio output. So you cannot enable both of them at the same time. +In order to use the underglow timer functions, you need to have `#define RGBLIGHT_TIMER` in your `config.h`, and have audio disabled (`AUDIO_ENABLE = no` in your Makefile). -Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the F4 by default: - - #define ws2812_PORTREG PORTF - #define ws2812_DDRREG DDRF - #define ws2812_pin PF4 +Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default: + + #define RGB_DI_PIN F4 // The pin your RGB strip is wired to + #define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 -You'll need to edit `PORTF`, `DDRF`, and `PF4` on the first three lines to the port/pin you have your LED(s) wired to, eg for B3 change things to: - - #define ws2812_PORTREG PORTB - #define ws2812_DDRREG DDRB - #define ws2812_pin PB3 +You'll need to edit `RGB_DI_PIN` to the pin you have your `DI` on your RGB strip wired to. The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. For details, please check this keymap. `keyboards/planck/keymaps/yang/keymap.c` diff --git a/tmk_core/common.mk b/tmk_core/common.mk index 5bae0d762f..aa05b9491d 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -107,7 +107,7 @@ endif # Version string -OPT_DEFS += -DVERSION=$(shell (git describe --always --dirty || echo 'unknown') 2> /dev/null) +OPT_DEFS += -DVERSION=$(GIT_VERSION) # Bootloader address ifdef STM32_BOOTLOADER_ADDRESS diff --git a/tmk_core/common/keycode.h b/tmk_core/common/keycode.h index 448195306f..2f208c54e0 100644 --- a/tmk_core/common/keycode.h +++ b/tmk_core/common/keycode.h @@ -31,7 +31,7 @@ along with this program. If not, see . #define IS_SPECIAL(code) ((0xA5 <= (code) && (code) <= 0xDF) || (0xE8 <= (code) && (code) <= 0xFF)) #define IS_SYSTEM(code) (KC_PWR <= (code) && (code) <= KC_WAKE) -#define IS_CONSUMER(code) (KC_MUTE <= (code) && (code) <= KC_WFAV) +#define IS_CONSUMER(code) (KC_MUTE <= (code) && (code) <= KC_MRWD) #define IS_FN(code) (KC_FN0 <= (code) && (code) <= KC_FN31) #define IS_MOUSEKEY(code) (KC_MS_UP <= (code) && (code) <= KC_MS_ACCEL2) #define IS_MOUSEKEY_MOVE(code) (KC_MS_UP <= (code) && (code) <= KC_MS_RIGHT) @@ -156,8 +156,6 @@ along with this program. If not, see . #define KC_WSTP KC_WWW_STOP #define KC_WREF KC_WWW_REFRESH #define KC_WFAV KC_WWW_FAVORITES -/* Jump to bootloader */ -#define KC_BTLD KC_BOOTLOADER /* Transparent */ #define KC_TRANSPARENT 1 #define KC_TRNS KC_TRANSPARENT @@ -428,9 +426,6 @@ enum internal_special_keycodes { KC_MEDIA_FAST_FORWARD, KC_MEDIA_REWIND, /* 0xBC */ - /* Jump to bootloader */ - KC_BOOTLOADER = 0xBF, - /* Fn key */ KC_FN0 = 0xC0, KC_FN1, diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 352e9314b6..f13351ea19 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -260,7 +260,7 @@ LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst # Compiler flags to generate dependency files. #GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d -GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d +GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$(subst $(BUILD_DIR)/,,$@)).d # Combine all necessary flags and optional flags. @@ -271,23 +271,10 @@ ALL_CPPFLAGS = $(MCUFLAGS) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS) ALL_ASFLAGS = $(MCUFLAGS) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS) # Default target. -all: - @$(MAKE) begin - @$(MAKE) gccversion - @$(MAKE) sizebefore - @$(MAKE) clean_list # force clean each time - @$(MAKE) build - @$(MAKE) sizeafter - @$(MAKE) end +all: build sizeafter # Quick make that doesn't clean -quick: - @$(MAKE) begin - @$(MAKE) gccversion - @$(MAKE) sizebefore - @$(MAKE) build - @$(MAKE) sizeafter - @$(MAKE) end +quick: build sizeafter # Change the build target to build a HEX file or a library. build: elf hex @@ -303,13 +290,7 @@ sym: $(BUILD_DIR)/$(TARGET).sym LIBNAME=lib$(TARGET).a lib: $(LIBNAME) - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @$(SECHO) $(MSG_BEGIN) +check_submodule: git submodule status --recursive | \ while IFS= read -r x; do \ case "$$x" in \ @@ -318,10 +299,6 @@ begin: esac \ done -end: - @$(SECHO) $(MSG_END) - - # Display size of file. HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex #ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf @@ -331,7 +308,7 @@ sizebefore: @if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \ 2>/dev/null; $(SECHO); fi -sizeafter: +sizeafter: $(BUILD_DIR)/$(TARGET).hex @if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \ 2>/dev/null; $(SECHO); fi # test file sizes eventually @@ -383,60 +360,55 @@ gccversion : $(eval CMD=$(AR) $@ $(OBJ) ) @$(BUILD_CMD) +BEGIN = gccversion check_submodule sizebefore + # Link: create ELF output file from object files. .SECONDARY : $(BUILD_DIR)/$(TARGET).elf .PRECIOUS : $(OBJ) -%.elf: $(OBJ) +%.elf: $(OBJ) | $(BEGIN) @$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD) $(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)) @$(BUILD_CMD) # Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c +$(OBJDIR)/%.o : %.c | $(BEGIN) @mkdir -p $(@D) @$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD) $(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@) @$(BUILD_CMD) # Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp +$(OBJDIR)/%.o : %.cpp | $(BEGIN) @mkdir -p $(@D) @$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD) $(eval CMD=$(CC) -c $(ALL_CPPFLAGS) $< -o $@) @$(BUILD_CMD) # Compile: create assembler files from C source files. -%.s : %.c +%.s : %.c | $(BEGIN) @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD) $(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@) @$(BUILD_CMD) # Compile: create assembler files from C++ source files. -%.s : %.cpp +%.s : %.cpp | $(BEGIN) @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD) $(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@) @$(BUILD_CMD) # Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S +$(OBJDIR)/%.o : %.S | $(BEGIN) @mkdir -p $(@D) @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD) $(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@) @$(BUILD_CMD) # Create preprocessed source for use in sending a bug report. -%.i : %.c +%.i : %.c | $(BEGIN) $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ # Target: clean project. -clean: begin clean_list end - -clean_list : - @$(REMOVE) -r $(BUILD_DIR) - @$(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR) - @$(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR) - @if $$SUBPROJECT; then $(REMOVE) -r $(SUBPROJECT_PATH)/$(BUILD_DIR); fi - @$(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR) +clean: show_path: @echo VPATH=$(VPATH) @@ -496,6 +468,19 @@ all-keymaps-%: all-keymaps: all-keymaps-all +GOAL=$(MAKECMDGOALS) +ifeq ($(MAKECMDGOALS),) +GOAL = all +endif +CLEANING_GOALS=clean clean_list all +ifneq ($(findstring $(GOAL),$(CLEANING_GOALS)),) +$(shell $(REMOVE) -r $(BUILD_DIR) 2>/dev/null) +$(shell $(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)) +$(shell $(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)) +$(shell if $$SUBPROJECT; then $(REMOVE) -r $(SUBPROJECT_PATH)/$(BUILD_DIR); fi) +$(shell $(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)) +endif + # Create build directory $(shell mkdir $(BUILD_DIR) 2>/dev/null) @@ -508,8 +493,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all quick begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff \ +.PHONY : all quick finish sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff check_submodule \ clean clean_list debug gdb-config show_path \ program teensy dfu flip dfu-ee flip-ee dfu-start \ all-keyboards-defaults all-keyboards all-keymaps \