2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
This commit is contained in:
James Young
GitHub
33
keyboards/evyd13/atom47/keymaps/LEdiodes/keymap.c
Normal file
33
keyboards/evyd13/atom47/keymaps/LEdiodes/keymap.c
Normal file
@@ -0,0 +1,33 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// These are all aliases for the function layers.
|
||||
#define _L0 0
|
||||
#define _L1 1
|
||||
#define _L2 2
|
||||
#define _L3 3
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_L0] = LAYOUT(
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \
|
||||
|
||||
[_L2] = LAYOUT(
|
||||
_______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
|
||||
|
||||
[_L1] = LAYOUT(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
|
||||
_______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
|
||||
|
||||
[_L3] = LAYOUT(
|
||||
_______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \
|
||||
};
|
||||
64
keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk
Normal file
64
keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk
Normal file
@@ -0,0 +1,64 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
50
keyboards/evyd13/atom47/keymaps/default/keymap.c
Normal file
50
keyboards/evyd13/atom47/keymaps/default/keymap.c
Normal file
@@ -0,0 +1,50 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
|
||||
#define _MA 0 //Main layer
|
||||
#define _FN 1 //Fn
|
||||
#define _FN1 2 //Fn1
|
||||
#define _PN 3 //Pn
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_MA] = LAYOUT(
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \
|
||||
|
||||
[_FN] = LAYOUT(
|
||||
_______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
|
||||
|
||||
[_FN1] = LAYOUT(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
|
||||
_______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
|
||||
|
||||
[_PN] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
|
||||
};
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTE &= ~(1 << 6);
|
||||
|
||||
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTE |= (1 << 6);
|
||||
}
|
||||
}
|
||||
|
||||
1
keyboards/evyd13/atom47/keymaps/default/readme.md
Normal file
1
keyboards/evyd13/atom47/keymaps/default/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
|
||||
68
keyboards/evyd13/atom47/keymaps/evyd13/keymap.c
Normal file
68
keyboards/evyd13/atom47/keymaps/evyd13/keymap.c
Normal file
@@ -0,0 +1,68 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
|
||||
#define _MA 0 //Main layer
|
||||
#define _LO 1 //FN1
|
||||
#define _RA 2 //FN
|
||||
|
||||
enum custom_keycodes {
|
||||
CTRLZ = SAFE_RANGE,
|
||||
CTRLX,
|
||||
CTRLC,
|
||||
CTRLV
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_MA] = LAYOUT(
|
||||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, MO(_LO), KC_SPC, KC_SPC, MO(_RA), KC_RALT, KC_APP, KC_RCTRL), \
|
||||
|
||||
[_LO] = LAYOUT(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
|
||||
_______, CTRLZ, CTRLX, CTRLC, CTRLV, _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), \
|
||||
|
||||
[_RA] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, _______, \
|
||||
KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
|
||||
|
||||
};
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTE &= ~(1 << 6);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTE |= (1 << 6);
|
||||
}
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
switch(keycode) {
|
||||
case CTRLZ:
|
||||
SEND_STRING(SS_LCTRL("z"));
|
||||
return false;
|
||||
case CTRLX:
|
||||
SEND_STRING(SS_LCTRL("x"));
|
||||
return false;
|
||||
case CTRLC:
|
||||
SEND_STRING(SS_LCTRL("c"));
|
||||
return false;
|
||||
case CTRLV:
|
||||
SEND_STRING(SS_LCTRL("v"));
|
||||
return false;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
};
|
||||
1
keyboards/evyd13/atom47/keymaps/evyd13/readme.md
Normal file
1
keyboards/evyd13/atom47/keymaps/evyd13/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
|
||||
150
keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c
Normal file
150
keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c
Normal file
@@ -0,0 +1,150 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
/* enum custom_keycodes {
|
||||
SHIFTEN = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
SPACFNL,
|
||||
SPACFNR,
|
||||
MAIN,
|
||||
ADJUST
|
||||
}; */
|
||||
|
||||
#define _MAIN 0
|
||||
#define _SPLEFT 1
|
||||
#define _SPRIGHT 2
|
||||
#define _LOWER 3
|
||||
#define _RAISE 4
|
||||
#define _ADJUST 5
|
||||
|
||||
#define _DPAD 6
|
||||
#define _DPADNUM 7
|
||||
|
||||
|
||||
#define SHIFTEN RSFT_T(KC_ENT)
|
||||
#define LOWER MO(_LOWER)
|
||||
#define RAISE MO(_RAISE)
|
||||
#define SPACFNL LT(_SPLEFT, KC_SPC)
|
||||
#define SPACFNR LT(_SPRIGHT, KC_SPC)
|
||||
|
||||
#define DP_ON TO(_DPAD)
|
||||
#define DP_OFF TO(_MAIN)
|
||||
#define DPADNUM MO(_DPADNUM)
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
// Primary layer
|
||||
[_MAIN] = LAYOUT(
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC,
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SHIFTEN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, LOWER, SPACFNL, SPACFNR, RAISE, KC_RALT, KC_APP, KC_RCTRL
|
||||
),
|
||||
|
||||
// Main Fn navigation layer
|
||||
[_SPLEFT] = LAYOUT(
|
||||
_______, KC_VOLU, KC_PGUP, KC_UP, KC_PGDN, KC_INS, _______, _______, KC_UP, _______, KC_PSCR, _______, _______,
|
||||
_______, KC_VOLD, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_DEL ,
|
||||
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
// Primary numeric layer using right Spacebar
|
||||
[_SPRIGHT] = LAYOUT(
|
||||
KC_GRV, _______, _______, KC_LBRC, KC_RBRC, _______, _______, KC_7, KC_8, KC_9, KC_0, _______, _______,
|
||||
_______, _______, _______, KC_LCBR, KC_RCBR, _______, _______, KC_4, KC_5, KC_6, KC_MINUS, KC_BSLS,
|
||||
_______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, KC_EQUAL, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
// Secondary symbol layer, also Lower
|
||||
[_LOWER] = LAYOUT(
|
||||
KC_TILD, _______, _______, _______, _______, _______, _______, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_SLCK, KC_PAUS,
|
||||
KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_DLR, KC_PERC, KC_CIRC, KC_UNDS, KC_PIPE,
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_EXLM, KC_AT, KC_HASH, KC_PLUS, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY
|
||||
),
|
||||
|
||||
// Numpad layer // Also a homage to Planck with the media player/pause button
|
||||
[_RAISE] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY
|
||||
),
|
||||
|
||||
// Safety layer for special functions
|
||||
[_ADJUST] = LAYOUT(
|
||||
_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DP_ON,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
[_DPAD] = LAYOUT(
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC,
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, DPADNUM, KC_SPC, DP_OFF, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[_DPADNUM] = LAYOUT(
|
||||
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______,
|
||||
_______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______,
|
||||
_______, _______, _______, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
/* case MAIN:
|
||||
if (record->event.pressed) {
|
||||
persistant_default_layer_set(1UL<<_MAIN);
|
||||
}
|
||||
return false;
|
||||
break; */
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
/* case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
break; */
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
writePinLow(E6);
|
||||
|
||||
|
||||
} else {
|
||||
// Turn capslock off
|
||||
writePinHigh(E6);
|
||||
}
|
||||
}
|
||||
1
keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md
Normal file
1
keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
Juno's junonum keymap adapted for Atom47.
|
||||
26
keyboards/evyd13/atom47/readme.md
Normal file
26
keyboards/evyd13/atom47/readme.md
Normal file
@@ -0,0 +1,26 @@
|
||||
# Atom47
|
||||
|
||||
|
||||
|
||||
## Support
|
||||
Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
|
||||
Hardware Supported: Atom47 rev2/rev3
|
||||
Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)
|
||||
|
||||
|
||||
## Features (rev3 and up)
|
||||
- QMK Firmware
|
||||
- 6 Underglow RGB leds
|
||||
- In-switch leds
|
||||
- Through-hole micro usb connector (less likely to break off!)
|
||||
- South facing leds for the QMX/Zealencio users
|
||||
- Multiple layouts
|
||||
- Easily reachable reset button under the spacebar
|
||||
- CapsLock indicator
|
||||
|
||||
## Build
|
||||
To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`.
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
||||
|
||||
|
||||
68
keyboards/evyd13/atom47/rev2/config.h
Normal file
68
keyboards/evyd13/atom47/rev2/config.h
Normal file
@@ -0,0 +1,68 @@
|
||||
/*
|
||||
Copyright 2012 Evy Dekkers
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef REV2_CONFIG_H
|
||||
#define REV2_CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER Vortex
|
||||
#define PRODUCT Core
|
||||
#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.2
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 13
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
|
||||
#define MATRIX_ROW_PINS {B1,B2,B3,B7}
|
||||
#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* Backlight configuration
|
||||
*/
|
||||
#define BACKLIGHT_LEVELS 4
|
||||
|
||||
#define RGB_DI_PIN D0 // The pin the LED strip is connected to
|
||||
#define RGBLED_NUM 1 // Number of LEDs in your strip
|
||||
|
||||
#define QMK_ESC_OUTPUT D7 // usually COL
|
||||
#define QMK_ESC_INPUT B1 // usually ROW
|
||||
#define QMK_LED B6
|
||||
|
||||
#endif
|
||||
12
keyboards/evyd13/atom47/rev2/info.json
Normal file
12
keyboards/evyd13/atom47/rev2/info.json
Normal file
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"keyboard_name": "Atom47",
|
||||
"url": "",
|
||||
"maintainer": "evyd13",
|
||||
"width": 13,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
|
||||
}
|
||||
}
|
||||
}
|
||||
23
keyboards/evyd13/atom47/rev2/readme.md
Normal file
23
keyboards/evyd13/atom47/rev2/readme.md
Normal file
@@ -0,0 +1,23 @@
|
||||
# Atom47 rev2
|
||||
|
||||
This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
|
||||
|
||||
## Support
|
||||
Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)
|
||||
Hardware Supported: Atom47 rev2
|
||||
Hardware Availability: None
|
||||
|
||||
|
||||
## Features
|
||||
- QMK Firmware
|
||||
- In-switch leds
|
||||
- Through-hole micro usb connector (less likely to break off!)
|
||||
- Easily reachable reset button under the spacebar
|
||||
- In-switch CapsLock indicator
|
||||
|
||||
## Build
|
||||
To build the default keymap, simply run `make atom47/rev2:default`.
|
||||
|
||||
For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
||||
34
keyboards/evyd13/atom47/rev2/rev2.c
Normal file
34
keyboards/evyd13/atom47/rev2/rev2.c
Normal file
@@ -0,0 +1,34 @@
|
||||
#include "rev2.h"
|
||||
#include "led.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
};
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output
|
||||
DDRB &= ~(1<<5);
|
||||
|
||||
//Set output high, so the capslock led is off
|
||||
PORTB |= (1 << 5);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTF |= (1<<5);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTF &= ~(1<<5);
|
||||
}
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
25
keyboards/evyd13/atom47/rev2/rev2.h
Normal file
25
keyboards/evyd13/atom47/rev2/rev2.h
Normal file
@@ -0,0 +1,25 @@
|
||||
#ifndef ATOM47_H
|
||||
#define ATOM47_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// readability
|
||||
#define XXX KC_NO
|
||||
|
||||
#define LAYOUT( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \
|
||||
k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
|
||||
{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \
|
||||
}
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
||||
2
keyboards/evyd13/atom47/rev2/rules.mk
Normal file
2
keyboards/evyd13/atom47/rev2/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality
|
||||
63
keyboards/evyd13/atom47/rev3/config.h
Normal file
63
keyboards/evyd13/atom47/rev3/config.h
Normal file
@@ -0,0 +1,63 @@
|
||||
/*
|
||||
Copyright 2012 Evy Dekkers
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef REV3_CONFIG_H
|
||||
#define REV3_CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER Vortex
|
||||
#define PRODUCT Core
|
||||
#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.3
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 13
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
|
||||
#define MATRIX_ROW_PINS {B3,B2,B1,B0}
|
||||
#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Backlight configuration
|
||||
*/
|
||||
#define BACKLIGHT_LEVELS 4
|
||||
|
||||
#define RGB_DI_PIN F5 // The pin the LED strip is connected to
|
||||
#define RGBLED_NUM 6 // Number of LEDs in your strip
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define QMK_ESC_OUTPUT B7 // usually COL
|
||||
#define QMK_ESC_INPUT B3 // usually ROW
|
||||
#define QMK_LED E6
|
||||
|
||||
#endif
|
||||
12
keyboards/evyd13/atom47/rev3/info.json
Normal file
12
keyboards/evyd13/atom47/rev3/info.json
Normal file
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"keyboard_name": "Atom47",
|
||||
"url": "",
|
||||
"maintainer": "evyd13",
|
||||
"width": 13,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
|
||||
}
|
||||
}
|
||||
}
|
||||
27
keyboards/evyd13/atom47/rev3/rev3.c
Normal file
27
keyboards/evyd13/atom47/rev3/rev3.c
Normal file
@@ -0,0 +1,27 @@
|
||||
#include "rev3.h"
|
||||
#include "led.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
};
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output
|
||||
DDRE |= (1 << 6);
|
||||
|
||||
//Set output high, so the capslock led is off
|
||||
PORTE |= (1 << 6);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
23
keyboards/evyd13/atom47/rev3/rev3.h
Normal file
23
keyboards/evyd13/atom47/rev3/rev3.h
Normal file
@@ -0,0 +1,23 @@
|
||||
#ifndef ATOM47_REV3_H
|
||||
#define ATOM47_REV3_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// readability
|
||||
#define XXX KC_NO
|
||||
|
||||
#define LAYOUT( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
|
||||
k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
|
||||
k30, k31, k32, k33, k35, k37, k39, k3a, k3b, k3c \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
|
||||
{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
|
||||
{k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c} \
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
2
keyboards/evyd13/atom47/rev3/rules.mk
Normal file
2
keyboards/evyd13/atom47/rev3/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality
|
||||
28
keyboards/evyd13/atom47/rules.mk
Normal file
28
keyboards/evyd13/atom47/rules.mk
Normal file
@@ -0,0 +1,28 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
DEFAULT_FOLDER = evyd13/atom47/rev3
|
||||
226
keyboards/evyd13/eon40/config.h
Normal file
226
keyboards/evyd13/eon40/config.h
Normal file
@@ -0,0 +1,226 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0x0140
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Evyd13
|
||||
#define PRODUCT Eon40
|
||||
#define DESCRIPTION A 40% ortholinear PCB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS {B7,D5,F5,F6}
|
||||
#define MATRIX_COL_PINS {F0,F1,F4,D3,D4,D6,D7,B4,B5,B6,C6,C7}
|
||||
#define UNUSED_PINS {B1,B2,B3}
|
||||
|
||||
#define ENCODERS_PAD_A { E6, B0, D1 }
|
||||
#define ENCODERS_PAD_B { F7, D0, D2 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
// #define RGB_DI_PIN E2
|
||||
// #ifdef RGB_DI_PIN
|
||||
// #define RGBLED_NUM 16
|
||||
// #define RGBLIGHT_HUE_STEP 8
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
// #define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
// /*== customize breathing effect ==*/
|
||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
// /*==== use exp() and sin() ====*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
// #endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
||||
#define QMK_ESC_OUTPUT F0 // usually COL
|
||||
#define QMK_ESC_INPUT B7 // usually ROW
|
||||
16
keyboards/evyd13/eon40/eon40.c
Normal file
16
keyboards/evyd13/eon40/eon40.c
Normal file
@@ -0,0 +1,16 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "eon40.h"
|
||||
67
keyboards/evyd13/eon40/eon40.h
Normal file
67
keyboards/evyd13/eon40/eon40.h
Normal file
@@ -0,0 +1,67 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT_ortho_4x12( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
|
||||
}
|
||||
|
||||
#define LAYOUT_planck_mit( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||
k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \
|
||||
}
|
||||
|
||||
#define LAYOUT_ortho_4x12_2x2u( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||
k30, k31, k32, k33, k34, k37, k38, k39, k3a, k3b \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
|
||||
{ k30, k31, k32, k33, k34, XXX, XXX, k37, k38, k39, k3a, k3b } \
|
||||
}
|
||||
18
keyboards/evyd13/eon40/info.json
Normal file
18
keyboards/evyd13/eon40/info.json
Normal file
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"keyboard_name": "Eon40",
|
||||
"url": "https://maartenwut.com/product/eon40/",
|
||||
"maintainer": "qmk",
|
||||
"width": 12,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT_ortho_4x12": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
|
||||
},
|
||||
"LAYOUT_planck_mit": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
|
||||
},
|
||||
"LAYOUT_ortho_4x12_2x2u": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3, "w":2}, {"x":6, "y":3, "w":2}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
|
||||
}
|
||||
}
|
||||
}
|
||||
46
keyboards/evyd13/eon40/keymaps/default/keymap.c
Normal file
46
keyboards/evyd13/eon40/keymaps/default/keymap.c
Normal file
@@ -0,0 +1,46 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
|
||||
#define _MA 0 //Main layer
|
||||
#define _LO 1 //Low
|
||||
#define _HI 2 //High
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_MA] = LAYOUT_ortho_4x12(
|
||||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, MO(_LO), KC_SPC, KC_BSPC, MO(_HI), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT),
|
||||
|
||||
[_LO] = LAYOUT_ortho_4x12(
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
|
||||
_______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
|
||||
|
||||
[_HI] = LAYOUT_ortho_4x12(
|
||||
_______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______,
|
||||
KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
};
|
||||
1
keyboards/evyd13/eon40/keymaps/default/readme.md
Normal file
1
keyboards/evyd13/eon40/keymaps/default/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
This is the default keymap for the Eon40.
|
||||
43
keyboards/evyd13/eon40/keymaps/via/keymap.c
Normal file
43
keyboards/evyd13/eon40/keymaps/via/keymap.c
Normal file
@@ -0,0 +1,43 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_ortho_4x12(
|
||||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, MO(1), KC_SPC, KC_BSPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_MPLY),
|
||||
|
||||
[1] = LAYOUT_ortho_4x12(
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
|
||||
_______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
|
||||
|
||||
[2] = LAYOUT_ortho_4x12(
|
||||
_______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______,
|
||||
KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
[3] = LAYOUT_ortho_4x12(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______)
|
||||
|
||||
};
|
||||
2
keyboards/evyd13/eon40/keymaps/via/rules.mk
Normal file
2
keyboards/evyd13/eon40/keymaps/via/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
||||
21
keyboards/evyd13/eon40/readme.md
Normal file
21
keyboards/evyd13/eon40/readme.md
Normal file
@@ -0,0 +1,21 @@
|
||||
# Eon40
|
||||
|
||||
## Support
|
||||
* Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
|
||||
* Hardware Supported: Eon40
|
||||
* Hardware Availability: [maartenwut.com](https://maartenwut.com)
|
||||
|
||||
|
||||
## Features
|
||||
- QMK Firmware
|
||||
- 19mm switch spacing
|
||||
- USB-C Connector
|
||||
- Up to three rotary encoders
|
||||
- No leds
|
||||
|
||||
## Build
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make evyd13/eon40:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
36
keyboards/evyd13/eon40/rules.mk
Normal file
36
keyboards/evyd13/eon40/rules.mk
Normal file
@@ -0,0 +1,36 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
ENCODER_ENABLE = yes
|
||||
|
||||
LAYOUTS = ortho_4x12 planck_mit
|
||||
LAYOUTS_HAS_RGB = no
|
||||
220
keyboards/evyd13/eon65/config.h
Normal file
220
keyboards/evyd13/eon65/config.h
Normal file
@@ -0,0 +1,220 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0xAEB4
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Evyd13
|
||||
#define PRODUCT Eon65
|
||||
#define DESCRIPTION A 65% PCB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 16
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS {D3,D5,B1,B2,B3}
|
||||
#define MATRIX_COL_PINS {B0,D2,D4,D6,D7,B4,B5,B6,C6,C7,F7,F6,F5,F4,F1,F0}
|
||||
#define UNUSED_PINS {B7,D0,D1}
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define RGB_DI_PIN E6
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 10
|
||||
// #define RGBLIGHT_HUE_STEP 8
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
// /*== customize breathing effect ==*/
|
||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
// /*==== use exp() and sin() ====*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
#endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
16
keyboards/evyd13/eon65/eon65.c
Normal file
16
keyboards/evyd13/eon65/eon65.c
Normal file
@@ -0,0 +1,16 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "eon65.h"
|
||||
103
keyboards/evyd13/eon65/eon65.h
Normal file
103
keyboards/evyd13/eon65/eon65.h
Normal file
@@ -0,0 +1,103 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT_all( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, XXX }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, XXX }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \
|
||||
{ k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e, XXX } \
|
||||
}
|
||||
|
||||
#define LAYOUT_65_ansi( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, XXX }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, XXX }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e, XXX }, \
|
||||
{ k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \
|
||||
{ k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e, XXX } \
|
||||
}
|
||||
|
||||
#define LAYOUT_65_ansi_blocker( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k46, k49, k4a, k4c, k4d, k4e \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, XXX }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, XXX }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e, XXX }, \
|
||||
{ k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \
|
||||
{ k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, XXX, k4c, k4d, k4e, XXX } \
|
||||
}
|
||||
|
||||
#define LAYOUT_65_iso( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, XXX }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e, XXX }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, XXX }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \
|
||||
{ k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e, XXX } \
|
||||
}
|
||||
|
||||
#define LAYOUT_65_iso_blocker( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k46, k49, k4a, k4c, k4d, k4e \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, XXX }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e, XXX }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, XXX }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \
|
||||
{ k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, XXX, k4c, k4d, k4e, XXX } \
|
||||
}
|
||||
392
keyboards/evyd13/eon65/info.json
Normal file
392
keyboards/evyd13/eon65/info.json
Normal file
@@ -0,0 +1,392 @@
|
||||
{
|
||||
"keyboard_name": "Eon65",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 16,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":4, "y":0},
|
||||
{"x":5, "y":0},
|
||||
{"x":6, "y":0},
|
||||
{"x":7, "y":0},
|
||||
{"x":8, "y":0},
|
||||
{"x":9, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0},
|
||||
{"x":14, "y":0},
|
||||
{"x":15, "y":0},
|
||||
|
||||
{"x":0, "y":1, "w":1.5},
|
||||
{"x":1.5, "y":1},
|
||||
{"x":2.5, "y":1},
|
||||
{"x":3.5, "y":1},
|
||||
{"x":4.5, "y":1},
|
||||
{"x":5.5, "y":1},
|
||||
{"x":6.5, "y":1},
|
||||
{"x":7.5, "y":1},
|
||||
{"x":8.5, "y":1},
|
||||
{"x":9.5, "y":1},
|
||||
{"x":10.5, "y":1},
|
||||
{"x":11.5, "y":1},
|
||||
{"x":12.5, "y":1},
|
||||
{"x":13.5, "y":1, "w":1.5},
|
||||
{"x":15, "y":1},
|
||||
|
||||
{"x":0, "y":2, "w":1.75},
|
||||
{"x":1.75, "y":2},
|
||||
{"x":2.75, "y":2},
|
||||
{"x":3.75, "y":2},
|
||||
{"x":4.75, "y":2},
|
||||
{"x":5.75, "y":2},
|
||||
{"x":6.75, "y":2},
|
||||
{"x":7.75, "y":2},
|
||||
{"x":8.75, "y":2},
|
||||
{"x":9.75, "y":2},
|
||||
{"x":10.75, "y":2},
|
||||
{"x":11.75, "y":2},
|
||||
{"x":12.75, "y":2},
|
||||
{"x":13.75, "y":2, "w":1.25},
|
||||
{"x":15, "y":2},
|
||||
|
||||
{"x":0, "y":3, "w":1.25},
|
||||
{"x":1.25, "y":3},
|
||||
{"x":2.25, "y":3},
|
||||
{"x":3.25, "y":3},
|
||||
{"x":4.25, "y":3},
|
||||
{"x":5.25, "y":3},
|
||||
{"x":6.25, "y":3},
|
||||
{"x":7.25, "y":3},
|
||||
{"x":8.25, "y":3},
|
||||
{"x":9.25, "y":3},
|
||||
{"x":10.25, "y":3},
|
||||
{"x":11.25, "y":3},
|
||||
{"x":12.25, "y":3, "w":1.75},
|
||||
{"x":14, "y":3},
|
||||
{"x":15, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.25},
|
||||
{"x":1.25, "y":4, "w":1.25},
|
||||
{"x":2.5, "y":4, "w":1.25},
|
||||
{"x":3.75, "y":4, "w":6.25},
|
||||
{"x":10, "y":4},
|
||||
{"x":11, "y":4},
|
||||
{"x":12, "y":4},
|
||||
{"x":13, "y":4},
|
||||
{"x":14, "y":4},
|
||||
{"x":15, "y":4}
|
||||
]
|
||||
},
|
||||
"LAYOUT_65_ansi": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":4, "y":0},
|
||||
{"x":5, "y":0},
|
||||
{"x":6, "y":0},
|
||||
{"x":7, "y":0},
|
||||
{"x":8, "y":0},
|
||||
{"x":9, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0, "w":2},
|
||||
{"x":15, "y":0},
|
||||
|
||||
{"x":0, "y":1, "w":1.5},
|
||||
{"x":1.5, "y":1},
|
||||
{"x":2.5, "y":1},
|
||||
{"x":3.5, "y":1},
|
||||
{"x":4.5, "y":1},
|
||||
{"x":5.5, "y":1},
|
||||
{"x":6.5, "y":1},
|
||||
{"x":7.5, "y":1},
|
||||
{"x":8.5, "y":1},
|
||||
{"x":9.5, "y":1},
|
||||
{"x":10.5, "y":1},
|
||||
{"x":11.5, "y":1},
|
||||
{"x":12.5, "y":1},
|
||||
{"x":13.5, "y":1, "w":1.5},
|
||||
{"x":15, "y":1},
|
||||
|
||||
{"x":0, "y":2, "w":1.75},
|
||||
{"x":1.75, "y":2},
|
||||
{"x":2.75, "y":2},
|
||||
{"x":3.75, "y":2},
|
||||
{"x":4.75, "y":2},
|
||||
{"x":5.75, "y":2},
|
||||
{"x":6.75, "y":2},
|
||||
{"x":7.75, "y":2},
|
||||
{"x":8.75, "y":2},
|
||||
{"x":9.75, "y":2},
|
||||
{"x":10.75, "y":2},
|
||||
{"x":11.75, "y":2},
|
||||
{"x":12.75, "y":2, "w":2.25},
|
||||
{"x":15, "y":2},
|
||||
|
||||
{"x":0, "y":3, "w":2.25},
|
||||
{"x":2.25, "y":3},
|
||||
{"x":3.25, "y":3},
|
||||
{"x":4.25, "y":3},
|
||||
{"x":5.25, "y":3},
|
||||
{"x":6.25, "y":3},
|
||||
{"x":7.25, "y":3},
|
||||
{"x":8.25, "y":3},
|
||||
{"x":9.25, "y":3},
|
||||
{"x":10.25, "y":3},
|
||||
{"x":11.25, "y":3},
|
||||
{"x":12.25, "y":3, "w":1.75},
|
||||
{"x":14, "y":3},
|
||||
{"x":15, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.25},
|
||||
{"x":1.25, "y":4, "w":1.25},
|
||||
{"x":2.5, "y":4, "w":1.25},
|
||||
{"x":3.75, "y":4, "w":6.25},
|
||||
{"x":10, "y":4},
|
||||
{"x":11, "y":4},
|
||||
{"x":12, "y":4},
|
||||
{"x":13, "y":4},
|
||||
{"x":14, "y":4},
|
||||
{"x":15, "y":4}
|
||||
]
|
||||
},
|
||||
"LAYOUT_65_ansi_blocker": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":4, "y":0},
|
||||
{"x":5, "y":0},
|
||||
{"x":6, "y":0},
|
||||
{"x":7, "y":0},
|
||||
{"x":8, "y":0},
|
||||
{"x":9, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0, "w":2},
|
||||
{"x":15, "y":0},
|
||||
|
||||
{"x":0, "y":1, "w":1.5},
|
||||
{"x":1.5, "y":1},
|
||||
{"x":2.5, "y":1},
|
||||
{"x":3.5, "y":1},
|
||||
{"x":4.5, "y":1},
|
||||
{"x":5.5, "y":1},
|
||||
{"x":6.5, "y":1},
|
||||
{"x":7.5, "y":1},
|
||||
{"x":8.5, "y":1},
|
||||
{"x":9.5, "y":1},
|
||||
{"x":10.5, "y":1},
|
||||
{"x":11.5, "y":1},
|
||||
{"x":12.5, "y":1},
|
||||
{"x":13.5, "y":1, "w":1.5},
|
||||
{"x":15, "y":1},
|
||||
|
||||
{"x":0, "y":2, "w":1.75},
|
||||
{"x":1.75, "y":2},
|
||||
{"x":2.75, "y":2},
|
||||
{"x":3.75, "y":2},
|
||||
{"x":4.75, "y":2},
|
||||
{"x":5.75, "y":2},
|
||||
{"x":6.75, "y":2},
|
||||
{"x":7.75, "y":2},
|
||||
{"x":8.75, "y":2},
|
||||
{"x":9.75, "y":2},
|
||||
{"x":10.75, "y":2},
|
||||
{"x":11.75, "y":2},
|
||||
{"x":12.75, "y":2, "w":2.25},
|
||||
{"x":15, "y":2},
|
||||
|
||||
{"x":0, "y":3, "w":2.25},
|
||||
{"x":2.25, "y":3},
|
||||
{"x":3.25, "y":3},
|
||||
{"x":4.25, "y":3},
|
||||
{"x":5.25, "y":3},
|
||||
{"x":6.25, "y":3},
|
||||
{"x":7.25, "y":3},
|
||||
{"x":8.25, "y":3},
|
||||
{"x":9.25, "y":3},
|
||||
{"x":10.25, "y":3},
|
||||
{"x":11.25, "y":3},
|
||||
{"x":12.25, "y":3, "w":1.75},
|
||||
{"x":14, "y":3},
|
||||
{"x":15, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.25},
|
||||
{"x":1.25, "y":4, "w":1.25},
|
||||
{"x":2.5, "y":4, "w":1.25},
|
||||
{"x":3.75, "y":4, "w":6.25},
|
||||
{"x":10, "y":4, "w":1.25},
|
||||
{"x":11.25, "y":4, "w":1.25},
|
||||
{"x":13, "y":4},
|
||||
{"x":14, "y":4},
|
||||
{"x":15, "y":4}
|
||||
]
|
||||
},
|
||||
"LAYOUT_65_iso": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":4, "y":0},
|
||||
{"x":5, "y":0},
|
||||
{"x":6, "y":0},
|
||||
{"x":7, "y":0},
|
||||
{"x":8, "y":0},
|
||||
{"x":9, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0, "w":2},
|
||||
{"x":15, "y":0},
|
||||
|
||||
{"x":0, "y":1, "w":1.5},
|
||||
{"x":1.5, "y":1},
|
||||
{"x":2.5, "y":1},
|
||||
{"x":3.5, "y":1},
|
||||
{"x":4.5, "y":1},
|
||||
{"x":5.5, "y":1},
|
||||
{"x":6.5, "y":1},
|
||||
{"x":7.5, "y":1},
|
||||
{"x":8.5, "y":1},
|
||||
{"x":9.5, "y":1},
|
||||
{"x":10.5, "y":1},
|
||||
{"x":11.5, "y":1},
|
||||
{"x":12.5, "y":1},
|
||||
{"x":15, "y":1},
|
||||
|
||||
{"x":0, "y":2, "w":1.75},
|
||||
{"x":1.75, "y":2},
|
||||
{"x":2.75, "y":2},
|
||||
{"x":3.75, "y":2},
|
||||
{"x":4.75, "y":2},
|
||||
{"x":5.75, "y":2},
|
||||
{"x":6.75, "y":2},
|
||||
{"x":7.75, "y":2},
|
||||
{"x":8.75, "y":2},
|
||||
{"x":9.75, "y":2},
|
||||
{"x":10.75, "y":2},
|
||||
{"x":11.75, "y":2},
|
||||
{"x":12.75, "y":2},
|
||||
{"x":13.75, "y":1, "w":1.25, "h":2},
|
||||
{"x":15, "y":2},
|
||||
|
||||
{"x":0, "y":3, "w":1.25},
|
||||
{"x":1.25, "y":3},
|
||||
{"x":2.25, "y":3},
|
||||
{"x":3.25, "y":3},
|
||||
{"x":4.25, "y":3},
|
||||
{"x":5.25, "y":3},
|
||||
{"x":6.25, "y":3},
|
||||
{"x":7.25, "y":3},
|
||||
{"x":8.25, "y":3},
|
||||
{"x":9.25, "y":3},
|
||||
{"x":10.25, "y":3},
|
||||
{"x":11.25, "y":3},
|
||||
{"x":12.25, "y":3, "w":1.75},
|
||||
{"x":14, "y":3},
|
||||
{"x":15, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.25},
|
||||
{"x":1.25, "y":4, "w":1.25},
|
||||
{"x":2.5, "y":4, "w":1.25},
|
||||
{"x":3.75, "y":4, "w":6.25},
|
||||
{"x":10, "y":4},
|
||||
{"x":11, "y":4},
|
||||
{"x":12, "y":4},
|
||||
{"x":13, "y":4},
|
||||
{"x":14, "y":4},
|
||||
{"x":15, "y":4}
|
||||
]
|
||||
},
|
||||
"LAYOUT_65_iso_blocker": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":4, "y":0},
|
||||
{"x":5, "y":0},
|
||||
{"x":6, "y":0},
|
||||
{"x":7, "y":0},
|
||||
{"x":8, "y":0},
|
||||
{"x":9, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0, "w":2},
|
||||
{"x":15, "y":0},
|
||||
|
||||
{"x":0, "y":1, "w":1.5},
|
||||
{"x":1.5, "y":1},
|
||||
{"x":2.5, "y":1},
|
||||
{"x":3.5, "y":1},
|
||||
{"x":4.5, "y":1},
|
||||
{"x":5.5, "y":1},
|
||||
{"x":6.5, "y":1},
|
||||
{"x":7.5, "y":1},
|
||||
{"x":8.5, "y":1},
|
||||
{"x":9.5, "y":1},
|
||||
{"x":10.5, "y":1},
|
||||
{"x":11.5, "y":1},
|
||||
{"x":12.5, "y":1},
|
||||
{"x":15, "y":1},
|
||||
|
||||
{"x":0, "y":2, "w":1.75},
|
||||
{"x":1.75, "y":2},
|
||||
{"x":2.75, "y":2},
|
||||
{"x":3.75, "y":2},
|
||||
{"x":4.75, "y":2},
|
||||
{"x":5.75, "y":2},
|
||||
{"x":6.75, "y":2},
|
||||
{"x":7.75, "y":2},
|
||||
{"x":8.75, "y":2},
|
||||
{"x":9.75, "y":2},
|
||||
{"x":10.75, "y":2},
|
||||
{"x":11.75, "y":2},
|
||||
{"x":12.75, "y":2},
|
||||
{"x":13.75, "y":1, "w":1.25, "h":2},
|
||||
{"x":15, "y":2},
|
||||
|
||||
{"x":0, "y":3, "w":1.25},
|
||||
{"x":1.25, "y":3},
|
||||
{"x":2.25, "y":3},
|
||||
{"x":3.25, "y":3},
|
||||
{"x":4.25, "y":3},
|
||||
{"x":5.25, "y":3},
|
||||
{"x":6.25, "y":3},
|
||||
{"x":7.25, "y":3},
|
||||
{"x":8.25, "y":3},
|
||||
{"x":9.25, "y":3},
|
||||
{"x":10.25, "y":3},
|
||||
{"x":11.25, "y":3},
|
||||
{"x":12.25, "y":3, "w":1.75},
|
||||
{"x":14, "y":3},
|
||||
{"x":15, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.25},
|
||||
{"x":1.25, "y":4, "w":1.25},
|
||||
{"x":2.5, "y":4, "w":1.25},
|
||||
{"x":3.75, "y":4, "w":6.25},
|
||||
{"x":10, "y":4, "w":1.25},
|
||||
{"x":11.25, "y":4, "w":1.25},
|
||||
{"x":13, "y":4},
|
||||
{"x":14, "y":4},
|
||||
{"x":15, "y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
32
keyboards/evyd13/eon65/keymaps/default/keymap.c
Normal file
32
keyboards/evyd13/eon65/keymaps/default/keymap.c
Normal file
@@ -0,0 +1,32 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
[1] = LAYOUT_all(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
};
|
||||
46
keyboards/evyd13/eon65/keymaps/mrsendyyk/keymap.c
Normal file
46
keyboards/evyd13/eon65/keymaps/mrsendyyk/keymap.c
Normal file
@@ -0,0 +1,46 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/*
|
||||
* Default Layer [0]
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
|
||||
* │Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │Del│
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
|
||||
* │Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │P U│
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
|
||||
* │Caps L│A │S │D │F │G │H │J │K │L │; │' │Return │P D│
|
||||
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
|
||||
* │Shift │Z │X │C │V │B │N │M │, │. │/ │Shift │↑ │Fn │
|
||||
* ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬┬┬───┼───┼───┤
|
||||
* │Ctrl│Opt │Cmd │ Space │Cmd │Opt │█│← │↓ │→ │
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┴┴┴───┴───┴───┘
|
||||
*/
|
||||
[0] = LAYOUT_65_ansi_blocker(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1),
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
/*
|
||||
* Fn Layer [1]
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
|
||||
* │` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ │ │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
|
||||
* │Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ │
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
|
||||
* │Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ │
|
||||
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
|
||||
* │Vol+ │ │ │Cal│ │ │N L│Ml │ │ │ │Pause │ │ │
|
||||
* ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬┬┬───┼───┼───┤
|
||||
* │Vol-│Rwd │F FD│ Play │Stp │ │█│Prv│ │Nxt│
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┴┴┴───┴───┴───┘
|
||||
*/
|
||||
[1] = LAYOUT_65_ansi_blocker(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||
KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, KC_TRNS,
|
||||
KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS,
|
||||
KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_TRNS, KC_TRNS,
|
||||
KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_NO, KC_MPRV, KC_NO, KC_MNXT
|
||||
)
|
||||
};
|
||||
38
keyboards/evyd13/eon65/keymaps/mrsendyyk/readme.md
Normal file
38
keyboards/evyd13/eon65/keymaps/mrsendyyk/readme.md
Normal file
@@ -0,0 +1,38 @@
|
||||
# [Sendy YK](https://mr.sendyyk.com)'s Keymap
|
||||
`LAYOUT_65_ansi_blocker`
|
||||
|
||||
### Default Layer [0]
|
||||
```
|
||||
┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
|
||||
│Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │Del│
|
||||
├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
|
||||
│Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │P U│
|
||||
├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
|
||||
│Caps L│A │S │D │F │G │H │J │K │L │; │' │Return │P D│
|
||||
├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
|
||||
│Shift │Z │X │C │V │B │N │M │, │. │/ │Shift │↑ │Fn │
|
||||
├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬┬┬───┼───┼───┤
|
||||
│Ctrl│Opt │Cmd │ Space │Cmd │Opt │█│← │↓ │→ │
|
||||
└────┴────┴────┴────────────────────────┴────┴────┴┴┴───┴───┴───┘
|
||||
```
|
||||
|
||||
### Fn Layer [1]
|
||||
```
|
||||
┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
|
||||
│` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ │ │
|
||||
├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
|
||||
│Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ │
|
||||
├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
|
||||
│Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ │
|
||||
├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
|
||||
│Vol+ │ │ │Cal│ │ │N L│Ml │ │ │ │Pause │ │ │
|
||||
├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬┬┬───┼───┼───┤
|
||||
│Vol-│Rwd │F FD│ Play │Stp │ │█│Prv│ │Nxt│
|
||||
└────┴────┴────┴────────────────────────┴────┴────┴┴┴───┴───┴───┘
|
||||
```
|
||||
|
||||
## Build The Firmware
|
||||
You will need to build the firmware. To do so go to your terminal window and run the compile command:
|
||||
|
||||
qmk compile -kb evyd13/eon65 -km mrsendyyk
|
||||
See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs).
|
||||
43
keyboards/evyd13/eon65/keymaps/via/keymap.c
Normal file
43
keyboards/evyd13/eon65/keymaps/via/keymap.c
Normal file
@@ -0,0 +1,43 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
[1] = LAYOUT_all(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
[2] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
[3] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______)
|
||||
};
|
||||
2
keyboards/evyd13/eon65/keymaps/via/rules.mk
Normal file
2
keyboards/evyd13/eon65/keymaps/via/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
||||
13
keyboards/evyd13/eon65/readme.md
Normal file
13
keyboards/evyd13/eon65/readme.md
Normal file
@@ -0,0 +1,13 @@
|
||||
# Eon65
|
||||
|
||||
## Support
|
||||
* Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
|
||||
* Hardware Supported: Eon65
|
||||
* Hardware Availability: None
|
||||
|
||||
## Build
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make evyd13/eon65:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
34
keyboards/evyd13/eon65/rules.mk
Normal file
34
keyboards/evyd13/eon65/rules.mk
Normal file
@@ -0,0 +1,34 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
|
||||
LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker
|
||||
221
keyboards/evyd13/eon75/config.h
Normal file
221
keyboards/evyd13/eon75/config.h
Normal file
@@ -0,0 +1,221 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0x5C62
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Evyd13
|
||||
#define PRODUCT Eon75
|
||||
#define DESCRIPTION A 75% PCB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 12
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS {D1,D0,D3,D2,D6,D4,D7,B4,B5,B6,C6,C7}
|
||||
#define MATRIX_COL_PINS {E6,F0,F1,F4,F5,F6,F7,B3}
|
||||
#define UNUSED_PINS {B2,B1}
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
// #define RGB_DI_PIN D0
|
||||
// #ifdef RGB_DI_PIN
|
||||
// #define RGBLED_NUM 12
|
||||
// #define RGBLIGHT_HUE_STEP 8
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
// #define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
// /*== customize breathing effect ==*/
|
||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
// /*==== use exp() and sin() ====*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
// #endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
||||
45
keyboards/evyd13/eon75/eon75.c
Normal file
45
keyboards/evyd13/eon75/eon75.c
Normal file
@@ -0,0 +1,45 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "eon75.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
};
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output and high
|
||||
setPinOutput(D5);
|
||||
writePinHigh(D5);
|
||||
|
||||
setPinOutput(B7);
|
||||
writePinHigh(B7);
|
||||
|
||||
setPinOutput(B0);
|
||||
writePinHigh(B0);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if(led_update_user(led_state)) {
|
||||
writePin(D5, !led_state.caps_lock);
|
||||
writePin(B7, !led_state.num_lock);
|
||||
writePin(B0, !led_state.scroll_lock);
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
97
keyboards/evyd13/eon75/eon75.h
Normal file
97
keyboards/evyd13/eon75/eon75.h
Normal file
@@ -0,0 +1,97 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT_all( \
|
||||
k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, \
|
||||
k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, \
|
||||
ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \
|
||||
{ k10, k11, XXX, k13, k14, k15, k16, k17 }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37 }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, XXX, k57 }, \
|
||||
{ k60, k61, k62, k63, k64, k65, k66, XXX }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, k77 }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, k87 }, \
|
||||
{ k90, k91, k92, k93, k94, k95, XXX, k97 }, \
|
||||
{ ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7 }, \
|
||||
{ kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_ansi( \
|
||||
k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k27, k37, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k77, \
|
||||
k80, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, \
|
||||
ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \
|
||||
{ k10, k11, XXX, k13, k14, k15, k16, k17 }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \
|
||||
{ k30, k31, k32, k33, k34, k35, XXX, k37 }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, XXX, k57 }, \
|
||||
{ k60, k61, k62, k63, k64, k65, XXX, XXX }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, k77 }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, k87 }, \
|
||||
{ XXX, k91, k92, k93, k94, k95, XXX, k97 }, \
|
||||
{ ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7 }, \
|
||||
{ kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_iso( \
|
||||
k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k27, k37, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k57, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, \
|
||||
k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, \
|
||||
ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \
|
||||
{ k10, k11, XXX, k13, k14, k15, k16, k17 }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \
|
||||
{ k30, k31, k32, k33, k34, k35, XXX, k37 }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, XXX }, \
|
||||
{ k50, k51, k52, k53, k54, k55, XXX, k57 }, \
|
||||
{ k60, k61, k62, k63, k64, k65, k66, XXX }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, k77 }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, k87 }, \
|
||||
{ k90, k91, k92, k93, k94, k95, XXX, k97 }, \
|
||||
{ ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7 }, \
|
||||
{ kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7 } \
|
||||
}
|
||||
289
keyboards/evyd13/eon75/info.json
Normal file
289
keyboards/evyd13/eon75/info.json
Normal file
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"keyboard_name": "Eon75",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 16.5,
|
||||
"height": 6.5,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.5, "y":0},
|
||||
{"x":2.5, "y":0},
|
||||
{"x":3.5, "y":0},
|
||||
{"x":4.5, "y":0},
|
||||
{"x":5.75, "y":0},
|
||||
{"x":6.75, "y":0},
|
||||
{"x":7.75, "y":0},
|
||||
{"x":8.75, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0},
|
||||
{"x":14.5, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
|
||||
{"x":0, "y":1.25},
|
||||
{"x":1, "y":1.25},
|
||||
{"x":2, "y":1.25},
|
||||
{"x":3, "y":1.25},
|
||||
{"x":4, "y":1.25},
|
||||
{"x":5, "y":1.25},
|
||||
{"x":6, "y":1.25},
|
||||
{"x":7, "y":1.25},
|
||||
{"x":8, "y":1.25},
|
||||
{"x":9, "y":1.25},
|
||||
{"x":10, "y":1.25},
|
||||
{"x":11, "y":1.25},
|
||||
{"x":12, "y":1.25},
|
||||
{"x":13, "y":1.25},
|
||||
{"x":14, "y":1.25},
|
||||
{"x":15.5, "y":1.25},
|
||||
|
||||
{"x":0, "y":2.25, "w":1.5},
|
||||
{"x":1.5, "y":2.25},
|
||||
{"x":2.5, "y":2.25},
|
||||
{"x":3.5, "y":2.25},
|
||||
{"x":4.5, "y":2.25},
|
||||
{"x":5.5, "y":2.25},
|
||||
{"x":6.5, "y":2.25},
|
||||
{"x":7.5, "y":2.25},
|
||||
{"x":8.5, "y":2.25},
|
||||
{"x":9.5, "y":2.25},
|
||||
{"x":10.5, "y":2.25},
|
||||
{"x":11.5, "y":2.25},
|
||||
{"x":12.5, "y":2.25},
|
||||
{"x":13.5, "y":2.25, "w":1.5},
|
||||
{"x":15.5, "y":2.25},
|
||||
|
||||
{"x":0, "y":3.25, "w":1.75},
|
||||
{"x":1.75, "y":3.25},
|
||||
{"x":2.75, "y":3.25},
|
||||
{"x":3.75, "y":3.25},
|
||||
{"x":4.75, "y":3.25},
|
||||
{"x":5.75, "y":3.25},
|
||||
{"x":6.75, "y":3.25},
|
||||
{"x":7.75, "y":3.25},
|
||||
{"x":8.75, "y":3.25},
|
||||
{"x":9.75, "y":3.25},
|
||||
{"x":10.75, "y":3.25},
|
||||
{"x":11.75, "y":3.25},
|
||||
{"x":12.75, "y":3.25},
|
||||
{"x":13.75, "y":3.25, "w":1.25},
|
||||
{"x":15.5, "y":3.25},
|
||||
|
||||
{"x":0, "y":4.25, "w":1.25},
|
||||
{"x":1.25, "y":4.25},
|
||||
{"x":2.25, "y":4.25},
|
||||
{"x":3.25, "y":4.25},
|
||||
{"x":4.25, "y":4.25},
|
||||
{"x":5.25, "y":4.25},
|
||||
{"x":6.25, "y":4.25},
|
||||
{"x":7.25, "y":4.25},
|
||||
{"x":8.25, "y":4.25},
|
||||
{"x":9.25, "y":4.25},
|
||||
{"x":10.25, "y":4.25},
|
||||
{"x":11.25, "y":4.25},
|
||||
{"x":12.25, "y":4.25, "w":1.75},
|
||||
{"x":14.25, "y":4.5},
|
||||
{"x":15.5, "y":4.25},
|
||||
|
||||
{"x":0, "y":5.25, "w":1.25},
|
||||
{"x":1.25, "y":5.25, "w":1.25},
|
||||
{"x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"x":10, "y":5.25},
|
||||
{"x":11, "y":5.25},
|
||||
{"x":12, "y":5.25},
|
||||
{"x":13.25, "y":5.5},
|
||||
{"x":14.25, "y":5.5},
|
||||
{"x":15.25, "y":5.5}
|
||||
]
|
||||
},
|
||||
"LAYOUT_ansi": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.5, "y":0},
|
||||
{"x":2.5, "y":0},
|
||||
{"x":3.5, "y":0},
|
||||
{"x":4.5, "y":0},
|
||||
{"x":5.75, "y":0},
|
||||
{"x":6.75, "y":0},
|
||||
{"x":7.75, "y":0},
|
||||
{"x":8.75, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0},
|
||||
{"x":14.5, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
|
||||
{"x":0, "y":1.25},
|
||||
{"x":1, "y":1.25},
|
||||
{"x":2, "y":1.25},
|
||||
{"x":3, "y":1.25},
|
||||
{"x":4, "y":1.25},
|
||||
{"x":5, "y":1.25},
|
||||
{"x":6, "y":1.25},
|
||||
{"x":7, "y":1.25},
|
||||
{"x":8, "y":1.25},
|
||||
{"x":9, "y":1.25},
|
||||
{"x":10, "y":1.25},
|
||||
{"x":11, "y":1.25},
|
||||
{"x":12, "y":1.25},
|
||||
{"x":13, "y":1.25, "w":2},
|
||||
{"x":15.5, "y":1.25},
|
||||
|
||||
{"x":0, "y":2.25, "w":1.5},
|
||||
{"x":1.5, "y":2.25},
|
||||
{"x":2.5, "y":2.25},
|
||||
{"x":3.5, "y":2.25},
|
||||
{"x":4.5, "y":2.25},
|
||||
{"x":5.5, "y":2.25},
|
||||
{"x":6.5, "y":2.25},
|
||||
{"x":7.5, "y":2.25},
|
||||
{"x":8.5, "y":2.25},
|
||||
{"x":9.5, "y":2.25},
|
||||
{"x":10.5, "y":2.25},
|
||||
{"x":11.5, "y":2.25},
|
||||
{"x":12.5, "y":2.25},
|
||||
{"x":13.5, "y":2.25, "w":1.5},
|
||||
{"x":15.5, "y":2.25},
|
||||
|
||||
{"x":0, "y":3.25, "w":1.75},
|
||||
{"x":1.75, "y":3.25},
|
||||
{"x":2.75, "y":3.25},
|
||||
{"x":3.75, "y":3.25},
|
||||
{"x":4.75, "y":3.25},
|
||||
{"x":5.75, "y":3.25},
|
||||
{"x":6.75, "y":3.25},
|
||||
{"x":7.75, "y":3.25},
|
||||
{"x":8.75, "y":3.25},
|
||||
{"x":9.75, "y":3.25},
|
||||
{"x":10.75, "y":3.25},
|
||||
{"x":11.75, "y":3.25},
|
||||
{"x":12.75, "y":3.25, "w":2.25},
|
||||
{"x":15.5, "y":3.25},
|
||||
|
||||
{"x":0, "y":4.25, "w":2.25},
|
||||
{"x":2.25, "y":4.25},
|
||||
{"x":3.25, "y":4.25},
|
||||
{"x":4.25, "y":4.25},
|
||||
{"x":5.25, "y":4.25},
|
||||
{"x":6.25, "y":4.25},
|
||||
{"x":7.25, "y":4.25},
|
||||
{"x":8.25, "y":4.25},
|
||||
{"x":9.25, "y":4.25},
|
||||
{"x":10.25, "y":4.25},
|
||||
{"x":11.25, "y":4.25},
|
||||
{"x":12.25, "y":4.25, "w":1.75},
|
||||
{"x":14.25, "y":4.5},
|
||||
{"x":15.5, "y":4.25},
|
||||
|
||||
{"x":0, "y":5.25, "w":1.25},
|
||||
{"x":1.25, "y":5.25, "w":1.25},
|
||||
{"x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"x":10, "y":5.25},
|
||||
{"x":11, "y":5.25},
|
||||
{"x":12, "y":5.25},
|
||||
{"x":13.25, "y":5.5},
|
||||
{"x":14.25, "y":5.5},
|
||||
{"x":15.25, "y":5.5}
|
||||
]
|
||||
},
|
||||
"LAYOUT_iso": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.5, "y":0},
|
||||
{"x":2.5, "y":0},
|
||||
{"x":3.5, "y":0},
|
||||
{"x":4.5, "y":0},
|
||||
{"x":5.75, "y":0},
|
||||
{"x":6.75, "y":0},
|
||||
{"x":7.75, "y":0},
|
||||
{"x":8.75, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0},
|
||||
{"x":14.5, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
|
||||
{"x":0, "y":1.25},
|
||||
{"x":1, "y":1.25},
|
||||
{"x":2, "y":1.25},
|
||||
{"x":3, "y":1.25},
|
||||
{"x":4, "y":1.25},
|
||||
{"x":5, "y":1.25},
|
||||
{"x":6, "y":1.25},
|
||||
{"x":7, "y":1.25},
|
||||
{"x":8, "y":1.25},
|
||||
{"x":9, "y":1.25},
|
||||
{"x":10, "y":1.25},
|
||||
{"x":11, "y":1.25},
|
||||
{"x":12, "y":1.25},
|
||||
{"x":13, "y":1.25, "w":2},
|
||||
{"x":15.5, "y":1.25},
|
||||
|
||||
{"x":0, "y":2.25, "w":1.5},
|
||||
{"x":1.5, "y":2.25},
|
||||
{"x":2.5, "y":2.25},
|
||||
{"x":3.5, "y":2.25},
|
||||
{"x":4.5, "y":2.25},
|
||||
{"x":5.5, "y":2.25},
|
||||
{"x":6.5, "y":2.25},
|
||||
{"x":7.5, "y":2.25},
|
||||
{"x":8.5, "y":2.25},
|
||||
{"x":9.5, "y":2.25},
|
||||
{"x":10.5, "y":2.25},
|
||||
{"x":11.5, "y":2.25},
|
||||
{"x":12.5, "y":2.25},
|
||||
{"x":15.5, "y":2.25},
|
||||
|
||||
{"x":0, "y":3.25, "w":1.75},
|
||||
{"x":1.75, "y":3.25},
|
||||
{"x":2.75, "y":3.25},
|
||||
{"x":3.75, "y":3.25},
|
||||
{"x":4.75, "y":3.25},
|
||||
{"x":5.75, "y":3.25},
|
||||
{"x":6.75, "y":3.25},
|
||||
{"x":7.75, "y":3.25},
|
||||
{"x":8.75, "y":3.25},
|
||||
{"x":9.75, "y":3.25},
|
||||
{"x":10.75, "y":3.25},
|
||||
{"x":11.75, "y":3.25},
|
||||
{"x":12.75, "y":3.25},
|
||||
{"x":13.75, "y":2.25, "w":1.25, "h":2},
|
||||
{"x":15.5, "y":3.25},
|
||||
|
||||
{"x":0, "y":4.25, "w":1.25},
|
||||
{"x":1.25, "y":4.25},
|
||||
{"x":2.25, "y":4.25},
|
||||
{"x":3.25, "y":4.25},
|
||||
{"x":4.25, "y":4.25},
|
||||
{"x":5.25, "y":4.25},
|
||||
{"x":6.25, "y":4.25},
|
||||
{"x":7.25, "y":4.25},
|
||||
{"x":8.25, "y":4.25},
|
||||
{"x":9.25, "y":4.25},
|
||||
{"x":10.25, "y":4.25},
|
||||
{"x":11.25, "y":4.25},
|
||||
{"x":12.25, "y":4.25, "w":1.75},
|
||||
{"x":14.25, "y":4.5},
|
||||
{"x":15.5, "y":4.25},
|
||||
|
||||
{"x":0, "y":5.25, "w":1.25},
|
||||
{"x":1.25, "y":5.25, "w":1.25},
|
||||
{"x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"x":10, "y":5.25},
|
||||
{"x":11, "y":5.25},
|
||||
{"x":12, "y":5.25},
|
||||
{"x":13.25, "y":5.5},
|
||||
{"x":14.25, "y":5.5},
|
||||
{"x":15.25, "y":5.5}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
34
keyboards/evyd13/eon75/keymaps/default/keymap.c
Normal file
34
keyboards/evyd13/eon75/keymaps/default/keymap.c
Normal file
@@ -0,0 +1,34 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_END,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
[1] = LAYOUT_all(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
};
|
||||
47
keyboards/evyd13/eon75/keymaps/via/keymap.c
Normal file
47
keyboards/evyd13/eon75/keymaps/via/keymap.c
Normal file
@@ -0,0 +1,47 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_END,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
[1] = LAYOUT_all(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
[2] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
[3] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______)
|
||||
};
|
||||
2
keyboards/evyd13/eon75/keymaps/via/rules.mk
Normal file
2
keyboards/evyd13/eon75/keymaps/via/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
||||
13
keyboards/evyd13/eon75/readme.md
Normal file
13
keyboards/evyd13/eon75/readme.md
Normal file
@@ -0,0 +1,13 @@
|
||||
# Eon75
|
||||
|
||||
## Support
|
||||
* Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
|
||||
* Hardware Supported: Eon75
|
||||
* Hardware Availability: None
|
||||
|
||||
## Build
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make evyd13/eon75:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
32
keyboards/evyd13/eon75/rules.mk
Normal file
32
keyboards/evyd13/eon75/rules.mk
Normal file
@@ -0,0 +1,32 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
220
keyboards/evyd13/eon87/config.h
Normal file
220
keyboards/evyd13/eon87/config.h
Normal file
@@ -0,0 +1,220 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0xAA6B
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Evyd13
|
||||
#define PRODUCT Eon87
|
||||
#define DESCRIPTION A TKL PCB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 17
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS {B1,B2,B3,D4,D1,D5}
|
||||
#define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,C7,C6,B6,B5,B4,D7,D6,E6,B7,D3,D2}
|
||||
#define UNUSED_PINS {B0}
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define RGB_DI_PIN D0
|
||||
// #ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 12
|
||||
// #define RGBLIGHT_HUE_STEP 8
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
// /*== customize breathing effect ==*/
|
||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
// /*==== use exp() and sin() ====*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
// #endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
16
keyboards/evyd13/eon87/eon87.c
Normal file
16
keyboards/evyd13/eon87/eon87.c
Normal file
@@ -0,0 +1,16 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "eon87.h"
|
||||
79
keyboards/evyd13/eon87/eon87.h
Normal file
79
keyboards/evyd13/eon87/eon87.h
Normal file
@@ -0,0 +1,79 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT_all( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k0d, k1d, k1e, k1f, k1g, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4f, \
|
||||
k50, k51, k52, k54, k56, k58, k5a, k5b, k5c, k5d, k5e, k5f, k5g \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX, XXX, XXX }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, XXX, k4f, XXX }, \
|
||||
{ k50, k51, k52, XXX, k54, XXX, k56, XXX, k58, XXX, k5a, k5b, k5c, k5d, k5e, k5f, k5g } \
|
||||
}
|
||||
|
||||
#define LAYOUT_tkl_ansi( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
|
||||
k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4f, \
|
||||
k50, k51, k52, k56, k5a, k5b, k5c, k5d, k5e, k5f, k5g \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e, k0f, k0g }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d, XXX, XXX, XXX }, \
|
||||
{ k40, XXX, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, XXX, XXX, k4f, XXX }, \
|
||||
{ k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, k5g } \
|
||||
}
|
||||
|
||||
#define LAYOUT_tkl_iso( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4f, \
|
||||
k50, k51, k52, k56, k5a, k5b, k5c, k5d, k5e, k5f, k5g \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e, k0f, k0g }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, XXX, k2e, k2f, k2g }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX, XXX, XXX }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, XXX, XXX, k4f, XXX }, \
|
||||
{ k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, k5g } \
|
||||
}
|
||||
319
keyboards/evyd13/eon87/info.json
Normal file
319
keyboards/evyd13/eon87/info.json
Normal file
@@ -0,0 +1,319 @@
|
||||
{
|
||||
"keyboard_name": "Eon87",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 18.25,
|
||||
"height": 6.25,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{"x": 0, "y": 0},
|
||||
{"x": 2, "y": 0},
|
||||
{"x": 3, "y": 0},
|
||||
{"x": 4, "y": 0},
|
||||
{"x": 5, "y": 0},
|
||||
{"x": 6.5, "y": 0},
|
||||
{"x": 7.5, "y": 0},
|
||||
{"x": 8.5, "y": 0},
|
||||
{"x": 9.5, "y": 0},
|
||||
{"x": 11, "y": 0},
|
||||
{"x": 12, "y": 0},
|
||||
{"x": 13, "y": 0},
|
||||
{"x": 14, "y": 0},
|
||||
|
||||
{"x": 15.25, "y": 0},
|
||||
{"x": 16.25, "y": 0},
|
||||
{"x": 17.25, "y": 0},
|
||||
|
||||
{"x": 0, "y": 1.25},
|
||||
{"x": 1, "y": 1.25},
|
||||
{"x": 2, "y": 1.25},
|
||||
{"x": 3, "y": 1.25},
|
||||
{"x": 4, "y": 1.25},
|
||||
{"x": 5, "y": 1.25},
|
||||
{"x": 6, "y": 1.25},
|
||||
{"x": 7, "y": 1.25},
|
||||
{"x": 8, "y": 1.25},
|
||||
{"x": 9, "y": 1.25},
|
||||
{"x": 10, "y": 1.25},
|
||||
{"x": 11, "y": 1.25},
|
||||
{"x": 12, "y": 1.25},
|
||||
{"x": 13, "y": 1.25},
|
||||
{"x": 14, "y": 1.25},
|
||||
|
||||
{"x": 15.25, "y": 1.25},
|
||||
{"x": 16.25, "y": 1.25},
|
||||
{"x": 17.25, "y": 1.25},
|
||||
|
||||
{"x": 0, "y": 2.25, "w": 1.5},
|
||||
{"x": 1.5, "y": 2.25},
|
||||
{"x": 2.5, "y": 2.25},
|
||||
{"x": 3.5, "y": 2.25},
|
||||
{"x": 4.5, "y": 2.25},
|
||||
{"x": 5.5, "y": 2.25},
|
||||
{"x": 6.5, "y": 2.25},
|
||||
{"x": 7.5, "y": 2.25},
|
||||
{"x": 8.5, "y": 2.25},
|
||||
{"x": 9.5, "y": 2.25},
|
||||
{"x": 10.5, "y": 2.25},
|
||||
{"x": 11.5, "y": 2.25},
|
||||
{"x": 12.5, "y": 2.25},
|
||||
{"x": 13.5, "y": 2.25, "w": 1.5},
|
||||
|
||||
{"x": 15.25, "y": 2.25},
|
||||
{"x": 16.25, "y": 2.25},
|
||||
{"x": 17.25, "y": 2.25},
|
||||
|
||||
{"x": 0, "y": 3.25, "w": 1.75},
|
||||
{"x": 1.75, "y": 3.25},
|
||||
{"x": 2.75, "y": 3.25},
|
||||
{"x": 3.75, "y": 3.25},
|
||||
{"x": 4.75, "y": 3.25},
|
||||
{"x": 5.75, "y": 3.25},
|
||||
{"x": 6.75, "y": 3.25},
|
||||
{"x": 7.75, "y": 3.25},
|
||||
{"x": 8.75, "y": 3.25},
|
||||
{"x": 9.75, "y": 3.25},
|
||||
{"x": 10.75, "y": 3.25},
|
||||
{"x": 11.75, "y": 3.25},
|
||||
{"x": 12.75, "y": 3.25},
|
||||
{"x": 13.75, "y": 3.25, "w": 1.25},
|
||||
|
||||
{"x": 0, "y": 4.25, "w": 1.25},
|
||||
{"x": 1.25, "y": 4.25},
|
||||
{"x": 2.25, "y": 4.25},
|
||||
{"x": 3.25, "y": 4.25},
|
||||
{"x": 4.25, "y": 4.25},
|
||||
{"x": 5.25, "y": 4.25},
|
||||
{"x": 6.25, "y": 4.25},
|
||||
{"x": 7.25, "y": 4.25},
|
||||
{"x": 8.25, "y": 4.25},
|
||||
{"x": 9.25, "y": 4.25},
|
||||
{"x": 10.25, "y": 4.25},
|
||||
{"x": 11.25, "y": 4.25},
|
||||
{"x": 12.25, "y": 4.25, "w": 1.75},
|
||||
{"x": 14, "y": 4.25},
|
||||
|
||||
{"x": 16.25, "y": 4.25},
|
||||
|
||||
{"x": 0, "y": 5.25, "w": 1.25},
|
||||
{"x": 1.25, "y": 5.25, "w": 1.25},
|
||||
{"x": 2.5, "y": 5.25, "w": 1.25},
|
||||
{"x": 3.75, "y": 5.25, "w": 2.25},
|
||||
{"x": 6, "y": 5.25, "w": 1.25},
|
||||
{"x": 7.25, "y": 5.25, "w": 2.75},
|
||||
{"x": 10, "y": 5.25, "w": 1.25},
|
||||
{"x": 11.25, "y": 5.25, "w": 1.25},
|
||||
{"x": 12.5, "y": 5.25, "w": 1.25},
|
||||
{"x": 13.75, "y": 5.25, "w": 1.25},
|
||||
|
||||
{"x": 15.25, "y": 5.25},
|
||||
{"x": 16.25, "y": 5.25},
|
||||
{"x": 17.25, "y": 5.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_tkl_ansi": {
|
||||
"layout": [
|
||||
{"x": 0, "y": 0},
|
||||
{"x": 2, "y": 0},
|
||||
{"x": 3, "y": 0},
|
||||
{"x": 4, "y": 0},
|
||||
{"x": 5, "y": 0},
|
||||
{"x": 6.5, "y": 0},
|
||||
{"x": 7.5, "y": 0},
|
||||
{"x": 8.5, "y": 0},
|
||||
{"x": 9.5, "y": 0},
|
||||
{"x": 11, "y": 0},
|
||||
{"x": 12, "y": 0},
|
||||
{"x": 13, "y": 0},
|
||||
{"x": 14, "y": 0},
|
||||
|
||||
{"x": 15.25, "y": 0},
|
||||
{"x": 16.25, "y": 0},
|
||||
{"x": 17.25, "y": 0},
|
||||
|
||||
{"x": 0, "y": 1.25},
|
||||
{"x": 1, "y": 1.25},
|
||||
{"x": 2, "y": 1.25},
|
||||
{"x": 3, "y": 1.25},
|
||||
{"x": 4, "y": 1.25},
|
||||
{"x": 5, "y": 1.25},
|
||||
{"x": 6, "y": 1.25},
|
||||
{"x": 7, "y": 1.25},
|
||||
{"x": 8, "y": 1.25},
|
||||
{"x": 9, "y": 1.25},
|
||||
{"x": 10, "y": 1.25},
|
||||
{"x": 11, "y": 1.25},
|
||||
{"x": 12, "y": 1.25},
|
||||
{"x": 13, "y": 1.25, "w": 2},
|
||||
|
||||
{"x": 15.25, "y": 1.25},
|
||||
{"x": 16.25, "y": 1.25},
|
||||
{"x": 17.25, "y": 1.25},
|
||||
|
||||
{"x": 0, "y": 2.25, "w": 1.5},
|
||||
{"x": 1.5, "y": 2.25},
|
||||
{"x": 2.5, "y": 2.25},
|
||||
{"x": 3.5, "y": 2.25},
|
||||
{"x": 4.5, "y": 2.25},
|
||||
{"x": 5.5, "y": 2.25},
|
||||
{"x": 6.5, "y": 2.25},
|
||||
{"x": 7.5, "y": 2.25},
|
||||
{"x": 8.5, "y": 2.25},
|
||||
{"x": 9.5, "y": 2.25},
|
||||
{"x": 10.5, "y": 2.25},
|
||||
{"x": 11.5, "y": 2.25},
|
||||
{"x": 12.5, "y": 2.25},
|
||||
{"x": 13.5, "y": 2.25, "w": 1.5},
|
||||
|
||||
{"x": 15.25, "y": 2.25},
|
||||
{"x": 16.25, "y": 2.25},
|
||||
{"x": 17.25, "y": 2.25},
|
||||
|
||||
{"x": 0, "y": 3.25, "w": 1.75},
|
||||
{"x": 1.75, "y": 3.25},
|
||||
{"x": 2.75, "y": 3.25},
|
||||
{"x": 3.75, "y": 3.25},
|
||||
{"x": 4.75, "y": 3.25},
|
||||
{"x": 5.75, "y": 3.25},
|
||||
{"x": 6.75, "y": 3.25},
|
||||
{"x": 7.75, "y": 3.25},
|
||||
{"x": 8.75, "y": 3.25},
|
||||
{"x": 9.75, "y": 3.25},
|
||||
{"x": 10.75, "y": 3.25},
|
||||
{"x": 11.75, "y": 3.25},
|
||||
{"x": 12.75, "y": 3.25, "w": 2.25},
|
||||
|
||||
{"x": 0, "y": 4.25, "w": 2.25},
|
||||
{"x": 2.25, "y": 4.25},
|
||||
{"x": 3.25, "y": 4.25},
|
||||
{"x": 4.25, "y": 4.25},
|
||||
{"x": 5.25, "y": 4.25},
|
||||
{"x": 6.25, "y": 4.25},
|
||||
{"x": 7.25, "y": 4.25},
|
||||
{"x": 8.25, "y": 4.25},
|
||||
{"x": 9.25, "y": 4.25},
|
||||
{"x": 10.25, "y": 4.25},
|
||||
{"x": 11.25, "y": 4.25},
|
||||
{"x": 12.25, "y": 4.25, "w": 2.75},
|
||||
|
||||
{"x": 16.25, "y": 4.25},
|
||||
|
||||
{"x": 0, "y": 5.25, "w": 1.25},
|
||||
{"x": 1.25, "y": 5.25, "w": 1.25},
|
||||
{"x": 2.5, "y": 5.25, "w": 1.25},
|
||||
{"x": 3.75, "y": 5.25, "w": 6.25},
|
||||
{"x": 10, "y": 5.25, "w": 1.25},
|
||||
{"x": 11.25, "y": 5.25, "w": 1.25},
|
||||
{"x": 12.5, "y": 5.25, "w": 1.25},
|
||||
{"x": 13.75, "y": 5.25, "w": 1.25},
|
||||
|
||||
{"x": 15.25, "y": 5.25},
|
||||
{"x": 16.25, "y": 5.25},
|
||||
{"x": 17.25, "y": 5.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_tkl_iso": {
|
||||
"layout": [
|
||||
{"x": 0, "y": 0},
|
||||
{"x": 2, "y": 0},
|
||||
{"x": 3, "y": 0},
|
||||
{"x": 4, "y": 0},
|
||||
{"x": 5, "y": 0},
|
||||
{"x": 6.5, "y": 0},
|
||||
{"x": 7.5, "y": 0},
|
||||
{"x": 8.5, "y": 0},
|
||||
{"x": 9.5, "y": 0},
|
||||
{"x": 11, "y": 0},
|
||||
{"x": 12, "y": 0},
|
||||
{"x": 13, "y": 0},
|
||||
{"x": 14, "y": 0},
|
||||
|
||||
{"x": 15.25, "y": 0},
|
||||
{"x": 16.25, "y": 0},
|
||||
{"x": 17.25, "y": 0},
|
||||
|
||||
{"x": 0, "y": 1.25},
|
||||
{"x": 1, "y": 1.25},
|
||||
{"x": 2, "y": 1.25},
|
||||
{"x": 3, "y": 1.25},
|
||||
{"x": 4, "y": 1.25},
|
||||
{"x": 5, "y": 1.25},
|
||||
{"x": 6, "y": 1.25},
|
||||
{"x": 7, "y": 1.25},
|
||||
{"x": 8, "y": 1.25},
|
||||
{"x": 9, "y": 1.25},
|
||||
{"x": 10, "y": 1.25},
|
||||
{"x": 11, "y": 1.25},
|
||||
{"x": 12, "y": 1.25},
|
||||
{"x": 13, "y": 1.25, "w": 2},
|
||||
|
||||
{"x": 15.25, "y": 1.25},
|
||||
{"x": 16.25, "y": 1.25},
|
||||
{"x": 17.25, "y": 1.25},
|
||||
|
||||
{"x": 0, "y": 2.25, "w": 1.5},
|
||||
{"x": 1.5, "y": 2.25},
|
||||
{"x": 2.5, "y": 2.25},
|
||||
{"x": 3.5, "y": 2.25},
|
||||
{"x": 4.5, "y": 2.25},
|
||||
{"x": 5.5, "y": 2.25},
|
||||
{"x": 6.5, "y": 2.25},
|
||||
{"x": 7.5, "y": 2.25},
|
||||
{"x": 8.5, "y": 2.25},
|
||||
{"x": 9.5, "y": 2.25},
|
||||
{"x": 10.5, "y": 2.25},
|
||||
{"x": 11.5, "y": 2.25},
|
||||
{"x": 12.5, "y": 2.25},
|
||||
|
||||
{"x": 15.25, "y": 2.25},
|
||||
{"x": 16.25, "y": 2.25},
|
||||
{"x": 17.25, "y": 2.25},
|
||||
|
||||
{"x": 0, "y": 3.25, "w": 1.75},
|
||||
{"x": 1.75, "y": 3.25},
|
||||
{"x": 2.75, "y": 3.25},
|
||||
{"x": 3.75, "y": 3.25},
|
||||
{"x": 4.75, "y": 3.25},
|
||||
{"x": 5.75, "y": 3.25},
|
||||
{"x": 6.75, "y": 3.25},
|
||||
{"x": 7.75, "y": 3.25},
|
||||
{"x": 8.75, "y": 3.25},
|
||||
{"x": 9.75, "y": 3.25},
|
||||
{"x": 10.75, "y": 3.25},
|
||||
{"x": 11.75, "y": 3.25},
|
||||
{"x": 12.75, "y": 3.25},
|
||||
{"x": 13.75, "y": 2.25, "w": 1.25, "h": 2},
|
||||
|
||||
{"x": 0, "y": 4.25, "w": 1.25},
|
||||
{"x": 1.25, "y": 4.25},
|
||||
{"x": 2.25, "y": 4.25},
|
||||
{"x": 3.25, "y": 4.25},
|
||||
{"x": 4.25, "y": 4.25},
|
||||
{"x": 5.25, "y": 4.25},
|
||||
{"x": 6.25, "y": 4.25},
|
||||
{"x": 7.25, "y": 4.25},
|
||||
{"x": 8.25, "y": 4.25},
|
||||
{"x": 9.25, "y": 4.25},
|
||||
{"x": 10.25, "y": 4.25},
|
||||
{"x": 11.25, "y": 4.25},
|
||||
{"x": 12.25, "y": 4.25, "w": 2.75},
|
||||
|
||||
{"x": 16.25, "y": 4.25},
|
||||
|
||||
{"x": 0, "y": 5.25, "w": 1.25},
|
||||
{"x": 1.25, "y": 5.25, "w": 1.25},
|
||||
{"x": 2.5, "y": 5.25, "w": 1.25},
|
||||
{"x": 3.75, "y": 5.25, "w": 6.25},
|
||||
{"x": 10, "y": 5.25, "w": 1.25},
|
||||
{"x": 11.25, "y": 5.25, "w": 1.25},
|
||||
{"x": 12.5, "y": 5.25, "w": 1.25},
|
||||
{"x": 13.75, "y": 5.25, "w": 1.25},
|
||||
|
||||
{"x": 15.25, "y": 5.25},
|
||||
{"x": 16.25, "y": 5.25},
|
||||
{"x": 17.25, "y": 5.25}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
42
keyboards/evyd13/eon87/keymaps/default/keymap.c
Normal file
42
keyboards/evyd13/eon87/keymaps/default/keymap.c
Normal file
@@ -0,0 +1,42 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
|
||||
#define _MA 0 //Main layer
|
||||
#define _FN 1 //Main layer
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_MA] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), KC_UP,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
[_FN] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
};
|
||||
1
keyboards/evyd13/eon87/keymaps/default/readme.md
Normal file
1
keyboards/evyd13/eon87/keymaps/default/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
This is the default keymap for the Eon87.
|
||||
50
keyboards/evyd13/eon87/keymaps/via/keymap.c
Normal file
50
keyboards/evyd13/eon87/keymaps/via/keymap.c
Normal file
@@ -0,0 +1,50 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
[1] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
[2] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
[3] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
};
|
||||
2
keyboards/evyd13/eon87/keymaps/via/rules.mk
Normal file
2
keyboards/evyd13/eon87/keymaps/via/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
||||
13
keyboards/evyd13/eon87/readme.md
Normal file
13
keyboards/evyd13/eon87/readme.md
Normal file
@@ -0,0 +1,13 @@
|
||||
# Eon87
|
||||
|
||||
## Support
|
||||
* Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
|
||||
* Hardware Supported: Eon87
|
||||
* Hardware Availability: [maartenwut.com](https://maartenwut.com)
|
||||
|
||||
## Build
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make evyd13/eon87:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
34
keyboards/evyd13/eon87/rules.mk
Normal file
34
keyboards/evyd13/eon87/rules.mk
Normal file
@@ -0,0 +1,34 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
|
||||
LAYOUTS = tkl_ansi tkl_iso
|
||||
222
keyboards/evyd13/eon95/config.h
Normal file
222
keyboards/evyd13/eon95/config.h
Normal file
@@ -0,0 +1,222 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0x8A18
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Evyd13
|
||||
#define PRODUCT Eon95
|
||||
#define DESCRIPTION A 95% PCB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 12
|
||||
#define MATRIX_COLS 10
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS {D1,D0,D3,D2,D6,D4,D7,B4,B5,B6,C6,C7}
|
||||
#define MATRIX_COL_PINS {E6,F0,F1,F4,F5,F6,F7,B3,B2,B1}
|
||||
#define UNUSED_PINS {}
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
// #define RGB_DI_PIN D0
|
||||
// #ifdef RGB_DI_PIN
|
||||
// #define RGBLED_NUM 12
|
||||
// #define RGBLIGHT_HUE_STEP 8
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
// #define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
// /*== customize breathing effect ==*/
|
||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
// /*==== use exp() and sin() ====*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
// #endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
|
||||
45
keyboards/evyd13/eon95/eon95.c
Normal file
45
keyboards/evyd13/eon95/eon95.c
Normal file
@@ -0,0 +1,45 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "eon95.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output and high
|
||||
setPinOutput(D5);
|
||||
writePinHigh(D5);
|
||||
|
||||
setPinOutput(B7);
|
||||
writePinHigh(B7);
|
||||
|
||||
setPinOutput(B0);
|
||||
writePinHigh(B0);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if(led_update_user(led_state)) {
|
||||
writePin(D5, !led_state.caps_lock);
|
||||
writePin(B7, !led_state.num_lock);
|
||||
writePin(B0, !led_state.scroll_lock);
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
96
keyboards/evyd13/eon95/eon95.h
Normal file
96
keyboards/evyd13/eon95/eon95.h
Normal file
@@ -0,0 +1,96 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT_all( \
|
||||
k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, k09, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k38, k29, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, k48, k58, k49, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, \
|
||||
k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, k88, k98, k89, \
|
||||
ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7, ka8, kb8 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
|
||||
{ k10, k11, XXX, k13, k14, k15, k16, k17, k18, XXX }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, XXX }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, XXX, k57, k58, XXX }, \
|
||||
{ k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69 }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, k77, k78, XXX }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, k87, k88, k89 }, \
|
||||
{ k90, k91, k92, k93, k94, k95, XXX, k97, k98, XXX }, \
|
||||
{ ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7, ka8, XXX }, \
|
||||
{ kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7, kb8, XXX } \
|
||||
}
|
||||
|
||||
#define LAYOUT_ansi( \
|
||||
k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, k09, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k27, k37, k28, k38, k29, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, k48, k58, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k77, k68, k78, k69, \
|
||||
k80, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, k88, k98, k89, \
|
||||
ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7, ka8, kb8 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
|
||||
{ k10, k11, XXX, k13, k14, k15, k16, k17, k18, XXX }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
|
||||
{ k30, k31, k32, k33, k34, k35, XXX, k37, k38, XXX }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, XXX }, \
|
||||
{ k50, k51, k52, k53, k54, k55, XXX, k57, k58, XXX }, \
|
||||
{ k60, k61, k62, k63, k64, k65, XXX, XXX, k68, k69 }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, k77, k78, XXX }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, k87, k88, k89 }, \
|
||||
{ XXX, k91, k92, k93, k94, k95, XXX, k97, k98, XXX }, \
|
||||
{ ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7, ka8, XXX }, \
|
||||
{ kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7, kb8, XXX } \
|
||||
}
|
||||
#define LAYOUT_iso( \
|
||||
k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, k09, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k27, k37, k28, k38, k29, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k57, k48, k58, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, \
|
||||
k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, k88, k98, k89, \
|
||||
ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7, ka8, kb8 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
|
||||
{ k10, k11, XXX, k13, k14, k15, k16, k17, k18, XXX }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
|
||||
{ k30, k31, k32, k33, k34, k35, XXX, k37, k38, XXX }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, XXX, k48, XXX }, \
|
||||
{ k50, k51, k52, k53, k54, k55, XXX, k57, k58, XXX }, \
|
||||
{ k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69 }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, k77, k78, XXX }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, k87, k88, k89 }, \
|
||||
{ k90, k91, k92, k93, k94, k95, XXX, k97, k98, XXX }, \
|
||||
{ ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7, ka8, XXX }, \
|
||||
{ kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7, kb8, XXX } \
|
||||
}
|
||||
338
keyboards/evyd13/eon95/info.json
Normal file
338
keyboards/evyd13/eon95/info.json
Normal file
@@ -0,0 +1,338 @@
|
||||
{
|
||||
"keyboard_name": "Eon95",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 19.5,
|
||||
"height": 6.5,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.5, "y":0},
|
||||
{"x":2.5, "y":0},
|
||||
{"x":3.5, "y":0},
|
||||
{"x":4.5, "y":0},
|
||||
{"x":5.75, "y":0},
|
||||
{"x":6.75, "y":0},
|
||||
{"x":7.75, "y":0},
|
||||
{"x":8.75, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0},
|
||||
{"x":14.5, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
{"x":16.5, "y":0},
|
||||
{"x":17.5, "y":0},
|
||||
{"x":18.5, "y":0},
|
||||
|
||||
{"x":0, "y":1.25},
|
||||
{"x":1, "y":1.25},
|
||||
{"x":2, "y":1.25},
|
||||
{"x":3, "y":1.25},
|
||||
{"x":4, "y":1.25},
|
||||
{"x":5, "y":1.25},
|
||||
{"x":6, "y":1.25},
|
||||
{"x":7, "y":1.25},
|
||||
{"x":8, "y":1.25},
|
||||
{"x":9, "y":1.25},
|
||||
{"x":10, "y":1.25},
|
||||
{"x":11, "y":1.25},
|
||||
{"x":12, "y":1.25},
|
||||
{"x":13, "y":1.25},
|
||||
{"x":14, "y":1.25},
|
||||
{"x":15.5, "y":1.25},
|
||||
{"x":16.5, "y":1.25},
|
||||
{"x":17.5, "y":1.25},
|
||||
{"x":18.5, "y":1.25},
|
||||
|
||||
{"x":0, "y":2.25, "w":1.5},
|
||||
{"x":1.5, "y":2.25},
|
||||
{"x":2.5, "y":2.25},
|
||||
{"x":3.5, "y":2.25},
|
||||
{"x":4.5, "y":2.25},
|
||||
{"x":5.5, "y":2.25},
|
||||
{"x":6.5, "y":2.25},
|
||||
{"x":7.5, "y":2.25},
|
||||
{"x":8.5, "y":2.25},
|
||||
{"x":9.5, "y":2.25},
|
||||
{"x":10.5, "y":2.25},
|
||||
{"x":11.5, "y":2.25},
|
||||
{"x":12.5, "y":2.25},
|
||||
{"x":13.5, "y":2.25, "w":1.5},
|
||||
{"x":15.5, "y":2.25},
|
||||
{"x":16.5, "y":2.25},
|
||||
{"x":17.5, "y":2.25},
|
||||
{"x":18.5, "y":2.25},
|
||||
|
||||
{"x":0, "y":3.25, "w":1.75},
|
||||
{"x":1.75, "y":3.25},
|
||||
{"x":2.75, "y":3.25},
|
||||
{"x":3.75, "y":3.25},
|
||||
{"x":4.75, "y":3.25},
|
||||
{"x":5.75, "y":3.25},
|
||||
{"x":6.75, "y":3.25},
|
||||
{"x":7.75, "y":3.25},
|
||||
{"x":8.75, "y":3.25},
|
||||
{"x":9.75, "y":3.25},
|
||||
{"x":10.75, "y":3.25},
|
||||
{"x":11.75, "y":3.25},
|
||||
{"x":12.75, "y":3.25},
|
||||
{"x":13.75, "y":3.25, "w":1.25},
|
||||
{"x":15.5, "y":3.25},
|
||||
{"x":16.5, "y":3.25},
|
||||
{"x":17.5, "y":3.25},
|
||||
{"x":18.5, "y":3.25},
|
||||
|
||||
{"x":0, "y":4.25, "w":1.25},
|
||||
{"x":1.25, "y":4.25},
|
||||
{"x":2.25, "y":4.25},
|
||||
{"x":3.25, "y":4.25},
|
||||
{"x":4.25, "y":4.25},
|
||||
{"x":5.25, "y":4.25},
|
||||
{"x":6.25, "y":4.25},
|
||||
{"x":7.25, "y":4.25},
|
||||
{"x":8.25, "y":4.25},
|
||||
{"x":9.25, "y":4.25},
|
||||
{"x":10.25, "y":4.25},
|
||||
{"x":11.25, "y":4.25},
|
||||
{"x":12.25, "y":4.25, "w":1.75},
|
||||
{"x":14.25, "y":4.5},
|
||||
{"x":15.5, "y":4.25},
|
||||
{"x":16.5, "y":4.25},
|
||||
{"x":17.5, "y":4.25},
|
||||
{"x":18.5, "y":4.25, "h":2},
|
||||
|
||||
{"x":0, "y":5.25, "w":1.25},
|
||||
{"x":1.25, "y":5.25, "w":1.25},
|
||||
{"x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"x":10, "y":5.25},
|
||||
{"x":11, "y":5.25},
|
||||
{"x":12, "y":5.25},
|
||||
{"x":13.25, "y":5.5},
|
||||
{"x":14.25, "y":5.5},
|
||||
{"x":15.25, "y":5.5},
|
||||
{"x":16.5, "y":5.25},
|
||||
{"x":17.5, "y":5.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_ansi": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.5, "y":0},
|
||||
{"x":2.5, "y":0},
|
||||
{"x":3.5, "y":0},
|
||||
{"x":4.5, "y":0},
|
||||
{"x":5.75, "y":0},
|
||||
{"x":6.75, "y":0},
|
||||
{"x":7.75, "y":0},
|
||||
{"x":8.75, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0},
|
||||
{"x":14.5, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
{"x":16.5, "y":0},
|
||||
{"x":17.5, "y":0},
|
||||
{"x":18.5, "y":0},
|
||||
|
||||
{"x":0, "y":1.25},
|
||||
{"x":1, "y":1.25},
|
||||
{"x":2, "y":1.25},
|
||||
{"x":3, "y":1.25},
|
||||
{"x":4, "y":1.25},
|
||||
{"x":5, "y":1.25},
|
||||
{"x":6, "y":1.25},
|
||||
{"x":7, "y":1.25},
|
||||
{"x":8, "y":1.25},
|
||||
{"x":9, "y":1.25},
|
||||
{"x":10, "y":1.25},
|
||||
{"x":11, "y":1.25},
|
||||
{"x":12, "y":1.25},
|
||||
{"x":13, "y":1.25, "w":2},
|
||||
{"x":15.5, "y":1.25},
|
||||
{"x":16.5, "y":1.25},
|
||||
{"x":17.5, "y":1.25},
|
||||
{"x":18.5, "y":1.25},
|
||||
|
||||
{"x":0, "y":2.25, "w":1.5},
|
||||
{"x":1.5, "y":2.25},
|
||||
{"x":2.5, "y":2.25},
|
||||
{"x":3.5, "y":2.25},
|
||||
{"x":4.5, "y":2.25},
|
||||
{"x":5.5, "y":2.25},
|
||||
{"x":6.5, "y":2.25},
|
||||
{"x":7.5, "y":2.25},
|
||||
{"x":8.5, "y":2.25},
|
||||
{"x":9.5, "y":2.25},
|
||||
{"x":10.5, "y":2.25},
|
||||
{"x":11.5, "y":2.25},
|
||||
{"x":12.5, "y":2.25},
|
||||
{"x":13.5, "y":2.25, "w":1.5},
|
||||
{"x":15.5, "y":2.25},
|
||||
{"x":16.5, "y":2.25},
|
||||
{"x":17.5, "y":2.25},
|
||||
|
||||
{"x":0, "y":3.25, "w":1.75},
|
||||
{"x":1.75, "y":3.25},
|
||||
{"x":2.75, "y":3.25},
|
||||
{"x":3.75, "y":3.25},
|
||||
{"x":4.75, "y":3.25},
|
||||
{"x":5.75, "y":3.25},
|
||||
{"x":6.75, "y":3.25},
|
||||
{"x":7.75, "y":3.25},
|
||||
{"x":8.75, "y":3.25},
|
||||
{"x":9.75, "y":3.25},
|
||||
{"x":10.75, "y":3.25},
|
||||
{"x":11.75, "y":3.25},
|
||||
{"x":12.75, "y":3.25, "w":2.25},
|
||||
{"x":15.5, "y":3.25},
|
||||
{"x":16.5, "y":3.25},
|
||||
{"x":17.5, "y":3.25},
|
||||
{"x":18.5, "y":2.25, "h":2},
|
||||
|
||||
{"x":0, "y":4.25, "w":2.25},
|
||||
{"x":2.25, "y":4.25},
|
||||
{"x":3.25, "y":4.25},
|
||||
{"x":4.25, "y":4.25},
|
||||
{"x":5.25, "y":4.25},
|
||||
{"x":6.25, "y":4.25},
|
||||
{"x":7.25, "y":4.25},
|
||||
{"x":8.25, "y":4.25},
|
||||
{"x":9.25, "y":4.25},
|
||||
{"x":10.25, "y":4.25},
|
||||
{"x":11.25, "y":4.25},
|
||||
{"x":12.25, "y":4.25, "w":1.75},
|
||||
{"x":14.25, "y":4.5},
|
||||
{"x":15.5, "y":4.25},
|
||||
{"x":16.5, "y":4.25},
|
||||
{"x":17.5, "y":4.25},
|
||||
{"x":18.5, "y":4.25, "h":2},
|
||||
|
||||
{"x":0, "y":5.25, "w":1.25},
|
||||
{"x":1.25, "y":5.25, "w":1.25},
|
||||
{"x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"x":10, "y":5.25},
|
||||
{"x":11, "y":5.25},
|
||||
{"x":12, "y":5.25},
|
||||
{"x":13.25, "y":5.5},
|
||||
{"x":14.25, "y":5.5},
|
||||
{"x":15.25, "y":5.5},
|
||||
{"x":16.5, "y":5.25},
|
||||
{"x":17.5, "y":5.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_iso": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.5, "y":0},
|
||||
{"x":2.5, "y":0},
|
||||
{"x":3.5, "y":0},
|
||||
{"x":4.5, "y":0},
|
||||
{"x":5.75, "y":0},
|
||||
{"x":6.75, "y":0},
|
||||
{"x":7.75, "y":0},
|
||||
{"x":8.75, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0},
|
||||
{"x":14.5, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
{"x":16.5, "y":0},
|
||||
{"x":17.5, "y":0},
|
||||
{"x":18.5, "y":0},
|
||||
|
||||
{"x":0, "y":1.25},
|
||||
{"x":1, "y":1.25},
|
||||
{"x":2, "y":1.25},
|
||||
{"x":3, "y":1.25},
|
||||
{"x":4, "y":1.25},
|
||||
{"x":5, "y":1.25},
|
||||
{"x":6, "y":1.25},
|
||||
{"x":7, "y":1.25},
|
||||
{"x":8, "y":1.25},
|
||||
{"x":9, "y":1.25},
|
||||
{"x":10, "y":1.25},
|
||||
{"x":11, "y":1.25},
|
||||
{"x":12, "y":1.25},
|
||||
{"x":13, "y":1.25, "w":2},
|
||||
{"x":15.5, "y":1.25},
|
||||
{"x":16.5, "y":1.25},
|
||||
{"x":17.5, "y":1.25},
|
||||
{"x":18.5, "y":1.25},
|
||||
|
||||
{"x":0, "y":2.25, "w":1.5},
|
||||
{"x":1.5, "y":2.25},
|
||||
{"x":2.5, "y":2.25},
|
||||
{"x":3.5, "y":2.25},
|
||||
{"x":4.5, "y":2.25},
|
||||
{"x":5.5, "y":2.25},
|
||||
{"x":6.5, "y":2.25},
|
||||
{"x":7.5, "y":2.25},
|
||||
{"x":8.5, "y":2.25},
|
||||
{"x":9.5, "y":2.25},
|
||||
{"x":10.5, "y":2.25},
|
||||
{"x":11.5, "y":2.25},
|
||||
{"x":12.5, "y":2.25},
|
||||
{"x":15.5, "y":2.25},
|
||||
{"x":16.5, "y":2.25},
|
||||
{"x":17.5, "y":2.25},
|
||||
|
||||
{"x":0, "y":3.25, "w":1.75},
|
||||
{"x":1.75, "y":3.25},
|
||||
{"x":2.75, "y":3.25},
|
||||
{"x":3.75, "y":3.25},
|
||||
{"x":4.75, "y":3.25},
|
||||
{"x":5.75, "y":3.25},
|
||||
{"x":6.75, "y":3.25},
|
||||
{"x":7.75, "y":3.25},
|
||||
{"x":8.75, "y":3.25},
|
||||
{"x":9.75, "y":3.25},
|
||||
{"x":10.75, "y":3.25},
|
||||
{"x":11.75, "y":3.25},
|
||||
{"x":12.75, "y":3.25},
|
||||
{"x":13.75, "y":2.25, "w":1.25, "h":2},
|
||||
{"x":15.5, "y":3.25},
|
||||
{"x":16.5, "y":3.25},
|
||||
{"x":17.5, "y":3.25},
|
||||
{"x":18.5, "y":2.25, "h":2},
|
||||
|
||||
{"x":0, "y":4.25, "w":1.25},
|
||||
{"x":1.25, "y":4.25},
|
||||
{"x":2.25, "y":4.25},
|
||||
{"x":3.25, "y":4.25},
|
||||
{"x":4.25, "y":4.25},
|
||||
{"x":5.25, "y":4.25},
|
||||
{"x":6.25, "y":4.25},
|
||||
{"x":7.25, "y":4.25},
|
||||
{"x":8.25, "y":4.25},
|
||||
{"x":9.25, "y":4.25},
|
||||
{"x":10.25, "y":4.25},
|
||||
{"x":11.25, "y":4.25},
|
||||
{"x":12.25, "y":4.25, "w":1.75},
|
||||
{"x":14.25, "y":4.5},
|
||||
{"x":15.5, "y":4.25},
|
||||
{"x":16.5, "y":4.25},
|
||||
{"x":17.5, "y":4.25},
|
||||
{"x":18.5, "y":4.25, "h":2},
|
||||
|
||||
{"x":0, "y":5.25, "w":1.25},
|
||||
{"x":1.25, "y":5.25, "w":1.25},
|
||||
{"x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"x":10, "y":5.25},
|
||||
{"x":11, "y":5.25},
|
||||
{"x":12, "y":5.25},
|
||||
{"x":13.25, "y":5.5},
|
||||
{"x":14.25, "y":5.5},
|
||||
{"x":15.25, "y":5.5},
|
||||
{"x":16.5, "y":5.25},
|
||||
{"x":17.5, "y":5.25}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
34
keyboards/evyd13/eon95/keymaps/default/keymap.c
Normal file
34
keyboards/evyd13/eon95/keymaps/default/keymap.c
Normal file
@@ -0,0 +1,34 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT),
|
||||
[1] = LAYOUT_all(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
};
|
||||
40
keyboards/evyd13/eon95/keymaps/via/keymap.c
Normal file
40
keyboards/evyd13/eon95/keymaps/via/keymap.c
Normal file
@@ -0,0 +1,40 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT),
|
||||
[1] = LAYOUT_all(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
[2] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______)
|
||||
};
|
||||
2
keyboards/evyd13/eon95/keymaps/via/rules.mk
Normal file
2
keyboards/evyd13/eon95/keymaps/via/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
||||
13
keyboards/evyd13/eon95/readme.md
Normal file
13
keyboards/evyd13/eon95/readme.md
Normal file
@@ -0,0 +1,13 @@
|
||||
# Eon95
|
||||
|
||||
## Support
|
||||
* Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
|
||||
* Hardware Supported: Eon95
|
||||
* Hardware Availability: None
|
||||
|
||||
## Build
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make evyd13/eon95:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
32
keyboards/evyd13/eon95/rules.mk
Normal file
32
keyboards/evyd13/eon95/rules.mk
Normal file
@@ -0,0 +1,32 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
143
keyboards/evyd13/gh80_1800/config.h
Normal file
143
keyboards/evyd13/gh80_1800/config.h
Normal file
@@ -0,0 +1,143 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0x8B23
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Evyd13
|
||||
#define PRODUCT GH80 1800
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 11
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS {D5,B4,B5,B6,C6,C7,B0,B2,B1,B3}
|
||||
#define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,D3,D2,D1,D0,B7}
|
||||
#define UNUSED_PINS {E6}
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
// #define RGB_DI_PIN D0
|
||||
// #ifdef RGB_DI_PIN
|
||||
// #define RGBLED_NUM 12
|
||||
// #define RGBLIGHT_HUE_STEP 8
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
// #define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
// /*== customize breathing effect ==*/
|
||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
// /*==== use exp() and sin() ====*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
// #endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
44
keyboards/evyd13/gh80_1800/gh80_1800.c
Normal file
44
keyboards/evyd13/gh80_1800/gh80_1800.c
Normal file
@@ -0,0 +1,44 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "gh80_1800.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
setPinOutput(D6);
|
||||
setPinOutput(D7);
|
||||
setPinOutput(D4);
|
||||
|
||||
writePinHigh(D6);
|
||||
writePinHigh(D7);
|
||||
writePinHigh(D4);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if(led_update_user(led_state)) {
|
||||
writePin(D6, !led_state.num_lock);
|
||||
writePin(D7, !led_state.caps_lock);
|
||||
writePin(D4, !led_state.scroll_lock);
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
94
keyboards/evyd13/gh80_1800/gh80_1800.h
Normal file
94
keyboards/evyd13/gh80_1800/gh80_1800.h
Normal file
@@ -0,0 +1,94 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT_all( \
|
||||
k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k07, k08, k09, k0a, \
|
||||
k17, k18, k19, k1a, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k36, k26, k16, k27, k28, k29, k2a, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k37, k38, k39, k3a, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k66, k47, k48, k49, k4a, \
|
||||
k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k97, k57, k58, k59, k5a, \
|
||||
k77, k87, k78, k88, k79, k89, k7a, k8a, k98, k99, k9a, k68, k69, k6a \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a}, \
|
||||
{k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a}, \
|
||||
{k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a}, \
|
||||
{k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69, k6a}, \
|
||||
{k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a}, \
|
||||
{k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a}, \
|
||||
{k90, k91, k92, k93, k94, k95, XXX, k97, k98, k99, k9a} \
|
||||
}
|
||||
|
||||
#define LAYOUT_1800_ansi( \
|
||||
k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k07, k08, k09, k0a, \
|
||||
k17, k18, k19, k1a, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k36, k16, k27, k28, k29, k2a, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k37, k38, k39, k3a, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k47, k48, k49, k4a, \
|
||||
k80, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k97, k57, k58, k59, \
|
||||
k77, k87, k78, k88, k79, k89, k7a, k8a, k98, k99, k9a, k68, k69, k6a \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a}, \
|
||||
{k20, k21, k22, k23, k24, k25, XXX, k27, k28, k29, k2a}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a}, \
|
||||
{k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a}, \
|
||||
{k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, XXX}, \
|
||||
{k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69, k6a}, \
|
||||
{k70, k71, k72, k73, k74, k75, XXX, k77, k78, k79, k7a}, \
|
||||
{k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a}, \
|
||||
{XXX, k91, k92, k93, k94, k95, XXX, k97, k98, k99, k9a} \
|
||||
}
|
||||
|
||||
#define LAYOUT_1800_iso( \
|
||||
k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k07, k08, k09, k0a, \
|
||||
k17, k18, k19, k1a, \
|
||||
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k36, k16, k27, k28, k29, k2a, \
|
||||
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k37, k38, k39, k3a, \
|
||||
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k66, k47, k48, k49, k4a, \
|
||||
k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k97, k57, k58, k59, \
|
||||
k77, k87, k78, k88, k79, k89, k7a, k8a, k98, k99, k9a, k68, k69, k6a \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a}, \
|
||||
{k20, k21, k22, k23, k24, k25, XXX, k27, k28, k29, k2a}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a}, \
|
||||
{k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a}, \
|
||||
{k50, k51, k52, k53, k54, k55, XXX, k57, k58, k59, XXX}, \
|
||||
{k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69, k6a}, \
|
||||
{k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a}, \
|
||||
{k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a}, \
|
||||
{k90, k91, k92, k93, k94, k95, XXX, k97, k98, k99, k9a} \
|
||||
}
|
||||
356
keyboards/evyd13/gh80_1800/info.json
Normal file
356
keyboards/evyd13/gh80_1800/info.json
Normal file
@@ -0,0 +1,356 @@
|
||||
{
|
||||
"keyboard_name": "GH80-1800",
|
||||
"url": "https://github.com/evyd13/gh80-series/tree/master/GH80-1800",
|
||||
"maintainer": "evyd13",
|
||||
"width": 19.5,
|
||||
"height": 7.25,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.25, "y":0},
|
||||
{"x":2.25, "y":0},
|
||||
{"x":3.25, "y":0},
|
||||
{"x":4.25, "y":0},
|
||||
{"x":5.5, "y":0},
|
||||
{"x":6.5, "y":0},
|
||||
{"x":7.5, "y":0},
|
||||
{"x":8.5, "y":0},
|
||||
{"x":9.75, "y":0},
|
||||
{"x":10.75, "y":0},
|
||||
{"x":11.75, "y":0},
|
||||
{"x":12.75, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
{"x":16.5, "y":0},
|
||||
{"x":17.5, "y":0},
|
||||
{"x":18.5, "y":0},
|
||||
|
||||
{"x":15.5, "y":1},
|
||||
{"x":16.5, "y":1},
|
||||
{"x":17.5, "y":1},
|
||||
{"x":18.5, "y":1},
|
||||
|
||||
{"x":0, "y":2},
|
||||
{"x":1, "y":2},
|
||||
{"x":2, "y":2},
|
||||
{"x":3, "y":2},
|
||||
{"x":4, "y":2},
|
||||
{"x":5, "y":2},
|
||||
{"x":6, "y":2},
|
||||
{"x":7, "y":2},
|
||||
{"x":8, "y":2},
|
||||
{"x":9, "y":2},
|
||||
{"x":10, "y":2},
|
||||
{"x":11, "y":2},
|
||||
{"x":12, "y":2},
|
||||
{"x":13, "y":2},
|
||||
{"x":14, "y":2},
|
||||
{"x":15.5, "y":2},
|
||||
{"x":16.5, "y":2},
|
||||
{"x":17.5, "y":2},
|
||||
{"x":18.5, "y":2},
|
||||
|
||||
{"x":0, "y":3, "w":1.5},
|
||||
{"x":1.5, "y":3},
|
||||
{"x":2.5, "y":3},
|
||||
{"x":3.5, "y":3},
|
||||
{"x":4.5, "y":3},
|
||||
{"x":5.5, "y":3},
|
||||
{"x":6.5, "y":3},
|
||||
{"x":7.5, "y":3},
|
||||
{"x":8.5, "y":3},
|
||||
{"x":9.5, "y":3},
|
||||
{"x":10.5, "y":3},
|
||||
{"x":11.5, "y":3},
|
||||
{"x":12.5, "y":3},
|
||||
{"x":13.5, "y":3, "w":1.5},
|
||||
{"x":15.5, "y":3},
|
||||
{"x":16.5, "y":3},
|
||||
{"x":17.5, "y":3},
|
||||
{"x":18.5, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.75},
|
||||
{"x":1.75, "y":4},
|
||||
{"x":2.75, "y":4},
|
||||
{"x":3.75, "y":4},
|
||||
{"x":4.75, "y":4},
|
||||
{"x":5.75, "y":4},
|
||||
{"x":6.75, "y":4},
|
||||
{"x":7.75, "y":4},
|
||||
{"x":8.75, "y":4},
|
||||
{"x":9.75, "y":4},
|
||||
{"x":10.75, "y":4},
|
||||
{"x":11.75, "y":4},
|
||||
{"x":12.75, "y":4},
|
||||
{"x":13.75, "y":4, "w":1.25},
|
||||
{"x":15.5, "y":4},
|
||||
{"x":16.5, "y":4},
|
||||
{"x":17.5, "y":4},
|
||||
{"x":18.5, "y":4},
|
||||
|
||||
{"x":0, "y":5, "w":1.25},
|
||||
{"x":1.25, "y":5},
|
||||
{"x":2.25, "y":5},
|
||||
{"x":3.25, "y":5},
|
||||
{"x":4.25, "y":5},
|
||||
{"x":5.25, "y":5},
|
||||
{"x":6.25, "y":5},
|
||||
{"x":7.25, "y":5},
|
||||
{"x":8.25, "y":5},
|
||||
{"x":9.25, "y":5},
|
||||
{"x":10.25, "y":5},
|
||||
{"x":11.25, "y":5},
|
||||
{"x":12.25, "y":5, "w":1.75},
|
||||
{"x":14.25, "y":5.25},
|
||||
{"x":15.5, "y":5},
|
||||
{"x":16.5, "y":5},
|
||||
{"x":17.5, "y":5},
|
||||
{"x":18.5, "y":5},
|
||||
|
||||
{"x":0, "y":6},
|
||||
{"x":1, "y":6},
|
||||
{"x":2, "y":6},
|
||||
{"x":3, "y":6, "w":6},
|
||||
{"x":9, "y":6},
|
||||
{"x":10, "y":6},
|
||||
{"x":11, "y":6},
|
||||
{"x":12, "y":6},
|
||||
{"x":13.25, "y":6.25},
|
||||
{"x":14.25, "y":6.25},
|
||||
{"x":15.25, "y":6.25},
|
||||
{"x":16.5, "y":6},
|
||||
{"x":17.5, "y":6},
|
||||
{"x":18.5, "y":6}
|
||||
]
|
||||
},
|
||||
"LAYOUT_1800_ansi": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.25, "y":0},
|
||||
{"x":2.25, "y":0},
|
||||
{"x":3.25, "y":0},
|
||||
{"x":4.25, "y":0},
|
||||
{"x":5.5, "y":0},
|
||||
{"x":6.5, "y":0},
|
||||
{"x":7.5, "y":0},
|
||||
{"x":8.5, "y":0},
|
||||
{"x":9.75, "y":0},
|
||||
{"x":10.75, "y":0},
|
||||
{"x":11.75, "y":0},
|
||||
{"x":12.75, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
{"x":16.5, "y":0},
|
||||
{"x":17.5, "y":0},
|
||||
{"x":18.5, "y":0},
|
||||
|
||||
{"x":15.5, "y":1},
|
||||
{"x":16.5, "y":1},
|
||||
{"x":17.5, "y":1},
|
||||
{"x":18.5, "y":1},
|
||||
|
||||
{"x":0, "y":2},
|
||||
{"x":1, "y":2},
|
||||
{"x":2, "y":2},
|
||||
{"x":3, "y":2},
|
||||
{"x":4, "y":2},
|
||||
{"x":5, "y":2},
|
||||
{"x":6, "y":2},
|
||||
{"x":7, "y":2},
|
||||
{"x":8, "y":2},
|
||||
{"x":9, "y":2},
|
||||
{"x":10, "y":2},
|
||||
{"x":11, "y":2},
|
||||
{"x":12, "y":2},
|
||||
{"x":13, "y":2, "w":2},
|
||||
{"x":15.5, "y":2},
|
||||
{"x":16.5, "y":2},
|
||||
{"x":17.5, "y":2},
|
||||
{"x":18.5, "y":2},
|
||||
|
||||
{"x":0, "y":3, "w":1.5},
|
||||
{"x":1.5, "y":3},
|
||||
{"x":2.5, "y":3},
|
||||
{"x":3.5, "y":3},
|
||||
{"x":4.5, "y":3},
|
||||
{"x":5.5, "y":3},
|
||||
{"x":6.5, "y":3},
|
||||
{"x":7.5, "y":3},
|
||||
{"x":8.5, "y":3},
|
||||
{"x":9.5, "y":3},
|
||||
{"x":10.5, "y":3},
|
||||
{"x":11.5, "y":3},
|
||||
{"x":12.5, "y":3},
|
||||
{"x":13.5, "y":3, "w":1.5},
|
||||
{"x":15.5, "y":3},
|
||||
{"x":16.5, "y":3},
|
||||
{"x":17.5, "y":3},
|
||||
{"x":18.5, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.75},
|
||||
{"x":1.75, "y":4},
|
||||
{"x":2.75, "y":4},
|
||||
{"x":3.75, "y":4},
|
||||
{"x":4.75, "y":4},
|
||||
{"x":5.75, "y":4},
|
||||
{"x":6.75, "y":4},
|
||||
{"x":7.75, "y":4},
|
||||
{"x":8.75, "y":4},
|
||||
{"x":9.75, "y":4},
|
||||
{"x":10.75, "y":4},
|
||||
{"x":11.75, "y":4},
|
||||
{"x":12.75, "y":4, "w":2.25},
|
||||
{"x":15.5, "y":4},
|
||||
{"x":16.5, "y":4},
|
||||
{"x":17.5, "y":4},
|
||||
{"x":18.5, "y":4},
|
||||
|
||||
{"x":0, "y":5, "w":2.25},
|
||||
{"x":2.25, "y":5},
|
||||
{"x":3.25, "y":5},
|
||||
{"x":4.25, "y":5},
|
||||
{"x":5.25, "y":5},
|
||||
{"x":6.25, "y":5},
|
||||
{"x":7.25, "y":5},
|
||||
{"x":8.25, "y":5},
|
||||
{"x":9.25, "y":5},
|
||||
{"x":10.25, "y":5},
|
||||
{"x":11.25, "y":5},
|
||||
{"x":12.25, "y":5, "w":1.75},
|
||||
{"x":14.25, "y":5.25},
|
||||
{"x":15.5, "y":5},
|
||||
{"x":16.5, "y":5},
|
||||
{"x":17.5, "y":5},
|
||||
|
||||
{"x":0, "y":6},
|
||||
{"x":1, "y":6},
|
||||
{"x":2, "y":6},
|
||||
{"x":3, "y":6, "w":6},
|
||||
{"x":9, "y":6},
|
||||
{"x":10, "y":6},
|
||||
{"x":11, "y":6},
|
||||
{"x":12, "y":6},
|
||||
{"x":13.25, "y":6.25},
|
||||
{"x":14.25, "y":6.25},
|
||||
{"x":15.25, "y":6.25},
|
||||
{"x":16.5, "y":6},
|
||||
{"x":17.5, "y":6},
|
||||
{"x":18.5, "y":5, "h":2}
|
||||
]
|
||||
},
|
||||
"LAYOUT_1800_iso": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1.25, "y":0},
|
||||
{"x":2.25, "y":0},
|
||||
{"x":3.25, "y":0},
|
||||
{"x":4.25, "y":0},
|
||||
{"x":5.5, "y":0},
|
||||
{"x":6.5, "y":0},
|
||||
{"x":7.5, "y":0},
|
||||
{"x":8.5, "y":0},
|
||||
{"x":9.75, "y":0},
|
||||
{"x":10.75, "y":0},
|
||||
{"x":11.75, "y":0},
|
||||
{"x":12.75, "y":0},
|
||||
{"x":15.5, "y":0},
|
||||
{"x":16.5, "y":0},
|
||||
{"x":17.5, "y":0},
|
||||
{"x":18.5, "y":0},
|
||||
|
||||
{"x":15.5, "y":1},
|
||||
{"x":16.5, "y":1},
|
||||
{"x":17.5, "y":1},
|
||||
{"x":18.5, "y":1},
|
||||
|
||||
{"x":0, "y":2},
|
||||
{"x":1, "y":2},
|
||||
{"x":2, "y":2},
|
||||
{"x":3, "y":2},
|
||||
{"x":4, "y":2},
|
||||
{"x":5, "y":2},
|
||||
{"x":6, "y":2},
|
||||
{"x":7, "y":2},
|
||||
{"x":8, "y":2},
|
||||
{"x":9, "y":2},
|
||||
{"x":10, "y":2},
|
||||
{"x":11, "y":2},
|
||||
{"x":12, "y":2},
|
||||
{"x":13, "y":2, "w":2},
|
||||
{"x":15.5, "y":2},
|
||||
{"x":16.5, "y":2},
|
||||
{"x":17.5, "y":2},
|
||||
{"x":18.5, "y":2},
|
||||
|
||||
{"x":0, "y":3, "w":1.5},
|
||||
{"x":1.5, "y":3},
|
||||
{"x":2.5, "y":3},
|
||||
{"x":3.5, "y":3},
|
||||
{"x":4.5, "y":3},
|
||||
{"x":5.5, "y":3},
|
||||
{"x":6.5, "y":3},
|
||||
{"x":7.5, "y":3},
|
||||
{"x":8.5, "y":3},
|
||||
{"x":9.5, "y":3},
|
||||
{"x":10.5, "y":3},
|
||||
{"x":11.5, "y":3},
|
||||
{"x":12.5, "y":3},
|
||||
{"x":15.5, "y":3},
|
||||
{"x":16.5, "y":3},
|
||||
{"x":17.5, "y":3},
|
||||
{"x":18.5, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.75},
|
||||
{"x":1.75, "y":4},
|
||||
{"x":2.75, "y":4},
|
||||
{"x":3.75, "y":4},
|
||||
{"x":4.75, "y":4},
|
||||
{"x":5.75, "y":4},
|
||||
{"x":6.75, "y":4},
|
||||
{"x":7.75, "y":4},
|
||||
{"x":8.75, "y":4},
|
||||
{"x":9.75, "y":4},
|
||||
{"x":10.75, "y":4},
|
||||
{"x":11.75, "y":4},
|
||||
{"x":12.75, "y":4},
|
||||
{"x":13.75, "y":3, "w":1.25, "h":2},
|
||||
{"x":15.5, "y":4},
|
||||
{"x":16.5, "y":4},
|
||||
{"x":17.5, "y":4},
|
||||
{"x":18.5, "y":4},
|
||||
|
||||
{"x":0, "y":5, "w":1.25},
|
||||
{"x":1.25, "y":5},
|
||||
{"x":2.25, "y":5},
|
||||
{"x":3.25, "y":5},
|
||||
{"x":4.25, "y":5},
|
||||
{"x":5.25, "y":5},
|
||||
{"x":6.25, "y":5},
|
||||
{"x":7.25, "y":5},
|
||||
{"x":8.25, "y":5},
|
||||
{"x":9.25, "y":5},
|
||||
{"x":10.25, "y":5},
|
||||
{"x":11.25, "y":5},
|
||||
{"x":12.25, "y":5, "w":1.75},
|
||||
{"x":14.25, "y":5.25},
|
||||
{"x":15.5, "y":5},
|
||||
{"x":16.5, "y":5},
|
||||
{"x":17.5, "y":5},
|
||||
|
||||
{"x":0, "y":6},
|
||||
{"x":1, "y":6},
|
||||
{"x":2, "y":6},
|
||||
{"x":3, "y":6, "w":6},
|
||||
{"x":9, "y":6},
|
||||
{"x":10, "y":6},
|
||||
{"x":11, "y":6},
|
||||
{"x":12, "y":6},
|
||||
{"x":13.25, "y":6.25},
|
||||
{"x":14.25, "y":6.25},
|
||||
{"x":15.25, "y":6.25},
|
||||
{"x":16.5, "y":6},
|
||||
{"x":17.5, "y":6},
|
||||
{"x":18.5, "y":5, "h":2}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
28
keyboards/evyd13/gh80_1800/keymaps/default/keymap.c
Normal file
28
keyboards/evyd13/gh80_1800/keymaps/default/keymap.c
Normal file
@@ -0,0 +1,28 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR,
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PPLS,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT
|
||||
),
|
||||
};
|
||||
1
keyboards/evyd13/gh80_1800/keymaps/default/readme.md
Normal file
1
keyboards/evyd13/gh80_1800/keymaps/default/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
This is the default keymap for the GH80-1800.
|
||||
55
keyboards/evyd13/gh80_1800/keymaps/via/keymap.c
Normal file
55
keyboards/evyd13/gh80_1800/keymaps/via/keymap.c
Normal file
@@ -0,0 +1,55 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR,
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PPLS,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT
|
||||
),
|
||||
[1] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[2] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[3] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
||||
2
keyboards/evyd13/gh80_1800/keymaps/via/rules.mk
Normal file
2
keyboards/evyd13/gh80_1800/keymaps/via/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
||||
13
keyboards/evyd13/gh80_1800/readme.md
Normal file
13
keyboards/evyd13/gh80_1800/readme.md
Normal file
@@ -0,0 +1,13 @@
|
||||
# GH80-1800
|
||||
|
||||
## Support
|
||||
* Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
|
||||
* Hardware Supported: GH80-1800
|
||||
* Hardware Availability: [Open source on GitHub](https://github.com/evyd13/gh80-series/tree/master/GH80-1800)
|
||||
|
||||
## Build
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make evyd13/gh80_1800:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
21
keyboards/evyd13/gh80_1800/rules.mk
Normal file
21
keyboards/evyd13/gh80_1800/rules.mk
Normal file
@@ -0,0 +1,21 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
143
keyboards/evyd13/gh80_3700/config.h
Normal file
143
keyboards/evyd13/gh80_3700/config.h
Normal file
@@ -0,0 +1,143 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0x633A
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Evyd13
|
||||
#define PRODUCT GH80 3700
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS {B3,C7,C6,B6,B5,B4}
|
||||
#define MATRIX_COL_PINS {B0,D7,D6,D4}
|
||||
#define UNUSED_PINS {}
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
// #define RGB_DI_PIN B2
|
||||
// #ifdef RGB_DI_PIN
|
||||
// #define RGBLED_NUM 8
|
||||
// #define RGBLIGHT_HUE_STEP 8
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
// #define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
// /*== customize breathing effect ==*/
|
||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
// /*==== use exp() and sin() ====*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
// #endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
// Define rotary encoder
|
||||
#define ENCODERS_PAD_A { F1 }
|
||||
#define ENCODERS_PAD_B { F4 }
|
||||
46
keyboards/evyd13/gh80_3700/gh80_3700.c
Normal file
46
keyboards/evyd13/gh80_3700/gh80_3700.c
Normal file
@@ -0,0 +1,46 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "gh80_3700.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
setPinOutput(E6);
|
||||
setPinOutput(B1);
|
||||
setPinOutput(D0);
|
||||
setPinOutput(D1);
|
||||
setPinOutput(F0);
|
||||
|
||||
writePinHigh(E6);
|
||||
writePinHigh(B1);
|
||||
writePinHigh(D0);
|
||||
writePinHigh(D1);
|
||||
writePinHigh(F0);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if(led_update_user(led_state)) {
|
||||
writePin(E6, !led_state.num_lock);
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
63
keyboards/evyd13/gh80_3700/gh80_3700.h
Normal file
63
keyboards/evyd13/gh80_3700/gh80_3700.h
Normal file
@@ -0,0 +1,63 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT_all LAYOUT_ortho_6x4
|
||||
|
||||
#define LAYOUT_ortho_6x4( \
|
||||
k00, k01, k02, k03, \
|
||||
k10, k11, k12, k13, \
|
||||
k20, k21, k22, k23, \
|
||||
k30, k31, k32, k33, \
|
||||
k40, k41, k42, k43, \
|
||||
k50, k51, k52, k53 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03 }, \
|
||||
{ k10, k11, k12, k13 }, \
|
||||
{ k20, k21, k22, k23 }, \
|
||||
{ k30, k31, k32, k33 }, \
|
||||
{ k40, k41, k42, k43 }, \
|
||||
{ k50, k51, k52, k53 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_numpad_6x4( \
|
||||
k00, k01, k02, k03, \
|
||||
k10, k11, k12, k13, \
|
||||
k20, k21, k22, \
|
||||
k30, k31, k32, k33, \
|
||||
k40, k41, k42, \
|
||||
k50, k52, k53 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03 }, \
|
||||
{ k10, k11, k12, k13 }, \
|
||||
{ k20, k21, k22, KC_NO }, \
|
||||
{ k30, k31, k32, k33 }, \
|
||||
{ k40, k41, k42, KC_NO }, \
|
||||
{ k50, KC_NO, k52, k53 } \
|
||||
}
|
||||
72
keyboards/evyd13/gh80_3700/info.json
Normal file
72
keyboards/evyd13/gh80_3700/info.json
Normal file
@@ -0,0 +1,72 @@
|
||||
{
|
||||
"keyboard_name": "GH80-3700",
|
||||
"url": "https://github.com/evyd13/gh80-series/tree/master/GH80-3700",
|
||||
"maintainer": "evyd13",
|
||||
"width": 4,
|
||||
"height": 7,
|
||||
"layouts": {
|
||||
"LAYOUT_ortho_6x4": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
|
||||
{"x":0, "y":2},
|
||||
{"x":1, "y":2},
|
||||
{"x":2, "y":2},
|
||||
{"x":3, "y":2},
|
||||
|
||||
{"x":0, "y":3},
|
||||
{"x":1, "y":3},
|
||||
{"x":2, "y":3},
|
||||
{"x":3, "y":3},
|
||||
|
||||
{"x":0, "y":4},
|
||||
{"x":1, "y":4},
|
||||
{"x":2, "y":4},
|
||||
{"x":3, "y":4},
|
||||
|
||||
{"x":0, "y":5},
|
||||
{"x":1, "y":5},
|
||||
{"x":2, "y":5},
|
||||
{"x":3, "y":5},
|
||||
|
||||
{"x":0, "y":6},
|
||||
{"x":1, "y":6},
|
||||
{"x":2, "y":6},
|
||||
{"x":3, "y":6}
|
||||
]
|
||||
},
|
||||
"LAYOUT_numpad_6x4": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
|
||||
{"x":0, "y":2},
|
||||
{"x":1, "y":2},
|
||||
{"x":2, "y":2},
|
||||
{"x":3, "y":2},
|
||||
|
||||
{"x":0, "y":3},
|
||||
{"x":1, "y":3},
|
||||
{"x":2, "y":3},
|
||||
|
||||
{"x":0, "y":4},
|
||||
{"x":1, "y":4},
|
||||
{"x":2, "y":4},
|
||||
{"x":3, "y":3, "h":2},
|
||||
|
||||
{"x":0, "y":5},
|
||||
{"x":1, "y":5},
|
||||
{"x":2, "y":5},
|
||||
|
||||
{"x":0, "y":6, "w":2},
|
||||
{"x":2, "y":6},
|
||||
{"x":3, "y":5, "h":2}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
26
keyboards/evyd13/gh80_3700/keymaps/default/keymap.c
Normal file
26
keyboards/evyd13/gh80_3700/keymaps/default/keymap.c
Normal file
@@ -0,0 +1,26 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_ortho_6x4(
|
||||
KC_ESC, KC_TAB, KC_EQL, KC_BSPC,
|
||||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_P0, KC_P0, KC_PDOT, KC_PENT),
|
||||
};
|
||||
1
keyboards/evyd13/gh80_3700/keymaps/default/readme.md
Normal file
1
keyboards/evyd13/gh80_3700/keymaps/default/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
This is the default keymap for the GH80-3700.
|
||||
69
keyboards/evyd13/gh80_3700/keymaps/ps2/config.h
Normal file
69
keyboards/evyd13/gh80_3700/keymaps/ps2/config.h
Normal file
@@ -0,0 +1,69 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#ifdef PS2_USE_USART
|
||||
#define PS2_CLOCK_PORT PORTD
|
||||
#define PS2_CLOCK_PIN PIND
|
||||
#define PS2_CLOCK_DDR DDRD
|
||||
#define PS2_CLOCK_BIT 5
|
||||
#define PS2_DATA_PORT PORTD
|
||||
#define PS2_DATA_PIN PIND
|
||||
#define PS2_DATA_DDR DDRD
|
||||
#define PS2_DATA_BIT 2
|
||||
|
||||
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
|
||||
/* set DDR of CLOCK as input to be slave */
|
||||
#define PS2_USART_INIT() do { \
|
||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
|
||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
|
||||
UCSR1C = ((1 << UMSEL10) | \
|
||||
(3 << UPM10) | \
|
||||
(0 << USBS1) | \
|
||||
(3 << UCSZ10) | \
|
||||
(0 << UCPOL1)); \
|
||||
UCSR1A = 0; \
|
||||
UBRR1H = 0; \
|
||||
UBRR1L = 0; \
|
||||
} while (0)
|
||||
#define PS2_USART_RX_INT_ON() do { \
|
||||
UCSR1B = ((1 << RXCIE1) | \
|
||||
(1 << RXEN1)); \
|
||||
} while (0)
|
||||
#define PS2_USART_RX_POLL_ON() do { \
|
||||
UCSR1B = (1 << RXEN1); \
|
||||
} while (0)
|
||||
#define PS2_USART_OFF() do { \
|
||||
UCSR1C = 0; \
|
||||
UCSR1B &= ~((1 << RXEN1) | \
|
||||
(1 << TXEN1)); \
|
||||
} while (0)
|
||||
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
|
||||
#define PS2_USART_RX_DATA UDR1
|
||||
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
|
||||
#define PS2_USART_RX_VECT USART1_RX_vect
|
||||
#define PS2_MOUSE_ENABLE_SCROLLING
|
||||
#define PS2_MOUSE_INIT_DELAY 1000
|
||||
#define PS2_MOUSE_BTN_LEFT 0
|
||||
#define PS2_MOUSE_BTN_RIGHT 1
|
||||
#define PS2_MOUSE_BTN_MIDDLE 2
|
||||
#define PS2_MOUSE_X_MULTIPLIER 2
|
||||
#define PS2_MOUSE_Y_MULTIPLIER 2
|
||||
#define PS2_MOUSE_V_MULTIPLIER 1
|
||||
#define PS2_MOUSE_SCROLL_BTN_MASK 0
|
||||
#define PS2_MOUSE_USE_REMOTE_MODE
|
||||
#endif
|
||||
26
keyboards/evyd13/gh80_3700/keymaps/ps2/keymap.c
Normal file
26
keyboards/evyd13/gh80_3700/keymaps/ps2/keymap.c
Normal file
@@ -0,0 +1,26 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_ortho_6x4(
|
||||
KC_ESC, KC_TAB, KC_EQL, KC_BSPC,
|
||||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_P0, KC_P0, KC_PDOT, KC_PENT),
|
||||
};
|
||||
1
keyboards/evyd13/gh80_3700/keymaps/ps2/readme.md
Normal file
1
keyboards/evyd13/gh80_3700/keymaps/ps2/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
This is a keymap for the GH80-3700 with PS/2 mouse functionality enabled.
|
||||
5
keyboards/evyd13/gh80_3700/keymaps/ps2/rules.mk
Normal file
5
keyboards/evyd13/gh80_3700/keymaps/ps2/rules.mk
Normal file
@@ -0,0 +1,5 @@
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
PS2_MOUSE_ENABLE = yes
|
||||
PS2_USE_USART = yes
|
||||
21
keyboards/evyd13/gh80_3700/keymaps/rgb/config.h
Normal file
21
keyboards/evyd13/gh80_3700/keymaps/rgb/config.h
Normal file
@@ -0,0 +1,21 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define RGB_DI_PIN B2
|
||||
#define RGBLED_NUM 8
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
26
keyboards/evyd13/gh80_3700/keymaps/rgb/keymap.c
Normal file
26
keyboards/evyd13/gh80_3700/keymaps/rgb/keymap.c
Normal file
@@ -0,0 +1,26 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_ortho_6x4(
|
||||
KC_ESC, KC_TAB, KC_EQL, KC_BSPC,
|
||||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_P0, KC_P0, KC_PDOT, KC_PENT),
|
||||
};
|
||||
1
keyboards/evyd13/gh80_3700/keymaps/rgb/readme.md
Normal file
1
keyboards/evyd13/gh80_3700/keymaps/rgb/readme.md
Normal file
@@ -0,0 +1 @@
|
||||
This is a keymap for the GH80-3700 with RGB enabled.
|
||||
4
keyboards/evyd13/gh80_3700/keymaps/rgb/rules.mk
Normal file
4
keyboards/evyd13/gh80_3700/keymaps/rgb/rules.mk
Normal file
@@ -0,0 +1,4 @@
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
RGBLIGHT_ENABLE = yes
|
||||
50
keyboards/evyd13/gh80_3700/keymaps/via/keymap.c
Normal file
50
keyboards/evyd13/gh80_3700/keymaps/via/keymap.c
Normal file
@@ -0,0 +1,50 @@
|
||||
/* Copyright 2020 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_ortho_6x4(
|
||||
KC_ESC, KC_TAB, KC_EQL, KC_BSPC,
|
||||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_P0, KC_P0, KC_PDOT, KC_PENT),
|
||||
|
||||
[1] = LAYOUT_ortho_6x4(
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______),
|
||||
|
||||
[2] = LAYOUT_ortho_6x4(
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______),
|
||||
|
||||
[3] = LAYOUT_ortho_6x4(
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______,
|
||||
_______, _______, _______, _______),
|
||||
};
|
||||
2
keyboards/evyd13/gh80_3700/keymaps/via/rules.mk
Normal file
2
keyboards/evyd13/gh80_3700/keymaps/via/rules.mk
Normal file
@@ -0,0 +1,2 @@
|
||||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
||||
15
keyboards/evyd13/gh80_3700/readme.md
Normal file
15
keyboards/evyd13/gh80_3700/readme.md
Normal file
@@ -0,0 +1,15 @@
|
||||
# GH80-3700
|
||||
|
||||
|
||||
|
||||
## Support
|
||||
* Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
|
||||
* Hardware Supported: GH80-3700 PCB
|
||||
* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/gh80-3700-numpad-pcb/)
|
||||
|
||||
## Build
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make evyd13/gh80_3700:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
24
keyboards/evyd13/gh80_3700/rules.mk
Normal file
24
keyboards/evyd13/gh80_3700/rules.mk
Normal file
@@ -0,0 +1,24 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
ENCODER_ENABLE = yes # Enable support for rotary encoders
|
||||
|
||||
LAYOUTS = numpad_6x4 ortho_6x4
|
||||
224
keyboards/evyd13/minitomic/config.h
Normal file
224
keyboards/evyd13/minitomic/config.h
Normal file
@@ -0,0 +1,224 @@
|
||||
/* Copyright 2019 Evy Dekkers
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0x0145
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Evyd13
|
||||
#define PRODUCT Minitomic
|
||||
#define DESCRIPTION A 45% staggered keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 13
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS {B1,B3,D4,D6}
|
||||
#define MATRIX_COL_PINS {C6,B6,B5,B4,D7,F0,F1,F4,F5,F6,F7,B7,E6}
|
||||
#define UNUSED_PINS {B2,D0,D1,D2,D3,D5}
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
// #define RGB_DI_PIN E2
|
||||
// #ifdef RGB_DI_PIN
|
||||
// #define RGBLED_NUM 16
|
||||
// #define RGBLIGHT_HUE_STEP 8
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
// #define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
// /*== customize breathing effect ==*/
|
||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
// /*==== use exp() and sin() ====*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
// #endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
||||
#define QMK_ESC_OUTPUT C6 // usually COL
|
||||
#define QMK_ESC_INPUT B1 // usually ROW
|
||||
#define QMK_LED C7
|
||||
15
keyboards/evyd13/minitomic/info.json
Normal file
15
keyboards/evyd13/minitomic/info.json
Normal file
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"keyboard_name": "Minitomic",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 13,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT_split_space": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3, "w":1.25}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3, "w":1.75}, {"x":6.25, "y":3, "w":2}, {"x":8.25, "y":3}, {"x":9.25, "y":3, "w":1.25}, {"x":10.5, "y":3, "w":1.25}, {"x":11.75, "y":3, "w":1.25}]
|
||||
},
|
||||
"LAYOUT_full_space": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3, "w":6.25}, {"x":9.5, "y":3}, {"x":10.5, "y":3, "w":1.25}, {"x":11.75, "y":3, "w":1.25}]
|
||||
}
|
||||
}
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user