Merge remote-tracking branch 'origin/master' into develop

keyboards/kbdfans/baguette66/rgb/readme.md

@@ -13,7 +13,7 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 
 Make example for this keyboard (after setting up your build environment):

keyboards/kbdfans/baguette66/soldered/readme.md

@@ -13,7 +13,7 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 
 Make example for this keyboard (after setting up your build environment):

keyboards/kbdfans/boop65/rgb/readme.md

@@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/bounce/75/hotswap/readme.md

@@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/bounce/75/soldered/readme.md

@@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/bounce/pad/readme.md

@@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd19x/readme.md

@@ -25,6 +25,6 @@ Flashing example for this keyboard:
 To reset the board into bootloader mode, do one of the following:
 
 * **Bootmagic reset**: Hold the `Esc` key while connecting the USB cable (also erases persistent settings)
-* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Backspace` by default)
+* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Backspace` by default)
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md

@@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 ## Bootloader Enter the bootloader in 3 ways:
 * **Bootmagic reset**: Hold down esc in the keyboard then replug
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET`
+* **Keycode in layout**: Press the key mapped to `QK_BOOT`

keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md

@@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 ## Bootloader Enter the bootloader in 3 ways:
 * **Bootmagic reset**: Hold down esc in the keyboard then replug
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET`
+* **Keycode in layout**: Press the key mapped to `QK_BOOT`

keyboards/kbdfans/kbd75hs/readme.md

@@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd75rgb/readme.md

@@ -13,7 +13,7 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 
 Make example for this keyboard (after setting up your build environment):

keyboards/kbdfans/odin/rgb/readme.md

@@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**:press and hold the button on the back of the PCB, then plugin to PC
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/odin/soldered/readme.md

@@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**:press and hold the button on the back of the PCB, then plugin to PC
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/phaseone/readme.md

@@ -12,7 +12,7 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/tiger80/readme.md

@@ -16,6 +16,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).