[Keymap] Drashna updates for 0.19 (#19175)

* Fix up bastardkb boards since blackpill support is officially added. * Check for blackpill version, not elite c. * Add checks in chibiOS config since multiple ARM controllers supported. * Rework rules.mk for keymaps to better handle arm vs avr support * Start moving away from `matrix_*_*` functions. * `housekeeping_task_*` instead of `matrix_scan_*` * `keyboard_(pre|post)_init_*` instead of `matrix_init_*` * Add ℂℴmⅈℂ unicode input method. * Clean up unicode code to be more compact and flexible. * Remove/move Pro Micro LED commands to userspace and better filter them * Fixup OLED code * Use newer quantum keycode functions/preprocessors rather than manual bit manipulation * Make unicode mode render much more compact/simple. * Make qmk secrets more self contained * Remove custom implementation of split watchdog
2022-11-29 11:43:42 -08:00
parent 8a8000b4ec
commit 4a87af0e9a
49 changed files with 622 additions and 560 deletions
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h
@@ -18,87 +18,90 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #pragma once

-#undef PRODUCT
-#define PRODUCT "Charybdis Nano (Blackpill)"
+#ifdef KEYBOARD_bastardkb_charybdis_3x5_blackpill

-#undef MATRIX_ROW_PINS
-#define MATRIX_ROW_PINS \
-    { B12, B13, B14, B15 }
-#undef MATRIX_COL_PINS
-#define MATRIX_COL_PINS \
-    { A15, B3, B4, B5, B6 }
+#    undef MATRIX_ROW_PINS
+#    define MATRIX_ROW_PINS \
+        { B12, B13, B14, B15 }
+#    undef MATRIX_COL_PINS
+#    define MATRIX_COL_PINS \
+        { A15, B3, B4, B5, B6 }

+#    undef MATRIX_ROW_PINS_RIGHT
+#    define MATRIX_ROW_PINS_RIGHT \
+        { B12, B13, B14, B15 }
+#    undef MATRIX_COL_PINS_RIGHT
+#    define MATRIX_COL_PINS_RIGHT \
+        { A15, B3, B4, B5, B6 }

-#undef MATRIX_ROW_PINS_RIGHT
-#define MATRIX_ROW_PINS_RIGHT \
-    { B12, B13, B14, B15 }
-#undef MATRIX_COL_PINS_RIGHT
-#define MATRIX_COL_PINS_RIGHT \
-    { A15, B3, B4, B5, B6 }
-
-#define USB_VBUS_PIN        B10
-#define SPLIT_HAND_PIN      C14  // high = left, low = right
+#    define USB_VBUS_PIN B10
+#    undef SPLIT_HAND_PIN
+#    define SPLIT_HAND_PIN C14 // high = left, low = right

 // WS2812 RGB LED strip input and number of LEDs
-#undef RGB_DI_PIN
-#define RGB_DI_PIN          A1
-#undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
-#define WS2812_PWM_DRIVER   PWMD2  // default: PWMD2
-#define WS2812_PWM_CHANNEL  2      // default: 2
-#define WS2812_PWM_PAL_MODE 1      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-#define WS2812_EXTERNAL_PULLUP
+#    undef RGB_DI_PIN
+#    define RGB_DI_PIN A1
+#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
+#    define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
+#    define WS2812_PWM_CHANNEL 2    // default: 2
+#    define WS2812_PWM_PAL_MODE 1   // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+#    define WS2812_EXTERNAL_PULLUP
 //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
-#define WS2812_DMA_STREAM   STM32_DMA1_STREAM7  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#define WS2812_DMA_CHANNEL  3                   // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#define WS2812_PWM_TARGET_PERIOD 800000
+#    undef WS2812_DMA_STREAM
+#    define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_DMA_CHANNEL 3                 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_PWM_TARGET_PERIOD 800000

-#define DEBUG_LED_PIN     C13
+#    define DEBUG_LED_PIN C13

 /* Audio config */
-#define AUDIO_PIN          B1
-#define AUDIO_PWM_DRIVER   PWMD3
-#define AUDIO_PWM_CHANNEL  4
-#define AUDIO_PWM_PAL_MODE 2
+#    define AUDIO_PIN B1
+#    define AUDIO_PWM_DRIVER PWMD3
+#    define AUDIO_PWM_CHANNEL 4
+#    define AUDIO_PWM_PAL_MODE 2

 /* serial.c configuration for split keyboard */
-#undef SOFT_SERIAL_PIN
-#define SERIAL_USART_FULL_DUPLEX  // Enable full duplex operation mode.
-#define SERIAL_USART_TX_PIN      A2
-#define SERIAL_USART_RX_PIN      A3
-#define SERIAL_USART_DRIVER      SD2
-#define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-#define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-#define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100
-#define SERIAL_USART_SPEED       921600
+#    undef SOFT_SERIAL_PIN
+#    define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
+#    undef SERIAL_USART_TX_PIN
+#    define SERIAL_USART_TX_PIN A2
+#    undef SERIAL_USART_RX_PIN
+#    define SERIAL_USART_RX_PIN A3
+#    define SERIAL_USART_DRIVER SD2
+#    define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#    define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#    define SERIAL_USART_TIMEOUT 100   // USART driver timeout. default 100
+#    define SERIAL_USART_SPEED 921600
 // #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master
 // To use the highest possible baudrate (3.75Mbit/s) uncomment the following
 // line, this can result in dropped communications so lower the speed if there
 // are many timeouts.
 // #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4)

-#define CRC8_USE_TABLE
-#define CRC8_OPTIMIZE_SPEED
+#    define CRC8_USE_TABLE
+#    define CRC8_OPTIMIZE_SPEED

 /* spi config for eeprom and pmw3360 sensor */
-#define SPI_DRIVER                           SPID1
-#define SPI_SCK_PIN                          A5
-#define SPI_SCK_PAL_MODE                     5
-#define SPI_MOSI_PIN                         A7
-#define SPI_MOSI_PAL_MODE                    5
-#define SPI_MISO_PIN                         A6
-#define SPI_MISO_PAL_MODE                    5
+#    define SPI_DRIVER SPID1
+#    define SPI_SCK_PIN A5
+#    define SPI_SCK_PAL_MODE 5
+#    define SPI_MOSI_PIN A7
+#    define SPI_MOSI_PAL_MODE 5
+#    define SPI_MISO_PIN A6
+#    define SPI_MISO_PAL_MODE 5

 /* eeprom config */
-#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
-#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    64
+#    define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
+#    define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
 // #define EXTERNAL_EEPROM_BYTE_COUNT           8196
 // #define EXTERNAL_EEPROM_PAGE_SIZE            32
 // #define EXTERNAL_EEPROM_ADDRESS_SIZE         2

 /* pmw3360 config  */
-#undef PMW33XX_CS_PIN
-#define PMW33XX_CS_PIN                       B0
+#    undef PMW33XX_CS_PIN
+#    define PMW33XX_CS_PIN B0
+#endif

 #define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200
 #define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h
@@ -15,11 +15,13 @@
 */
 #pragma once

-#define HAL_USE_PWM     TRUE
-#define HAL_USE_SERIAL  TRUE
-#define HAL_USE_I2C     TRUE
-#define HAL_USE_SPI     TRUE
-#define SPI_USE_WAIT    TRUE
-#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill)
+#    define HAL_USE_PWM TRUE
+#    define HAL_USE_SERIAL TRUE
+#    define HAL_USE_I2C TRUE
+#    define HAL_USE_SPI TRUE
+#    define SPI_USE_WAIT TRUE
+#    define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#endif

 #include_next <halconf.h>
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c
@@ -83,24 +83,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    ),
 };

-void matrix_init_keyemap(void) { setPinInputHigh(A0); }
+#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill)
+void keyboard_pre_init_keymap(void) {
+    setPinInputHigh(A0);
+}

-void matrix_scan_keymap(void) {
+void housekeeping_task_keymap(void) {
    if (!readPin(A0)) {
        reset_keyboard();
    }
 }

-#ifdef USB_VBUS_PIN
+#    ifdef USB_VBUS_PIN
 bool usb_vbus_state(void) {
    setPinInputLow(USB_VBUS_PIN);
    wait_us(5);
    return readPin(USB_VBUS_PIN);
 }
-#endif
+#    endif

 void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
    for (int32_t i = 0; i < 40; i++) {
        __asm__ volatile("nop" ::: "memory");
    }
 }
+#endif
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h
@@ -18,25 +18,27 @@

 #include_next "mcuconf.h"

-#undef STM32_I2C_USE_I2C1
-#define STM32_I2C_USE_I2C1 TRUE
+#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill)
+#    undef STM32_I2C_USE_I2C1
+#    define STM32_I2C_USE_I2C1 TRUE

 // #undef STM32_I2C_I2C1_RX_DMA_STREAM
 // #define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#undef STM32_I2C_I2C1_TX_DMA_STREAM
-#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#    undef STM32_I2C_I2C1_TX_DMA_STREAM
+#    define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)

-#undef STM32_PWM_USE_TIM2
-#define STM32_PWM_USE_TIM2 TRUE
+#    undef STM32_PWM_USE_TIM2
+#    define STM32_PWM_USE_TIM2 TRUE

-#undef STM32_PWM_USE_TIM3
-#define STM32_PWM_USE_TIM3 TRUE
+#    undef STM32_PWM_USE_TIM3
+#    define STM32_PWM_USE_TIM3 TRUE

-#undef STM32_SPI_USE_SPI1
-#define STM32_SPI_USE_SPI1           TRUE
+#    undef STM32_SPI_USE_SPI1
+#    define STM32_SPI_USE_SPI1 TRUE

-#undef STM32_SERIAL_USE_USART2
-#define STM32_SERIAL_USE_USART2 TRUE
+#    undef STM32_SERIAL_USE_USART2
+#    define STM32_SERIAL_USE_USART2 TRUE

-#undef STM32_ST_USE_TIMER
-#define STM32_ST_USE_TIMER 5
+#    undef STM32_ST_USE_TIMER
+#    define STM32_ST_USE_TIMER 5
+#endif
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk
@@ -1,28 +1,45 @@
-# MCU name
-MCU = STM32F411
-BOARD = BLACKPILL_STM32_F411
+RGB_MATRIX_ENABLE = no
+CUSTOM_UNICODE_ENABLE = no
+CUSTOM_POINTING_DEVICE = no
+CUSTOM_SPLIT_TRANSPORT_SYNC = no

-# Bootloader selection
-# BOOTLOADER = stm32-dfu
-BOOTLOADER := tinyuf2

-LTO_ENABLE := no
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/blackpill)
+    # Bootloader selection
+    BOOTLOADER := tinyuf2

-BOOTMAGIC_ENABLE = yes     # Enable Bootmagic Lite
-KEYBOARD_SHARED_EP = yes
-MOUSE_SHARED_EP = yes
+    LTO_ENABLE := no

-EEPROM_DRIVER = spi
-WS2812_DRIVER = pwm
-SERIAL_DRIVER = usart
-AUDIO_DRIVER = pwm_hardware
+    AUDIO_SUPPORTED = yes
+    AUDIO_ENABLE = yes
+    AUDIO_DRIVER = pwm_hardware

-AUDIO_SUPPORTED = yes
-AUDIO_ENABLE = yes
-MOUSEKEY_ENABLE = yes
-NKRO_ENABLE = yes
-CONSOLE_ENABLE = yes
+    OVERLOAD_FEATURES = yes
+endif

-AUTOCORRECT_ENABLE = yes
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/v2/stemcell)
+    OVERLOAD_FEATURES = yes
+endif
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/v2/splinky)
+    OVERLOAD_FEATURES = yes
+endif

-DEBOUNCE_TYPE = asym_eager_defer_pk
+
+ifeq ($(strip $(OVERLOAD_FEATURES)), yes)
+    BOOTMAGIC_ENABLE = yes     # Enable Bootmagic Lite
+    KEYBOARD_SHARED_EP = yes
+    MOUSE_SHARED_EP = yes
+
+    MOUSEKEY_ENABLE = yes
+    NKRO_ENABLE = yes
+    CONSOLE_ENABLE = yes
+    RGB_MATRIX_ENABLE = yes
+
+    AUTOCORRECT_ENABLE = yes
+
+    CUSTOM_UNICODE_ENABLE = yes
+    CUSTOM_POINTING_DEVICE = yes
+    CUSTOM_SPLIT_TRANSPORT_SYNC = yes
+
+    DEBOUNCE_TYPE = asym_eager_defer_pk
+endif