[Keyboard] Tractyl Manuform - configuration updates (#14314)

* [Keyboard] Tractyl Manuform - configuration updates

* Update readmes

* Add more details

* Fix issues with encoder pins

* Additional fixes for pin config

* Fix up some comments

keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h

@@ -24,7 +24,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS \
     { A15, B3, B4, B5, B6, B7 }
 #define MATRIX_ROW_PINS \
-    { B12, B13, B14, B15, A8, A9 }
+    { B12, B13, B14, B15, A8, A10 }
+
+#define UNUSED_PINS \
+    { C15 }
+// B2 used for BOOT1, has internal pull down?
+// A9 has internal pull-down
+// A11 and A12 are used for USB sense.  DO NOT USE.
 
 #define DIODE_DIRECTION     COL2ROW
 
@@ -45,12 +51,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_SPLIT \
     { 10, 10 }
 
-#define DEBUG_LED_PIN     C13
+#define DEBUG_LED_PIN      C13
 
-#define AUDIO_PIN         A0
-#define AUDIO_PWM_DRIVER  PWMD5
-#define AUDIO_PWM_CHANNEL 1
-#define AUDIO_STATE_TIMER GPTD4
+/* Audio config */
+#define AUDIO_PIN          B1
+#define AUDIO_PWM_DRIVER   PWMD3
+#define AUDIO_PWM_CHANNEL  4
+#define AUDIO_PWM_PAL_MODE 2
+#define AUDIO_STATE_TIMER  GPTD4
 
 /* serial.c configuration for split keyboard */
 #define SERIAL_USART_FULL_DUPLEX  // Enable full duplex operation mode.
@@ -60,10 +68,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 #define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 #define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100
-#undef SOFT_SERIAL_PIN
-
-// #define EE_HANDS
 
+/* i2c config for oleds */
 #define I2C_DRIVER        I2CD1
 #define I2C1_SCL_BANK     GPIOB
 #define I2C1_SDA_BANK     GPIOB
@@ -73,11 +79,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C1_SDA_PAL_MODE 4
 #define I2C1_CLOCK_SPEED  400000
 
+/* encoder config */
 #define ENCODERS_PAD_A \
-    { B1 }
+    { A13 }
 #define ENCODERS_PAD_B \
-    { B2 }
+    { A14 }
 
+/* spi config for eeprom and pmw3360 sensor */
 #define SPI_DRIVER                           SPID1
 #define SPI_SCK_PIN                          A5
 #define SPI_SCK_PAL_MODE                     5
@@ -86,6 +94,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SPI_MISO_PIN                         A6
 #define SPI_MISO_PAL_MODE                    5
 
+/* eeprom config */
 #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
 #define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    8
 // #define EXTERNAL_EEPROM_BYTE_COUNT           8196
@@ -93,6 +102,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define EXTERNAL_EEPROM_ADDRESS_SIZE         2
 // #define DEBUG_EEPROM_OUTPUT
 
+/* pmw3360 config  */
 #define PMW3360_CS_PIN                       B0
 #define PMW3360_SPI_MODE                     3
 #define PMW3360_SPI_DIVISOR                  4

keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h

@@ -15,7 +15,6 @@
  */
 #pragma once
 
-// #define HAL_USE_DAC TRUE
 #define HAL_USE_PWM    TRUE
 #define HAL_USE_SERIAL TRUE
 #define HAL_USE_I2C    TRUE

keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h

@@ -24,11 +24,14 @@
 #undef STM32_PWM_USE_TIM5
 #define STM32_PWM_USE_TIM5 TRUE
 
-#undef STM32_GPT_USE_TIM4
-#define STM32_GPT_USE_TIM4 TRUE
+#undef STM32_PWM_USE_TIM3
+#define STM32_PWM_USE_TIM3 TRUE
 
 #undef STM32_SPI_USE_SPI1
 #define STM32_SPI_USE_SPI1 TRUE
 
 #undef STM32_SERIAL_USE_USART2
 #define STM32_SERIAL_USE_USART2 TRUE
+
+#undef STM32_GPT_USE_TIM4
+#define STM32_GPT_USE_TIM4 TRUE

keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md

@@ -0,0 +1,24 @@
+# Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball
+
+* VBUS mod, using PB10
+* Split Hand Pin, using PC14
+* Full Duplex Serial/USART using PA3 and PA4 on USART2
+* PWM Audio using PB1 and TIM3 and GPT on TIM4
+* PWM RGB using PA1 TIM5
+* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin
+* 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
+* Encoder using PA10 and PA12
+* SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
+
+* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
+* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/tractyl_manuform/5x6_right/f411:default
+
+Flashing example for this keyboard:
+
+    make handwired/tractyl_manuform/5x6_right/f411:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).