sporq/qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[Keymap] Unicode and Pointing Device and Autocorect for drashna keymaps (#15415)

Browse Source
This commit is contained in:
Drashna Jaelre
2021-12-14 20:53:36 -08:00
committed by GitHub
parent c10bc9f91e
commit 3fa592a402
45 changed files with 815 additions and 187 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c
View File

@@ -16,7 +16,7 @@
#include "f411.h"
void matrix_init_sub_kb(void) { setPinInputHigh(A0); }
void keyboard_pre_init_sub(void) { setPinInputHigh(A0); }
void matrix_scan_sub_kb(void) {
if (!readPin(A0)) {
@@ -24,6 +24,33 @@ void matrix_scan_sub_kb(void) {
}
}
void bootmagic_lite(void) {
// We need multiple scans because debouncing can't be turned off.
matrix_scan();
#if defined(DEBOUNCE) && DEBOUNCE > 0
wait_ms(DEBOUNCE * 2);
#else
wait_ms(30);
#endif
matrix_scan();
uint8_t row = BOOTMAGIC_LITE_ROW;
uint8_t col = BOOTMAGIC_LITE_COLUMN;
#if defined(SPLIT_KEYBOARD) && defined(BOOTMAGIC_LITE_ROW_RIGHT) && defined(BOOTMAGIC_LITE_COLUMN_RIGHT)
if (!is_keyboard_left()) {
row = BOOTMAGIC_LITE_ROW_RIGHT;
col = BOOTMAGIC_LITE_COLUMN_RIGHT;
}
#endif
if (matrix_get_row(row) & (1 << col) || !readPin(A0)) {
eeconfig_disable();
bootloader_jump();
}
}
#ifdef USB_VBUS_PIN
bool usb_vbus_state(void) {
setPinInputLow(USB_VBUS_PIN);

5
keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
View File

@@ -1,7 +1,7 @@
# Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball
* System Timer on TIM5
* ~~VBUS mod, using PB10~~ (*doesn't seem to work for me*)
* VBUS mod, using PB10 -- does work, but not on my tractyl... bad soldering probably
* Split Hand Pin, using PC14
* Full Duplex Serial/USART using PA2 and PA3 on USART2
* PWM Audio using PB1 and TIM3 and GPT on TIM4
@@ -12,7 +12,8 @@
* SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
* Pull-up resistor (22k) on PA10 to fix reset issue.
* Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin.
* Pins PA9, PA11, A12 are not useable because they're used for USB connection, and can't be shared.
* Pins PA9 is meant for VBUS sense, and has an internal pulldown resistor. A 5.1k pullup resistor can work (but should be avoided)
* Pins PA11 and A12 are not useable because they're used for USB connection, and can't be shared.
* Pin PB2 is used by BOOT1, and is unusable
## Keyboard Info