Lfkeyboards updates (#2421)

* Update smk65 fn layer, add iso * Added Fn layer to ISO keymap * Fix error when backlight is disabled but lighting isn't * Remove broke mini1800 iso map * Add keymaps * Add LFKPad * Add split delete to lfk78 * Typo * Custom keymap
2018-02-23 13:16:10 -05:00
parent f746174874
commit 3f3d0551cd
47 changed files with 2810 additions and 13 deletions
--- a/keyboards/lfkeyboards/lfkpad/lfkpad.c
+++ b/keyboards/lfkeyboards/lfkpad/lfkpad.c
@@ -0,0 +1,176 @@
+#include <avr/sfr_defs.h>
+#include <avr/timer_avr.h>
+#include <avr/wdt.h>
+#include "lfkpad.h"
+#include "keymap.h"
+#include "issi.h"
+#include "TWIlib.h"
+#include "lighting.h"
+#include "debug.h"
+#include "quantum.h"
+
+uint16_t click_hz = CLICK_HZ;
+uint16_t click_time = CLICK_MS;
+uint8_t click_toggle = CLICK_ENABLED;
+
+
+void matrix_init_kb(void)
+{
+    matrix_init_user();
+#ifndef AUDIO_ENABLE
+    // If we're not using the audio pin, drive it low
+    sbi(DDRC, 6);
+    cbi(PORTC, 6);
+#endif
+
+#ifdef ISSI_ENABLE
+    issi_init();
+#endif
+#ifdef WATCHDOG_ENABLE
+    // This is done after turning the layer LED red, if we're caught in a loop
+    // we should get a flashing red light
+    wdt_enable(WDTO_500MS);
+#endif
+
+}
+
+void matrix_scan_kb(void)
+{
+#ifdef WATCHDOG_ENABLE
+    wdt_reset();
+#endif
+#ifdef ISSI_ENABLE
+    // switch/underglow lighting update
+    static uint32_t issi_device = 0;
+    static uint32_t twi_last_ready = 0;
+    if(twi_last_ready > 1000){
+        // Its been way too long since the last ISSI update, reset the I2C bus and start again
+        dprintf("TWI failed to recover, TWI re-init\n");
+        twi_last_ready = 0;
+        TWIInit();
+        force_issi_refresh();
+    }
+    if(isTWIReady()){
+        twi_last_ready = 0;
+        // If the i2c bus is available, kick off the issi update, alternate between devices
+        update_issi(issi_device, issi_device);
+        if(issi_device){
+            issi_device = 0;
+        }else{
+            issi_device = 3;
+        }
+    }else{
+        twi_last_ready++;
+    }
+#endif
+    matrix_scan_user();
+}
+
+void click(uint16_t freq, uint16_t duration){
+#ifdef AUDIO_ENABLE
+    if(freq >= 100 && freq <= 20000 && duration < 100){
+        play_note(freq, 10);
+        for (uint16_t i = 0; i < duration; i++){
+            _delay_ms(1);
+        }
+        stop_all_notes();
+    }
+#endif
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t* record)
+{
+    if (click_toggle && record->event.pressed){
+        click(click_hz, click_time);
+    }
+    if (keycode == RESET) {
+        reset_keyboard_kb();
+    } else {
+    }
+    return process_record_user(keycode, record);
+}
+
+void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
+{
+#ifdef AUDIO_ENABLE
+    int8_t sign = 1;
+#endif
+    if(id == LFK_ESC_TILDE){
+        // Send ~ on shift-esc
+        void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
+        uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
+        if(layer_state == 0){
+            method(shifted ? KC_GRAVE : KC_ESCAPE);
+        }else{
+            method(shifted ? KC_ESCAPE : KC_GRAVE);
+        }
+        send_keyboard_report();
+    }else if(event->event.pressed){
+        switch(id){
+            case LFK_SET_DEFAULT_LAYER:
+                // set/save the current base layer to eeprom, falls through to LFK_CLEAR
+                eeconfig_update_default_layer(1UL << opt);
+                default_layer_set(1UL << opt);
+            case LFK_CLEAR:
+                // Go back to default layer
+                layer_clear();
+                break;
+#ifdef AUDIO_ENABLE
+            case LFK_CLICK_FREQ_LOWER:
+                sign = -1;  // continue to next statement
+            case LFK_CLICK_FREQ_HIGHER:
+                click_hz += sign * 100;
+                click(click_hz, click_time);
+                break;
+            case LFK_CLICK_TOGGLE:
+                if(click_toggle){
+                    click_toggle = 0;
+                    click(4000, 100);
+                    click(1000, 100);
+                }else{
+                    click_toggle = 1;
+                    click(1000, 100);
+                    click(4000, 100);
+                }
+                break;
+            case LFK_CLICK_TIME_SHORTER:
+                sign = -1;  // continue to next statement
+            case LFK_CLICK_TIME_LONGER:
+                click_time += sign;
+                click(click_hz, click_time);
+                break;
+#endif
+        }
+    }
+}
+
+void reset_keyboard_kb(){
+#ifdef WATCHDOG_ENABLE
+    MCUSR = 0;
+    wdt_disable();
+    wdt_reset();
+#endif
+    reset_keyboard();
+}
+
+void led_set_kb(uint8_t usb_led)
+{
+    led_set_user(usb_led);
+}
+
+// LFK lighting info
+const uint8_t rgb_matrices[] = {0, 1};
+const uint8_t rgb_sequence[] = {
+    32,  1,  2,  3,
+    31, 30,  5,  6,
+    28, 27,  7,  8,
+    17, 18,  9,
+    19, 21, 11, 12,
+      22,   14,
+
+    16,         26,
+     4,         25,
+    13,         24,
+          20
+
+};