2020-10-12 04:37:31 +02:00
/*
Copyright 2020 yushakobo
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 2 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
# pragma once
# include "config_common.h"
# include <stdio.h>
/* key matrix size */
# define MATRIX_ROWS 10
# define MATRIX_COLS 7
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS : AVR pins used for columns , left to right
* ROWS : AVR pins used for rows , top to bottom
* DIODE_DIRECTION : COL2ROW = COL = Anode ( + ) , ROW = Cathode ( - , marked on diode )
* ROW2COL = ROW = Anode ( + ) , COL = Cathode ( - , marked on diode )
*
*/
# define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
# define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
/* COL2ROW, ROW2COL*/
# define DIODE_DIRECTION COL2ROW
/* Split hand configration */
# define SPLIT_HAND_MATRIX_GRID D7,B2
# define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
/* Dip switch on matrix grid */
# define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {5,6}, {6,6} }
/*
* Split Keyboard specific options , make sure you have ' SPLIT_KEYBOARD = yes ' in your rules . mk , and define SOFT_SERIAL_PIN .
*/
# define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
# define RGB_DI_PIN D3
# define RGBLED_NUM 64 // Number of LEDs
# ifdef RGB_MATRIX_ENABLE
# define DRIVER_LED_TOTAL RGBLED_NUM
# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
2021-06-10 07:59:19 +02:00
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
2020-10-12 04:37:31 +02:00
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
# define RGB_MATRIX_HUE_STEP 8
# define RGB_MATRIX_SAT_STEP 8
# define RGB_MATRIX_VAL_STEP 8
# define RGB_MATRIX_SPD_STEP 10
# endif
# ifdef RGBLIGHT_ENABLE
# define RGBLIGHT_SPLIT
# define RGBLED_SPLIT { 32, 32 }
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== all animations enable ==*/
// #define RGBLIGHT_ANIMATIONS
// /*== or choose animations ==*/
// #define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// #define RGBLIGHT_EFFECT_SNAKE
// #define RGBLIGHT_EFFECT_KNIGHT
// #define RGBLIGHT_EFFECT_CHRISTMAS
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
# endif
/* Custom font */
# define OLED_FONT_H "keyboards / helix / common / glcdfont.c"
/* Encorder */
# define ENCODERS_PAD_A { B6 }
# define ENCODERS_PAD_B { B5 }
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
# define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
# define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
# define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut ( ctrl + shift + esc ) .
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO ( nKey Rollover ) to be enabled by default , regardless of the saved
* state in the bootmagic EEPROM settings . ( Note that NKRO must be enabled in the
* makefile for this to work . )
*
* If forced on , NKRO can be disabled via magic key ( default = LShift + RShift + N )
* until the next keyboard reset .
*
* NKRO may prevent your keystrokes from being detected in the BIOS , but it is
* fully operational during normal computer usage .
*
* For a less heavy - handed approach , enable NKRO via magic key ( LShift + RShift + N )
* or via bootmagic ( hold SPACE + N while plugging in the keyboard ) . Once set by
* bootmagic , NKRO mode will always be enabled until it is toggled again during a
* power - up .
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction .
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
