qmk-firmware/drivers/painter/st77xx/qp_st7789_opcodes.h

// Copyright 2021 Paul Cotter (@gr1mr3aver)
// SPDX-License-Identifier: GPL-2.0-or-later

#pragma once

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter ST7789 additional command opcodes

// System function commands
#define ST7789_GET_SELF_DIAG 0x0F      // Get self-diagnostic result
#define ST7789_SET_VERT_SCRL 0x33      // Set vertical scroll definition
#define ST7789_SET_VERT_SCRL_ADDR 0x37 // SEt Vertical scroll start address
#define ST7789_SET_MEM_CONT 0x3C       // Memory Write continue
#define ST7789_GET_MEM_CONT 0x3E       // Memory Read continue
#define ST7789_SET_TEAR_LINE 0x44      // Set tear scanline
#define ST7789_GET_TEAR_LINE 0x45      // Get tear scanline
#define ST7789_SET_BRIGHTNESS 0x51     // Set display brightness
#define ST7789_GET_BRIGHTNESS 0x52     // Get display brightness
#define ST7789_SET_CTRL 0x53           // Set CTRL display
#define ST7789_GET_CTRL 0x54           // Get CTRL display value
#define ST7789_SET_CAB_COLOR 0x55      // Set content adaptive brightness control and color enhancement
#define ST7789_GET_CAB_COLOR 0x56      // Get content adaptive brightness control and color enhancement
#define ST7789_SET_CAB_BRIGHTNESS 0x5E // Set content adaptive minimum brightness
#define ST7789_GET_CAB_BRIGHTNESS 0x5F // Get content adaptive minimum brightness
#define ST7789_GET_ABC_SELF_DIAG 0x68  // Get Auto brightness control self diagnostics

// Panel Function Commands
#define ST7789_SET_RAM_CTL 0xB0            // Set RAM control
#define ST7789_SET_RGB_CTL 0xB1            // Set RGB control
#define ST7789_SET_PORCH_CTL 0xB2          // Set Porch control
#define ST7789_SET_FRAME_RATE_CTL_1 0xB3   // Set frame rate control 1
#define ST7789_SET_PARTIAL_CTL 0xB5        // Set Partial control
#define ST7789_SET_GATE_CTL 0xB7           // Set gate control
#define ST7789_SET_GATE_ON_TIMING 0xB8     // Set gate on timing adjustment
#define ST7789_SET_DIGITAL_GAMMA_ON 0xBA   // Enable digital gamma
#define ST7789_SET_VCOM 0xBB               // Set VCOM
#define ST7789_SET_POWER_SAVE 0xBC         // Set power saving mode
#define ST7789_SET_DISP_OFF_POWER 0xBD     // Set display off power saving
#define ST7789_SET_LCM_CTL 0xC0            // Set LCM control
#define ST7789_SET_IDS 0xC1                // Set IDs
#define ST7789_SET_VDV_VRH_ON 0xC2         // Set VDV and VRH command enable
#define ST7789_SET_VRH 0xC3                // Set VRH
#define ST7789_SET_VDV 0xC4                // Set VDV
#define ST7789_SET_VCOM_OFFSET 0xC5        // Set VCOM offset ctl
#define ST7789_SET_FRAME_RATE_CTL_2 0xC6   // Set frame rate control 2
#define ST7789_SET_CABC_CTL 0xC7           // Set CABC Control
#define ST7789_GET_REG_1 0xC8              // Get register value selection1
#define ST7789_GET_REG_2 0xCA              // Get register value selection2
#define ST7789_SET_PWM_FREQ 0xCC           // Set PWM frequency
#define ST7789_SET_POWER_CTL_1 0xD0        // Set power ctl 1
#define ST7789_SET_VAP_VAN_ON 0xD2         // Enable VAP/VAN signal output
#define ST7789_SET_CMD2_ENABLE 0xDF        // Enable command 2
#define ST7789_SET_PGAMMA 0xE0             // Set positive gamma
#define ST7789_SET_NGAMMA 0xE1             // Set negative gamma
#define ST7789_SET_DIGITAL_GAMMA_RED 0xE2  // Set digital gamma lookup table for red
#define ST7789_SET_DIGITAL_GAMMA_BLUE 0xE3 // Get digital gamma lookup table for blue
#define ST7789_SET_GATE_CTL_2 0xE4         // Set gate control 2
#define ST7789_SET_SPI2_ENABLE 0xE7        // Enable SPI2
#define ST7789_SET_POWER_CTL_2 0xE8        // Set power ctl 2
#define ST7789_SET_EQ_TIME_CTL 0xE9        // Set equalize time control
#define ST7789_SET_PROG_CTL 0xEC           // Set program control
#define ST7789_SET_PROG_MODE_ENABLE 0xFA   // Set program mode enable
#define ST7789_SET_NVMEM 0xFC              // Set NVMEM data
#define ST7789_SET_PROG_ACTION 0xFE        // Set program action
Quantum Painter (#10174) * Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation. 2022-04-13 10:00:18 +02:00			`// Copyright 2021 Paul Cotter (@gr1mr3aver)`
			`// SPDX-License-Identifier: GPL-2.0-or-later`

			`#pragma once`

			`////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////`
			`// Quantum Painter ST7789 additional command opcodes`

			`// System function commands`
			`#define ST7789_GET_SELF_DIAG 0x0F // Get self-diagnostic result`
			`#define ST7789_SET_VERT_SCRL 0x33 // Set vertical scroll definition`
			`#define ST7789_SET_VERT_SCRL_ADDR 0x37 // SEt Vertical scroll start address`
			`#define ST7789_SET_MEM_CONT 0x3C // Memory Write continue`
			`#define ST7789_GET_MEM_CONT 0x3E // Memory Read continue`
			`#define ST7789_SET_TEAR_LINE 0x44 // Set tear scanline`
			`#define ST7789_GET_TEAR_LINE 0x45 // Get tear scanline`
			`#define ST7789_SET_BRIGHTNESS 0x51 // Set display brightness`
			`#define ST7789_GET_BRIGHTNESS 0x52 // Get display brightness`
			`#define ST7789_SET_CTRL 0x53 // Set CTRL display`
			`#define ST7789_GET_CTRL 0x54 // Get CTRL display value`
			`#define ST7789_SET_CAB_COLOR 0x55 // Set content adaptive brightness control and color enhancement`
			`#define ST7789_GET_CAB_COLOR 0x56 // Get content adaptive brightness control and color enhancement`
			`#define ST7789_SET_CAB_BRIGHTNESS 0x5E // Set content adaptive minimum brightness`
			`#define ST7789_GET_CAB_BRIGHTNESS 0x5F // Get content adaptive minimum brightness`
			`#define ST7789_GET_ABC_SELF_DIAG 0x68 // Get Auto brightness control self diagnostics`

			`// Panel Function Commands`
			`#define ST7789_SET_RAM_CTL 0xB0 // Set RAM control`
			`#define ST7789_SET_RGB_CTL 0xB1 // Set RGB control`
			`#define ST7789_SET_PORCH_CTL 0xB2 // Set Porch control`
			`#define ST7789_SET_FRAME_RATE_CTL_1 0xB3 // Set frame rate control 1`
			`#define ST7789_SET_PARTIAL_CTL 0xB5 // Set Partial control`
			`#define ST7789_SET_GATE_CTL 0xB7 // Set gate control`
			`#define ST7789_SET_GATE_ON_TIMING 0xB8 // Set gate on timing adjustment`
			`#define ST7789_SET_DIGITAL_GAMMA_ON 0xBA // Enable digital gamma`
			`#define ST7789_SET_VCOM 0xBB // Set VCOM`
			`#define ST7789_SET_POWER_SAVE 0xBC // Set power saving mode`
			`#define ST7789_SET_DISP_OFF_POWER 0xBD // Set display off power saving`
			`#define ST7789_SET_LCM_CTL 0xC0 // Set LCM control`
			`#define ST7789_SET_IDS 0xC1 // Set IDs`
			`#define ST7789_SET_VDV_VRH_ON 0xC2 // Set VDV and VRH command enable`
			`#define ST7789_SET_VRH 0xC3 // Set VRH`
			`#define ST7789_SET_VDV 0xC4 // Set VDV`
			`#define ST7789_SET_VCOM_OFFSET 0xC5 // Set VCOM offset ctl`
			`#define ST7789_SET_FRAME_RATE_CTL_2 0xC6 // Set frame rate control 2`
			`#define ST7789_SET_CABC_CTL 0xC7 // Set CABC Control`
			`#define ST7789_GET_REG_1 0xC8 // Get register value selection1`
			`#define ST7789_GET_REG_2 0xCA // Get register value selection2`
			`#define ST7789_SET_PWM_FREQ 0xCC // Set PWM frequency`
			`#define ST7789_SET_POWER_CTL_1 0xD0 // Set power ctl 1`
			`#define ST7789_SET_VAP_VAN_ON 0xD2 // Enable VAP/VAN signal output`
			`#define ST7789_SET_CMD2_ENABLE 0xDF // Enable command 2`
			`#define ST7789_SET_PGAMMA 0xE0 // Set positive gamma`
			`#define ST7789_SET_NGAMMA 0xE1 // Set negative gamma`
			`#define ST7789_SET_DIGITAL_GAMMA_RED 0xE2 // Set digital gamma lookup table for red`
			`#define ST7789_SET_DIGITAL_GAMMA_BLUE 0xE3 // Get digital gamma lookup table for blue`
			`#define ST7789_SET_GATE_CTL_2 0xE4 // Set gate control 2`
			`#define ST7789_SET_SPI2_ENABLE 0xE7 // Enable SPI2`
			`#define ST7789_SET_POWER_CTL_2 0xE8 // Set power ctl 2`
			`#define ST7789_SET_EQ_TIME_CTL 0xE9 // Set equalize time control`
			`#define ST7789_SET_PROG_CTL 0xEC // Set program control`
			`#define ST7789_SET_PROG_MODE_ENABLE 0xFA // Set program mode enable`
			`#define ST7789_SET_NVMEM 0xFC // Set NVMEM data`
			`#define ST7789_SET_PROG_ACTION 0xFE // Set program action`