sporq/qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
cd379c69a0
qmk-firmware/build_keyboard.mk

398 lines
13 KiB
Makefile
Raw Normal View History

Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Determine what keyboard we are building and setup the build environment.
#
# We support folders up to 5 levels deep below `keyboards/`. This file is
# responsible for determining which folder is being used and doing the
# corresponding environment setup.
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
ifndef VERBOSE
.SILENT:
endif
.DEFAULT_GOAL := all
The makefile actually calls build_test
2016-08-21 16:14:38 +02:00
include common.mk
Change order of variable assignment BUILD_DIR and TARGET was assigned too late, so the dfu-util target, which depends on them did not work.
2016-08-21 12:53:36 +02:00
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Set the filename for the final firmware binary
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
STM32_PATH := quantum/stm32
Change order of variable assignment BUILD_DIR and TARGET was assigned too late, so the dfu-util target, which depends on them did not work.
2016-08-21 12:53:36 +02:00
# Force expansion
TARGET := $(TARGET)
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# For split boards we need to set a master half.
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
MASTER ?= left
ifdef master
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
MASTER = $(master)
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
endif
Fix redundant process_music.c in sources
2017-02-26 06:13:47 +01:00
ifeq ($(MASTER),right)
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
OPT_DEFS += -DMASTER_IS_ON_RIGHT
Fix redundant process_music.c in sources
2017-02-26 06:13:47 +01:00
else
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
ifneq ($(MASTER),left)
More common settings for unit tests and keyboards
2016-08-27 12:43:12 +02:00
$(error MASTER does not have a valid value(left/right))
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
endif
More common settings for unit tests and keyboards
2016-08-27 12:43:12 +02:00
endif
Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522) * add temporary compile test shell script * Extended support of SKIP_VERSION to make invariant compile results during testing. * build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support Support compiled object enclosed in library. e.g. ``` LIB_SRC += xxxx.c xxxx.c --> xxxx.o ---> xxxx.a ``` * remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c * add SKIP_DEBUG_INFO into tmk_core/rules.mk When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time. * tmk_core/rules.mk: Library object need -fno-lto * add SKIP_DEBUG_INFO=yes * remove temporary compile test shell script * add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h * quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-15 06:31:56 +01:00
ifdef SKIP_VERSION
OPT_DEFS += -DSKIP_VERSION
endif
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Determine which subfolders exist.
KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2)))
KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3)))
KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4)))
KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1))
KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2))
KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3))
KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4))
KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5))
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
KEYBOARD_PATHS :=
KEYBOARD_PATH_1 := keyboards/$(KEYBOARD_FOLDER_PATH_1)
KEYBOARD_PATH_2 := keyboards/$(KEYBOARD_FOLDER_PATH_2)
KEYBOARD_PATH_3 := keyboards/$(KEYBOARD_FOLDER_PATH_3)
KEYBOARD_PATH_4 := keyboards/$(KEYBOARD_FOLDER_PATH_4)
KEYBOARD_PATH_5 := keyboards/$(KEYBOARD_FOLDER_PATH_5)
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
KEYBOARD_PATHS += $(KEYBOARD_PATH_5)
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
KEYBOARD_PATHS += $(KEYBOARD_PATH_4)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
KEYBOARD_PATHS += $(KEYBOARD_PATH_3)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
KEYBOARD_PATHS += $(KEYBOARD_PATH_2)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
endif
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Pull in rules.mk files from all our subfolders
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
include $(KEYBOARD_PATH_5)/rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/rules.mk)","")
include $(KEYBOARD_PATH_4)/rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/rules.mk)","")
include $(KEYBOARD_PATH_3)/rules.mk
Actual compilation
2016-08-08 09:26:23 +02:00
endif
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/rules.mk)","")
include $(KEYBOARD_PATH_2)/rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
include $(KEYBOARD_PATH_1)/rules.mk
endif
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_5)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_4)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_3)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_2)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_1)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
else ifneq ($(LAYOUTS),)
include build_layout.mk
else
$(error Could not find keymap)
# this state should never be reached
endif
ifeq ($(strip $(CTPC)), yes)
CONVERT_TO_PROTON_C=yes
endif
ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
TARGET := $(TARGET)_proton_c
include $(STM32_PATH)/proton_c.mk
OPT_DEFS += -DCONVERT_TO_PROTON_C
endif
Add a mechanism for force building a particular community layout (#5027) * Add a mechanism for force building a particular community layout * Add docs for FORCE_LAYOUT argument * Update output name when FORCE_LAYOUT is enabled
2019-02-15 05:14:26 +01:00
ifneq ($(FORCE_LAYOUT),)
TARGET := $(TARGET)_$(FORCE_LAYOUT)
endif
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
include quantum/mcu_selection.mk
ifdef MCU_FAMILY
OPT_DEFS += -DQMK_STM32
KEYBOARD_PATHS += $(STM32_PATH)
endif
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Find all the C source files to be compiled in subfolders.
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
KEYBOARD_SRC :=
KEYBOARD_C_1 := $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).c
KEYBOARD_C_2 := $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).c
KEYBOARD_C_3 := $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).c
KEYBOARD_C_4 := $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).c
KEYBOARD_C_5 := $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).c
Actual compilation
2016-08-08 09:26:23 +02:00
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
ifneq ("$(wildcard $(KEYBOARD_C_5))","")
KEYBOARD_SRC += $(KEYBOARD_C_5)
endif
ifneq ("$(wildcard $(KEYBOARD_C_4))","")
KEYBOARD_SRC += $(KEYBOARD_C_4)
endif
ifneq ("$(wildcard $(KEYBOARD_C_3))","")
KEYBOARD_SRC += $(KEYBOARD_C_3)
endif
ifneq ("$(wildcard $(KEYBOARD_C_2))","")
KEYBOARD_SRC += $(KEYBOARD_C_2)
endif
ifneq ("$(wildcard $(KEYBOARD_C_1))","")
KEYBOARD_SRC += $(KEYBOARD_C_1)
endif
Fix LAYOUT define generation (#4148) * Fix LAYOUT define generation Prior to this, only the full keyboard path was defined. Eg `KEYBOARD_planck_rev6`. But the docs mention `KEYBOAD_planck`, which never actually gets defined. This addresses this, and creates a define for each level of the keyboard folder, so that stuff like `KEYBOARD_planck` actually exists. * Clean up changes to make it more readable
2018-10-16 20:14:52 +02:00
# Generate KEYBOARD_name_subname for all levels of the keyboard folder
KEYBOARD_FILESAFE_1 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_1)))
KEYBOARD_FILESAFE_2 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_2)))
KEYBOARD_FILESAFE_3 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_3)))
KEYBOARD_FILESAFE_4 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_4)))
KEYBOARD_FILESAFE_5 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_5)))
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
Fix LAYOUT define generation (#4148) * Fix LAYOUT define generation Prior to this, only the full keyboard path was defined. Eg `KEYBOARD_planck_rev6`. But the docs mention `KEYBOAD_planck`, which never actually gets defined. This addresses this, and creates a define for each level of the keyboard folder, so that stuff like `KEYBOARD_planck` actually exists. * Clean up changes to make it more readable
2018-10-16 20:14:52 +02:00
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_5)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_4)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_3)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_2)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_1)
endif
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so
# that the same keymap may be used on multiple keyboards.
#
# We grab the most top-level include file that we can. That file should
# use #ifdef statements to include all the neccesary subfolder includes,
# as described here:
#
# https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic
#
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","")
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).h)","")
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_2).h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).h)","")
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_3).h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).h)","")
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_4).h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).h)","")
QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h
endif
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Determine and set parameters based on the keyboard's processor family.
# We can assume a ChibiOS target When MCU_FAMILY is defined since it's
# not used for LUFA
Output specific include paths
2016-08-15 07:45:36 +02:00
ifdef MCU_FAMILY
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
FIRMWARE_FORMAT?=bin
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
PLATFORM=CHIBIOS
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 21:07:52 +02:00
else ifdef ARM_ATSAM
PLATFORM=ARM_ATSAM
FIRMWARE_FORMAT=bin
Output specific include paths
2016-08-15 07:45:36 +02:00
else
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
PLATFORM=AVR
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
FIRMWARE_FORMAT?=hex
Output specific include paths
2016-08-15 07:45:36 +02:00
endif
ifeq ($(PLATFORM),CHIBIOS)
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
include $(TMK_PATH)/chibios.mk
OPT_OS = chibios
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_4)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_3)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_2)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h
Update whitefox to use the K-Type teensy workaround
2018-04-04 04:43:40 +02:00
else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","")
OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
endif
Output specific include paths
2016-08-15 07:45:36 +02:00
endif
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Find all of the config.h files and add them to our CONFIG_H define.
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
CONFIG_H :=
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_5)/config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_4)/config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_3)/config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_2)/config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_1)/config.h
Add output specific config file
2016-08-15 07:58:05 +02:00
endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
POST_CONFIG_H :=
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
endif
Fix redundant process_music.c in sources
2017-02-26 06:13:47 +01:00
# Save the defines and includes here, so we don't include any keymap specific ones
More general system for generating several outputs
2016-08-15 07:20:16 +02:00
PROJECT_DEFS := $(OPT_DEFS)
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
Add output specific config file
2016-08-15 07:58:05 +02:00
PROJECT_CONFIG := $(CONFIG_H)
More general system for generating several outputs
2016-08-15 07:20:16 +02:00
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Userspace setup and definitions
Talljoe's layout with common keymap. (#2764) * Add userspace to talljoe layout. * Move more authority to userspace and create Bananasplit layout. * Move more things into userspace. * Common Core example * More work on common layout. * Num layer. * talljoe-ansi layout * Updates for Zeal60 * Add Zeal60 to 60_ansi_split_bs_rshift * Swap Escape and Grave * Num-layer tweaks * More tweaks. * Add 1up60rgb to world of layouts. * Rename ansi_split_bs_rshift layout to hhkb. * Control RGB Backlight. * change capslock led * Remove obsolete line from rules.mk. * Add user-friendly userspace override. * Fix enter for 1uprgb60 * Revert "Rename ansi_split_bs_rshift layout to hhkb." This reverts commit 53133719db25c7cb6a199108bbf5d980481a45f4.
2018-04-21 19:48:30 +02:00
ifeq ("$(USER_NAME)","")
USER_NAME := $(KEYMAP)
endif
USER_PATH := users/$(USER_NAME)
Creates a userspace for keymaps (#1559) * create a user space * adds example * document, add readme.md * jackhumbert userspace, ergodox keymap
2017-10-21 23:44:11 +02:00
-include $(USER_PATH)/rules.mk
Import userspace config.h according to USER_NAME (#2983) * Import userspace config.h according to USER_NAME * Use USER_PATH instead of directly using USER_NAME
2018-05-22 21:47:28 +02:00
ifneq ("$(wildcard $(USER_PATH)/config.h)","")
CONFIG_H += $(USER_PATH)/config.h
Add userspace config.h handling to build script (#2640) * Add userspace 'config.h' file * Add more robust docs * Remove config.h code from drashna userspace * Spelling error * Include links to Config Options page * Remove config.h documentation from userspace doc, as it's no longer needed
2018-04-01 06:02:40 +02:00
endif
Creates a userspace for keymaps (#1559) * create a user space * adds example * document, add readme.md * jackhumbert userspace, ergodox keymap
2017-10-21 23:44:11 +02:00
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
More general system for generating several outputs
2016-08-15 07:20:16 +02:00
KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
CONFIG_H += $(KEYMAP_PATH)/config.h
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
endif
# # project specific files
Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522) * add temporary compile test shell script * Extended support of SKIP_VERSION to make invariant compile results during testing. * build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support Support compiled object enclosed in library. e.g. ``` LIB_SRC += xxxx.c xxxx.c --> xxxx.o ---> xxxx.a ``` * remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c * add SKIP_DEBUG_INFO into tmk_core/rules.mk When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time. * tmk_core/rules.mk: Library object need -fno-lto * add SKIP_DEBUG_INFO=yes * remove temporary compile test shell script * add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h * quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-15 06:31:56 +01:00
SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
SRC += $(KEYBOARD_SRC) \
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
$(KEYMAP_C) \
Split common.mk into common.mk and common_features.mk To support including keyboard/keymap specific rules before it
2017-06-16 21:14:47 +02:00
$(QUANTUM_SRC)
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(KEYMAP_PATH)
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
VPATH += $(KEYBOARD_PATHS)
More common settings for unit tests and keyboards
2016-08-27 12:43:12 +02:00
VPATH += $(COMMON_VPATH)
Creates a userspace for keymaps (#1559) * create a user space * adds example * document, add readme.md * jackhumbert userspace, ergodox keymap
2017-10-21 23:44:11 +02:00
VPATH += $(USER_PATH)
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
Split common.mk into common.mk and common_features.mk To support including keyboard/keymap specific rules before it
2017-06-16 21:14:47 +02:00
include common_features.mk
Added protocol.mk to build
2016-11-25 08:15:12 +01:00
include $(TMK_PATH)/protocol.mk
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
include $(TMK_PATH)/common.mk
Updates bootloader settings, adds file size check (#2029) * pull fuse settings for bootloader jump * fix 32a chips * make automatic bootloader selection optional * quantify bootloaders * fixs #164, speeds up dfu reset * fix for chips w/o usb * missing an n * fix bootloader sizes, use words for addresses * fix bmini, pearl, and [[ issue, make things quiet * ignore avr errors on arm for now * update settings for the light * document bootloader stuff * add bootloader title
2017-11-28 05:08:21 +01:00
include bootloader.mk
Split common.mk into common.mk and common_features.mk To support including keyboard/keymap specific rules before it
2017-06-16 21:14:47 +02:00
Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522) * add temporary compile test shell script * Extended support of SKIP_VERSION to make invariant compile results during testing. * build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support Support compiled object enclosed in library. e.g. ``` LIB_SRC += xxxx.c xxxx.c --> xxxx.o ---> xxxx.a ``` * remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c * add SKIP_DEBUG_INFO into tmk_core/rules.mk When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time. * tmk_core/rules.mk: Library object need -fno-lto * add SKIP_DEBUG_INFO=yes * remove temporary compile test shell script * add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h * quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-15 06:31:56 +01:00
SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
More common settings for unit tests and keyboards
2016-08-27 12:43:12 +02:00
SRC += $(TMK_COMMON_SRC)
OPT_DEFS += $(TMK_COMMON_DEFS)
EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
ifeq ($(PLATFORM),AVR)
Got ps2avrGB to work with the V-USB protocol
2017-01-21 18:30:06 +01:00
ifeq ($(strip $(PROTOCOL)), VUSB)
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
include $(TMK_PATH)/protocol/vusb.mk
Got ps2avrGB to work with the V-USB protocol
2017-01-21 18:30:06 +01:00
else
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
include $(TMK_PATH)/protocol/lufa.mk
Got ps2avrGB to work with the V-USB protocol
2017-01-21 18:30:06 +01:00
endif
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
include $(TMK_PATH)/avr.mk
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
endif
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 21:07:52 +02:00
ifeq ($(PLATFORM),ARM_ATSAM)
include $(TMK_PATH)/arm_atsam.mk
include $(TMK_PATH)/protocol/arm_atsam.mk
endif
Merge ChibiOS and LUFA descriptor support (#2362) * Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude
2018-02-08 21:07:46 +01:00
ifeq ($(PLATFORM),CHIBIOS)
include $(TMK_PATH)/protocol/chibios.mk
endif
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
Fix code formatting in build_keyboard.mk
2017-04-12 08:52:40 +02:00
VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer
VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer
include $(VISUALIZER_PATH)/visualizer.mk
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
CONFIG_H += $(POST_CONFIG_H)
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
More general system for generating several outputs
2016-08-15 07:20:16 +02:00
OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
$(KEYMAP_OUTPUT)_SRC := $(SRC)
Creates a layouts/ folder for keymaps shared between keyboards (#1609) * include variables and .h files as pp directives * start layout compilation * split ergodoxes up * don't compile all layouts for everything * might seg fault * reset layouts variable * actually reset layouts * include rules.mk instead * remove includes from rules.mk * update variable setting * load visualizer from path * adds some more examples * adds more layouts * more boards added * more boards added * adds documentation for layouts * use lowercase names for LAYOUT_ * add layout.json files for each layout * add community folder, default keymaps for layouts * touch-up default layouts * touch-up layouts, some keyboard rules.mk * update documentation for layouts * fix up serial/i2c switches
2017-08-24 04:29:07 +02:00
$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH_1)/config.h\" \
Creates a layouts/ folder for keymaps shared between keyboards (#1609) * include variables and .h files as pp directives * start layout compilation * split ergodoxes up * don't compile all layouts for everything * might seg fault * reset layouts variable * actually reset layouts * include rules.mk instead * remove includes from rules.mk * update variable setting * load visualizer from path * adds some more examples * adds more layouts * more boards added * more boards added * adds documentation for layouts * use lowercase names for LAYOUT_ * add layout.json files for each layout * add community folder, default keymaps for layouts * touch-up default layouts * touch-up layouts, some keyboard rules.mk * update documentation for layouts * fix up serial/i2c switches
2017-08-24 04:29:07 +02:00
-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
-DQMK_SUBPROJECT -DQMK_SUBPROJECT_H -DQMK_SUBPROJECT_CONFIG_H
More common settings for unit tests and keyboards
2016-08-27 12:43:12 +02:00
$(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS)
Add output specific config file
2016-08-15 07:58:05 +02:00
$(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
UGFX is compiled once per keyboard instead of keymap
2016-08-28 22:25:39 +02:00
$(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC) $(GFXSRC)
$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) $(GFXDEFS)
$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
More general system for generating several outputs
2016-08-15 07:20:16 +02:00
Rules for compiling and linking google test
2016-08-22 08:16:08 +02:00
# Default target.
Updates bootloader settings, adds file size check (#2029) * pull fuse settings for bootloader jump * fix 32a chips * make automatic bootloader selection optional * quantify bootloaders * fixs #164, speeds up dfu reset * fix for chips w/o usb * missing an n * fix bootloader sizes, use words for addresses * fix bmini, pearl, and [[ issue, make things quiet * ignore avr errors on arm for now * update settings for the light * document bootloader stuff * add bootloader title
2017-11-28 05:08:21 +01:00
all: build check-size
Always copy the firmware file to the root qmk_firmware directory (#2314) * Always copy the firmware file to the root qmk_firmware directory * remove circular dependency
2018-01-28 20:11:28 +01:00
build: elf cpfirmware
Fix file size check for parallel make (#5012)
2019-01-31 03:20:13 +01:00
check-size: build
More general system for generating several outputs
2016-08-15 07:20:16 +02:00
Add makefile target 'show_build_options' and 'show_all_features' (#5048) * Add makefile target 'show_build_options' and 'show_all_features' Example: ``` $ make planck:default:show_all_features QMK Firmware 0.6.266 Making planck/rev5 with keymap default and target show_all_features PLATFORM = AVR FIRMWARE_FORMAT = hex Build Options: BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = no SLEEP_LED_ENABLE = no NKRO_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = no MIDI_ENABLE = no UNICODE_ENABLE = no BLUETOOTH_ENABLE = no AUDIO_ENABLE = yes FAUXCLICKY_ENABLE = HD44780_ENABLE = Other Features: API_SYSEX_ENABLE = no RGB_MATRIX_ENABLE = no ``` * remove duplicate 'SPLIT_KEYBOARD' * add .PHONY, change 'echo' -> '@echo' * update show_options.mk: useing variable BUILD_OPTION_NAMES, HARDWARE_OPTION_NAMES and OTHER_OPTION_NAMES * update show_options.mk: add KEYBOARD,KEYMAP * update show_options.mk: add sorting * update show_options.mk: add show_full_features, add $(origin XXX) * update show_options.mk: Macro names was collected from keyboards/. * update show_options.mk: add some Macro Names
2019-02-15 02:52:58 +01:00
include show_options.mk
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
include $(TMK_PATH)/rules.mk
Reference in New Issue Copy Permalink