qmk-firmware/keyboards/mechlovin/zed60/config.h

/*
Copyright 2022 Mechlovin'

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID    0x4D4C
#define PRODUCT_ID   0x0602
#define DEVICE_VER   0x0001
#define MANUFACTURER Mechlovin Studio
#define PRODUCT      Zed60

/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
#define MATRIX_ROW_PINS { B10, B2, B1, B0, A2 }
#define MATRIX_COL_PINS { A10, A3, A9, A8, B15, B14, B13, B12, B5, B4, B3, A15, B7, B6 }
#define UNUSED_PINS

/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW

#define LED_CAPS_LOCK_PIN A4

#ifdef RGBLIGHT_ENABLE
#define RGB_DI_PIN A7
#define RGBLED_NUM 22
#define RGBLIGHT_LIMIT_VAL 255

#define WS2812_SPI SPID1 // default: SPID1
#define WS2812_SPI_MOSI_PAL_MODE 5 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5

//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
#    define RGBLIGHT_HUE_STEP 8
#    define RGBLIGHT_SAT_STEP 8
#    define RGBLIGHT_VAL_STEP 8
#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */

#    define RGBLIGHT_EFFECT_BREATHING
#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#    define RGBLIGHT_EFFECT_SNAKE
#    define RGBLIGHT_EFFECT_KNIGHT
#    define RGBLIGHT_EFFECT_CHRISTMAS
#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
#    define RGBLIGHT_EFFECT_RGB_TEST
#    define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
#endif

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5