qmk-firmware/protocol/iwrap/iWRAP5.txt

Terminology
===========
PSM
HIDP        HID Protocol
L2CAP       Logical Link Control Adaptation Protocol
MTU         Maximum Transmission Unit



HID Protocol
============
3 of HID_SPEC_V11.pdf

Channel
-------
Control channel     PSM=0x0011
Interrupt channel   PSM=0x0013

Message
-------
HANDSHAKE(0)
HID_CONTROL(1)

GET_REPORT(4)
    Host requests report(DATA payload on Control channel) from Device
                Size    Desc
    ------------------------------------------------------------------------------
    HIDP-Hdr    1       7..4: HIDP Message TYpe(4: GET_REPORT)
                        3: Size(1:2-octed buffer size, 0:size of the report)
                        2: 0
                        1..0: Report Type(1:input, 2:output, 3: feature)
    ReportID    1       Optional
    BufferSize  2       Optional(specified when Size=1)

SET_REPORT(5)
GET_PROTOCOL(6)
SET_PROTOCOL(7)

DATA(A)
    Input/Output Report: All DATA payloads flow on Interrupt channel.
    Other: flows on Control channel.
                Size    Desc
    ------------------------------------------------------------------------------
    HIDP-Hdr    1       7..4    0xA
                        3..2    Reserved(0)
                        1..0    Report Type(0:Other, 1:Input, 2:Output, 3:Feature)
    Payload     N               Data




Boot Protocol
=============
3.3.2
No report descriptor, fixed report descriptors defined.

Device      ReportID    Size
---------------------------------
Reserved    0
Keyboard    1           9octets
Mouse       2           4octets
Reserved    3-255

Report descriptor
-----------------
Report ID is added to USB HID boot protocol descriptor.
Boot Protocol device doesn't need to supply descriptors. and can send extra data on end of boot report this data will be ignored unless host supports report descriptor.

Report Protocol devices can have specific descriptors. Using Boot protocol descriptor followed by extra data may be useful for compatibility to Boot protocol only supported host.

NOTE:
Bluegiga HID sample say report ID of mouse is 1 but 2?
Bluegiga HID sample say report ID of consumer page is 2 but 3?
** mouse.desc and consumer.desc were fixed.
                size
keyboard.desc   67  0x43 
mouse.desc      60  0x3c
consumer.desc   82  0x52
combo.desc      209 0xd1



SDP
===
attributes(3.3.2)
----------
HIDDeviceSubclass
    which type is supported in Boot Protocol Mode
    7 6
    ---
    0 1 Keyboard
    1 0 Pointing device
    1 1 Combo keyboard/pointing device

HIDBootDevice
    TRUE
HIDReconnectInitiate
    TRUE


Class of Device/Service
=======================
http://phys.sci.hokudai.ac.jp/LABS/yts/pic/GB002/Bluetooth_assigned_numbers_baseband.pdf

0x0005C0        Keyboard and Pointing deivce(combo)


    23      16 15       8 7         0
    ---------------------------------
    Service      |Major  |Minor   |Format

    Format type
    1 0
    ---
    0 0

    Minor Device Class of Peripheral Major
    7 6
    ---
    0 1 Keyboard
    1 0 Pointing device
    1 1 Combo keyboard/pointing device


    Major device classes
    12 11 10  9  8
    --------------
     0  0  0  0  0  Miscellaneous
     0  0  0  0  1  Computer
     0  0  0  1  0  Phone
     0  0  0  1  1  LAN /Network Access point
     0  0  1  0  0  Audio/Video (headset,speaker,stereo, video display, vcr.....
     0  0  1  0  1 *Peripheral (mouse, joystick, keyboards, ..... )
     0  0  1  1  0  Imaging (printing, scanner, camera, display, ...)
     1  1  1  1  1  Uncategorized, specific device code not specified
     X  X  X  X  X  All other values reserved


    Major service classes
    bit
    --------------------------------------
    13 Limited Discoverable Mode [Ref #1]
    14 (reserved)
    15 (reserved)
    16 Positioning (Location identification)
    17 Networking (LAN, Ad hoc, ...)
    18 Rendering (Printing, Speaker, ...) 
    19 Capturing (Scanner, Microphone, ...)
    20 Object Transfer (v-Inbox, v-Folder, ...)
    21 Audio (Speaker, Microphone, Headset service, ...)
    22 Telephony (Cordless telephony, Modem, Headset service, ...)
    23 Information (WEB-server, WAP-server, ...)




Authentication SSP
-------------------
SET BT SSP 2 0      PASS KEY entering
SET BT SSP 3 0      NO PASS KEY entering
SET BT SSP <capabilities> <mitm>
    <capabilities>: 0:display only 1:display+yes/no button 2:keyboard only 3:none
SET BT SSP 2 1  # 2:keyboard only 1:Man-in-the-middle protection is needed
SET BT SSP 2 0  # 2:keyboard only 0:Man-in-the-middle protection is not needed


SET BT SSP 2 1
    bond only if MITM protection is supported by host
SET BT SSP 2 0
    bond even if MITM protection is not supported by host

On Windows 'Add device' causes SSP PASSKEY event on iWRAP
    SSP PASSKEY 78:dd:08:b7:e4:a2 ?

If device has display(0 or 1) this event occurs. User should be shown this code on the device.
    SSP CONFIRM 78:dd:08:b7:e4:a2 517572


SET BT SSP 3 0
    No input/output, No MITM protection.
    Without procedure of authentication the divice is bond to host.


Connect
=======
CALL 78:dd:08:b7:e4:a2 11 HID


Setting
========
Following settings need to be done before wiring into keyboard.
- UART speed: 38400bps(115200bps didn't work with software serial)
- No SSP procedure(without MITM protection)
- No Power Saving

# clear pairing record and set default
SET BT PAIR *
SET RESET

SET CONTROL INIT SET CONTROL MUX 0
SET CONTROL BAUD 38400,8n1
SET BT NAME TMK Blootooth WT12
SET BT CLASS 0005c0
SET BT AUTH * 0000
SET BT SSP 3 0
SET CONTROL CONFIG 4800
SET PROFILE HID 0f c0 0100 00 en 0409 TMK Bluetooth keyboard(WT12)
SET PROFILE SPP

# power saving?
SET BT SNIFF 100 20 1 8


# Report Descriptor
# combo keyboard + mouse + consumer
HID SET d2 05010906a1010507850119e029e715002501750195088102950175088101950575010508850119012905910295017503910395067508150025650507190029658100c005010902a1010901a1008502050919012908150025017501950881020501093009311581257f750895028106093895018106050c0a380295018106c0c0050c0901a1018503050c1500250109e909ea09e209cd19b529b87501950881020a8a010a21020a2a021a23022a27027501950881020a83010a96010a92010a9e010a94010a060209b209b4750195088102c0



SET PROFILE HID
---------------
    SET PROFILE HID 0d  c0 100 0 en 0409 HHKB pro Bluetooth keyboard
    {function bit}  uint8
    {subclass}      uint8
    {version}       uint16
    {country}       uint8
    {BTlang}        char[2]
    {USBlang}       uint16
    {name}          string


SET BT CLASS
------------
    See Class of Device
    composite device: keyboard and mouse
    SET BT CLASS 005c0






----------
after setting
----------
set
SET BT BDADDR 00:07:80:47:22:14
SET BT NAME TMK Blootooth WT12
SET BT CLASS 0005c0
SET BT AUTH * 0000
SET BT IDENT BT:47 f000 5.0.1 Bluegiga iWRAP
SET BT LAP 9e8b33
SET BT PAGEMODE 4 2000 1
SET BT PAIR 78:dd:08:b7:e4:a2 9e3d85c91bcae73fef8cc10bec18b42f
SET BT POWER 3 3 3
SET BT ROLE 0 f 7d00
SET BT SNIFF 0 20 1 8
SET BT SSP 3 0
SET BT MTU 667
SET CONTROL BAUD 38400,8n1
SET CONTROL CD 00 0
SET CONTROL ECHO 7
SET CONTROL ESCAPE 43 00 1
SET CONTROL GAIN 0 5
SET CONTROL INIT SET CONTROL MUX 0
SET CONTROL MSC DTE 00 00 00 00 00 00
SET CONTROL MUX 1
SET CONTROL PIO 00 00
SET CONTROL READY 00
SET PROFILE HID 0f c0 0100 00 en 0409 TMK Bluetooth keyboard(WT12)
SET

set control config list
SET CONTROL CONFIG 0000 0000 0000 4900 KLUDGE INTERACTIVE_PIN UART_LATENCY


info config
WRAP THOR AI (5.0.1 build 620)
Copyright (c) 2003-2012 Bluegiga Technologies Inc.
Compiled on Oct  1 2012 10:56:21, running on WT12-A module, psr v31
        BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP MAP MDP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME
        - BOCK4 version 620 (Oct  1 2012 10:56:03) (max acl/sco 7/1)
        - Bluetooth version 3.0, Power class 2
        - Loader 8615, firmware 8825 (56-bit encryption), native execution mode
        - up 0 days, 01:50, 2 connections (pool 2)
        - User configuration:
&028d = 0001
&0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000
&0298 = c053
&0299 = 0000 0000
&02a3 = 0030 0030 0030 0030
&02a4 = 009d 0000
&02a5 = 0053 0045 0054 0020 0043 004f 004e 0054 0052 004f 004c 0020 004d 0055 0058 0020 0030
&02a7 = 0000 05c0
&02a8 = 0800 0000 0000 0000
&02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
&02ac = 0000 0000 002b 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
&02ad = 4d54 204b 6c42 6f6f 6f74 746f 2068 5457 3231
&02b0 = fa65 b0aa 934a 077b a600 d1cc fe58 8dd5
&02b3 = 0004 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0005 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0005
&02b7 = 000f 00c0 0100 0000 0065 006e 0409 4d54 204b 6c42 6575 6f74 746f &02bb = 8000
READY.
----------



-----
After 5.0.1 Firmware update
Firmware: ai-5.0.1-620-25b.bc4.dfu
PSR: wt12-a.ai-5.0.1-620-25b.psrf
-----
info config
WRAP THOR AI (5.0.1 build 620)
Copyright (c) 2003-2012 Bluegiga Technologies Inc.
Compiled on Oct  1 2012 10:56:21, running on WT12-A module, psr v31
        BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP MAP MDP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME
        - BOCK4 version 620 (Oct  1 2012 10:56:03) (max acl/sco 7/1)
        - Bluetooth version 3.0, Power class 2
        - Loader 8615, firmware 8825 (56-bit encryption), native execution mode
        - up 0 days, 00:03, 0 connections (pool 1)
        - User configuration:
&0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000
&0299 = 0000 0000
&02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
&02ac = 0000 0000 002b 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
&02ad = 5457 3231 412d
&02b0 = fa65 b0aa 934a 077b a600 d1cc fe58 8dd5
READY.

set
SET BT BDADDR 00:07:80:47:22:14
SET BT NAME WT12-A
SET BT CLASS 001f00
SET BT IDENT BT:47 f000 5.0.1 Bluegiga iWRAP
SET BT LAP 9e8b33
SET BT PAGEMODE 4 2000 1
SET BT PAIR 78:dd:08:b7:e4:a2 af18f81faa107e6dd068762ef921f48b
SET BT POWER 3 3 3
SET BT ROLE 0 f 7d00
SET BT SNIFF 0 20 1 8
SET BT SSP 3 0
SET BT MTU 667
SET CONTROL BAUD 115200,8n1
SET CONTROL CD 00 0
SET CONTROL ECHO 7
SET CONTROL ESCAPE 43 00 1
SET CONTROL GAIN 0 5
SET CONTROL MSC DTE 00 00 00 00 00 00
SET CONTROL PIO 00 00
SET CONTROL READY 00
SET PROFILE SPP Bluetooth Serial Port
SET

set control config list
SET CONTROL CONFIG 0000 0000 0000 0100 KLUDGE
---------