255 lines
7.8 KiB
C
255 lines
7.8 KiB
C
|
/* Copyright 2020 Richard Sutherland <rich@brickbots.com>
|
||
|
|
*
|
||
|
|
* This program is free software: you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License as published by
|
||
|
|
* the Free Software Foundation, either version 2 of the License, or
|
||
|
|
* (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public License
|
||
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
|
|
*/
|
||
|
|
#include "spi_master.h"
|
||
|
|
#include "adns.h"
|
||
|
|
#include "debug.h"
|
||
|
|
#include "quantum.h"
|
||
|
|
#include "pointing_device.h"
|
||
|
|
#include "adns9800_srom_A6.h"
|
||
|
|
|
||
|
|
// registers
|
||
|
|
#define REG_Product_ID 0x00
|
||
|
|
#define REG_Revision_ID 0x01
|
||
|
|
#define REG_Motion 0x02
|
||
|
|
#define REG_Delta_X_L 0x03
|
||
|
|
#define REG_Delta_X_H 0x04
|
||
|
|
#define REG_Delta_Y_L 0x05
|
||
|
|
#define REG_Delta_Y_H 0x06
|
||
|
|
#define REG_SQUAL 0x07
|
||
|
|
#define REG_Pixel_Sum 0x08
|
||
|
|
#define REG_Maximum_Pixel 0x09
|
||
|
|
#define REG_Minimum_Pixel 0x0a
|
||
|
|
#define REG_Shutter_Lower 0x0b
|
||
|
|
#define REG_Shutter_Upper 0x0c
|
||
|
|
#define REG_Frame_Period_Lower 0x0d
|
||
|
|
#define REG_Frame_Period_Upper 0x0e
|
||
|
|
#define REG_Configuration_I 0x0f
|
||
|
|
#define REG_Configuration_II 0x10
|
||
|
|
#define REG_Frame_Capture 0x12
|
||
|
|
#define REG_SROM_Enable 0x13
|
||
|
|
#define REG_Run_Downshift 0x14
|
||
|
|
#define REG_Rest1_Rate 0x15
|
||
|
|
#define REG_Rest1_Downshift 0x16
|
||
|
|
#define REG_Rest2_Rate 0x17
|
||
|
|
#define REG_Rest2_Downshift 0x18
|
||
|
|
#define REG_Rest3_Rate 0x19
|
||
|
|
#define REG_Frame_Period_Max_Bound_Lower 0x1a
|
||
|
|
#define REG_Frame_Period_Max_Bound_Upper 0x1b
|
||
|
|
#define REG_Frame_Period_Min_Bound_Lower 0x1c
|
||
|
|
#define REG_Frame_Period_Min_Bound_Upper 0x1d
|
||
|
|
#define REG_Shutter_Max_Bound_Lower 0x1e
|
||
|
|
#define REG_Shutter_Max_Bound_Upper 0x1f
|
||
|
|
#define REG_LASER_CTRL0 0x20
|
||
|
|
#define REG_Observation 0x24
|
||
|
|
#define REG_Data_Out_Lower 0x25
|
||
|
|
#define REG_Data_Out_Upper 0x26
|
||
|
|
#define REG_SROM_ID 0x2a
|
||
|
|
#define REG_Lift_Detection_Thr 0x2e
|
||
|
|
#define REG_Configuration_V 0x2f
|
||
|
|
#define REG_Configuration_IV 0x39
|
||
|
|
#define REG_Power_Up_Reset 0x3a
|
||
|
|
#define REG_Shutdown 0x3b
|
||
|
|
#define REG_Inverse_Product_ID 0x3f
|
||
|
|
#define REG_Motion_Burst 0x50
|
||
|
|
#define REG_SROM_Load_Burst 0x62
|
||
|
|
#define REG_Pixel_Burst 0x64
|
||
|
|
|
||
|
|
// pins
|
||
|
|
#define NCS F7
|
||
|
|
|
||
|
|
extern const uint16_t firmware_length;
|
||
|
|
extern const uint8_t firmware_data[];
|
||
|
|
|
||
|
|
enum motion_burst_propertr{
|
||
|
|
motion = 0,
|
||
|
|
observation,
|
||
|
|
delta_x_l,
|
||
|
|
delta_x_h,
|
||
|
|
delta_y_l,
|
||
|
|
delta_y_h,
|
||
|
|
squal,
|
||
|
|
pixel_sum,
|
||
|
|
maximum_pixel,
|
||
|
|
minimum_pixel,
|
||
|
|
shutter_upper,
|
||
|
|
shutter_lower,
|
||
|
|
frame_period_upper,
|
||
|
|
frame_period_lower,
|
||
|
|
end_data
|
||
|
|
};
|
||
|
|
|
||
|
|
void adns_begin(void){
|
||
|
|
spi_start(NCS, false, 3, 8);
|
||
|
|
}
|
||
|
|
|
||
|
|
void adns_end(void){
|
||
|
|
spi_stop();
|
||
|
|
}
|
||
|
|
|
||
|
|
void adns_write(uint8_t reg_addr, uint8_t data){
|
||
|
|
|
||
|
|
adns_begin();
|
||
|
|
//send address of the register, with MSBit = 1 to indicate it's a write
|
||
|
|
spi_write(reg_addr | 0x80 );
|
||
|
|
spi_write(data);
|
||
|
|
|
||
|
|
// tSCLK-NCS for write operation
|
||
|
|
wait_us(20);
|
||
|
|
|
||
|
|
|
||
|
|
// tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound
|
||
|
|
wait_us(100);
|
||
|
|
adns_end();
|
||
|
|
}
|
||
|
|
|
||
|
|
uint8_t adns_read(uint8_t reg_addr){
|
||
|
|
|
||
|
|
|
||
|
|
adns_begin();
|
||
|
|
// send adress of the register, with MSBit = 0 to indicate it's a read
|
||
|
|
spi_write(reg_addr & 0x7f );
|
||
|
|
uint8_t data = spi_read();
|
||
|
|
|
||
|
|
// tSCLK-NCS for read operation is 120ns
|
||
|
|
wait_us(1);
|
||
|
|
|
||
|
|
|
||
|
|
// tSRW/tSRR (=20us) minus tSCLK-NCS
|
||
|
|
wait_us(19);
|
||
|
|
|
||
|
|
adns_end();
|
||
|
|
return data;
|
||
|
|
}
|
||
|
|
|
||
|
|
void pointing_device_init(void) {
|
||
|
|
dprint("STARTING INTI\n");
|
||
|
|
|
||
|
|
spi_init();
|
||
|
|
// reset serial port
|
||
|
|
adns_begin();
|
||
|
|
adns_end();
|
||
|
|
|
||
|
|
// reboot
|
||
|
|
adns_write(REG_Power_Up_Reset, 0x5a);
|
||
|
|
wait_ms(50);
|
||
|
|
// read registers and discard
|
||
|
|
adns_read(REG_Motion);
|
||
|
|
adns_read(REG_Delta_X_L);
|
||
|
|
adns_read(REG_Delta_X_H);
|
||
|
|
adns_read(REG_Delta_Y_L);
|
||
|
|
adns_read(REG_Delta_Y_H);
|
||
|
|
|
||
|
|
// upload firmware
|
||
|
|
|
||
|
|
// set the configuration_IV register in 3k firmware mode
|
||
|
|
// bit 1 = 1 for 3k mode, other bits are reserved
|
||
|
|
adns_write(REG_Configuration_IV, 0x02);
|
||
|
|
|
||
|
|
// write 0x1d in SROM_enable reg for initializing
|
||
|
|
adns_write(REG_SROM_Enable, 0x1d);
|
||
|
|
|
||
|
|
// wait for more than one frame period
|
||
|
|
// assume that the frame rate is as low as 100fps... even if it should never be that low
|
||
|
|
wait_ms(10);
|
||
|
|
|
||
|
|
// write 0x18 to SROM_enable to start SROM download
|
||
|
|
adns_write(REG_SROM_Enable, 0x18);
|
||
|
|
|
||
|
|
// write the SROM file (=firmware data)
|
||
|
|
|
||
|
|
// write burst destination adress
|
||
|
|
adns_begin();
|
||
|
|
spi_write(REG_SROM_Load_Burst | 0x80);
|
||
|
|
wait_us(15);
|
||
|
|
// send all bytes of the firmware
|
||
|
|
unsigned char c;
|
||
|
|
for(int i = 0; i < firmware_length; i++){
|
||
|
|
c = (unsigned char)pgm_read_byte(firmware_data + i);
|
||
|
|
spi_write(c);
|
||
|
|
wait_us(15);
|
||
|
|
}
|
||
|
|
|
||
|
|
adns_end();
|
||
|
|
wait_ms(10);
|
||
|
|
|
||
|
|
// enable laser(bit 0 = 0b), in normal mode (bits 3,2,1 = 000b)
|
||
|
|
// reading the actual value of the register is important because the real
|
||
|
|
// default value is different from what is said in the datasheet, and if you
|
||
|
|
// change the reserved bytes (like by writing 0x00...) it would not work.
|
||
|
|
uint8_t laser_ctrl0 = adns_read(REG_LASER_CTRL0);
|
||
|
|
adns_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0);
|
||
|
|
|
||
|
|
wait_ms(1);
|
||
|
|
|
||
|
|
// set the configuration_I register to set the CPI
|
||
|
|
// 0x01 = 50, minimum
|
||
|
|
// 0x44 = 3400, default
|
||
|
|
// 0x8e = 7100
|
||
|
|
// 0xA4 = 8200, maximum
|
||
|
|
adns_write(REG_Configuration_I, 0x10);
|
||
|
|
|
||
|
|
wait_ms(100);
|
||
|
|
dprint("INIT ENDED\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
int16_t convertDeltaToInt(uint8_t high, uint8_t low){
|
||
|
|
|
||
|
|
// join bytes into twos compliment
|
||
|
|
//int16_t twos_comp = (high << 8) | low;
|
||
|
|
//return twos_comp;
|
||
|
|
return (high << 8) | low;
|
||
|
|
}
|
||
|
|
|
||
|
|
motion_delta_t readSensor(void) {
|
||
|
|
adns_begin();
|
||
|
|
|
||
|
|
// read from Motion_Burst to enable burt mode
|
||
|
|
spi_write(REG_Motion_Burst & 0x7f);
|
||
|
|
|
||
|
|
// Wait one frame per docs, thanks u/kbjunky
|
||
|
|
wait_us(100);
|
||
|
|
uint8_t burst_data[pixel_sum];
|
||
|
|
|
||
|
|
for (int i = 0; i < pixel_sum; ++i) {
|
||
|
|
burst_data[i] = spi_read();
|
||
|
|
}
|
||
|
|
|
||
|
|
uint16_t delta_x = convertDeltaToInt(burst_data[delta_x_h], burst_data[delta_x_l]);
|
||
|
|
uint16_t delta_y = convertDeltaToInt(burst_data[delta_y_h], burst_data[delta_y_l]);
|
||
|
|
// Only consider the MSB for motion as this byte has other status bits
|
||
|
|
uint8_t motion_ind = burst_data[motion] & 0b10000000;
|
||
|
|
adns_end();
|
||
|
|
|
||
|
|
motion_delta_t delta = {delta_x, delta_y, motion_ind};
|
||
|
|
return delta;
|
||
|
|
}
|
||
|
|
|
||
|
|
void pointing_device_task(void) {
|
||
|
|
motion_delta_t delta = readSensor();
|
||
|
|
|
||
|
|
report_mouse_t report = pointing_device_get_report();
|
||
|
|
|
||
|
|
if(delta.motion_ind) {
|
||
|
|
// clamp deltas from -127 to 127
|
||
|
|
report.x = delta.delta_x < -127 ? -127 : delta.delta_x > 127 ? 127 : delta.delta_x;
|
||
|
|
report.x = -report.x;
|
||
|
|
report.y = delta.delta_y < -127 ? -127 : delta.delta_y > 127 ? 127 : delta.delta_y;
|
||
|
|
}
|
||
|
|
|
||
|
|
pointing_device_set_report(report);
|
||
|
|
pointing_device_send();
|
||
|
|
}
|