qmk-firmware/keyboards/mechwild/puckbuddy/config.h

// Copyright 2022 Kyle McCreery (@kylemccreery)
// SPDX-License-Identifier: GPL-2.0-or-later

#pragma once

#include "config_common.h"

/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 4

/* Define custom font */
#define OLED_FONT_H "keyboards/mechwild/puckbuddy/glcdfont.c"

/* allows the "key" button on the blackpill to toggle caps lock for user testing before soldering */
#define DIP_SWITCH_PINS { A0 }

/* status light pins using the on board LED for the blackpill */
#define LED_CAPS_LOCK_PIN C13
#define LED_PIN_ON_STATE 0

/* set the tapping term for glidepoint pad to register a tap click */
//#define CIRQUE_PINNACLE_TAPPING_TERM 0 // This is set to 0 to disable it

/* TAPPING_TERM value is used for the CIRQUE_PINNACLE_TAPPING_TERM as well by default
 * defining it this way allows us to easily modify it with DYNAMIC_TAPPING_TERM_ENABLE
 */
#define TAPPING_TERM 0

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
#define MATRIX_ROW_PINS { B12, B13, B14, B15 }
#define MATRIX_COL_PINS { B10, A8, B4, B5 }
#define UNUSED_PINS

/* spi config */
#define SPI_DRIVER SPID1
#define SPI_SCK_PIN A5
#define SPI_SCK_PAL_MODE 5
#define SPI_MOSI_PIN A7
#define SPI_MOSI_PAL_MODE 5
#define SPI_MISO_PIN A6
#define SPI_MISO_PAL_MODE 5
#define CIRQUE_PINNACLE_SPI_DIVISOR 8
#define CIRQUE_PINNACLE_SPI_CS_PIN A4

/* encoder pins */
#define ENCODERS_PAD_A { B1, B3 }
#define ENCODERS_PAD_B { B0, A15 }

/* encoder resolution */
#define ENCODER_RESOLUTION 4
#define TAP_CODE_DELAY 10

/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW

/* RGB settings, uncomment this define to enable RGB */
#define RGB_DI_PIN A3
#ifdef RGB_DI_PIN
#    define RGBLED_NUM 3
#    define RGBLIGHT_HUE_STEP 8
#    define RGBLIGHT_SAT_STEP 8
#    define RGBLIGHT_VAL_STEP 8
#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#    define RGBLIGHT_EFFECT_BREATHING
#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#    define RGBLIGHT_EFFECT_SNAKE
#    define RGBLIGHT_EFFECT_KNIGHT
#    define RGBLIGHT_EFFECT_CHRISTMAS
#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
#    define RGBLIGHT_EFFECT_RGB_TEST
#    define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
#endif

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
 */
//#define GRAVE_ESC_CTRL_OVERRIDE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
//#define NO_DEBUG

/* disable print */
//#define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0