qmk-firmware/keyboards/latincompass/latin17rgb/config.h

 /* Copyright 2021 18438880
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */

#pragma once

/* USB Device descriptor parameter */
#include "config_common.h"
#define VENDOR_ID       0x7C88 // "hw" = haierwangwei2005
#define PRODUCT_ID      0x7C97 // "lp" = latin17RGB
#define DEVICE_VER      0x0001
#define MANUFACTURER    18438880
#define PRODUCT         Latin17RGB

/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 4

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
#define MATRIX_ROW_PINS {C7, C6, B6, B5, B4 }
#define MATRIX_COL_PINS {F7, F6, F5, F4}
#define UNUSED_PINS

/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 3

#ifdef RGB_MATRIX_ENABLE
#    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#    define RGB_MATRIX_KEYPRESSES
#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:
 // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
// #    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#    define ENABLE_RGB_MATRIX_BREATHING
// #    define ENABLE_RGB_MATRIX_BAND_SAT
#    define ENABLE_RGB_MATRIX_BAND_VAL
// #    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
// #    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#    define ENABLE_RGB_MATRIX_CYCLE_ALL
#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#    define ENABLE_RGB_MATRIX_DUAL_BEACON
#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
#    define ENABLE_RGB_MATRIX_RAINDROPS
#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
#    define ENABLE_RGB_MATRIX_HUE_BREATHING
#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
#    define ENABLE_RGB_MATRIX_HUE_WAVE
#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
#    define ENABLE_RGB_MATRIX_PIXEL_FLOW
#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
 // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
// #    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
 // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
// #    define ENABLE_RGB_MATRIX_SPLASH
// #    define ENABLE_RGB_MATRIX_MULTISPLASH
// #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
// #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH

 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:
 // 0b1110100 AD <-> GND
 // 0b1110111 AD <-> VCC
 // 0b1110101 AD <-> SCL
 // 0b1110110 AD <-> SDA
#    define DRIVER_ADDR_1 0b1110100
#    define DRIVER_ADDR_2 0b1110110

#    define DRIVER_COUNT 2
#    define DRIVER_1_LED_TOTAL 25
#    define DRIVER_2_LED_TOTAL 24
#    define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

#endif
#define RGB_DI_PIN B7
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 8
#define RGBLIGHT_HUE_STEP 5
#define RGBLIGHT_SAT_STEP 5
#define RGBLIGHT_VAL_STEP 5
#define RGBLIGHT_SLEEP
#endif