qmk-firmware/lib/usbhost/USB_Host_Shield_2.0/PS4Parser.cpp

/* Copyright (C) 2014 Kristian Lauszus, TKJ Electronics. All rights reserved.

 This software may be distributed and modified under the terms of the GNU
 General Public License version 2 (GPL2) as published by the Free Software
 Foundation and appearing in the file GPL2.TXT included in the packaging of
 this file. Please note that GPL2 Section 2[b] requires that all works based
 on this software must also be made publicly available under the terms of
 the GPL2 ("Copyleft").

 Contact information
 -------------------

 Kristian Lauszus, TKJ Electronics
 Web      :  http://www.tkjelectronics.com
 e-mail   :  kristianl@tkjelectronics.com
 */

#include "PS4Parser.h"

// To enable serial debugging see "settings.h"
//#define PRINTREPORT // Uncomment to print the report send by the PS4 Controller

bool PS4Parser::checkDpad(ButtonEnum b) {
        switch (b) {
                case UP:
                        return ps4Data.btn.dpad == DPAD_LEFT_UP || ps4Data.btn.dpad == DPAD_UP || ps4Data.btn.dpad == DPAD_UP_RIGHT;
                case RIGHT:
                        return ps4Data.btn.dpad == DPAD_UP_RIGHT || ps4Data.btn.dpad == DPAD_RIGHT || ps4Data.btn.dpad == DPAD_RIGHT_DOWN;
                case DOWN:
                        return ps4Data.btn.dpad == DPAD_RIGHT_DOWN || ps4Data.btn.dpad == DPAD_DOWN || ps4Data.btn.dpad == DPAD_DOWN_LEFT;
                case LEFT:
                        return ps4Data.btn.dpad == DPAD_DOWN_LEFT || ps4Data.btn.dpad == DPAD_LEFT || ps4Data.btn.dpad == DPAD_LEFT_UP;
                default:
                        return false;
        }
}

bool PS4Parser::getButtonPress(ButtonEnum b) {
        if (b <= LEFT) // Dpad
                return checkDpad(b);
        else
                return ps4Data.btn.val & (1UL << pgm_read_byte(&PS4_BUTTONS[(uint8_t)b]));
}

bool PS4Parser::getButtonClick(ButtonEnum b) {
        uint32_t mask = 1UL << pgm_read_byte(&PS4_BUTTONS[(uint8_t)b]);
        bool click = buttonClickState.val & mask;
        buttonClickState.val &= ~mask; // Clear "click" event
        return click;
}

uint8_t PS4Parser::getAnalogButton(ButtonEnum b) {
        if (b == L2) // These are the only analog buttons on the controller
                return ps4Data.trigger[0];
        else if (b == R2)
                return ps4Data.trigger[1];
        return 0;
}

uint8_t PS4Parser::getAnalogHat(AnalogHatEnum a) {
        return ps4Data.hatValue[(uint8_t)a];
}

void PS4Parser::Parse(uint8_t len, uint8_t *buf) {
        if (len > 1 && buf)  {
#ifdef PRINTREPORT
                Notify(PSTR("\r\n"), 0x80);
                for (uint8_t i = 0; i < len; i++) {
                        D_PrintHex<uint8_t > (buf[i], 0x80);
                        Notify(PSTR(" "), 0x80);
                }
#endif

                if (buf[0] == 0x01) // Check report ID
                        memcpy(&ps4Data, buf + 1, min((uint8_t)(len - 1), sizeof(ps4Data)));
                else if (buf[0] == 0x11) { // This report is send via Bluetooth, it has an offset of 2 compared to the USB data
                        if (len < 4) {
#ifdef DEBUG_USB_HOST
                                Notify(PSTR("\r\nReport is too short: "), 0x80);
                                D_PrintHex<uint8_t > (len, 0x80);
#endif
                                return;
                        }
                        memcpy(&ps4Data, buf + 3, min((uint8_t)(len - 3), sizeof(ps4Data)));
                } else {
#ifdef DEBUG_USB_HOST
                        Notify(PSTR("\r\nUnknown report id: "), 0x80);
                        D_PrintHex<uint8_t > (buf[0], 0x80);
#endif
                        return;
                }

                if (ps4Data.btn.val != oldButtonState.val) { // Check if anything has changed
                        buttonClickState.val = ps4Data.btn.val & ~oldButtonState.val; // Update click state variable
                        oldButtonState.val = ps4Data.btn.val;

                        // The DPAD buttons does not set the different bits, but set a value corresponding to the buttons pressed, we will simply set the bits ourself
                        uint8_t newDpad = 0;
                        if (checkDpad(UP))
                                newDpad |= 1 << UP;
                        if (checkDpad(RIGHT))
                                newDpad |= 1 << RIGHT;
                        if (checkDpad(DOWN))
                                newDpad |= 1 << DOWN;
                        if (checkDpad(LEFT))
                                newDpad |= 1 << LEFT;
                        if (newDpad != oldDpad) {
                                buttonClickState.dpad = newDpad & ~oldDpad; // Override values
                                oldDpad = newDpad;
                        }
                }
        }

        if (ps4Output.reportChanged)
                sendOutputReport(&ps4Output); // Send output report
}