qmk-firmware/keyboards/keyboardio/model01/rules.mk

# Build Options
#   change yes to no to disable
#
BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes      # Mouse keys
EXTRAKEY_ENABLE = yes       # Audio control and System control
CONSOLE_ENABLE = yes        # Console for debug
COMMAND_ENABLE = no        # Commands for debug and configuration
NKRO_ENABLE = no            # Enable N-Key Rollover

CUSTOM_MATRIX = yes
QUANTUM_LIB_SRC += i2c_master.c
SRC += leds.c \
	   matrix.c

# You can set RGB_MATRIX_ENABLE = no in your rules.mk to disable this and save the Flash
RGB_MATRIX_ENABLE = yes # Enable RGB matrix effects.
Keyboard: add Keyboardio Model 01 (#3900) * Keyboard: add Keyboardio Model01 This port implements key scanning and everything in their default keymap. It doesn't implement mouse warping; QMK can't do that (yet). LED control is mostly not implemented. The ability to set all LEDs is included because they can get stuck on coming from the bootloader otherwise. Single LED control is also implemented for numpad indication. The scanners also support batch LED transfer which is what you'd need if you wanted to do fast effects. Gamma correction is also not implemented, but is present in the original firmware. The necessary info for further implementation is in the KeyboardioScanner module for Kaleidoscope. To install on your keyboard: make model01:avrdude When prompted, hold the "prog" key on the keyboard to put it into programming mode. This can also be achieved by holding the "prog" key while plugging in the keyboard. This works even if the firmware is corrupt or missing. Hot plugging the halves seems to work fine, but there is no explicit support for eg. making sure the matrix scan rate is reconfigured. * model01: clean up includes and include guards Uses #pragma once everywhere. * model01: split LED and matrix code This makes space if someone wants to implement better LED support later on, the keyboard is a lot more capable than the current code. * model01: separate I2C timeouts for matrix vs. LED If the scanners have no data they don't ACK reads and just time out. So we want a pretty short timeout to keep scan rates high. Meanwhile the LED transfers might take longer - I don't know though, so here we are conservative. * model01: implement better LED control - gamma correction from the manufacturer's firmware - suitable delays to allow back to back LED writes - this is fast enough to write the whole keyboard without noticeable delay, in my experience - minor bug fix: RHS Fn key was not addressable * model01: add license to wire-protocol-constants.h * model01: replace gamma LUT The original was of unclear license origin. This one is functionally identical and includes a generator should people wish to adjust it. * model01: use the already-present CIE1931 lightness curve ...rather than baking in another gamma curve. It's said that CIE1931 is the right thing to be using rather than gamma. OK. Let it be so. * model01: call matrix_init_user() from matrix_init_kb() * model01: remove inapplicable config options from rules.mk * model01: readme.md: update build environment links 2018-09-18 00:49:20 +02:00			`# Build Options`
			`# change yes to no to disable`
			`#`
Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta 2021-08-07 08:59:56 +02:00			`BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite`
Remove filesize changes from default-ish rules.mk files, sans handwired (#8040) 2020-01-30 19:47:48 +01:00			`MOUSEKEY_ENABLE = yes # Mouse keys`
			`EXTRAKEY_ENABLE = yes # Audio control and System control`
			`CONSOLE_ENABLE = yes # Console for debug`
Keyboard: add Keyboardio Model 01 (#3900) * Keyboard: add Keyboardio Model01 This port implements key scanning and everything in their default keymap. It doesn't implement mouse warping; QMK can't do that (yet). LED control is mostly not implemented. The ability to set all LEDs is included because they can get stuck on coming from the bootloader otherwise. Single LED control is also implemented for numpad indication. The scanners also support batch LED transfer which is what you'd need if you wanted to do fast effects. Gamma correction is also not implemented, but is present in the original firmware. The necessary info for further implementation is in the KeyboardioScanner module for Kaleidoscope. To install on your keyboard: make model01:avrdude When prompted, hold the "prog" key on the keyboard to put it into programming mode. This can also be achieved by holding the "prog" key while plugging in the keyboard. This works even if the firmware is corrupt or missing. Hot plugging the halves seems to work fine, but there is no explicit support for eg. making sure the matrix scan rate is reconfigured. * model01: clean up includes and include guards Uses #pragma once everywhere. * model01: split LED and matrix code This makes space if someone wants to implement better LED support later on, the keyboard is a lot more capable than the current code. * model01: separate I2C timeouts for matrix vs. LED If the scanners have no data they don't ACK reads and just time out. So we want a pretty short timeout to keep scan rates high. Meanwhile the LED transfers might take longer - I don't know though, so here we are conservative. * model01: implement better LED control - gamma correction from the manufacturer's firmware - suitable delays to allow back to back LED writes - this is fast enough to write the whole keyboard without noticeable delay, in my experience - minor bug fix: RHS Fn key was not addressable * model01: add license to wire-protocol-constants.h * model01: replace gamma LUT The original was of unclear license origin. This one is functionally identical and includes a generator should people wish to adjust it. * model01: use the already-present CIE1931 lightness curve ...rather than baking in another gamma curve. It's said that CIE1931 is the right thing to be using rather than gamma. OK. Let it be so. * model01: call matrix_init_user() from matrix_init_kb() * model01: remove inapplicable config options from rules.mk * model01: readme.md: update build environment links 2018-09-18 00:49:20 +02:00			`COMMAND_ENABLE = no # Commands for debug and configuration`
Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 06:05:44 +01:00			`NKRO_ENABLE = no # Enable N-Key Rollover`
Keyboard: add Keyboardio Model 01 (#3900) * Keyboard: add Keyboardio Model01 This port implements key scanning and everything in their default keymap. It doesn't implement mouse warping; QMK can't do that (yet). LED control is mostly not implemented. The ability to set all LEDs is included because they can get stuck on coming from the bootloader otherwise. Single LED control is also implemented for numpad indication. The scanners also support batch LED transfer which is what you'd need if you wanted to do fast effects. Gamma correction is also not implemented, but is present in the original firmware. The necessary info for further implementation is in the KeyboardioScanner module for Kaleidoscope. To install on your keyboard: make model01:avrdude When prompted, hold the "prog" key on the keyboard to put it into programming mode. This can also be achieved by holding the "prog" key while plugging in the keyboard. This works even if the firmware is corrupt or missing. Hot plugging the halves seems to work fine, but there is no explicit support for eg. making sure the matrix scan rate is reconfigured. * model01: clean up includes and include guards Uses #pragma once everywhere. * model01: split LED and matrix code This makes space if someone wants to implement better LED support later on, the keyboard is a lot more capable than the current code. * model01: separate I2C timeouts for matrix vs. LED If the scanners have no data they don't ACK reads and just time out. So we want a pretty short timeout to keep scan rates high. Meanwhile the LED transfers might take longer - I don't know though, so here we are conservative. * model01: implement better LED control - gamma correction from the manufacturer's firmware - suitable delays to allow back to back LED writes - this is fast enough to write the whole keyboard without noticeable delay, in my experience - minor bug fix: RHS Fn key was not addressable * model01: add license to wire-protocol-constants.h * model01: replace gamma LUT The original was of unclear license origin. This one is functionally identical and includes a generator should people wish to adjust it. * model01: use the already-present CIE1931 lightness curve ...rather than baking in another gamma curve. It's said that CIE1931 is the right thing to be using rather than gamma. OK. Let it be so. * model01: call matrix_init_user() from matrix_init_kb() * model01: remove inapplicable config options from rules.mk * model01: readme.md: update build environment links 2018-09-18 00:49:20 +02:00
			`CUSTOM_MATRIX = yes`
Cleanup rules.mk for 32U4 keyboards, L-M (#7120) * Cleanup rules.mk for 32U4 keyboards, L-M * Move some stuff to keyboard level 2019-10-24 22:50:13 +02:00			`QUANTUM_LIB_SRC += i2c_master.c`
			`SRC += leds.c \`
			`matrix.c`
Keyboard: keyboardio model01: rgbmatrix support (#3989) * model01: implement RGB matrix feature LEDs can still be individually controlled if this is switched off. * model01: use fast banked LED setting commands * model01: update default keymap to use RGB matrix * model01: update RGB matrix support to match common_features.mk * rgb_matrix: include <string.h> This was missing after commit 4d5705ea6ceeb11cd2adc018644ec87c51af4e86 which introduces a use of memset(). * model01: make g_rgb_leds weak This allows users to override which LEDs are configured as modifiers, or tweak the x/y coordinates, should they so choose. 2018-09-28 05:53:36 +02:00
			`# You can set RGB_MATRIX_ENABLE = no in your rules.mk to disable this and save the Flash`
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change 2020-11-28 21:02:18 +01:00			`RGB_MATRIX_ENABLE = yes # Enable RGB matrix effects.`