qmk-firmware/keyboards/wekey/we27/config.h

/*
Copyright 2021 @wekey

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#include "config_common.h"

/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 5

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
#define MATRIX_ROW_PINS { F1, D7, B4, B5, B6, F6 }
#define MATRIX_COL_PINS { F4, F5, C7, D6, D4 }

/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW

/*
 * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
 */
// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6

#ifdef RGB_MATRIX_ENABLE
// The pin connected to the data pin of the LEDs
#define RGB_DI_PIN C6
// The number of LEDs connected
#define RGB_MATRIX_LED_COUNT 27

#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_MATRIX_DEFAULT_HUE 108 // Sets the default hue value, if none has been set
#define RGB_MATRIX_DEFAULT_SAT 255 // Sets the default saturation value, if none has been set
#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
#define RGB_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set
#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR // Sets the default mode, if none has been set

// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
// #    define ENABLE_RGB_MATRIX_ALPHAS_MODS
// #    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
// #    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
// #    define ENABLE_RGB_MATRIX_BREATHING
// #    define ENABLE_RGB_MATRIX_BAND_SAT
// #    define ENABLE_RGB_MATRIX_BAND_VAL
// #    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
// #    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
// #    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
// #    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
// #    define ENABLE_RGB_MATRIX_CYCLE_ALL
// #    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
// #    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
// #    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
// #    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
// #    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
// #    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
// #    define ENABLE_RGB_MATRIX_DUAL_BEACON
// #    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
// #    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
// #    define ENABLE_RGB_MATRIX_RAINDROPS
// #    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
// #    define ENABLE_RGB_MATRIX_HUE_BREATHING
// #    define ENABLE_RGB_MATRIX_HUE_PENDULUM
// #    define ENABLE_RGB_MATRIX_HUE_WAVE
// #    define ENABLE_RGB_MATRIX_PIXEL_RAIN
// #    define ENABLE_RGB_MATRIX_PIXEL_FLOW
// #    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
// #    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
// #    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
// #    define ENABLE_RGB_MATRIX_SPLASH
// #    define ENABLE_RGB_MATRIX_MULTISPLASH
// #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
// #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH

#endif

#ifdef ENCODER_ENABLE
#define ENCODERS_PAD_A { D3 }
#    define ENCODERS_PAD_B \
        { D2 }
#    define ENCODER_RESOLUTION 2

#    define ENCODERS 1
#    define ENCODERS_CW_KEY           \
        {                             \
            { 4, 5 }                  \
        }
#define ENCODERS_CCW_KEY { { 4, 3 } }
#endif

//#define LED_NUM_LOCK_PIN B0
//#define LED_CAPS_LOCK_PIN B1
//#define LED_SCROLL_LOCK_PIN B2
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4

//#define BACKLIGHT_PIN B7
//#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING

//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//#    define RGBLED_NUM 16
//#    define RGBLIGHT_HUE_STEP 8
//#    define RGBLIGHT_SAT_STEP 8
//#    define RGBLIGHT_VAL_STEP 8
//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
//#endif

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
 */
//#define GRAVE_ESC_CTRL_OVERRIDE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
//#define NO_DEBUG

/* disable print */
//#define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0