321 lines
14 KiB
Makefile
321 lines
14 KiB
Makefile
.PHONY: \
|
|
build-feather \
|
|
circuitpy-deps \
|
|
circuitpy-freeze-kmk-nrf \
|
|
devdeps \
|
|
freeze-nrf-build-deps \
|
|
lint
|
|
|
|
AMPY_PORT ?= /dev/ttyUSB0
|
|
AMPY_BAUD ?= 115200
|
|
AMPY_DELAY ?= 1.5
|
|
ARDUINO ?= /usr/share/arduino
|
|
PIPENV ?= $(shell which pipenv)
|
|
|
|
.devdeps: Pipfile.lock
|
|
@$(PIPENV) install --dev --ignore-pipfile
|
|
@touch .devdeps
|
|
|
|
devdeps: .devdeps
|
|
|
|
lint: devdeps
|
|
@$(PIPENV) run flake8
|
|
|
|
fix-isort: devdeps
|
|
@find kmk/ user_keymaps/ -name "*.py" | xargs $(PIPENV) run isort
|
|
|
|
clean:
|
|
rm -rf .submodules .circuitpy-deps .micropython-deps build
|
|
|
|
powerwash: clean
|
|
rm -rf vendor
|
|
$(PIPENV) --rm
|
|
|
|
test: micropython-build-unix
|
|
@echo "===> Testing keymap_sanity_check.py script"
|
|
@echo " --> Known good layout should pass..."
|
|
@MICROPYPATH=tests/test_data:./ ./bin/micropython.sh bin/keymap_sanity_check.py keymaps/known_good.py
|
|
@echo " --> Layer with ghosted MO should fail..."
|
|
@MICROPYPATH=tests/test_data:./ ./bin/micropython.sh bin/keymap_sanity_check.py keymaps/ghosted_layer_mo.py 2>/dev/null && exit 1 || exit 0
|
|
@echo " --> Sharing a pin between rows/cols should fail..."
|
|
@MICROPYPATH=tests/test_data:./ ./bin/micropython.sh bin/keymap_sanity_check.py keymaps/duplicated_pins_between_row_col.py 2>/dev/null && exit 1 || exit 0
|
|
@echo " --> Sharing a pin between two rows should fail..."
|
|
@MICROPYPATH=tests/test_data:./ ./bin/micropython.sh bin/keymap_sanity_check.py keymaps/duplicate_row_pins.py 2>/dev/null && exit 1 || exit 0
|
|
@echo "===> The sanity checker is sane, unlike klardotsh"
|
|
|
|
.submodules: .gitmodules submodules.toml
|
|
@echo "===> Pulling dependencies, this may take several minutes"
|
|
@git submodule sync
|
|
@git submodule update --init --recursive
|
|
@rsync -ah vendor/ build/
|
|
@touch .submodules
|
|
|
|
.circuitpy-deps: .submodules
|
|
@echo "===> Building circuitpython/mpy-cross"
|
|
@make -C build/circuitpython/mpy-cross
|
|
@echo "===> Pulling Nordic BLE stack"
|
|
@cd build/circuitpython/ports/nrf && ./drivers/bluetooth/download_ble_stack.sh 2>/dev/null >/dev/null
|
|
@touch .circuitpy-deps
|
|
|
|
.micropython-deps: .submodules
|
|
@echo "===> Building micropython/mpy-cross"
|
|
@make -C build/micropython/mpy-cross
|
|
@touch .micropython-deps
|
|
|
|
submodules: .submodules
|
|
circuitpy-deps: .circuitpy-deps
|
|
micropython-deps: .micropython-deps
|
|
|
|
build/micropython/ports/unix/micropython: micropython-deps build/micropython/ports/unix/modules/.kmk_frozen
|
|
@make -j4 -C build/micropython/ports/unix
|
|
|
|
micropython-build-unix: build/micropython/ports/unix/micropython
|
|
|
|
freeze-atmel-samd-build-deps: build/circuitpython/ports/atmel-samd/modules/.kmk_frozen
|
|
freeze-nrf-build-deps: build/circuitpython/ports/nrf/freeze/.kmk_frozen
|
|
freeze-teensy3.1-build-deps: build/micropython/ports/teensy/freeze/.kmk_frozen
|
|
freeze-stm32-build-deps: build/micropython/ports/stm32/freeze/.kmk_frozen
|
|
|
|
build/micropython/ports/unix/modules/.kmk_frozen: upy-freeze.txt submodules.toml
|
|
@echo "===> Preparing builded dependencies for local development"
|
|
@rm -rf build/micropython/ports/unix/freeze/*
|
|
@cat $< | egrep -v '(^#|^\s*$|^\s*\t*#)' | grep MICROPY | cut -d'|' -f2- | \
|
|
xargs -I '{}' cp -a {} build/micropython/ports/unix/freeze/
|
|
@touch $@
|
|
|
|
build/circuitpython/ports/atmel-samd/modules/.kmk_frozen: upy-freeze.txt submodules.toml
|
|
@echo "===> Preparing builded dependencies for bundling"
|
|
@rm -rf build/circuitpython/ports/atmel-samd/modules/*
|
|
@cat $< | egrep -v '(^#|^\s*$|^\s*\t*#)' | grep CIRCUITPY | cut -d'|' -f2- | \
|
|
xargs -I '{}' cp -a {} build/circuitpython/ports/atmel-samd/modules/
|
|
@touch $@
|
|
|
|
build/circuitpython/ports/nrf/freeze/.kmk_frozen: upy-freeze.txt submodules.toml
|
|
@echo "===> Preparing builded dependencies for bundling"
|
|
@rm -rf build/circuitpython/ports/nrf/freeze/*
|
|
@cat $< | egrep -v '(^#|^\s*$|^\s*\t*#)' | grep CIRCUITPY | cut -d'|' -f2- | \
|
|
xargs -I '{}' cp -a {} build/circuitpython/ports/nrf/freeze/
|
|
@touch $@
|
|
|
|
build/micropython/ports/teensy/freeze/.kmk_frozen: upy-freeze.txt submodules.toml
|
|
@echo "===> Preparing builded dependencies for bundling"
|
|
@mkdir -p build/micropython/ports/teensy/freeze/
|
|
@rm -rf build/micropython/ports/teensy/freeze/*
|
|
@cat $< | egrep -v '(^#|^\s*$|^\s*\t*#)' | grep MICROPY | cut -d'|' -f2- | \
|
|
xargs -I '{}' cp -a {} build/circuitpython/ports/teensy/freeze/
|
|
@touch $@
|
|
|
|
build/micropython/ports/stm32/freeze/.kmk_frozen: upy-freeze.txt submodules.toml
|
|
@echo "===> Preparing builded dependencies for bundling"
|
|
@mkdir -p build/micropython/ports/stm32/freeze/
|
|
@rm -rf build/micropython/ports/stm32/freeze/*
|
|
@cat $< | egrep -v '(^#|^\s*$|^\s*\t*#)' | grep MICROPY | cut -d'|' -f2- | \
|
|
xargs -I '{}' cp -a {} build/micropython/ports/stm32/freeze/
|
|
@touch $@
|
|
|
|
circuitpy-freeze-kmk-atmel-samd: freeze-atmel-samd-build-deps
|
|
@echo "===> Preparing KMK source for bundling into CircuitPython"
|
|
@rm -rf build/circuitpython/ports/atmel-samd/modules/kmk*
|
|
@cp -av kmk build/circuitpython/ports/atmel-samd/modules/
|
|
|
|
circuitpy-freeze-kmk-nrf: freeze-nrf-build-deps
|
|
@echo "===> Preparing KMK source for bundling into CircuitPython"
|
|
@rm -rf build/circuitpython/ports/nrf/kmk*
|
|
@cp -av kmk build/circuitpython/ports/nrf/freeze/
|
|
|
|
micropython-freeze-kmk-teensy3.1: freeze-teensy3.1-build-deps
|
|
@echo "===> Preparing KMK source for bundling into MicroPython"
|
|
@rm -rf build/micropython/ports/teensy/kmk*
|
|
@cp -av kmk build/micropython/ports/teensy/memzip_files/
|
|
|
|
micropython-freeze-kmk-stm32: freeze-stm32-build-deps
|
|
@echo "===> Preparing KMK source for bundling into MicroPython"
|
|
@rm -rf build/micropython/ports/stm32/freeze/kmk*
|
|
@cp -av kmk build/micropython/ports/stm32/freeze/
|
|
|
|
circuitpy-build-feather-m4-express:
|
|
@echo "===> Building CircuitPython"
|
|
@make -C build/circuitpython/ports/atmel-samd BOARD=feather_m4_express FROZEN_MPY_DIRS="modules" clean all
|
|
|
|
circuitpy-build-itsybitsy-m4-express:
|
|
@echo "===> Building CircuitPython"
|
|
@make -C build/circuitpython/ports/atmel-samd BOARD=itsybitsy_m4_express FROZEN_MPY_DIRS="modules" clean all
|
|
|
|
circuitpy-build-nrf:
|
|
@echo "===> Building CircuitPython"
|
|
@make -C build/circuitpython/ports/nrf BOARD=feather_nrf52832 SERIAL=${AMPY_PORT} SD=s132 FROZEN_MPY_DIR=freeze clean all
|
|
|
|
circuitpy-flash-feather-m4-express:
|
|
@echo "Flashing not available for Feather M4 Express over bossa right now"
|
|
@echo "First, double tap the reset button on the Feather. You should see a red light near the USB port"
|
|
@echo "Then, find and (if necessary) mount the USB drive that will show up (should be about 4MB)"
|
|
@echo "Copy build/circuitpython/ports/atmel-samd/build-feather_m4_express/firmware.uf2 to this device"
|
|
@echo "The device will auto-reboot. You may need to forcibly unmount the drive on Linuxes, with umount -f path/to/mountpoint"
|
|
|
|
circuitpy-flash-itsybitsy-m4-express:
|
|
@echo "Flashing not available for ItsyBitsy M4 Express over bossa right now"
|
|
@echo "First, double tap the reset button on the ItsyBitsy. You should see a red light near the USB port"
|
|
@echo "Then, find and (if necessary) mount the USB drive that will show up (should be about 4MB)"
|
|
@echo "Copy build/circuitpython/ports/atmel-samd/build-itsybitsy_m4_express/firmware.uf2 to this device"
|
|
@echo "The device will auto-reboot. You may need to forcibly unmount the drive on Linuxes, with umount -f path/to/mountpoint"
|
|
|
|
circuitpy-flash-nrf: circuitpy-build-nrf
|
|
@echo "===> Flashing CircuitPython with KMK and your keymap"
|
|
@make -C build/circuitpython/ports/nrf BOARD=feather_nrf52832 SERIAL=${AMPY_PORT} SD=s132 FROZEN_MPY_DIR=freeze dfu-gen dfu-flash
|
|
|
|
micropython-build-teensy3.1:
|
|
@make -C build/micropython/ports/teensy/ BOARD=TEENSY_3.1 all
|
|
|
|
micropython-flash-teensy3.1: micropython-build-teensy3.1
|
|
@make -C build/micropython/ports/teensy/ BOARD=TEENSY_3.1 deploy
|
|
|
|
micropython-build-pyboard:
|
|
@make -j4 -C build/micropython/ports/stm32/ BOARD=PYBV11 FROZEN_MPY_DIR=freeze all
|
|
|
|
micropython-flash-pyboard: micropython-build-pyboard
|
|
@make -j4 -C build/micropython/ports/stm32/ BOARD=PYBV11 FROZEN_MPY_DIR=freeze deploy
|
|
|
|
circuitpy-flash-nrf-entrypoint:
|
|
@echo "===> Flashing entrypoint if it doesn't already exist"
|
|
@sleep 2
|
|
@-timeout -k 5s 10s $(PIPENV) run ampy -p ${AMPY_PORT} -d ${AMPY_DELAY} -b ${AMPY_BAUD} rm main.py 2>/dev/null
|
|
@-timeout -k 5s 10s $(PIPENV) run ampy -p ${AMPY_PORT} -d ${AMPY_DELAY} -b ${AMPY_BAUD} put entrypoints/feather_nrf52832.py main.py
|
|
@echo "===> Flashed keyboard successfully!"
|
|
|
|
ifndef USER_KEYMAP
|
|
build-feather-m4-express:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
|
|
flash-feather-m4-express:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
else
|
|
ifndef SKIP_KEYMAP_VALIDATION
|
|
build-feather-m4-express: lint devdeps circuitpy-deps circuitpy-freeze-kmk-atmel-samd
|
|
else
|
|
build-feather-m4-express: lint devdeps circuitpy-deps circuitpy-freeze-kmk-atmel-samd micropython-build-unix
|
|
endif
|
|
@echo "===> Preparing keyboard script for bundling into CircuitPython"
|
|
ifndef SKIP_KEYMAP_VALIDATION
|
|
@MICROPYPATH=./ ./bin/micropython.sh bin/keymap_sanity_check.py ${USER_KEYMAP}
|
|
endif
|
|
@cp -av ${USER_KEYMAP} build/circuitpython/ports/atmel-samd/modules/kmk_keyboard_user.py
|
|
@$(MAKE) circuitpy-build-feather-m4-express
|
|
|
|
flash-feather-m4-express: lint devdeps circuitpy-deps circuitpy-freeze-kmk-atmel-samd
|
|
@echo "===> Preparing keyboard script for bundling into CircuitPython"
|
|
@$(MAKE) build-feather-m4-express circuitpy-flash-feather-m4-express
|
|
endif
|
|
|
|
ifndef USER_KEYMAP
|
|
build-feather-nrf52832:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
|
|
flash-feather-nrf52832:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
else
|
|
build-feather-nrf52832: lint devdeps circuitpy-deps circuitpy-freeze-kmk-nrf
|
|
@echo "===> Preparing keyboard script for bundling into CircuitPython"
|
|
@cp -av ${USER_KEYMAP} build/circuitpython/ports/nrf/freeze/kmk_keyboard_user.py
|
|
@$(MAKE) circuitpy-build-nrf
|
|
|
|
flash-feather-nrf52832: lint devdeps circuitpy-deps circuitpy-freeze-kmk-nrf
|
|
@echo "===> Preparing keyboard script for bundling into CircuitPython"
|
|
@cp -av ${USER_KEYMAP} build/circuitpython/ports/nrf/freeze/kmk_keyboard_user.py
|
|
@$(MAKE) circuitpy-flash-nrf circuitpy-flash-nrf-entrypoint
|
|
endif
|
|
|
|
ifndef USER_KEYMAP
|
|
build-itsybitsy-m4-express:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
|
|
flash-itsybitsy-m4-express:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
else
|
|
ifndef SKIP_KEYMAP_VALIDATION
|
|
build-itsybitsy-m4-express: lint devdeps circuitpy-deps circuitpy-freeze-kmk-atmel-samd
|
|
else
|
|
build-itsybitsy-m4-express: lint devdeps circuitpy-deps circuitpy-freeze-kmk-atmel-samd micropython-build-unix
|
|
endif
|
|
@echo "===> Preparing keyboard script for bundling into CircuitPython"
|
|
ifndef SKIP_KEYMAP_VALIDATION
|
|
@MICROPYPATH=./ ./bin/micropython.sh bin/keymap_sanity_check.py ${USER_KEYMAP}
|
|
endif
|
|
@cp -av ${USER_KEYMAP} build/circuitpython/ports/atmel-samd/modules/kmk_keyboard_user.py
|
|
@$(MAKE) circuitpy-build-itsybitsy-m4-express
|
|
|
|
flash-itsybitsy-m4-express: lint devdeps circuitpy-deps circuitpy-freeze-kmk-atmel-samd
|
|
@echo "===> Preparing keyboard script for bundling into CircuitPython"
|
|
@$(MAKE) build-itsybitsy-m4-express circuitpy-flash-itsybitsy-m4-express
|
|
endif
|
|
|
|
ifndef USER_KEYMAP
|
|
build-teensy-3.1:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
|
|
flash-teensy-3.1:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
else
|
|
build-teensy-3.1: lint devdeps micropython-deps micropython-freeze-kmk-teensy3.1
|
|
@echo "===> Preparing keyboard script for bundling into MicroPython"
|
|
@cp -av ${USER_KEYMAP} build/micropython/ports/teensy/freeze/kmk_keyboard_user.py
|
|
@$(MAKE) ARDUINO=${ARDUINO} micropython-build-teensy3.1
|
|
|
|
flash-teensy-3.1: lint devdeps micropython-deps micropython-freeze-kmk-teensy3.1
|
|
@echo "===> Preparing keyboard script for bundling into MicroPython"
|
|
@cp -av ${USER_KEYMAP} build/micropython/ports/teensy/freeze/kmk_keyboard_user.py
|
|
@$(MAKE) ARDUINO=${ARDUINO} micropython-flash-teensy3.1
|
|
endif
|
|
|
|
ifndef USER_KEYMAP
|
|
build-pyboard:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
|
|
flash-pyboard:
|
|
@echo "===> Must provide a USER_KEYMAP (usually from user_keymaps/...) to build!" && exit 1
|
|
else
|
|
ifndef SKIP_KEYMAP_VALIDATION
|
|
build-pyboard: lint devdeps micropython-deps micropython-freeze-kmk-stm32 micropython-build-unix
|
|
else
|
|
build-pyboard: lint devdeps micropython-deps micropython-freeze-kmk-stm32
|
|
endif
|
|
@echo "===> Preparing keyboard script for bundling into MicroPython"
|
|
ifndef SKIP_KEYMAP_VALIDATION
|
|
@MICROPYPATH=./ ./bin/micropython.sh bin/keymap_sanity_check.py ${USER_KEYMAP}
|
|
endif
|
|
@cp -av ${USER_KEYMAP} build/micropython/ports/stm32/freeze/kmk_keyboard_user.py
|
|
@$(MAKE) AMPY_PORT=/dev/ttyACM0 AMPY_BAUD=115200 micropython-build-pyboard
|
|
|
|
flash-pyboard: lint devdeps micropython-deps micropython-freeze-kmk-stm32
|
|
@echo "===> Preparing keyboard script for bundling into MicroPython"
|
|
@cp -av ${USER_KEYMAP} build/micropython/ports/stm32/freeze/kmk_keyboard_user.py
|
|
@cp -av kmk/entrypoints/global.py build/micropython/ports/stm32/freeze/_main.py
|
|
@cp -av kmk/entrypoints/handwire/pyboard_boot.py build/micropython/ports/stm32/freeze/_boot.py
|
|
@$(MAKE) micropython-flash-pyboard
|
|
endif
|
|
|
|
reset-bootloader:
|
|
@-timeout -k 5s 10s $(PIPENV) run ampy -p /dev/ttyACM0 -d ${AMPY_DELAY} -b ${AMPY_BAUD} run util/bootloader.py
|
|
|
|
reset-board:
|
|
@-timeout -k 5s 10s $(PIPENV) run ampy -p /dev/ttyACM0 -d ${AMPY_DELAY} -b ${AMPY_BAUD} run util/reset.py
|
|
|
|
# Fully wipe the board with only stock CircuitPython
|
|
burn-it-all-with-fire: lint devdeps
|
|
@echo "===> Flashing STOCK CircuitPython with no KMK or user keyboard scripts, and wiping entrypoint"
|
|
@echo "===> This is the nuclear option. Ctrl-C to cancel, or any key to continue"
|
|
@read
|
|
@echo "===> Pulling dependencies, this may take several minutes"
|
|
@git submodule update --init --recursive
|
|
@echo "===> Building circuitpython/mpy-cross"
|
|
@make -C build/circuitpython/mpy-cross
|
|
@echo "===> Pulling Nordic BLE stack"
|
|
@cd build/circuitpython/ports/nrf && ./drivers/bluetooth/download_ble_stack.sh 2>/dev/null >/dev/null
|
|
@echo "===> Preparing KMK source for bundling into CircuitPython"
|
|
@rm -rf build/circuitpython/ports/nrf/*
|
|
@echo "===> Building CircuitPython WITHOUT KMK or user keyboard script to induce ImportError"
|
|
@$(MAKE) circuitpy-flash-nrf
|
|
@echo "===> Wiping keyboard config"
|
|
@sleep 2
|
|
@-timeout -k 5s 10s $(PIPENV) run ampy -p ${AMPY_PORT} -d ${AMPY_DELAY} -b ${AMPY_BAUD} rm main.py 2>/dev/null
|
|
@echo "===> Wiped! Probably safe to flash keyboard, try Python serial REPL to verify?"
|