formatting sorry

updated docs
added reviung34, made gtips folder and moved all reviung boards into said folder
2023-01-23 16:44:21 -08:00 · 2023-01-23 16:37:02 -08:00 · 2023-01-23 16:24:39 -08:00
82 changed files with 1019 additions and 1053 deletions
--- a/91
+++ b/91
@@ -30,19 +30,19 @@ TIMESTAMP := $(shell date +%s)

 all: copy-kmk copy-bootpy copy-keymap copy-board

-.PHONY: compile compile-check
-compile: compile-check
+compile: $(MPY_TARGET_DIR)/.mpy.compiled
+
+$(MPY_TARGET_DIR)/.mpy.compiled: $(PY_KMK_TREE)
 ifeq ($(MPY_CROSS),)
-compile-check:
 	@echo "===> Could not find mpy-cross in PATH, exiting"
 	@false
-else
-compile-check: $(PY_KMK_TREE:%.py=$(MPY_TARGET_DIR)/%.mpy)
-	@echo "===> Compiling all py files to mpy with flags $(MPY_FLAGS)"
-$(MPY_TARGET_DIR)/%.mpy: %.py
-	@mkdir -p $(dir $@)
-	@$(MPY_CROSS) $(MPY_FLAGS) $? -o $@
 endif
+	@echo "===> Compiling all py files to mpy with flags $(MPY_FLAGS)"
+	@mkdir -p $(MPY_TARGET_DIR)
+	@echo "KMK_RELEASE = '$(DIST_DESCRIBE)'" > $(MPY_SOURCES)/release_info.py
+	@find $(MPY_SOURCES) -name "*.py" -exec sh -c 'mkdir -p $(MPY_TARGET_DIR)/$$(dirname {}) && $(MPY_CROSS) $(MPY_FLAGS) {} -o $(MPY_TARGET_DIR)/$$(dirname {})/$$(basename -s .py {}).mpy' \;
+	@rm -rf $(MPY_SOURCES)/release_info.py
+	@touch $(MPY_TARGET_DIR)/.mpy.compiled

 .devdeps: Pipfile.lock
 	@echo "===> Installing dependencies with pipenv"
@@ -92,7 +92,7 @@ test: lint unit-tests

 .PHONY: unit-tests
 unit-tests: devdeps
-	@$(PIPENV) run python3 -m unittest $(TESTS)
+	@$(PIPENV) run python3 -m unittest

 reset-bootloader:
 	@echo "===> Rebooting your board to bootloader (safe to ignore file not found errors)"
@@ -102,44 +102,55 @@ reset-board:
 	@echo "===> Rebooting your board (safe to ignore file not found errors)"
 	@-timeout -k 5s 10s $(PIPENV) run ampy -p /dev/ttyACM0 -d ${AMPY_DELAY} -b ${AMPY_BAUD} run util/reset.py

+ifdef MOUNTPOINT
+$(MOUNTPOINT)/kmk/.copied: $(shell find kmk/ -name "*.py" | xargs -0)
+	@echo "===> Copying KMK source folder"
+	@rsync -rh kmk $(MOUNTPOINT)/
+	@touch $(MOUNTPOINT)/kmk/.copied
+	@sync
+
+copy-kmk: $(MOUNTPOINT)/kmk/.copied
+else
+copy-kmk:
+	echo "**** MOUNTPOINT must be defined (wherever your CIRCUITPY drive is mounted) ****" && exit 1
+endif
+
+copy-board: $(MOUNTPOINT)/kb.py
+$(MOUNTPOINT)/kb.py: $(BOARD)
+	@echo "===> Copying your board to kb.py"
+	@rsync -rh $(BOARD) $@
+	@sync

 ifdef MOUNTPOINT
-ifdef BOARD
-copy-board:
-	@echo "===> Copying your board from $(BOARD) to $(MOUNTPOINT)"
-	@rsync -rhu $(BOARD)/*.py $(MOUNTPOINT)/
-	@sync
-else # BOARD
-copy-board:
-	@echo "**** Missing BOARD argument ****" && exit 1
-endif # BOARD
-
-copy-bootpy:
+$(MOUNTPOINT)/kmk/boot.py: boot.py
 	@echo "===> Copying required boot.py"
-	@rsync -rhu boot.py $(MOUNTPOINT)/boot.py
+	@rsync -rh boot.py $(MOUNTPOINT)/
 	@sync

-copy-compiled:
-	@echo "===> Copying compiled KMK folder"
-	@rsync -rhu $(MPY_TARGET_DIR)/* $(MOUNTPOINT)/
-	@sync
+copy-bootpy: $(MOUNTPOINT)/kmk/boot.py
+else
+copy-bootpy:
+	echo "**** MOUNTPOINT must be defined (wherever your CIRCUITPY drive is mounted) ****" && exit 1
+endif

-ifdef USER_KEYMAP
-copy-keymap:
+ifdef MOUNTPOINT
+ifndef USER_KEYMAP
+$(MOUNTPOINT)/main.py:
+	@echo "**** USER_KEYMAP must be defined (ex. USER_KEYMAP=user_keymaps/noop.py) ****" && exit 1
+else
+$(MOUNTPOINT)/main.py: $(USER_KEYMAP)
 	@echo "===> Copying your keymap to main.py"
-	@rsync -rhu $(USER_KEYMAP) $(MOUNTPOINT)/main.py
+	@rsync -rh $(USER_KEYMAP) $@
 	@sync
-else # USER_KEYMAP
-copy-keymap:
-	@echo "**** Missing USER_KEYMAP argument ****" && exit 1
 endif # USER_KEYMAP

-copy-kmk:
-	@echo "===> Copying KMK source folder"
-	@rsync -rhu kmk $(MOUNTPOINT)/
-	@sync
+copy-keymap: $(MOUNTPOINT)/main.py
+else
+copy-keymap:
+	echo "**** MOUNTPOINT must be defined (wherever your CIRCUITPY drive is mounted) ****" && exit 1

-else # MOUNTPOINT
-copy-board copy-bootpy copy-compiled copy-keymap copy-kmk:
-	@echo "**** MOUNTPOINT must be defined (wherever your CIRCUITPY drive is mounted) ****" && exit 1
-endif # ifndef MOUNTPOINT
+ifdef BOARD
+copy-board: $(MOUNTPOINT)/kb.py
+endif # BOARD
+
+endif # MOUNTPOINT
--- a/2
+++ b/2
@@ -17,6 +17,6 @@ ipython = "*"
 isort = "*"
 neovim = "*"
 s3cmd = "*"
-black = "==22.3.0"
+black = "==21.6b0"
 flake8-quotes = "*"
 flake8-black = "*"
--- a/Pipfile.lock
+++ b/Pipfile.lock
@@ -1,7 +1,7 @@
 {
    "_meta": {
        "hash": {
-            "sha256": "8c1b0ad909dc0ac0fc8013756ca7db8b5420f51c25cc1c2d1612f62fe5e19843"
+            "sha256": "0a04ec24d4aef6828e4f5eefa0a7d2c312f21f2b2f18c42c7004cdbe0c02bd53"
        },
        "pipfile-spec": 6,
        "requires": {},
@@ -23,12 +23,12 @@
            "index": "pypi",
            "version": "==1.1.0"
        },
-        "asttokens": {
+        "appdirs": {
            "hashes": [
-                "sha256:4622110b2a6f30b77e1473affaa97e711bc2f07d3f10848420ff1898edbe94f3",
-                "sha256:6b0ac9e93fb0335014d382b8fa9b3afa7df546984258005da0b9e7095b3deb1c"
+                "sha256:7d5d0167b2b1ba821647616af46a749d1c653740dd0d2415100fe26e27afdf41",
+                "sha256:a841dacd6b99318a741b166adb07e19ee71a274450e68237b4650ca1055ab128"
            ],
-            "version": "==2.2.1"
+            "version": "==1.4.4"
        },
        "backcall": {
            "hashes": [
@@ -39,32 +39,11 @@
        },
        "black": {
            "hashes": [
-                "sha256:06f9d8846f2340dfac80ceb20200ea5d1b3f181dd0556b47af4e8e0b24fa0a6b",
-                "sha256:10dbe6e6d2988049b4655b2b739f98785a884d4d6b85bc35133a8fb9a2233176",
-                "sha256:2497f9c2386572e28921fa8bec7be3e51de6801f7459dffd6e62492531c47e09",
-                "sha256:30d78ba6bf080eeaf0b7b875d924b15cd46fec5fd044ddfbad38c8ea9171043a",
-                "sha256:328efc0cc70ccb23429d6be184a15ce613f676bdfc85e5fe8ea2a9354b4e9015",
-                "sha256:35020b8886c022ced9282b51b5a875b6d1ab0c387b31a065b84db7c33085ca79",
-                "sha256:5795a0375eb87bfe902e80e0c8cfaedf8af4d49694d69161e5bd3206c18618bb",
-                "sha256:5891ef8abc06576985de8fa88e95ab70641de6c1fca97e2a15820a9b69e51b20",
-                "sha256:637a4014c63fbf42a692d22b55d8ad6968a946b4a6ebc385c5505d9625b6a464",
-                "sha256:67c8301ec94e3bcc8906740fe071391bce40a862b7be0b86fb5382beefecd968",
-                "sha256:6d2fc92002d44746d3e7db7cf9313cf4452f43e9ea77a2c939defce3b10b5c82",
-                "sha256:6ee227b696ca60dd1c507be80a6bc849a5a6ab57ac7352aad1ffec9e8b805f21",
-                "sha256:863714200ada56cbc366dc9ae5291ceb936573155f8bf8e9de92aef51f3ad0f0",
-                "sha256:9b542ced1ec0ceeff5b37d69838106a6348e60db7b8fdd245294dc1d26136265",
-                "sha256:a6342964b43a99dbc72f72812bf88cad8f0217ae9acb47c0d4f141a6416d2d7b",
-                "sha256:ad4efa5fad66b903b4a5f96d91461d90b9507a812b3c5de657d544215bb7877a",
-                "sha256:bc58025940a896d7e5356952228b68f793cf5fcb342be703c3a2669a1488cb72",
-                "sha256:cc1e1de68c8e5444e8f94c3670bb48a2beef0e91dddfd4fcc29595ebd90bb9ce",
-                "sha256:cee3e11161dde1b2a33a904b850b0899e0424cc331b7295f2a9698e79f9a69a0",
-                "sha256:e3556168e2e5c49629f7b0f377070240bd5511e45e25a4497bb0073d9dda776a",
-                "sha256:e8477ec6bbfe0312c128e74644ac8a02ca06bcdb8982d4ee06f209be28cdf163",
-                "sha256:ee8f1f7228cce7dffc2b464f07ce769f478968bfb3dd1254a4c2eeed84928aad",
-                "sha256:fd57160949179ec517d32ac2ac898b5f20d68ed1a9c977346efbac9c2f1e779d"
+                "sha256:dc132348a88d103016726fe360cb9ede02cecf99b76e3660ce6c596be132ce04",
+                "sha256:dfb8c5a069012b2ab1e972e7b908f5fb42b6bbabcba0a788b86dc05067c7d9c7"
            ],
            "index": "pypi",
-            "version": "==22.3.0"
+            "version": "==21.6b0"
        },
        "click": {
            "hashes": [
@@ -79,152 +58,144 @@
                "sha256:637996211036b6385ef91435e4fae22989472f9d571faba8927ba8253acbc330",
                "sha256:b8c3f85900b9dc423225913c5aace94729fe1fa9763b38939a95226f02d37186"
            ],
-            "markers": "python_version < '3.11' and python_version >= '3.7'",
+            "markers": "python_version >= '3.5'",
            "version": "==5.1.1"
        },
-        "executing": {
-            "hashes": [
-                "sha256:0314a69e37426e3608aada02473b4161d4caf5a4b244d1d0c48072b8fee7bacc",
-                "sha256:19da64c18d2d851112f09c287f8d3dbbdf725ab0e569077efb6cdcbd3497c107"
-            ],
-            "version": "==1.2.0"
-        },
        "flake8": {
            "hashes": [
-                "sha256:3833794e27ff64ea4e9cf5d410082a8b97ff1a06c16aa3d2027339cd0f1195c7",
-                "sha256:c61007e76655af75e6785a931f452915b371dc48f56efd765247c8fe68f2b181"
+                "sha256:07528381786f2a6237b061f6e96610a4167b226cb926e2aa2b6b1d78057c576b",
+                "sha256:bf8fd333346d844f616e8d47905ef3a3384edae6b4e9beb0c5101e25e3110907"
            ],
            "index": "pypi",
-            "version": "==6.0.0"
+            "version": "==3.9.2"
        },
        "flake8-black": {
            "hashes": [
-                "sha256:0dfbca3274777792a5bcb2af887a4cad72c72d0e86c94e08e3a3de151bb41c34",
-                "sha256:fe8ea2eca98d8a504f22040d9117347f6b367458366952862ac3586e7d4eeaca"
+                "sha256:941514149cb8b489cb17a4bb1cf18d84375db3b34381bb018de83509437931a0",
+                "sha256:f26651bc10db786c03f4093414f7c9ea982ed8a244cec323c984feeffdf4c118"
            ],
            "index": "pypi",
-            "version": "==0.3.6"
+            "version": "==0.2.1"
        },
        "flake8-commas": {
            "hashes": [
-                "sha256:940441ab8ee544df564ae3b3f49f20462d75d5c7cac2463e0b27436e2050f263",
-                "sha256:ebb96c31e01d0ef1d0685a21f3f0e2f8153a0381430e748bf0bbbb5d5b453d54"
+                "sha256:d3005899466f51380387df7151fb59afec666a0f4f4a2c6a8995b975de0f44b7",
+                "sha256:ee2141a3495ef9789a3894ed8802d03eff1eaaf98ce6d8653a7c573ef101935e"
            ],
            "index": "pypi",
-            "version": "==2.1.0"
+            "version": "==2.0.0"
        },
        "flake8-comprehensions": {
            "hashes": [
-                "sha256:412052ac4a947f36b891143430fef4859705af11b2572fbb689f90d372cf26ab",
-                "sha256:d763de3c74bc18a79c039a7ec732e0a1985b0c79309ceb51e56401ad0a2cd44e"
+                "sha256:b07aef3277623db32310aa241a1cec67212b53c1d18e767d7e26d4d83aa05bf7",
+                "sha256:f24be9032587127f7a5bc6d066bf755b6e66834f694383adb8a673e229c1f559"
            ],
            "index": "pypi",
-            "version": "==3.10.1"
+            "version": "==3.5.0"
        },
        "flake8-isort": {
            "hashes": [
-                "sha256:537f453a660d7e903f602ecfa36136b140de279df58d02eb1b6a0c84e83c528c",
-                "sha256:aa0cac02a62c7739e370ce6b9c31743edac904bae4b157274511fc8a19c75bbc"
+                "sha256:2b91300f4f1926b396c2c90185844eb1a3d5ec39ea6138832d119da0a208f4d9",
+                "sha256:729cd6ef9ba3659512dee337687c05d79c78e1215fdf921ed67e5fe46cce2f3c"
            ],
            "index": "pypi",
-            "version": "==6.0.0"
+            "version": "==4.0.0"
        },
        "flake8-quotes": {
            "hashes": [
-                "sha256:6e26892b632dacba517bf27219c459a8396dcfac0f5e8204904c5a4ba9b480e1"
+                "sha256:3f1116e985ef437c130431ac92f9b3155f8f652fda7405ac22ffdfd7a9d1055e"
            ],
            "index": "pypi",
-            "version": "==3.3.2"
+            "version": "==3.2.0"
        },
        "greenlet": {
            "hashes": [
-                "sha256:03a8f4f3430c3b3ff8d10a2a86028c660355ab637cee9333d63d66b56f09d52a",
-                "sha256:0bf60faf0bc2468089bdc5edd10555bab6e85152191df713e2ab1fcc86382b5a",
-                "sha256:18a7f18b82b52ee85322d7a7874e676f34ab319b9f8cce5de06067384aa8ff43",
-                "sha256:18e98fb3de7dba1c0a852731c3070cf022d14f0d68b4c87a19cc1016f3bb8b33",
-                "sha256:1a819eef4b0e0b96bb0d98d797bef17dc1b4a10e8d7446be32d1da33e095dbb8",
-                "sha256:26fbfce90728d82bc9e6c38ea4d038cba20b7faf8a0ca53a9c07b67318d46088",
-                "sha256:2780572ec463d44c1d3ae850239508dbeb9fed38e294c68d19a24d925d9223ca",
-                "sha256:283737e0da3f08bd637b5ad058507e578dd462db259f7f6e4c5c365ba4ee9343",
-                "sha256:2d4686f195e32d36b4d7cf2d166857dbd0ee9f3d20ae349b6bf8afc8485b3645",
-                "sha256:2dd11f291565a81d71dab10b7033395b7a3a5456e637cf997a6f33ebdf06f8db",
-                "sha256:30bcf80dda7f15ac77ba5af2b961bdd9dbc77fd4ac6105cee85b0d0a5fcf74df",
-                "sha256:32e5b64b148966d9cccc2c8d35a671409e45f195864560829f395a54226408d3",
-                "sha256:36abbf031e1c0f79dd5d596bfaf8e921c41df2bdf54ee1eed921ce1f52999a86",
-                "sha256:3a06ad5312349fec0ab944664b01d26f8d1f05009566339ac6f63f56589bc1a2",
-                "sha256:3a51c9751078733d88e013587b108f1b7a1fb106d402fb390740f002b6f6551a",
-                "sha256:3c9b12575734155d0c09d6c3e10dbd81665d5c18e1a7c6597df72fd05990c8cf",
-                "sha256:3f6ea9bd35eb450837a3d80e77b517ea5bc56b4647f5502cd28de13675ee12f7",
-                "sha256:4b58adb399c4d61d912c4c331984d60eb66565175cdf4a34792cd9600f21b394",
-                "sha256:4d2e11331fc0c02b6e84b0d28ece3a36e0548ee1a1ce9ddde03752d9b79bba40",
-                "sha256:5454276c07d27a740c5892f4907c86327b632127dd9abec42ee62e12427ff7e3",
-                "sha256:561091a7be172ab497a3527602d467e2b3fbe75f9e783d8b8ce403fa414f71a6",
-                "sha256:6c3acb79b0bfd4fe733dff8bc62695283b57949ebcca05ae5c129eb606ff2d74",
-                "sha256:703f18f3fda276b9a916f0934d2fb6d989bf0b4fb5a64825260eb9bfd52d78f0",
-                "sha256:7492e2b7bd7c9b9916388d9df23fa49d9b88ac0640db0a5b4ecc2b653bf451e3",
-                "sha256:76ae285c8104046b3a7f06b42f29c7b73f77683df18c49ab5af7983994c2dd91",
-                "sha256:7cafd1208fdbe93b67c7086876f061f660cfddc44f404279c1585bbf3cdc64c5",
-                "sha256:7efde645ca1cc441d6dc4b48c0f7101e8d86b54c8530141b09fd31cef5149ec9",
-                "sha256:88d9ab96491d38a5ab7c56dd7a3cc37d83336ecc564e4e8816dbed12e5aaefc8",
-                "sha256:8eab883b3b2a38cc1e050819ef06a7e6344d4a990d24d45bc6f2cf959045a45b",
-                "sha256:910841381caba4f744a44bf81bfd573c94e10b3045ee00de0cbf436fe50673a6",
-                "sha256:9190f09060ea4debddd24665d6804b995a9c122ef5917ab26e1566dcc712ceeb",
-                "sha256:937e9020b514ceedb9c830c55d5c9872abc90f4b5862f89c0887033ae33c6f73",
-                "sha256:94c817e84245513926588caf1152e3b559ff794d505555211ca041f032abbb6b",
-                "sha256:971ce5e14dc5e73715755d0ca2975ac88cfdaefcaab078a284fea6cfabf866df",
-                "sha256:9d14b83fab60d5e8abe587d51c75b252bcc21683f24699ada8fb275d7712f5a9",
-                "sha256:9f35ec95538f50292f6d8f2c9c9f8a3c6540bbfec21c9e5b4b751e0a7c20864f",
-                "sha256:a1846f1b999e78e13837c93c778dcfc3365902cfb8d1bdb7dd73ead37059f0d0",
-                "sha256:acd2162a36d3de67ee896c43effcd5ee3de247eb00354db411feb025aa319857",
-                "sha256:b0ef99cdbe2b682b9ccbb964743a6aca37905fda5e0452e5ee239b1654d37f2a",
-                "sha256:b80f600eddddce72320dbbc8e3784d16bd3fb7b517e82476d8da921f27d4b249",
-                "sha256:b864ba53912b6c3ab6bcb2beb19f19edd01a6bfcbdfe1f37ddd1778abfe75a30",
-                "sha256:b9ec052b06a0524f0e35bd8790686a1da006bd911dd1ef7d50b77bfbad74e292",
-                "sha256:ba2956617f1c42598a308a84c6cf021a90ff3862eddafd20c3333d50f0edb45b",
-                "sha256:bdfea8c661e80d3c1c99ad7c3ff74e6e87184895bbaca6ee8cc61209f8b9b85d",
-                "sha256:be4ed120b52ae4d974aa40215fcdfde9194d63541c7ded40ee12eb4dda57b76b",
-                "sha256:c4302695ad8027363e96311df24ee28978162cdcdd2006476c43970b384a244c",
-                "sha256:c48f54ef8e05f04d6eff74b8233f6063cb1ed960243eacc474ee73a2ea8573ca",
-                "sha256:c9c59a2120b55788e800d82dfa99b9e156ff8f2227f07c5e3012a45a399620b7",
-                "sha256:cd021c754b162c0fb55ad5d6b9d960db667faad0fa2ff25bb6e1301b0b6e6a75",
-                "sha256:d27ec7509b9c18b6d73f2f5ede2622441de812e7b1a80bbd446cb0633bd3d5ae",
-                "sha256:d5508f0b173e6aa47273bdc0a0b5ba055b59662ba7c7ee5119528f466585526b",
-                "sha256:d75209eed723105f9596807495d58d10b3470fa6732dd6756595e89925ce2470",
-                "sha256:db1a39669102a1d8d12b57de2bb7e2ec9066a6f2b3da35ae511ff93b01b5d564",
-                "sha256:dbfcfc0218093a19c252ca8eb9aee3d29cfdcb586df21049b9d777fd32c14fd9",
-                "sha256:e0f72c9ddb8cd28532185f54cc1453f2c16fb417a08b53a855c4e6a418edd099",
-                "sha256:e7c8dc13af7db097bed64a051d2dd49e9f0af495c26995c00a9ee842690d34c0",
-                "sha256:ea9872c80c132f4663822dd2a08d404073a5a9b5ba6155bea72fb2a79d1093b5",
-                "sha256:eff4eb9b7eb3e4d0cae3d28c283dc16d9bed6b193c2e1ace3ed86ce48ea8df19",
-                "sha256:f82d4d717d8ef19188687aa32b8363e96062911e63ba22a0cff7802a8e58e5f1",
-                "sha256:fc3a569657468b6f3fb60587e48356fe512c1754ca05a564f11366ac9e306526"
+                "sha256:0109af1138afbfb8ae647e31a2b1ab030f58b21dd8528c27beaeb0093b7938a9",
+                "sha256:0459d94f73265744fee4c2d5ec44c6f34aa8a31017e6e9de770f7bcf29710be9",
+                "sha256:04957dc96669be041e0c260964cfef4c77287f07c40452e61abe19d647505581",
+                "sha256:0722c9be0797f544a3ed212569ca3fe3d9d1a1b13942d10dd6f0e8601e484d26",
+                "sha256:097e3dae69321e9100202fc62977f687454cd0ea147d0fd5a766e57450c569fd",
+                "sha256:0b493db84d124805865adc587532ebad30efa68f79ad68f11b336e0a51ec86c2",
+                "sha256:13ba6e8e326e2116c954074c994da14954982ba2795aebb881c07ac5d093a58a",
+                "sha256:13ebf93c343dd8bd010cd98e617cb4c1c1f352a0cf2524c82d3814154116aa82",
+                "sha256:1407fe45246632d0ffb7a3f4a520ba4e6051fc2cbd61ba1f806900c27f47706a",
+                "sha256:1bf633a50cc93ed17e494015897361010fc08700d92676c87931d3ea464123ce",
+                "sha256:2d0bac0385d2b43a7bd1d651621a4e0f1380abc63d6fb1012213a401cbd5bf8f",
+                "sha256:3001d00eba6bbf084ae60ec7f4bb8ed375748f53aeaefaf2a37d9f0370558524",
+                "sha256:356e4519d4dfa766d50ecc498544b44c0249b6de66426041d7f8b751de4d6b48",
+                "sha256:38255a3f1e8942573b067510f9611fc9e38196077b0c8eb7a8c795e105f9ce77",
+                "sha256:3d75b8d013086b08e801fbbb896f7d5c9e6ccd44f13a9241d2bf7c0df9eda928",
+                "sha256:41b825d65f31e394b523c84db84f9383a2f7eefc13d987f308f4663794d2687e",
+                "sha256:42e602564460da0e8ee67cb6d7236363ee5e131aa15943b6670e44e5c2ed0f67",
+                "sha256:4aeaebcd91d9fee9aa768c1b39cb12214b30bf36d2b7370505a9f2165fedd8d9",
+                "sha256:4c8b1c43e75c42a6cafcc71defa9e01ead39ae80bd733a2608b297412beede68",
+                "sha256:4d37990425b4687ade27810e3b1a1c37825d242ebc275066cfee8cb6b8829ccd",
+                "sha256:4f09b0010e55bec3239278f642a8a506b91034f03a4fb28289a7d448a67f1515",
+                "sha256:505138d4fa69462447a562a7c2ef723c6025ba12ac04478bc1ce2fcc279a2db5",
+                "sha256:5067920de254f1a2dee8d3d9d7e4e03718e8fd2d2d9db962c8c9fa781ae82a39",
+                "sha256:56961cfca7da2fdd178f95ca407fa330c64f33289e1804b592a77d5593d9bd94",
+                "sha256:5a8e05057fab2a365c81abc696cb753da7549d20266e8511eb6c9d9f72fe3e92",
+                "sha256:659f167f419a4609bc0516fb18ea69ed39dbb25594934bd2dd4d0401660e8a1e",
+                "sha256:662e8f7cad915ba75d8017b3e601afc01ef20deeeabf281bd00369de196d7726",
+                "sha256:6f61d71bbc9b4a3de768371b210d906726535d6ca43506737682caa754b956cd",
+                "sha256:72b00a8e7c25dcea5946692a2485b1a0c0661ed93ecfedfa9b6687bd89a24ef5",
+                "sha256:811e1d37d60b47cb8126e0a929b58c046251f28117cb16fcd371eed61f66b764",
+                "sha256:81b0ea3715bf6a848d6f7149d25bf018fd24554a4be01fcbbe3fdc78e890b955",
+                "sha256:88c8d517e78acdf7df8a2134a3c4b964415b575d2840a2746ddb1cc6175f8608",
+                "sha256:8dca09dedf1bd8684767bc736cc20c97c29bc0c04c413e3276e0962cd7aeb148",
+                "sha256:974a39bdb8c90a85982cdb78a103a32e0b1be986d411303064b28a80611f6e51",
+                "sha256:9e112e03d37987d7b90c1e98ba5e1b59e1645226d78d73282f45b326f7bddcb9",
+                "sha256:9e9744c657d896c7b580455e739899e492a4a452e2dd4d2b3e459f6b244a638d",
+                "sha256:9ed358312e63bf683b9ef22c8e442ef6c5c02973f0c2a939ec1d7b50c974015c",
+                "sha256:9f2c221eecb7ead00b8e3ddb913c67f75cba078fd1d326053225a3f59d850d72",
+                "sha256:a20d33124935d27b80e6fdacbd34205732660e0a1d35d8b10b3328179a2b51a1",
+                "sha256:a4c0757db9bd08470ff8277791795e70d0bf035a011a528ee9a5ce9454b6cba2",
+                "sha256:afe07421c969e259e9403c3bb658968702bc3b78ec0b6fde3ae1e73440529c23",
+                "sha256:b1992ba9d4780d9af9726bbcef6a1db12d9ab1ccc35e5773685a24b7fb2758eb",
+                "sha256:b23d2a46d53210b498e5b701a1913697671988f4bf8e10f935433f6e7c332fb6",
+                "sha256:b5e83e4de81dcc9425598d9469a624826a0b1211380ac444c7c791d4a2137c19",
+                "sha256:be35822f35f99dcc48152c9839d0171a06186f2d71ef76dc57fa556cc9bf6b45",
+                "sha256:be9e0fb2ada7e5124f5282d6381903183ecc73ea019568d6d63d33f25b2a9000",
+                "sha256:c140e7eb5ce47249668056edf3b7e9900c6a2e22fb0eaf0513f18a1b2c14e1da",
+                "sha256:c6a08799e9e88052221adca55741bf106ec7ea0710bca635c208b751f0d5b617",
+                "sha256:cb242fc2cda5a307a7698c93173d3627a2a90d00507bccf5bc228851e8304963",
+                "sha256:cce1e90dd302f45716a7715517c6aa0468af0bf38e814ad4eab58e88fc09f7f7",
+                "sha256:cd4ccc364cf75d1422e66e247e52a93da6a9b73cefa8cad696f3cbbb75af179d",
+                "sha256:d21681f09e297a5adaa73060737e3aa1279a13ecdcfcc6ef66c292cb25125b2d",
+                "sha256:d38ffd0e81ba8ef347d2be0772e899c289b59ff150ebbbbe05dc61b1246eb4e0",
+                "sha256:d566b82e92ff2e09dd6342df7e0eb4ff6275a3f08db284888dcd98134dbd4243",
+                "sha256:d5b0ff9878333823226d270417f24f4d06f235cb3e54d1103b71ea537a6a86ce",
+                "sha256:d6ee1aa7ab36475035eb48c01efae87d37936a8173fc4d7b10bb02c2d75dd8f6",
+                "sha256:db38f80540083ea33bdab614a9d28bcec4b54daa5aff1668d7827a9fc769ae0a",
+                "sha256:ea688d11707d30e212e0110a1aac7f7f3f542a259235d396f88be68b649e47d1",
+                "sha256:f6327b6907b4cb72f650a5b7b1be23a2aab395017aa6f1adb13069d66360eb3f",
+                "sha256:fb412b7db83fe56847df9c47b6fe3f13911b06339c2aa02dcc09dce8bbf582cd"
            ],
            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
-            "version": "==2.0.2"
+            "version": "==2.0.1"
        },
        "ipdb": {
            "hashes": [
-                "sha256:c23b6736f01fd4586cc2ecbebdf79a5eb454796853e1cd8f2ed3b7b91d4a3e93",
-                "sha256:f74c2f741c18b909eaf89f19fde973f745ac721744aa1465888ce45813b63a9c"
+                "sha256:951bd9a64731c444fd907a5ce268543020086a697f6be08f7cc2c9a752a278c5"
            ],
            "index": "pypi",
-            "version": "==0.13.11"
+            "version": "==0.13.9"
        },
        "ipython": {
            "hashes": [
-                "sha256:b13a1d6c1f5818bd388db53b7107d17454129a70de2b87481d555daede5eb49e",
-                "sha256:b38c31e8fc7eff642fc7c597061fff462537cf2314e3225a19c906b7b0d8a345"
+                "sha256:55df3e0bd0f94e715abd968bedd89d4e8a7bce4bf498fb123fed4f5398fea874",
+                "sha256:b5548ec5329a4bcf054a5deed5099b0f9622eb9ea51aaa7104d215fece201d8c"
            ],
            "index": "pypi",
-            "version": "==8.10.0"
+            "version": "==7.31.1"
        },
        "isort": {
            "hashes": [
-                "sha256:8bef7dde241278824a6d83f44a544709b065191b95b6e50894bdc722fcba0504",
-                "sha256:f84c2818376e66cf843d497486ea8fed8700b340f308f076c6fb1229dff318b6"
+                "sha256:0a943902919f65c5684ac4e0154b1ad4fac6dcaa5d9f3426b732f1c8b5419be6",
+                "sha256:2bb1680aad211e3c9944dbce1d4ba09a989f04e238296c87fe2139faa26d655d"
            ],
            "index": "pypi",
-            "version": "==5.12.0"
+            "version": "==5.8.0"
        },
        "jedi": {
            "hashes": [
@@ -244,11 +215,10 @@
        },
        "mccabe": {
            "hashes": [
-                "sha256:348e0240c33b60bbdf4e523192ef919f28cb2c3d7d5c7794f74009290f236325",
-                "sha256:6c2d30ab6be0e4a46919781807b4f0d834ebdd6c6e3dca0bda5a15f863427b6e"
+                "sha256:ab8a6258860da4b6677da4bd2fe5dc2c659cff31b3ee4f7f5d64e79735b80d42",
+                "sha256:dd8d182285a0fe56bace7f45b5e7d1a6ebcbf524e8f3bd87eb0f125271b8831f"
            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==0.7.0"
+            "version": "==0.6.1"
        },
        "msgpack": {
            "hashes": [
@@ -309,11 +279,10 @@
        },
        "mypy-extensions": {
            "hashes": [
-                "sha256:4392f6c0eb8a5668a69e23d168ffa70f0be9ccfd32b5cc2d26a34ae5b844552d",
-                "sha256:75dbf8955dc00442a438fc4d0666508a9a97b6bd41aa2f0ffe9d2f2725af0782"
+                "sha256:090fedd75945a69ae91ce1303b5824f428daf5a028d2f6ab8a299250a846f15d",
+                "sha256:2d82818f5bb3e369420cb3c4060a7970edba416647068eb4c5343488a6c604a8"
            ],
-            "markers": "python_version >= '3.5'",
-            "version": "==1.0.0"
+            "version": "==0.4.3"
        },
        "neovim": {
            "hashes": [
@@ -332,11 +301,11 @@
        },
        "pathspec": {
            "hashes": [
-                "sha256:3a66eb970cbac598f9e5ccb5b2cf58930cd8e3ed86d393d541eaf2d8b1705229",
-                "sha256:64d338d4e0914e91c1792321e6907b5a593f1ab1851de7fc269557a21b30ebbc"
+                "sha256:3c95343af8b756205e2aba76e843ba9520a24dd84f68c22b9f93251507509dd6",
+                "sha256:56200de4077d9d0791465aa9095a01d421861e405b5096955051deefd697d6f6"
            ],
            "markers": "python_version >= '3.7'",
-            "version": "==0.11.0"
+            "version": "==0.10.3"
        },
        "pexpect": {
            "hashes": [
@@ -353,14 +322,6 @@
            ],
            "version": "==0.7.5"
        },
-        "platformdirs": {
-            "hashes": [
-                "sha256:8a1228abb1ef82d788f74139988b137e78692984ec7b08eaa6c65f1723af28f9",
-                "sha256:b1d5eb14f221506f50d6604a561f4c5786d9e80355219694a1b244bcd96f4567"
-            ],
-            "markers": "python_version >= '3.7'",
-            "version": "==3.0.0"
-        },
        "prompt-toolkit": {
            "hashes": [
                "sha256:3e163f254bef5a03b146397d7c1963bd3e2812f0964bb9a24e6ec761fd28db63",
@@ -376,36 +337,29 @@
            ],
            "version": "==0.7.0"
        },
-        "pure-eval": {
-            "hashes": [
-                "sha256:01eaab343580944bc56080ebe0a674b39ec44a945e6d09ba7db3cb8cec289350",
-                "sha256:2b45320af6dfaa1750f543d714b6d1c520a1688dec6fd24d339063ce0aaa9ac3"
-            ],
-            "version": "==0.2.2"
-        },
        "pycodestyle": {
            "hashes": [
-                "sha256:347187bdb476329d98f695c213d7295a846d1152ff4fe9bacb8a9590b8ee7053",
-                "sha256:8a4eaf0d0495c7395bdab3589ac2db602797d76207242c17d470186815706610"
+                "sha256:514f76d918fcc0b55c6680472f0a37970994e07bbb80725808c17089be302068",
+                "sha256:c389c1d06bf7904078ca03399a4816f974a1d590090fecea0c63ec26ebaf1cef"
            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==2.10.0"
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==2.7.0"
        },
        "pyflakes": {
            "hashes": [
-                "sha256:ec55bf7fe21fff7f1ad2f7da62363d749e2a470500eab1b555334b67aa1ef8cf",
-                "sha256:ec8b276a6b60bd80defed25add7e439881c19e64850afd9b346283d4165fd0fd"
+                "sha256:7893783d01b8a89811dd72d7dfd4d84ff098e5eed95cfa8905b22bbffe52efc3",
+                "sha256:f5bc8ecabc05bb9d291eb5203d6810b49040f6ff446a756326104746cc00c1db"
            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==3.0.1"
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==2.3.1"
        },
        "pygments": {
            "hashes": [
-                "sha256:b3ed06a9e8ac9a9aae5a6f5dbe78a8a58655d17b43b93c078f094ddc476ae297",
-                "sha256:fa7bd7bd2771287c0de303af8bfdfc731f51bd2c6a47ab69d117138893b82717"
+                "sha256:56a8508ae95f98e2b9bdf93a6be5ae3f7d8af858b43e02c5a2ff083726be40c1",
+                "sha256:f643f331ab57ba3c9d89212ee4a2dabc6e94f117cf4eefde99a0574720d14c42"
            ],
            "markers": "python_version >= '3.6'",
-            "version": "==2.14.0"
+            "version": "==2.13.0"
        },
        "pynvim": {
            "hashes": [
@@ -430,27 +384,129 @@
        },
        "python-dotenv": {
            "hashes": [
-                "sha256:1c93de8f636cde3ce377292818d0e440b6e45a82f215c3744979151fa8151c49",
-                "sha256:41e12e0318bebc859fcc4d97d4db8d20ad21721a6aa5047dd59f090391cb549a"
+                "sha256:1684eb44636dd462b66c3ee016599815514527ad99965de77f43e0944634a7e5",
+                "sha256:b77d08274639e3d34145dfa6c7008e66df0f04b7be7a75fd0d5292c191d79045"
            ],
            "markers": "python_version >= '3.7'",
-            "version": "==0.21.1"
+            "version": "==0.21.0"
        },
        "python-magic": {
            "hashes": [
-                "sha256:c1ba14b08e4a5f5c31a302b7721239695b2f0f058d125bd5ce1ee36b9d9d3c3b",
-                "sha256:c212960ad306f700aa0d01e5d7a325d20548ff97eb9920dcd29513174f0294d3"
+                "sha256:4fec8ee805fea30c07afccd1592c0f17977089895bdfaae5fec870a84e997626",
+                "sha256:de800df9fb50f8ec5974761054a708af6e4246b03b4bdaee993f948947b0ebcf"
            ],
            "index": "pypi",
-            "version": "==0.4.27"
+            "version": "==0.4.24"
+        },
+        "regex": {
+            "hashes": [
+                "sha256:052b670fafbe30966bbe5d025e90b2a491f85dfe5b2583a163b5e60a85a321ad",
+                "sha256:0653d012b3bf45f194e5e6a41df9258811ac8fc395579fa82958a8b76286bea4",
+                "sha256:0a069c8483466806ab94ea9068c34b200b8bfc66b6762f45a831c4baaa9e8cdd",
+                "sha256:0cf0da36a212978be2c2e2e2d04bdff46f850108fccc1851332bcae51c8907cc",
+                "sha256:131d4be09bea7ce2577f9623e415cab287a3c8e0624f778c1d955ec7c281bd4d",
+                "sha256:144486e029793a733e43b2e37df16a16df4ceb62102636ff3db6033994711066",
+                "sha256:1ddf14031a3882f684b8642cb74eea3af93a2be68893901b2b387c5fd92a03ec",
+                "sha256:1eba476b1b242620c266edf6325b443a2e22b633217a9835a52d8da2b5c051f9",
+                "sha256:20f61c9944f0be2dc2b75689ba409938c14876c19d02f7585af4460b6a21403e",
+                "sha256:22960019a842777a9fa5134c2364efaed5fbf9610ddc5c904bd3a400973b0eb8",
+                "sha256:22e7ebc231d28393dfdc19b185d97e14a0f178bedd78e85aad660e93b646604e",
+                "sha256:23cbb932cc53a86ebde0fb72e7e645f9a5eec1a5af7aa9ce333e46286caef783",
+                "sha256:29c04741b9ae13d1e94cf93fca257730b97ce6ea64cfe1eba11cf9ac4e85afb6",
+                "sha256:2bde29cc44fa81c0a0c8686992c3080b37c488df167a371500b2a43ce9f026d1",
+                "sha256:2cdc55ca07b4e70dda898d2ab7150ecf17c990076d3acd7a5f3b25cb23a69f1c",
+                "sha256:370f6e97d02bf2dd20d7468ce4f38e173a124e769762d00beadec3bc2f4b3bc4",
+                "sha256:395161bbdbd04a8333b9ff9763a05e9ceb4fe210e3c7690f5e68cedd3d65d8e1",
+                "sha256:44136355e2f5e06bf6b23d337a75386371ba742ffa771440b85bed367c1318d1",
+                "sha256:44a6c2f6374e0033873e9ed577a54a3602b4f609867794c1a3ebba65e4c93ee7",
+                "sha256:4919899577ba37f505aaebdf6e7dc812d55e8f097331312db7f1aab18767cce8",
+                "sha256:4b4b1fe58cd102d75ef0552cf17242705ce0759f9695334a56644ad2d83903fe",
+                "sha256:4bdd56ee719a8f751cf5a593476a441c4e56c9b64dc1f0f30902858c4ef8771d",
+                "sha256:4bf41b8b0a80708f7e0384519795e80dcb44d7199a35d52c15cc674d10b3081b",
+                "sha256:4cac3405d8dda8bc6ed499557625585544dd5cbf32072dcc72b5a176cb1271c8",
+                "sha256:4fe7fda2fe7c8890d454f2cbc91d6c01baf206fbc96d89a80241a02985118c0c",
+                "sha256:50921c140561d3db2ab9f5b11c5184846cde686bb5a9dc64cae442926e86f3af",
+                "sha256:5217c25229b6a85049416a5c1e6451e9060a1edcf988641e309dbe3ab26d3e49",
+                "sha256:5352bea8a8f84b89d45ccc503f390a6be77917932b1c98c4cdc3565137acc714",
+                "sha256:542e3e306d1669b25936b64917285cdffcd4f5c6f0247636fec037187bd93542",
+                "sha256:543883e3496c8b6d58bd036c99486c3c8387c2fc01f7a342b760c1ea3158a318",
+                "sha256:586b36ebda81e6c1a9c5a5d0bfdc236399ba6595e1397842fd4a45648c30f35e",
+                "sha256:597f899f4ed42a38df7b0e46714880fb4e19a25c2f66e5c908805466721760f5",
+                "sha256:5a260758454580f11dd8743fa98319bb046037dfab4f7828008909d0aa5292bc",
+                "sha256:5aefb84a301327ad115e9d346c8e2760009131d9d4b4c6b213648d02e2abe144",
+                "sha256:5e6a5567078b3eaed93558842346c9d678e116ab0135e22eb72db8325e90b453",
+                "sha256:5ff525698de226c0ca743bfa71fc6b378cda2ddcf0d22d7c37b1cc925c9650a5",
+                "sha256:61edbca89aa3f5ef7ecac8c23d975fe7261c12665f1d90a6b1af527bba86ce61",
+                "sha256:659175b2144d199560d99a8d13b2228b85e6019b6e09e556209dfb8c37b78a11",
+                "sha256:6a9a19bea8495bb419dc5d38c4519567781cd8d571c72efc6aa959473d10221a",
+                "sha256:6b30bddd61d2a3261f025ad0f9ee2586988c6a00c780a2fb0a92cea2aa702c54",
+                "sha256:6ffd55b5aedc6f25fd8d9f905c9376ca44fcf768673ffb9d160dd6f409bfda73",
+                "sha256:702d8fc6f25bbf412ee706bd73019da5e44a8400861dfff7ff31eb5b4a1276dc",
+                "sha256:74bcab50a13960f2a610cdcd066e25f1fd59e23b69637c92ad470784a51b1347",
+                "sha256:75f591b2055523fc02a4bbe598aa867df9e953255f0b7f7715d2a36a9c30065c",
+                "sha256:763b64853b0a8f4f9cfb41a76a4a85a9bcda7fdda5cb057016e7706fde928e66",
+                "sha256:76c598ca73ec73a2f568e2a72ba46c3b6c8690ad9a07092b18e48ceb936e9f0c",
+                "sha256:78d680ef3e4d405f36f0d6d1ea54e740366f061645930072d39bca16a10d8c93",
+                "sha256:7b280948d00bd3973c1998f92e22aa3ecb76682e3a4255f33e1020bd32adf443",
+                "sha256:7db345956ecce0c99b97b042b4ca7326feeec6b75facd8390af73b18e2650ffc",
+                "sha256:7dbdce0c534bbf52274b94768b3498abdf675a691fec5f751b6057b3030f34c1",
+                "sha256:7ef6b5942e6bfc5706301a18a62300c60db9af7f6368042227ccb7eeb22d0892",
+                "sha256:7f5a3ffc731494f1a57bd91c47dc483a1e10048131ffb52d901bfe2beb6102e8",
+                "sha256:8a45b6514861916c429e6059a55cf7db74670eaed2052a648e3e4d04f070e001",
+                "sha256:8ad241da7fac963d7573cc67a064c57c58766b62a9a20c452ca1f21050868dfa",
+                "sha256:8b0886885f7323beea6f552c28bff62cbe0983b9fbb94126531693ea6c5ebb90",
+                "sha256:8ca88da1bd78990b536c4a7765f719803eb4f8f9971cc22d6ca965c10a7f2c4c",
+                "sha256:8e0caeff18b96ea90fc0eb6e3bdb2b10ab5b01a95128dfeccb64a7238decf5f0",
+                "sha256:957403a978e10fb3ca42572a23e6f7badff39aa1ce2f4ade68ee452dc6807692",
+                "sha256:9af69f6746120998cd9c355e9c3c6aec7dff70d47247188feb4f829502be8ab4",
+                "sha256:9c94f7cc91ab16b36ba5ce476f1904c91d6c92441f01cd61a8e2729442d6fcf5",
+                "sha256:a37d51fa9a00d265cf73f3de3930fa9c41548177ba4f0faf76e61d512c774690",
+                "sha256:a3a98921da9a1bf8457aeee6a551948a83601689e5ecdd736894ea9bbec77e83",
+                "sha256:a3c1ebd4ed8e76e886507c9eddb1a891673686c813adf889b864a17fafcf6d66",
+                "sha256:a5f9505efd574d1e5b4a76ac9dd92a12acb2b309551e9aa874c13c11caefbe4f",
+                "sha256:a8ff454ef0bb061e37df03557afda9d785c905dab15584860f982e88be73015f",
+                "sha256:a9d0b68ac1743964755ae2d89772c7e6fb0118acd4d0b7464eaf3921c6b49dd4",
+                "sha256:aa62a07ac93b7cb6b7d0389d8ef57ffc321d78f60c037b19dfa78d6b17c928ee",
+                "sha256:ac741bf78b9bb432e2d314439275235f41656e189856b11fb4e774d9f7246d81",
+                "sha256:ae1e96785696b543394a4e3f15f3f225d44f3c55dafe3f206493031419fedf95",
+                "sha256:b683e5fd7f74fb66e89a1ed16076dbab3f8e9f34c18b1979ded614fe10cdc4d9",
+                "sha256:b7a8b43ee64ca8f4befa2bea4083f7c52c92864d8518244bfa6e88c751fa8fff",
+                "sha256:b8e38472739028e5f2c3a4aded0ab7eadc447f0d84f310c7a8bb697ec417229e",
+                "sha256:bfff48c7bd23c6e2aec6454aaf6edc44444b229e94743b34bdcdda2e35126cf5",
+                "sha256:c14b63c9d7bab795d17392c7c1f9aaabbffd4cf4387725a0ac69109fb3b550c6",
+                "sha256:c27cc1e4b197092e50ddbf0118c788d9977f3f8f35bfbbd3e76c1846a3443df7",
+                "sha256:c28d3309ebd6d6b2cf82969b5179bed5fefe6142c70f354ece94324fa11bf6a1",
+                "sha256:c670f4773f2f6f1957ff8a3962c7dd12e4be54d05839b216cb7fd70b5a1df394",
+                "sha256:ce6910b56b700bea7be82c54ddf2e0ed792a577dfaa4a76b9af07d550af435c6",
+                "sha256:d0213671691e341f6849bf33cd9fad21f7b1cb88b89e024f33370733fec58742",
+                "sha256:d03fe67b2325cb3f09be029fd5da8df9e6974f0cde2c2ac6a79d2634e791dd57",
+                "sha256:d0e5af9a9effb88535a472e19169e09ce750c3d442fb222254a276d77808620b",
+                "sha256:d243b36fbf3d73c25e48014961e83c19c9cc92530516ce3c43050ea6276a2ab7",
+                "sha256:d26166acf62f731f50bdd885b04b38828436d74e8e362bfcb8df221d868b5d9b",
+                "sha256:d403d781b0e06d2922435ce3b8d2376579f0c217ae491e273bab8d092727d244",
+                "sha256:d8716f82502997b3d0895d1c64c3b834181b1eaca28f3f6336a71777e437c2af",
+                "sha256:e4f781ffedd17b0b834c8731b75cce2639d5a8afe961c1e58ee7f1f20b3af185",
+                "sha256:e613a98ead2005c4ce037c7b061f2409a1a4e45099edb0ef3200ee26ed2a69a8",
+                "sha256:ef4163770525257876f10e8ece1cf25b71468316f61451ded1a6f44273eedeb5"
+            ],
+            "markers": "python_version >= '3.6'",
+            "version": "==2022.10.31"
        },
        "s3cmd": {
            "hashes": [
-                "sha256:15330776e7ff993d8ae0ac213bf896f210719e9b91445f5f7626a8fa7e74e30b",
-                "sha256:2204306742c33c24fbca02b78e059bacfc1bfc04af09c7e9866f267a11a9ddb2"
+                "sha256:49cd23d516b17974b22b611a95ce4d93fe326feaa07320bd1d234fed68cbccfa",
+                "sha256:966b0a494a916fc3b4324de38f089c86c70ee90e8e1cae6d59102103a4c0cc03"
            ],
            "index": "pypi",
-            "version": "==2.3.0"
+            "version": "==2.1.0"
+        },
+        "setuptools": {
+            "hashes": [
+                "sha256:d0b9a8433464d5800cbe05094acf5c6d52a91bfac9b52bcfc4d41382be5d5d31",
+                "sha256:e197a19aa8ec9722928f2206f8de752def0e4c9fc6953527360d1c36d94ddb2f"
+            ],
+            "index": "pypi",
+            "version": "==65.5.1"
        },
        "six": {
            "hashes": [
@@ -460,35 +516,35 @@
            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
            "version": "==1.16.0"
        },
-        "stack-data": {
+        "testfixtures": {
            "hashes": [
-                "sha256:32d2dd0376772d01b6cb9fc996f3c8b57a357089dec328ed4b6553d037eaf815",
-                "sha256:cbb2a53eb64e5785878201a97ed7c7b94883f48b87bfb0bbe8b623c74679e4a8"
+                "sha256:02dae883f567f5b70fd3ad3c9eefb95912e78ac90be6c7444b5e2f46bf572c84",
+                "sha256:7de200e24f50a4a5d6da7019fb1197aaf5abd475efb2ec2422fdcf2f2eb98c1d"
            ],
-            "version": "==0.6.2"
+            "version": "==6.18.5"
        },
-        "tomli": {
+        "toml": {
            "hashes": [
-                "sha256:939de3e7a6161af0c887ef91b7d41a53e7c5a1ca976325f429cb46ea9bc30ecc",
-                "sha256:de526c12914f0c550d15924c62d72abc48d6fe7364aa87328337a31007fe8a4f"
+                "sha256:806143ae5bfb6a3c6e736a764057db0e6a0e05e338b5630894a5f779cabb4f9b",
+                "sha256:b3bda1d108d5dd99f4a20d24d9c348e91c4db7ab1b749200bded2f839ccbe68f"
            ],
-            "markers": "python_version < '3.11'",
-            "version": "==2.0.1"
+            "markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==0.10.2"
        },
        "traitlets": {
            "hashes": [
-                "sha256:9e6ec080259b9a5940c797d58b613b5e31441c2257b87c2e795c5228ae80d2d8",
-                "sha256:f6cde21a9c68cf756af02035f72d5a723bf607e862e7be33ece505abf4a3bad9"
+                "sha256:6cc57d6dc28c85d5365961726ffd19b538739347749e13ebe34e03323a0e8f84",
+                "sha256:c864831efa0ba6576d09b44884b34e41defc18c0d7e720b4a2d6698c842cab3e"
            ],
            "markers": "python_version >= '3.7'",
-            "version": "==5.9.0"
+            "version": "==5.8.0"
        },
        "wcwidth": {
            "hashes": [
-                "sha256:795b138f6875577cd91bba52baf9e445cd5118fd32723b460e30a0af30ea230e",
-                "sha256:a5220780a404dbe3353789870978e472cfe477761f06ee55077256e509b156d0"
+                "sha256:beb4802a9cebb9144e99086eff703a642a13d6a0052920003a230f3294bbe784",
+                "sha256:c4d647b99872929fdb7bdcaa4fbe7f01413ed3d98077df798530e5b04f116c83"
            ],
-            "version": "==0.2.6"
+            "version": "==0.2.5"
        }
    }
 }
--- a/boards/anavi/knob1/code.py
+++ b/boards/anavi/knob1/code.py
@@ -15,7 +15,6 @@ knob.extensions.append(media_keys)

 # Rotary encoder that also acts as a key
 encoder_handler = EncoderHandler()
-encoder_handler.divisor = 2
 encoder_handler.pins = ((board.D1, board.D2, board.D0),)
 encoder_handler.map = (((KC.VOLD, KC.VOLU, KC.MUTE),),)
 knob.modules.append(encoder_handler)
--- a/boards/anavi/knobs3/code.py
+++ b/boards/anavi/knobs3/code.py
@@ -15,7 +15,6 @@ knob.extensions.append(media_keys)

 # Rotary encoders that also acts as keys
 encoder_handler = EncoderHandler()
-encoder_handler.divisor = 2
 encoder_handler.pins = (
    (board.D1, board.D2, board.D0),
    (board.D9, board.D10, board.D3),
--- a/boards/anavi/macro-pad-10/code.py
+++ b/boards/anavi/macro-pad-10/code.py
@@ -78,7 +78,6 @@ keyboard.keymap = [

 # Rotary encoder that also acts as a key
 encoder_handler = EncoderHandler()
-encoder_handler.divisor = 2
 encoder_handler.pins = ((board.D8, board.D7, board.D9),)
 encoder_handler.map = (((KC.VOLD, KC.VOLU, KC.MUTE),),)
 keyboard.modules.append(encoder_handler)
--- a/boards/anavi/macro-pad-12/README.md
+++ b/boards/anavi/macro-pad-12/README.md
@@ -1,12 +0,0 @@
-# ANAVI Macro Pad 12
-
-ANAVI Macro Pad 12 is an open source, programmable mechanical keyboard with 9 hot-swappable mechanical switches, RGB WS2812B underlighting and yellow backlit a rotary encoder and [Seeed XIAO RP2040](https://www.seeedstudio.com/XIAO-RP2040-v1-0-p-5026.html).
-
-ANAVI Macro Pad 12 has been designed with the cross platform and open source electronics design automation suite KiCad. All KiCad [files and schematics are available at GitHub](https://github.com/anavitechnology/anavi-macro-pad-12) under [Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)](https://creativecommons.org/licenses/by-sa/4.0/).
-
-Extensions enabled by default:
- [Encoder](/docs/en/encoder.md) Twist control for all the things
- [LED](/docs/en/led.md) Light your keys up (for backlit)
- [RGB](/docs/en/rgb.md) Light it up (for underlighting)
- [MediaKeys](/docs/en/media_keys.md) Control volume and other media functions
- [PEG_OLED](/docs/peg_oled_display.md) Show information on the mini OLED display
--- a/boards/anavi/macro-pad-12/code.py
+++ b/boards/anavi/macro-pad-12/code.py
@@ -1,97 +0,0 @@
-import board
-
-from kmk.extensions.LED import LED
-from kmk.extensions.media_keys import MediaKeys
-from kmk.extensions.peg_oled_Display import (
-    Oled,
-    OledData,
-    OledDisplayMode,
-    OledReactionType,
-)
-from kmk.extensions.RGB import RGB, AnimationModes
-from kmk.keys import KC
-from kmk.kmk_keyboard import KMKKeyboard
-from kmk.scanners import DiodeOrientation
-
-keyboard = KMKKeyboard()
-
-# I2C pins for the mini OLED display
-keyboard.SCL = board.D5
-keyboard.SDA = board.D4
-
-oled_ext = Oled(
-    OledData(
-        corner_one={0: OledReactionType.STATIC, 1: ['ANAVI Macro Pad 12']},
-        corner_two={0: OledReactionType.STATIC, 1: [' ']},
-        corner_three={0: OledReactionType.STATIC, 1: ['Open Source']},
-        corner_four={0: OledReactionType.STATIC, 1: [' ']},
-    ),
-    oWidth=128,
-    oHeight=64,
-    toDisplay=OledDisplayMode.TXT,
-    flip=False,
-)
-keyboard.extensions.append(oled_ext)
-
-led_ext = LED(
-    led_pin=[
-        board.D0,
-    ],
-    brightness=100,
-    brightness_step=5,
-    brightness_limit=100,
-    breathe_center=1.5,
-    animation_mode=AnimationModes.STATIC,
-    animation_speed=1,
-    user_animation=None,
-    val=100,
-)
-keyboard.extensions.append(led_ext)
-
-# WS2812B LED strips on the back
-underglow = RGB(
-    pixel_pin=board.D10,
-    num_pixels=6,
-    val_limit=100,
-    val_default=25,
-    animation_mode=AnimationModes.RAINBOW,
-)
-keyboard.extensions.append(underglow)
-
-# Neopixel on XIAO RP2040
-frontglow = RGB(
-    pixel_pin=board.NEOPIXEL,
-    num_pixels=1,
-    val_limit=100,
-    val_default=25,
-    animation_mode=AnimationModes.RAINBOW,
-)
-keyboard.extensions.append(frontglow)
-
-keyboard.col_pins = (board.D6, board.D8, board.D9)
-keyboard.row_pins = (board.D1, board.D2, board.D3, board.D7)
-keyboard.diode_orientation = DiodeOrientation.COL2ROW
-
-media_keys = MediaKeys()
-keyboard.extensions.append(media_keys)
-
-# Matrix 4x3 keymap, 12 keys in total
-keyboard.keymap = [
-    [
-        KC.N1,
-        KC.N2,
-        KC.N3,
-        KC.N4,
-        KC.N5,
-        KC.N6,
-        KC.N7,
-        KC.N8,
-        KC.N9,
-        KC.N0,
-        KC.A,
-        KC.B,
-    ]
-]
-
-if __name__ == '__main__':
-    keyboard.go()
--- a/boards/boardsource/Lulu/main.py
+++ b/boards/boardsource/Lulu/main.py
@@ -12,15 +12,15 @@ from kmk.extensions.peg_rgb_matrix import Rgb_matrix
 from kmk.handlers.sequences import send_string
 from kmk.hid import HIDModes
 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
 from kmk.modules.split import Split, SplitSide, SplitType

 keyboard = KMKKeyboard()
-holdtap = HoldTap()
+modtap = ModTap()
 layers_ext = Layers()
 keyboard.modules.append(layers_ext)
-keyboard.modules.append(holdtap)
+keyboard.modules.append(modtap)

 oled_ext = Oled(
    OledData(
--- a/boards/boardsource/microdox/README.md
+++ b/boards/boardsource/microdox/README.md
@@ -12,7 +12,7 @@ Retailers (USA)
 Extensions enabled by default  
 - [Layers](/docs/en/layers.md) Need more keys than switches? Use layers.
 - [BLE_Split](/docs/en/split_keyboards.md) Connects halves without wires
- [HoldTap](/docs/en/holdtap.md) Allows mod keys to act as different keys when tapped.
+- [ModTap](/docs/en/modtap.md) Allows mod keys to act as different keys when tapped.

 Common Extensions
 - [Split](/docs/en/split_keyboards.md) Connects halves using a wire
--- a/boards/crowboard/main.py
+++ b/boards/crowboard/main.py
@@ -3,16 +3,16 @@ import board
 from kb import KMKKeyboard

 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
 from kmk.scanners import DiodeOrientation

 keyboard = KMKKeyboard()

 keyboard.modules.append(Layers())

-holdtap = HoldTap()
-keyboard.modules.append(holdtap)
+modtap = ModTap()
+keyboard.modules.append(modtap)


 NONE = KC.NO
@@ -25,9 +25,9 @@ CAD = KC.LCTL(KC.LALT(KC.DEL))



-ZSFT = KC.HT(KC.Z, KC.LSFT, prefer_hold=True, tap_interrupted=False, tap_time=3000)
-SLSHSFT = KC.HT(KC.SLSH, KC.LSFT, prefer_hold=True, tap_interrupted=False, tap_time=3000)
-ALCTL = KC.HT(KC.A, KC.LCTRL, prefer_hold=False, tap_interrupted=False, tap_time=150)
+ZSFT = KC.MT(KC.Z, KC.LSFT, prefer_hold=True, tap_interrupted=False, tap_time=3000)
+SLSHSFT = KC.MT(KC.SLSH, KC.LSFT, prefer_hold=True, tap_interrupted=False, tap_time=3000)
+ALCTL = KC.MT(KC.A, KC.LCTRL, prefer_hold=False, tap_interrupted=False, tap_time=150)

 # flake8: noqa: E261
 keyboard.keymap = [
--- a/boards/ferris_sweep/kb.py
+++ b/boards/ferris_sweep/kb.py
@@ -3,12 +3,13 @@

 import board

-from storage import getmount
-
 from kmk.kmk_keyboard import KMKKeyboard as _KMKKeyboard
 from kmk.quickpin.pro_micro.kb2040 import pinout as pins
+
 from kmk.scanners.keypad import KeysScanner

+from storage import getmount
+
 # GPIO to key mapping - each line is a new row.
 # fmt: off
 _KEY_CFG_LEFT = [
--- a/boards/ferris_sweep/main.py
+++ b/boards/ferris_sweep/main.py
@@ -3,12 +3,11 @@
 # https://github.com/qmk/qmk_firmware/tree/master/keyboards/ferris/keymaps/default

 import board
-
 from kb import KMKKeyboard

 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
 from kmk.modules.mouse_keys import MouseKeys
 from kmk.modules.split import Split, SplitSide

@@ -28,7 +27,7 @@ split = Split(
 )

 layers_ext = Layers()
-holdtap = HoldTap()
+mod_tap = ModTap()
 mouse_key = MouseKeys()


@@ -40,12 +39,12 @@ XXXXXXX = KC.NO


 # Mod-taps
-A_SFT = KC.HT(KC.A, KC.LSFT)
-SCLN_SFT = KC.HT(KC.SCLN, KC.LSFT)
-X_CTL = KC.HT(KC.X, KC.LCTRL)
-C_ALT = KC.HT(KC.C, KC.LALT)
-COM_ALT = KC.HT(KC.COMM, KC.LALT)
-DOT_CTL = KC.HT(KC.DOT, KC.LCTRL)
+A_SFT = KC.MT(KC.A, KC.LSFT)
+SCLN_SFT = KC.MT(KC.SCLN, KC.LSFT)
+X_CTL = KC.MT(KC.X, KC.LCTRL)
+C_ALT = KC.MT(KC.C, KC.LALT)
+COM_ALT = KC.MT(KC.COMM, KC.LALT)
+DOT_CTL = KC.MT(KC.DOT, KC.LCTRL)
 CTL_ALT = KC.LCTRL(KC.LALT)


--- a/boards/fingerpunch/ffkb/other_pro_micro/main.py
+++ b/boards/fingerpunch/ffkb/other_pro_micro/main.py
@@ -6,8 +6,8 @@ from kmk.extensions.media_keys import MediaKeys
 from kmk.extensions.rgb import RGB
 from kmk.keys import KC
 from kmk.modules.encoder import EncoderHandler
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
 from kmk.modules.mouse_keys import MouseKeys

 keyboard = KMKKeyboard()
@@ -21,13 +21,13 @@ XXXXXXX = KC.NO
 # Adding extensions
 rgb = RGB(pixel_pin=keyboard.rgb_pixel_pin, num_pixels=keyboard.rgb_num_pixels, val_limit=50, hue_default=190, sat_default=100, val_default=5)

-holdtap = HoldTap()
+modtap = ModTap()
 layers = Layers()
 media_keys = MediaKeys()

 encoder_handler = EncoderHandler()

-keyboard.modules = [layers, holdtap]  #, encoder_handler]
+keyboard.modules = [layers, modtap]  #, encoder_handler]
 keyboard.modules.append(MouseKeys())
 keyboard.extensions = [rgb, media_keys]

@@ -46,14 +46,14 @@ MEDIA_BSPC = KC.LT(LYR_MEDIA, KC.BSPC)
 MOUSE_M = KC.LT(LYR_MOUSE, KC.M)

 # HOMEROW MODS
-LCTL_A = KC.HT(KC.A, KC.LCTRL)
-LGUI_R = KC.HT(KC.R, KC.LGUI)
-LALT_S = KC.HT(KC.S, KC.LALT)
-LSFT_T = KC.HT(KC.T, KC.LSFT)
-RSFT_N = KC.HT(KC.N, KC.RSFT)
-RALT_E = KC.HT(KC.E, KC.RALT)
-RGUI_I = KC.HT(KC.I, KC.RGUI)
-RCTL_O = KC.HT(KC.O, KC.RCTRL)
+LCTL_A = KC.MT(KC.A, KC.LCTRL)
+LGUI_R = KC.MT(KC.R, KC.LGUI)
+LALT_S = KC.MT(KC.S, KC.LALT)
+LSFT_T = KC.MT(KC.T, KC.LSFT)
+RSFT_N = KC.MT(KC.N, KC.RSFT)
+RALT_E = KC.MT(KC.E, KC.RALT)
+RGUI_I = KC.MT(KC.I, KC.RGUI)
+RCTL_O = KC.MT(KC.O, KC.RCTRL)

 # OTHER SHORTCUTS
 BRWSR_LFT = KC.LCTRL(KC.LSFT(KC.TAB))
--- a/boards/fourtypercentclub/gherkin/README.md
+++ b/boards/fourtypercentclub/gherkin/README.md
@@ -8,7 +8,7 @@ Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.c

 Extensions enabled by default  
 - [Layers](/docs/en/layers.md) Need more keys than switches? Use layers.
- [HoldTap](/docs/en/holdtap.md) Allows mod keys to act as different keys when tapped.
+- [ModTap](/docs/en/modtap.md) Allows mod keys to act as different keys when tapped.
 - [LED](/docs/en/led.md) Light your keys up

 Common Extensions
--- a/boards/fourtypercentclub/gherkin/main.py
+++ b/boards/fourtypercentclub/gherkin/main.py
@@ -2,17 +2,17 @@ from kb import KMKKeyboard

 from kmk.extensions.led import LED
 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap

 keyboard = KMKKeyboard()


-holdtap = HoldTap()
+modtap = ModTap()
 layers_ext = Layers()
 led = LED()
 keyboard.extensions = [led]
-keyboard.modules = [layers_ext, holdtap]
+keyboard.modules = [layers_ext, modtap]

 # Cleaner key names
 _______ = KC.TRNS
--- a/boards/gtips/reviung34/README.md
+++ b/boards/gtips/reviung34/README.md
@@ -0,0 +1,28 @@
+# Reviung34
+
+
+
+The Reviung34 is a 34 key keyboard designed by gtips, it is a slightly smaller
+version of the popular Reviung 39. These "split non-split" keyboards offer a lot
+of features split keyboards have in terms of comfort and ergonomics but do so in
+a single-piece package. Many people consider keyboards in this style easier to
+travel with since you don't have to manage two halves and there is of course no
+need for a TRRS cable. This board sits somewhere between and Atreus and Corne,
+and it is extremely comfortable to use.
+
+Hardware Availability: [PCB & Case Data](https://github.com/gtips/reviung/tree/master)
+
+Retailers (USA)  
+[Boardsource](https://boardsource.xyz/store)  
+
+Extensions enabled by default  
+- [Layers](/docs/en/layers.md) Need more keys than switches? Use layers.
+- [RGB matrix](/docs/en/peg_rgb_matrix.md) Light it up
+
+
+## Microcontroller support
+
+Update this line in `kb.py` to any supported microcontroller in `kmk/quickpin/pro_micro`:
+
+```python
+from kmk.quickpin.pro_micro.boardsource_blok import pinout as pins
--- a/boards/gtips/reviung34/kb.py
+++ b/boards/gtips/reviung34/kb.py
@@ -0,0 +1,37 @@
+import board
+
+from kmk.kmk_keyboard import KMKKeyboard as _KMKKeyboard
+from kmk.quickpin.pro_micro.boardsource_blok import pinout as pins
+from kmk.scanners import DiodeOrientation
+from kmk.scanners import intify_coordinate as ic
+
+
+class KMKKeyboard(_KMKKeyboard):
+    row_pins = (
+        pins[19],
+        pins[18],
+        pins[17],
+        pins[16]
+    )
+    col_pins = (
+        pins[6],
+        pins[7],
+        pins[8],
+        pins[9],
+        pins[10],
+        pins[15],
+        pins[14],
+        pins[13],
+        pins[12],
+      )
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = pins[0]
+    rgb_num_pixels = 9
+    led_key_pos = [0,1,2,3,8,4,5,6,7]
+    brightness_limit = 1.0
+    num_pixels = 9
+    coord_mapping = [
+     0,  1,  2,  3,  4,  5,  6,  7,  8, 32
+    ,9, 10, 11, 12, 13, 14, 15, 16, 17, 33
+    ,18,19, 20, 21, 22, 23, 24, 25, 26, 34
+    ,29,30,31,35]
--- a/boards/gtips/reviung34/main.py
+++ b/boards/gtips/reviung34/main.py
@@ -0,0 +1,49 @@
+from kb import KMKKeyboard
+
+from kmk.extensions.peg_rgb_matrix import Rgb_matrix
+from kmk.extensions.rgb import RGB
+from kmk.keys import KC
+from kmk.modules.layers import Layers
+
+keyboard = KMKKeyboard()
+
+# Adding extensions
+# ledmap
+rgb_ext = Rgb_matrix(ledDisplay=[[55,55,55],[55,55,55],[55,55,55],[55,55,55],[55,55,55],[55,55,55],[55,55,55],[55,55,55],[55,55,55]],split=False,rightSide=False,disable_auto_write=True)
+# ledmap
+layers_ext = Layers()
+
+keyboard.modules.append(layers_ext)
+keyboard.extensions.append(rgb_ext)
+
+# Cleaner key names
+_______ = KC.TRNS
+XXXXXXX = KC.NO
+
+LOWER = KC.MO(2)
+RAISE = KC.MO(1)
+
+keyboard.keymap = [
+    [  #QWERTY
+        KC.Q,    KC.W,    KC.E,    KC.R,    KC.T,                         KC.Y,    KC.U,    KC.I,    KC.O,   KC.P,\
+        KC.A,    KC.S,    KC.D,    KC.F,    KC.G,                         KC.H,    KC.J,    KC.K,    KC.L, KC.SCLN,\
+        KC.Z,    KC.X,    KC.C,    KC.V,    KC.B,                         KC.N,    KC.M, KC.COMM,  KC.DOT, KC.SLSH,\
+                                       LOWER,  KC.SPC,     KC.BSPC,    RAISE
+    ],
+    [  #RAISE
+        KC.N1,   KC.N2,   KC.N3,   KC.N4,   KC.N5,                        KC.N6,   KC.N7,   KC.N8,   KC.N9,   KC.N0,\
+        KC.TAB,  KC.LEFT, KC.DOWN, KC.UP,   KC.RGHT,                      XXXXXXX, KC.MINS, KC.EQL,  KC.LBRC, KC.RBRC,\
+        KC.LCTL, KC.GRV,  KC.LGUI, KC.LALT, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, KC.BSLS, KC.QUOT,\
+                                    XXXXXXX, XXXXXXX,      XXXXXXX, XXXXXXX
+    ],
+    [  #LOWER
+        KC.EXLM, KC.AT,   KC.HASH, KC.DLR,  KC.PERC,      KC.CIRC, KC.AMPR, KC.ASTR, KC.LPRN, KC.RPRN,\
+        KC.ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,      XXXXXXX, KC.UNDS, KC.PLUS, KC.LCBR, KC.RCBR,\
+        KC.CAPS, KC.TILD, XXXXXXX, XXXXXXX, XXXXXXX,      XXXXXXX, XXXXXXX, XXXXXXX, KC.PIPE,  KC.DQT,\
+                             XXXXXXX, XXXXXXX,      KC.ENT,  KC.DEL
+    ]
+]
+
+if __name__ == '__main__':
+    keyboard.go()
+
--- a/boards/gtips/reviung39/README.md
+++ b/boards/gtips/reviung39/README.md
@@ -17,7 +17,7 @@ Retailers (USA)
 Extensions enabled by default  
 - [Layers](/docs/en/layers.md) Need more keys than switches? Use layers.
 - [RGB](/docs/en/rgb.md) Light it up
- [HoldTap](/docs/en/holdtap.md) Allows mod keys to act as different keys when tapped.
+- [ModTap](/docs/en/modtap.md) Allows mod keys to act as different keys when tapped.

 Common Extensions
 - [Power](/docs/en/power.md) Powersaving features for battery life
--- a/boards/gtips/reviung39/kb.py
+++ b/boards/gtips/reviung39/kb.py
--- a/boards/gtips/reviung39/main.py
+++ b/boards/gtips/reviung39/main.py
@@ -2,18 +2,18 @@ from kb import KMKKeyboard

 from kmk.extensions.rgb import RGB
 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap

 keyboard = KMKKeyboard()

 # Adding extensions
 rgb = RGB(pixel_pin=keyboard.rgb_pixel_pin, num_pixels=keyboard.rgb_num_pixels, val_limit=100, hue_default=190, sat_default=100, val_default=5)

-holdtap = HoldTap()
+modtap = ModTap()
 layers_ext = Layers()

-keyboard.modules = [layers_ext, holdtap]
+keyboard.modules = [layers_ext, modtap]
 keyboard.extensions = [rgb]

 # Cleaner key names
--- a/boards/gtips/reviung41/README.md
+++ b/boards/gtips/reviung41/README.md
@@ -18,7 +18,7 @@ Retailers (USA)
 Extensions enabled by default  
 - [Layers](/docs/en/layers.md) Need more keys than switches? Use layers.
 - [RGB](/docs/en/rgb.md) Light it up
- [HoldTap](/docs/en/holdtap.md) Allows mod keys to act as different keys when tapped.
+- [ModTap](/docs/en/modtap.md) Allows mod keys to act as different keys when tapped.

 Common Extensions
 - [Power](/docs/en/power.md) Powersaving features for battery life
--- a/boards/gtips/reviung41/kb.py
+++ b/boards/gtips/reviung41/kb.py
--- a/boards/gtips/reviung41/main.py
+++ b/boards/gtips/reviung41/main.py
@@ -2,18 +2,18 @@ from kb import KMKKeyboard

 from kmk.extensions.rgb import RGB
 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap

 keyboard = KMKKeyboard()

 # Adding extensions
 rgb = RGB(pixel_pin=keyboard.rgb_pixel_pin, num_pixels=keyboard.rgb_num_pixels, val_limit=100, hue_default=190, sat_default=100, val_default=5)

-holdtap = HoldTap()
+modtap = ModTap()
 layers_ext = Layers()

-keyboard.modules = [layers_ext, holdtap]
+keyboard.modules = [layers_ext, modtap]
 keyboard.extensions = [rgb]

 # Cleaner key names
@@ -23,8 +23,8 @@ XXXXXXX = KC.NO
 LOWER = KC.MO(1)
 RAISE = KC.MO(2)
 ADJUST = KC.LT(3, KC.SPC)
-RSFT_ENT = KC.HT(KC.ENT, KC.RSFT)
-RSFT_SPC = KC.HT(KC.SPC, KC.RSFT)
+RSFT_ENT = KC.MT(KC.ENT, KC.RSFT)
+RSFT_SPC = KC.MT(KC.SPC, KC.RSFT)

 RGB_TOG = KC.RGB_TOG
 RGB_HUI = KC.RGB_HUI
--- a/boards/helix/kb.py
+++ b/boards/helix/kb.py
@@ -2,7 +2,6 @@ from kmk.kmk_keyboard import KMKKeyboard as _KMKKeyboard
 from kmk.quickpin.pro_micro.sparkfun_promicro_rp2040 import pinout as pins
 from kmk.scanners import DiodeOrientation

-
 class KMKKeyboard(_KMKKeyboard):
    col_pins = (
        pins[19],
--- a/boards/kyria/README.md
+++ b/boards/kyria/README.md
@@ -31,7 +31,7 @@ It has the following modules/extensions enabled:
 - [Split](/docs/en/split_keyboards.md) Connects halves using a wire
 - [Layers](/docs/en/layers.md) Do you need more keys than switches? Use
  layers.
- [HoldTap](/docs/en/holdtap.md) Enable press/hold double binding of keys
+- [ModTap](/docs/en/modtap.md) Enable press/hold double binding of keys
 - [MediaKeys](/docs/en/media_keys.md) Common media controls

 Also uncomment right section to enable samples of following:
--- a/boards/kyria/main.py
+++ b/boards/kyria/main.py
@@ -4,15 +4,15 @@ from kmk.extensions.media_keys import MediaKeys
 from kmk.extensions.rgb import RGB, AnimationModes
 from kmk.keys import KC
 from kmk.modules.encoder import EncoderHandler
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
 from kmk.modules.split import Split, SplitType

 keyboard = KMKKeyboard()
 keyboard.debug_enabled = True

 keyboard.modules.append(Layers())
-keyboard.modules.append(HoldTap())
+keyboard.modules.append(ModTap())
 keyboard.extensions.append(MediaKeys())

 # Using drive names (KYRIAL, KYRIAR) to recognize sides; use split_side arg if you're not doing it
@@ -33,10 +33,10 @@ keyboard.extensions.append(rgb_ext)

 # Edit your layout below
 # Currently, that's a default QMK Kyria Layout - https://config.qmk.fm/#/splitkb/kyria/rev1/LAYOUT
-ESC_LCTL = KC.HT(KC.ESC, KC.LCTL)
-QUOTE_RCTL = KC.HT(KC.QUOTE, KC.RCTL)
-ENT_LALT = KC.HT(KC.ENT, KC.LALT)
-MINUS_RCTL = KC.HT(KC.MINUS, KC.RCTL)
+ESC_LCTL = KC.MT(KC.ESC, KC.LCTL)
+QUOTE_RCTL = KC.MT(KC.QUOTE, KC.RCTL)
+ENT_LALT = KC.MT(KC.ENT, KC.LALT)
+MINUS_RCTL = KC.MT(KC.MINUS, KC.RCTL)
 keyboard.keymap = [
    [
        KC.TAB,        KC.Q,          KC.W,          KC.E,          KC.R,          KC.T,                                                                      KC.Y,          KC.U,          KC.I,          KC.O,          KC.P,          KC.BSPC,
--- a/boards/lunakey_pico/main.py
+++ b/boards/lunakey_pico/main.py
@@ -8,8 +8,8 @@ from kb import KMKKeyboard
 from kmk.extensions.media_keys import MediaKeys
 from kmk.extensions.RGB import RGB, AnimationModes
 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
 from kmk.modules.split import Split, SplitSide, SplitType

 led = digitalio.DigitalInOut(board.GP25)
@@ -20,7 +20,7 @@ keyboard = KMKKeyboard()
 keyboard.tap_time = 100

 layers_ext = Layers()
-holdtap_ext = HoldTap()
+modtap_ext = ModTap()

 # TODO Comment one of these on each side
 split_side = SplitSide.LEFT
@@ -43,7 +43,7 @@ rgb_ext = RGB(
    animation_mode=AnimationModes.BREATHING_RAINBOW
 )

-keyboard.modules = [layers_ext, holdtap_ext, split]
+keyboard.modules = [layers_ext, modtap_ext, split]
 keyboard.extensions.append(MediaKeys())
 keyboard.extensions.append(rgb_ext)

@@ -61,9 +61,9 @@ if split_side == SplitSide.LEFT:
 LOWER = KC.MO(1)
 RAISE = KC.MO(2)
 ADJUST = KC.MO(3)
-CT_TAB = KC.HT(KC.TAB, KC.LCTRL)
-CT_QUOT = KC.HT(KC.QUOT, KC.LCTRL)
-SF_MINS = KC.HT(KC.MINS, KC.LSHIFT)
+CT_TAB = KC.MT(KC.TAB, KC.LCTRL)
+CT_QUOT = KC.MT(KC.QUOT, KC.LCTRL)
+SF_MINS = KC.MT(KC.MINS, KC.LSHIFT)
 SG_PSCR = KC.LSFT(KC.LGUI(KC.PSCR))
 SF_PSCR = KC.LSFT(KC.PSCR)
 CG_RGHT = KC.LCTRL(KC.LGUI(KC.RGHT))
--- a/boards/rhymestone/README.md
+++ b/boards/rhymestone/README.md
@@ -14,7 +14,7 @@ Retailers (USA)
 Extensions enabled by default  
 - [Layers](/docs/en/layers.md) Need more keys than switches? Use layers.
 - [BLE_Split](/docs/en/split_keyboards.md) Connects halves without wires
- [HoldTap](/docs/en/holdtap.md) Allows mod keys to act as different keys when tapped.
+- [ModTap](/docs/en/modtap.md) Allows mod keys to act as different keys when tapped.

 Common Extensions
 - [Split](/docs/en/split_keyboards.md) Connects halves using a wire
--- a/boards/zodiark/main.py
+++ b/boards/zodiark/main.py
@@ -12,15 +12,15 @@ from kmk.extensions.peg_rgb_matrix import Rgb_matrix
 from kmk.handlers.sequences import send_string
 from kmk.hid import HIDModes
 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
 from kmk.modules.split import Split, SplitSide, SplitType

 keyboard = KMKKeyboard()
-holdtap = HoldTap()
+modtap = ModTap()
 layers_ext = Layers()
 keyboard.modules.append(layers_ext)
-keyboard.modules.append(holdtap)
+keyboard.modules.append(modtap)

 oled_ext = Oled(
    OledData(
--- a/boot.py
+++ b/boot.py
@@ -0,0 +1,3 @@
+import supervisor
+
+supervisor.set_next_stack_limit(4096 + 4096)
--- a/docs/en/Getting_Started.md
+++ b/docs/en/Getting_Started.md
@@ -2,8 +2,9 @@
 > Life was like a box of chocolates. You never know what you're gonna get.

 KMK is a keyboard focused layer that sits on top of [CircuitPython](https://circuitpython.org/). As such, it should work with most [boards that support CircuitPython](https://circuitpython.org/downloads). KMK requires CircuitPython version 7.0 or above.
-Known working and recommended devices can be found in the [list of officially supported microcontrollers](Officially_Supported_Microcontrollers.md)
+Known working and recommended devices can be found [here](Officially_Supported_Microcontrollers.md)

+<br>

 ## TL;DR Quick start guide
 > To infinity and beyond!
@@ -12,7 +13,7 @@ Known working and recommended devices can be found in the [list of officially su
 3. Unzip it and copy the KMK folder and the boot.py file at the root of the USB drive corresponding to your board (often appearing as CIRCUITPY)
 4. Create a new *code.py* or *main.py* file in the same root directory (same level as boot.py) with the example content hereunder: 

-***IMPORTANT:*** adapt the GP0 / GP1 pins to your specific board !
+***IMPORTANT:*** adapt the GP0 / GP1 pins to your specific board ! <br>

 ```
 print("Starting")
@@ -44,41 +45,39 @@ if __name__ == '__main__':

 6. If it prints the letter "a" (or a "Q" or ... depending on your keyboard layout), you're done!

+<br>


 ## Now that you're up and running, you may want to go further...
 > This is your last chance. After this, there is no turning back. You take the blue pill—the story ends, you wake up in your bed and believe whatever you want to believe. You take the red pill—you stay in Wonderland, and I show you how deep the rabbit hole goes. Remember: all I'm offering is the truth. Nothing more.

 ### You're extremely lucky and you have a fully supported keyboard
-If your keyboard and microcontroller are officially supported, simply visit the page for your files, and dropping them on the root of the "flash drive".
-Those pages can be found in the repositories [boards folder](https://github.com/KMKfw/kmk_firmware/tree/master/boards).
-You will need the `kb.py` and `main.py`. If you need more detailed instructions on how to customize the configuration settings and key mappings, please refer to the [config and keymap](config_and_keymap.md) documentation.
+If your keyboard and microcontroller are officially supported, simply visit the page for your files, and dropping them on the root of the "flash drive". Those pages can be found [here](https://github.com/KMKfw/kmk_firmware/tree/master/boards). You will need the `kb.py` and `main.py`. More advanced instructions can be found [here](config_and_keymap.md).

 ### You've got another, maybe DIY, board and want to customize KMK for it  
-First, be sure to understand how your device work, and particularly its specific matrix configuration. You can have a look at [how key matrices work](http://pcbheaven.com/wikipages/How_Key_Matrices_Works/) or read the [guide](https://docs.qmk.fm/#/hand_wire) provided by the QMK team for handwired keyboards
-Once you've got the gist of it:
- To start customizing your `code.py`/`main.py` file, please refer to the [config and keymap](config_and_keymap.md) and [keys](keys.md) files respectively, which provide detailed instructions on how to modify the configuration settings and key mappings.
+First, be sure to understand how your device work, and particularly its specific matrix configuration. You can have a look [here](http://pcbheaven.com/wikipages/How_Key_Matrices_Works/) or read the [guide](https://docs.qmk.fm/#/hand_wire) provided by the QMK team for handwired keyboards
+<br>Once you've got the gist of it:
+- You can have a look [here](config_and_keymap.md) and [here](keys.md) to start customizing your code.py / main.py file
 - There's a [reference](keycodes.md) of the available keycodes
 - [International](international.md) extension adds keys for non US layouts and [Media Keys](media_keys.md) adds keys for ... media

 And to go even further:
 - [Sequences](sequences.md) are used for sending multiple keystrokes in a single action
 - [Layers](layers.md) can transform the whole way your keyboard is behaving with a single touch
- [HoldTap](holdtap.md) allow you to customize the way a key behaves whether it is tapped or hold, and [TapDance](tapdance.md) depending on the number of times it is pressed
+- [ModTap](modtap.md) allow you to customize the way a key behaves whether it is tapped or hold, and [TapDance](tapdance.md) depending on the number of times it is pressed

 Want to have fun features such as RGB, split keyboards and more? Check out what builtin [modules](modules.md) and [extensions](extensions.md) can do!
 You can also get ideas from the various [user examples](https://github.com/KMKfw/kmk_firmware/tree/master/user_keymaps) that we provide and dig into our [documentation](README.md).

+<br>

 ## Additional help and support
 > Roads? Where we're going we don't need roads.

 In case you need it, debugging help can be found [here](debugging.md)

-For asynchronous support and chatter about KMK, [join our Zulip
-community](https://kmkfw.zulipchat.com)!
-
-If you ask for help in chat or open a bug report, if possible
+If you need support with KMK or just want to say hi, find us in 
+[#kmkfw:klar.sh on Matrix](https://matrix.to/#/#kmkfw:klar.sh).  This channel is 
+bridged to Discord [here](https://discordapp.com/widget?id=493256121075761173&theme=dark) 
+for convenience. If you ask for help in chat or open a bug report, if possible 
 make sure your copy of KMK is up-to-date.
-In particular, swing by the Zulip chat *before* opening a GitHub Issue about
-configuration, documentation, etc. concerns.
--- a/docs/en/README.md
+++ b/docs/en/README.md
@@ -25,7 +25,7 @@

 - [Combos](combos.md): Adds chords and sequences
 - [Layers](layers.md): Adds layer support (Fn key) to allow many more keys to be put on your keyboard
- [HoldTap](holdtap.md): Adds support for augmented modifier keys to act as one key when tapped, and modifier when held.
+- [ModTap](modtap.md): Adds support for augmented modifier keys to act as one key when tapped, and modifier when held.
 - [Mouse keys](mouse_keys.md): Adds mouse keycodes
 - [OneShot](oneshot.md): Adds support for oneshot/sticky keys.
 - [Power](power.md): Power saving features. This is mostly useful when on battery power.
--- a/docs/en/ble_hid.md
+++ b/docs/en/ble_hid.md
@@ -3,8 +3,8 @@ Bluetooth connections help clean up the wire mess!

 ## CircuitPython
 If not running KMKPython, this does require the adafruit_ble library from Adafruit.
-This can be downloaded from the
-[Adafruit CircuitPython BLE repository](https://github.com/adafruit/Adafruit_CircuitPython_BLE/tree/master/adafruit_ble).
+This can be downloaded
+[here](https://github.com/adafruit/Adafruit_CircuitPython_BLE/tree/master/adafruit_ble).
 It is part of the [Adafruit CircuitPython Bundle](https://github.com/adafruit/Adafruit_CircuitPython_Bundle).
 Simply put this in the "root" of your CircuitPython device. If unsure, it's the folder with main.py in it, and should be the first folder you see when you open the device.

--- a/docs/en/capsword.md
+++ b/docs/en/capsword.md
@@ -1,6 +1,6 @@
 # CapsWord
 The CapsWord module functions similar to caps lock but will deactivate automatically when its encounters a key that breaks the word or after inactivity timeout.
-By default it will not deactivate CapsWord on numbers, alphabets, underscore, modifiers, minus, backspace and other keys like HoldTap, Layers, etc.
+By default it will not deactivate CapsWord on numbers, alphabets, underscore, modifiers, minus, backspace and other keys like ModTap, Layers, etc.
 Add it to your keyboard's modules list with:

 ```python
--- a/docs/en/contributing.md
+++ b/docs/en/contributing.md
@@ -6,7 +6,8 @@ to make contributing as easy as possible for everyone while maintaining a consis
 ## Contributing Code
 The following guidelines should ensure that any code contributed can be merged in as 
 painlessly as possible. If you're unsure how to set up your development environment, 
-feel free to [join our Zulip community](https://kmkfw.zulipchat.com).
+feel free to join the chat, [#kmkfw:klar.sh on Matrix](https://matrix.to/#/#kmkfw:klar.sh). 
+This channel is bridged to Discord [here](https://discord.gg/QBHUUpeGUd) for convenience.

 ### Code Style

@@ -27,12 +28,7 @@ to Black formatting as documented in `pyproject.toml`)
 Unit tests within the `tests` folder mock various CircuitPython modules to allow
 them to be executed in a desktop development environment.

-Execute tests using the command `make unit-tests`. The unit-tests target accepts
-an optional environment variable for specifying a subset of tests with python
-unittest syntax:
-```sh
-make unit-tests TESTS="tests.test_capsword tests.test_hold_tap"
-```
+Execute tests using the command `python -m unittest`.

 ## Contributing Documentation
 While KMK welcomes documentation from anyone with and understanding of the issues 
@@ -40,8 +36,8 @@ and a willingness to write them up, it's a good idea to familiarize yourself wit
 the docs. Documentation should be informative but concise.

 ### Styling
-Docs are written and rendered in GitHub Markdown.
-Check out this comprehensive [guide to basic writing and formatting syntax](https://docs.github.com/en/get-started/writing-on-github/getting-started-with-writing-and-formatting-on-github/basic-writing-and-formatting-syntax) from GitHub's documentation.
+Docs are written and rendered in GitHub Markdown. A comprehensive guide to GitHub's 
+Markdown can be found [here](https://docs.github.com/en/get-started/writing-on-github/getting-started-with-writing-and-formatting-on-github/basic-writing-and-formatting-syntax).

 In particular, KMK's docs should include a title, demarcated with `#`, and subheadings 
 should be demarcated with `##`, `###`, and so on. Headings should be short and specific.
--- a/docs/en/encoder.md
+++ b/docs/en/encoder.md
@@ -23,7 +23,7 @@ Here is all you need to use this module in your `main.py` / `code.py` file.
 ```python
 from kmk.modules.encoder import EncoderHandler
 encoder_handler = EncoderHandler()
-keyboard.modules = [layers, holdtap, encoder_handler]
+keyboard.modules = [layers, modtap, encoder_handler]
 ```

 2. Define the pins for each encoder: `pin_a`, `pin_b` for rotations, `pin_button` for the switch in the encoder. Set switch to `None` if the encoder's button is handled differently (as a part of matrix for example) or not at all. If you want to invert the direction of the encoder, set the 4th (optional) parameter `is_inverted` to `True`. 5th parameter is [encoder divisor](#encoder-resolution) (optional), it can be either `2` or `4`.
--- a/docs/en/extension_stringy_keymaps.md
+++ b/docs/en/extension_stringy_keymaps.md
@@ -1,7 +1,6 @@
 # Stringy Keymaps

-Enables referring to keys by `'NAME'` rather than `KC.NAME`.\
-This extension allows for a seamless integration of both string-based key references and standard keycodes.
+Enables referring to keys by `'NAME'` rather than `KC.NAME`.

 For example:

@@ -14,9 +13,6 @@ from kmk.extensions.stringy_keymaps import StringyKeymaps
 # Indexed
 # keyboard.keymap = [[ KC['A'], KC['B'], KC['RESET'] ]]

-# String names mixed with normal keycodes
-# keyboard.keymap = [[ 'A' , KC.B, KC.RESET ]]
-
 # String names
 keyboard.keymap = [[ 'A' , 'B', 'RESET' ]]

@@ -31,5 +27,3 @@ keyboard.extensions.append(stringyKeymaps)

 It should be noted that these are **not** ASCII. The string is **not** what
 will be sent to the computer. The examples above have no functional difference.
-
-When utilizing argumented keys, such as `KC.MO(layer)`, it's not possible to use a string like `'MO(layer)'` instead employ the standard notation of e.g. `KC.MO(1)` in your keymap.
--- a/docs/en/flashing.md
+++ b/docs/en/flashing.md
@@ -9,7 +9,9 @@ Linux).
 Given `make` and `rsync` are available on your system (in `$PATH`), the
 following will copy the `kmk` tree to your CircuitPython device, and will copy
 the file defined as `USER_KEYMAP` as your `main.py`. It will also copy our
-`boot.py`. If any of these files exist on your CircuitPython device already, they
+`boot.py`, which allocates a larger stack size (simply - more of the device's
+RAM will be available to KMK and your keyboard config) than CircuitPython's
+default. If any of these files exist on your CircuitPython device already, they
 will be overwritten without a prompt.

 If you get permissions errors here, **don't run make as root or with sudo**. See
@@ -24,8 +26,9 @@ make MOUNTPOINT=/media/CIRCUITPY USER_KEYMAP=user_keymaps/nameofyourkeymap.py BO

 Check to see if your drive may have mounted elsewhere with a GUI tool or other
 automounter. Most of these tools will mount your device under `/media`, probably
-as `/media/CIRCUITPY`.  If it's not mounted, you can read up on how to [mount a
-drive manually](https://wiki.archlinux.org/index.php/File_systems#Mount_a_file_system).
+as `/media/CIRCUITPY`.  If it's not mounted, you can read up on how to mount a
+drive manually
+[here](https://wiki.archlinux.org/index.php/File_systems#Mount_a_file_system).

 For example,

--- a/docs/en/handwiring.md
+++ b/docs/en/handwiring.md
@@ -1,6 +1,6 @@
 # Handwire keyboards
 This guide will not talk about the physical wiring. Check out our 
 [recommended microcontrollers](Officially_Supported_Microcontrollers.md) and 
-follow this amazing [hand wiring guide](https://docs.qmk.fm/#/hand_wire). That 
+follow the amazing guide for that [here](https://docs.qmk.fm/#/hand_wire). That 
 guide can be followed until you are setting up the firmware. After wiring the 
 keyboard, you can refer to our porting guide [here](porting_to_kmk.md)
--- a/docs/en/kmkpython_vs_circuitpython.md
+++ b/docs/en/kmkpython_vs_circuitpython.md
@@ -15,7 +15,7 @@ the box.

 ### CircuitPython
 CircuitPython can be installed by following this guide using the guide
-for [installing circuit python](https://learn.adafruit.com/welcome-to-circuitpython/installing-circuitpython). 
+[here](https://learn.adafruit.com/welcome-to-circuitpython/installing-circuitpython). 
 It's recommended to run the latest stable version that is at least 5.0 or higher.
 Beta versions may work, but expect limited support.
 #### Notable differences include
--- a/docs/en/layers.md
+++ b/docs/en/layers.md
@@ -21,7 +21,7 @@ keyboard.modules.append(Layers())

 ## Custom HoldTap Behavior
 `KC.TT` and `KC.LT` use the same heuristic to determine taps and holds as
-HoldTap. Check out the [HoldTap doc](holdtap.md) to find out more.
+ModTap. Check out the [ModTap doc](modtap.md) to find out more.

 ## Working with Layers
 When starting out, care should be taken when working with layers, since it's possible to lock 
@@ -84,7 +84,7 @@ class Layers(_Layers):
 	last_top_layer = 0
 	hues = (4, 20, 69)
 	
-	def after_hid_send(self, keyboard):
+	def after_hid_send(keyboard):
 		if keyboard.active_layers[0] != self.last_top_layer:
 			self.last_top_layer = keyboard.active_layers[0]
 			rgb.set_hsv_fill(self.hues[self.last_top_layer], 255, 255)
--- a/docs/en/holdtap.md
+++ b/docs/en/holdtap.md
@@ -1,39 +1,39 @@
-# HoldTap Keycodes
-Enabling HoldTap will give you access to the following keycodes and can simply be
+# ModTap Keycodes
+Enabling ModTap will give you access to the following keycodes and can simply be
 added to the modules list.

 ```python
-from kmk.modules.holdtap import HoldTap
-holdtap = HoldTap()
+from kmk.modules.modtap import ModTap
+modtap = ModTap()
 # optional: set a custom tap timeout in ms
-# holdtap.tap_time = 300
-keyboard.modules.append(holdtap)
+# modtap.tap_time = 300
+keyboard.modules.append(modtap)
 ```

 ## Keycodes

 |New Keycode                                              | Description                                                     |
 |---------------------------------------------------------|-----------------------------------------------------------------|
-|`LCTL = KC.HT(KC.SOMETHING, KC.LCTRL)`                   |`LCTRL` if held `kc` if tapped                                   |
-|`LSFT = KC.HT(KC.SOMETHING, KC.LSFT)`                    |`LSHIFT` if held `kc` if tapped                                  |
-|`LALT = KC.HT(KC.SOMETHING, KC.LALT)`                    |`LALT` if held `kc` if tapped                                    |
-|`LGUI = KC.HT(KC.SOMETHING, KC.LGUI)`                    |`LGUI` if held `kc` if tapped                                    |
-|`RCTL = KC.HT(KC.SOMETHING, KC.RCTRL)`                   |`RCTRL` if held `kc` if tapped                                   |
-|`RSFT = KC.HT(KC.SOMETHING, KC.RSFT)`                    |`RSHIFT` if held `kc` if tapped                                  |
-|`RALT = KC.HT(KC.SOMETHING, KC.RALT)`                    |`RALT` if held `kc` if tapped                                    |
-|`RGUI = KC.HT(KC.SOMETHING, KC.RGUI)`                    |`RGUI` if held `kc` if tapped                                    |
-|`SGUI = KC.HT(KC.SOMETHING, KC.LSHFT(KC.LGUI))`          |`LSHIFT` and `LGUI` if held `kc` if tapped                       |
-|`LCA = KC.HT(KC.SOMETHING, KC.LCTRL(KC.LALT))`           |`LCTRL` and `LALT` if held `kc` if tapped                        |
-|`LCAG = KC.HT(KC.SOMETHING, KC.LCTRL(KC.LALT(KC.LGUI)))` |`LCTRL` and `LALT` and `LGUI` if held `kc` if tapped             |
-|`MEH = KC.HT(KC.SOMETHING, KC.LCTRL(KC.LSFT(KC.LALT)))`  |`CTRL` and `LSHIFT` and `LALT` if held `kc` if tapped            |
-|`HYPR = KC.HT(KC.SOMETHING, KC.HYPR)`                    |`LCTRL` and `LSHIFT` and `LALT` and `LGUI` if held `kc` if tapped|
+|`LCTL = KC.MT(KC.SOMETHING, KC.LCTRL)`                   |`LCTRL` if held `kc` if tapped                                   |
+|`LSFT = KC.MT(KC.SOMETHING, KC.LSFT)`                    |`LSHIFT` if held `kc` if tapped                                  |
+|`LALT = KC.MT(KC.SOMETHING, KC.LALT)`                    |`LALT` if held `kc` if tapped                                    |
+|`LGUI = KC.MT(KC.SOMETHING, KC.LGUI)`                    |`LGUI` if held `kc` if tapped                                    |
+|`RCTL = KC.MT(KC.SOMETHING, KC.RCTRL)`                   |`RCTRL` if held `kc` if tapped                                   |
+|`RSFT = KC.MT(KC.SOMETHING, KC.RSFT)`                    |`RSHIFT` if held `kc` if tapped                                  |
+|`RALT = KC.MT(KC.SOMETHING, KC.RALT)`                    |`RALT` if held `kc` if tapped                                    |
+|`RGUI = KC.MT(KC.SOMETHING, KC.RGUI)`                    |`RGUI` if held `kc` if tapped                                    |
+|`SGUI = KC.MT(KC.SOMETHING, KC.LSHFT(KC.LGUI))`          |`LSHIFT` and `LGUI` if held `kc` if tapped                       |
+|`LCA = KC.MT(KC.SOMETHING, KC.LCTRL(KC.LALT))`           |`LCTRL` and `LALT` if held `kc` if tapped                        |
+|`LCAG = KC.MT(KC.SOMETHING, KC.LCTRL(KC.LALT(KC.LGUI)))` |`LCTRL` and `LALT` and `LGUI` if held `kc` if tapped             |
+|`MEH = KC.MT(KC.SOMETHING, KC.LCTRL(KC.LSFT(KC.LALT)))`  |`CTRL` and `LSHIFT` and `LALT` if held `kc` if tapped            |
+|`HYPR = KC.MT(KC.SOMETHING, KC.HYPR)`                    |`LCTRL` and `LSHIFT` and `LALT` and `LGUI` if held `kc` if tapped|

 ## Custom HoldTap Behavior
-The full HoldTap signature is as follows:
+The full ModTap signature is as follows:
 ```python
-KC.HT(KC.TAP, KC.HOLD, prefer_hold=True, tap_interrupted=False, tap_time=None, repeat=HoldTapRepeat.NONE)
+KC.MT(KC.TAP, KC.HOLD, prefer_hold=True, tap_interrupted=False, tap_time=None, repeat=HoldTapRepeat.NONE)
 ```
-* `prefer_hold`: decides which keycode the HoldTap key resolves to when another
+* `prefer_hold`: decides which keycode the ModTap key resolves to when another
  key is pressed before the timeout finishes. When `True` the hold keycode is
  chosen, the tap keycode when `False`.
 * `tap_interrupted`: decides if the timeout will interrupt at the first other
@@ -48,4 +48,4 @@ KC.HT(KC.TAP, KC.HOLD, prefer_hold=True, tap_interrupted=False, tap_time=None, r
  * `NONE`: no repeat action (default), everything works as expected.
  The `HoldTapRepeat` enum must be imported from `kmk.modules.holdtap`.

-Each of these parameters can be set for every HoldTap key individually.
+Each of these parameters can be set for every ModTap key individually.
--- a/docs/en/modules.md
+++ b/docs/en/modules.md
@@ -10,7 +10,7 @@ modules are
 - [Combos](combos.md): Adds chords and sequences
 - [Layers](layers.md): Adds layer support (Fn key) to allow many more keys to be
 put on your keyboard.
- [HoldTap](holdtap.md): Adds support for augmented modifier keys to act as one key
+- [ModTap](modtap.md): Adds support for augmented modifier keys to act as one key
 when tapped, and modifier when held.
 - [Mouse keys](mouse_keys.md): Adds mouse keycodes.
 - [OneShot](oneshot.md): Adds support for oneshot/sticky keys.
--- a/docs/en/mouse_keys.md
+++ b/docs/en/mouse_keys.md
@@ -15,8 +15,6 @@ keyboard.modules.append(MouseKeys())
 | `KC.MB_LMB`               | Left mouse button                    |
 | `KC.MB_RMB`               | Right mouse button                   |
 | `KC.MB_MMB`               | Middle mouse button                  |
-| `KC.MB_BTN4`              | mouse button 4                       |
-| `KC.MB_BTN5`              | mouse button 5                       |
 | `KC.MW_UP`                | Mouse wheel up                       |
 | `KC.MW_DOWN`, `KC.MW_DN`  | Mouse wheel down                     |
 | `KC.MS_UP`                | Move mouse cursor up                 |
--- a/docs/en/oneshot.md
+++ b/docs/en/oneshot.md
@@ -35,12 +35,12 @@ KC.OS(
    )
 ```

-
 ## OneShot Modifier Combinations

-The OneShot keys can be chained. In this example if you press `OS_LCTL` and then `OS_LSFT` followed by `KC.TAB`, the output will be `ctrl+shift+tab`.
+The OneShot module by default cannot apply two OneShot modifiers to another key. To get around this you can use the [Combos](combos.md) module. Below is a minimal example that allows for multiple OneShot modifiers to apply to the next key pressed. In this example you can tap either of the OneShot keys then tap the other and finally tap `p` and that will send `ctrl+shift+p`.

 ```python
+from kmk.modules.combos import Chord, Combos
 from kmk.modules.oneshot import OneShot

 oneshot = OneShot()
@@ -48,8 +48,58 @@ keyboard.modules.append(oneshot)

 OS_LCTL = KC.OS(KC.LCTL, tap_time=None)
 OS_LSFT = KC.OS(KC.LSFT, tap_time=None)
+OS_LCTL_LSFT = KC.OS(KC.LCTL(OS_LSFT), tap_time=None)

-keyboard.keymap = [[OS_LSFT, OS_LCTL, KC.TAB]]
+combos = Combos()
+keyboard.modules.append(combos)
+
+combos.combos = [
+    Chord((OS_LCTL, OS_LSFT), OS_LCTL_LSFT, timeout=1000),
+]
+
+keyboard.keymap = [[OS_LSFT, OS_LCTL, KC.P]]
 ```

+Below is the complete list of OneShot and Chords you need to allow any combination of modifiers (left modifiers only).
+
+> <details>
+>     <summary>Long code chunk (click to load)</summary>
+> 
+>     ```python
+>     OS_LCTL = KC.OS(KC.LCTL, tap_time=None)
+>     OS_LSFT = KC.OS(KC.LSFT, tap_time=None)
+>     OS_LGUI = KC.OS(KC.LGUI, tap_time=None)
+>     OS_LALT = KC.OS(KC.LALT, tap_time=None)
+> 
+>     OS_LCTL_LSFT = KC.OS(KC.LCTL(OS_LSFT), tap_time=None)
+>     OS_LCTL_LALT = KC.OS(KC.LCTL(OS_LALT), tap_time=None)
+>     OS_LCTL_LGUI = KC.OS(KC.LCTL(OS_LGUI), tap_time=None)
+>     OS_LSFT_LALT = KC.OS(KC.LSFT(OS_LALT), tap_time=None)
+>     OS_LSFT_LGUI = KC.OS(KC.LSFT(OS_LGUI), tap_time=None)
+>     OS_LALT_LGUI = KC.OS(KC.LALT(OS_LGUI), tap_time=None)
+> 
+>     OS_LCTL_LSFT_LGUI = KC.OS(KC.LCTL(KC.LSFT(OS_LGUI)), tap_time=None)
+>     OS_LCTL_LSFT_LALT = KC.OS(KC.LCTL(KC.LSFT(OS_LALT)), tap_time=None)
+>     OS_LCTL_LALT_LGUI = KC.OS(KC.LCTL(KC.LALT(OS_LGUI)), tap_time=None)
+>     OS_LSFT_LALT_LGUI = KC.OS(KC.LSFT(KC.LALT(OS_LGUI)), tap_time=None)
+> 
+>     OS_LCTL_LSFT_LALT_LGUI = KC.OS(KC.LCTL(KC.LSFT(KC.LALT(OS_LGUI))), tap_time=None)
+> 
+>     combos.combos = [
+>         Chord((OS_LCTL, OS_LSFT), OS_LCTL_LSFT, timeout=1000),
+>         Chord((OS_LCTL, OS_LALT), OS_LCTL_LALT, timeout=1000),
+>         Chord((OS_LCTL, OS_LGUI), OS_LCTL_LGUI, timeout=1000),
+>         Chord((OS_LSFT, OS_LALT), OS_LSFT_LALT, timeout=1000),
+>         Chord((OS_LSFT, OS_LGUI), OS_LSFT_LGUI, timeout=1000),
+>         Chord((OS_LALT, OS_LGUI), OS_LALT_LGUI, timeout=1000),
+> 
+>         Chord((OS_LCTL, OS_LSFT, OS_LGUI), OS_LCTL_LSFT_LGUI, timeout=1000),
+>         Chord((OS_LCTL, OS_LSFT, OS_LALT), OS_LCTL_LSFT_LALT, timeout=1000),
+>         Chord((OS_LCTL, OS_LALT, OS_LGUI), OS_LCTL_LALT_LGUI, timeout=1000),
+>         Chord((OS_LSFT, OS_LALT, OS_LGUI), OS_LSFT_LALT_LGUI, timeout=1000),
+> 
+>         Chord((OS_LCTL, OS_LSFT, OS_LALT, OS_LGUI), OS_LCTL_LSFT_LALT_LGUI, timeout=1000),
+>     ]
+>     ```
+> 
 > </details>
--- a/docs/en/peg_oled_display.md
+++ b/docs/en/peg_oled_display.md
@@ -17,7 +17,7 @@ To use this you need to make some changes to your kb.py as well as you main.py I
 You need these frozen into your circuitpython or in a lib folder at the root of your drive.
 * [Adafruit_CircuitPython_DisplayIO_SSD1306](https://github.com/adafruit/Adafruit_CircuitPython_DisplayIO_SSD1306)
 * [Adafruit_CircuitPython_Display_Text](https://github.com/adafruit/Adafruit_CircuitPython_Display_Text)
-* [Download .mpy versions from Adafruit_CircuitPython_Bundle](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/download/20220415/adafruit-circuitpython-bundle-7.x-mpy-20220415.zip)
+* [Download .mpy versions from here](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/download/20220415/adafruit-circuitpython-bundle-7.x-mpy-20220415.zip)


 ## kb.py
--- a/docs/en/peg_rgb_matrix.md
+++ b/docs/en/peg_rgb_matrix.md
@@ -30,7 +30,7 @@ Currently this extension does not support changing LEDs at runtime, as a result
 The following libraries must be frozen in your CircuitPython distribution or in a 'lib' folder at the root of your drive.

 * [Adafruit_CircuitPython_NeoPixel](https://github.com/adafruit/Adafruit_CircuitPython_NeoPixel)
-* [Download .mpy versions from Adafruit_CircuitPython_Bundle](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/download/20220415/adafruit-circuitpython-bundle-7.x-mpy-20220415.zip)
+* [Download .mpy versions from here](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/download/20220415/adafruit-circuitpython-bundle-7.x-mpy-20220415.zip)

 ## Required Changes to main.py and kb.py

--- a/docs/en/porting_to_kmk.md
+++ b/docs/en/porting_to_kmk.md
@@ -126,4 +126,4 @@ if __name__ == '__main__':
 ```

 ## More information
-More information on keymaps can be found in the [config and keymap](config_and_keymap.md) documentation.
+More information on keymaps can be found [here](config_and_keymap.md)
--- a/docs/en/quickpin.md
+++ b/docs/en/quickpin.md
@@ -15,7 +15,7 @@ microcontrollers with only a single line change and less mistakes.

 ## Pro micro footprint pinout

-![pro micro footprint pins](pro_micro_pinout.png)
+![pro micro footprint pins](../img/pro_micro_pinout.png)

 ## Example

--- a/docs/en/split_keyboards.md
+++ b/docs/en/split_keyboards.md
@@ -2,7 +2,7 @@
 Split keyboards are mostly the same as unsplit. Wired UART is fully supported,
 and testing of Bluetooth splits, though we don't currently offer support for this.

-Notice that this Split module must be added after the HoldTap module to the keyboard.modules.
+Notice that this Split module must be added after the ModTap module to the keyboard.modules.

 ## Drive names
 As you will have two circuitpython drives to update regularly, it is adviced to rename them to make
--- a/docs/en/support.md
+++ b/docs/en/support.md
@@ -1,9 +1,9 @@
 # Support

-For asynchronous support and chatter about KMK, [join our Zulip
-community](https://kmkfw.zulipchat.com)!
+If you need support with KMK or just want to say hi, find us in [#kmkfw:klar.sh
+on Matrix](https://matrix.to/#/#kmkfw:klar.sh). This channel is bridged to
+Discord [here](https://discordapp.com/widget?id=493256121075761173&theme=dark)
+for convenience.

 If you ask for help in chat or open a bug report, if possible
 make sure your copy of KMK is up-to-date.
-In particular, swing by the Zulip chat *before* opening a GitHub Issue about
-configuration, documentation, etc. concerns.
--- a/docs/en/tapdance.md
+++ b/docs/en/tapdance.md
@@ -46,7 +46,7 @@ EXAMPLE_TD = KC.TD(
    # Tap once for "a"
    KC.A,
    # Tap twice for "b", or tap and hold for "left control"
-    KC.HT(KC.B, KC.LCTL, prefer_hold=False),
+    KC.MT(KC.B, KC.LCTL, prefer_hold=False),
    # Tap three times to send a raw string via macro
    send_string('macros in a tap dance? I think yes'),
    # Tap four times to toggle layer index 1, tap 3 times and hold for 3s to
--- a/docs/img/pro_micro_pinout.png
+++ b/docs/img/pro_micro_pinout.png
--- a/docs/ja/Getting_Started.md
+++ b/docs/ja/Getting_Started.md
@@ -9,6 +9,7 @@ KMK は[CircuitPython](https://circuitpython.org/)の上に配置されるキー

 CircuitPython の最適化バージョン（特定のボードの容量制限に対処した、プリインストールされた関連モジュールの選択が可能なバージョン）も提供しています。

+<br>

 ## TL;DR クイックスタートガイド
 > To infinity and beyond!
@@ -24,7 +25,7 @@ CircuitPython の最適化バージョン（特定のボードの容量制限に

 4. 同じルートディレクトリー（boot.py と同レベル）に新規で*code.py* または *main.py*のファイルを作成する。中身は以下の例とする。

-***重要：*** GP0 / GP1 ピンを使用ボードに合わせて下さい
+***重要：*** GP0 / GP1 ピンを使用ボードに合わせて下さい！<br>


 ```
@@ -55,6 +56,8 @@ if __name__ == '__main__':

 2. "A"や"Q"(キーボードのレイアウトによって異なる)が表示されたら、完成！

+<br>
+

 ## とりあえず一通り動くようになったので、もっとに先へ進みたい場合
 > This is your last chance. After this, there is no turning back. You take the blue pill—the story ends, you wake up in your bed and believe whatever you want to believe. You take the red pill—you stay in Wonderland, and I show you how deep the rabbit hole goes. Remember: all I'm offering is the truth. Nothing more.
@@ -69,7 +72,7 @@ if __name__ == '__main__':
 最初にデバイスの動作や具体的なマトリックス構成についてしっかり理解してください。
 QMK チームが提供している手配線キーボード用の[ガイド](https://docs.qmk.fm/#/hand_wire)と[ドキュメント](http://pcbheaven.com/wikipages/How_Key_Matrices_Works/) を確認できます。

-要旨をつかめてきたら：
+<br>要旨をつかめてきたら：
 - [ここ](config_and_keymap.md) と [ここ](keys.md)を見て、code.py / main.py ファイルをカスタイマイズできます。

 - 使用可能なキーコードの[リファレンス](keycodes.md)があります。
@@ -80,19 +83,21 @@ QMK チームが提供している手配線キーボード用の[ガイド](http
 - [シーケンス](sequences.md) 一つのアクションで複数のキーストロークを送信するために使用します。
 - [レイヤー](layers.md)でタッチ一つでキーボードの全体の動きを変えることができます。

- [モドタップ](holdtap.md) でキーの押し/長押しの動作を設定し、何回押されたかによって[タップダンス](tapdance.md)を設定します。
+- [モドタップ](modtap.md) でキーの押し/長押しの動作を設定し、何回押されたかによって[タップダンス](tapdance.md)を設定します。

 RGB や分裂型などの機能を楽しめたい場合は、ビルトイン[モジュール](modules.md)と[拡張機能](extensions.md)を見てみてください！

 私たちが提供する、いろんな [ユーザー事例](https://github.com/KMKfw/user_keymaps)や[ドキュメント](https://github.com/KMKfw/kmk_firmware/tree/master/docs)からアイデアを得ることもできます。

+<br>

 ## ヘルプ/サポート
 > Roads? Where we're going we don't need roads.

 デバッグについてのヘルプが必要な場合は[こちら](debugging.md)。

-KMK についてサポートが必要な場合や、コミュニケーションをとりたい場合は[こちら](https://kmkfw.zulipchat.com)。
+KMK についてサポートが必要な場合や、コミュニケーションをとりたい場合は[こちら](https://matrix.to/#/#kmkfw:klar.sh)。
+このチャネルは[Discord](https://discordapp.com/widget?id=493256121075761173&theme=dark) からも見ることができます。

 チャットで助けを求める場合やバグ レポートを開く場合は、可能であれば KMK
 のコピーが最新であることを確認してください。
--- a/docs/ptBR/Getting_Started.md
+++ b/docs/ptBR/Getting_Started.md
@@ -13,6 +13,7 @@ Também fornecemos uma versão de CircuitPython otimizada para teclados
 (simplificada para lidar com os limites de certas placas e com a seleção dos
 módulos relevantes pré-instalados). Se você estiver se perguntando por que usar

+<br>

 ## Guia Rápido
 > Ao Infinito e Além!
@@ -29,7 +30,7 @@ módulos relevantes pré-instalados). Se você estiver se perguntando por que us
 4. Crie um novo arquivo *code.py* ou *main.py* no mesmo diretório raiz (no
   mesmo nível de boot.py) com o exemplo contido abaixo:

-***IMPORTANTE:*** adapte os pinos GP0 / GP1 para a tua placa específica!
+***IMPORTANTE:*** adapte os pinos GP0 / GP1 para a tua placa específica! <br>

 ```
 print("Starting")
@@ -60,6 +61,7 @@ if __name__ == '__main__':
 6. Se ela imprimir um "A" (ou um "Q" ou o que depender do teu layout de
   teclado), você conseguiu!

+<br>


 ## Agora que tudo está no seu lugar, você pode querer ir além...
@@ -86,7 +88,7 @@ sua configuração matricial específica. Você pode observar
 [guia](https://docs.qmk.fm/#/hand_wire) feito pelo time da QMK para teclados
 artesanais.

-Uma vez que você compreendeu a essência da coisa:
+<br>Uma vez que você compreendeu a essência da coisa:
 - Você pode dar uma olhada [aqui](config_and_keymap.md) e [aqui](keys.md) para
  começar a customizar seu arquivo code.py / main.py.
 - Eis uma [referência](keycodes.md) dos códigos de teclas (*keycodes*)
@@ -101,7 +103,7 @@ E para ir mais além:
  só.
 - [Camadas](layers.md) podem transformar totalmente como seu teclado age com um
  simples toque.
- [HoldTap](holdtap.md) te permite customizar a maneira que uma tecla age quando é
+- [ModTap](modtap.md) te permite customizar a maneira que uma tecla age quando é
  pressionada ou "segurada"; e o
 - [TapDance](tapdance.md) dependendo do número de vezes que ela é pressionada.

@@ -113,6 +115,7 @@ Você também pode obter ideias dos vários [exemplos de
 usuários](https://github.com/KMKfw/user_keymaps) que fornecemos e fuce nossa
 [documentação](https://github.com/KMKfw/kmk_firmware/tree/master/docs).

+<br>

 ## Ajuda e Suporte Adicionais
 > Estradas? Para onde vamos, estradas são desnecessárias.
@@ -120,6 +123,8 @@ usuários](https://github.com/KMKfw/user_keymaps) que fornecemos e fuce nossa
 Caso precise, ajuda para depuração pode ser encontrada [aqui](debugging.md).

 Se você precisa de suporte com o KMK ou quer somente dizer oi, encontre-nos no
-canal [kmkfw no Zulip](https://kmkfw.zulipchat.com).
-Se você precisa de ajuda ou pretende abrir um bug report, se
+canal [#kmkfw:klar.sh no Matrix](https://matrix.to/#/#kmkfw:klar.sh). Este canal
+tem uma ponte no Discord
+[aqui](https://discordapp.com/widget?id=493256121075761173&theme=dark) por
+conveniência. Se você precisa de ajuda ou pretende abrir um bug report, se
 possível se possível, verifique se sua cópia do KMK está atualizada.
--- a/docs/ptBR/holdtap.md
+++ b/docs/ptBR/holdtap.md
@@ -1,27 +1,27 @@
-# Keycodes HoldTap
+# Keycodes ModTap

-Habilitar o HoldTap (adicionando-o à lista de módulos) te dará acesso aos
+Habilitar o ModTap (adicionando-o à lista de módulos) te dará acesso aos
 keycodes abaixo:

 ```python
-from kmk.modules.holdtap import HoldTap
-keyboard.modules.append(HoldTap())
+from kmk.modules.modtap import ModTap
+keyboard.modules.append(ModTap())
 ```

 ## Keycodes

 | Novo Keycode                                           | Descrição                                                       |
 |--------------------------------------------------------|-----------------------------------------------------------------|
-| LCTL = KC.HT(KC.SOMETHING, KC.LCTRL)                   | `LCTRL` se segurado `kc` se tocado                              |
-| LSFT = KC.HT(KC.SOMETHING, KC.LSFT)                    | `LSHIFT` se segurado `kc` se tocado                             |
-| LALT = KC.HT(KC.SOMETHING, KC.LALT)                    | `LALT` se segurado `kc` se tocado                               |
-| LGUI = KC.HT(KC.SOMETHING, KC.LGUI)                    | `LGUI` se segurado `kc` se tocado                               |
-| RCTL = KC.HT(KC.SOMETHING, KC.RCTRL)                   | `RCTRL` se segurado `kc` se tocado                              |
-| RSFT = KC.HT(KC.SOMETHING, KC.RSFT)                    | `RSHIFT` se segurado `kc` se tocado                             |
-| RALT = KC.HT(KC.SOMETHING, KC.RALT)                    | `RALT` se segurado `kc` se tocado                               |
-| RGUI = KC.HT(KC.SOMETHING, KC.RGUI)                    | `RGUI` se segurado `kc` se tocado                               |
-| SGUI = KC.HT(KC.SOMETHING, KC.LSHFT(KC.LGUI))          | `LSHIFT` e `LGUI` se segurado `kc` se tocado                    |
-| LCA = KC.HT(KC.SOMETHING, KC.LCTRL(KC.LALT))           | `LCTRL` e `LALT` se segurado `kc` se tocado                     |
-| LCAG = KC.HT(KC.SOMETHING, KC.LCTRL(KC.LALT(KC.LGUI))) | `LCTRL` e `LALT` e `LGUI` se segurado `kc` se tocado            |
-| MEH = KC.HT(KC.SOMETHING, KC.LCTRL(KC.LSFT(KC.LALT)))  | `CTRL` e `LSHIFT` e `LALT` se segurado `kc` se tocado           |
-| HYPR = KC.HT(KC.SOMETHING, KC.HYPR)                    | `LCTRL` e `LSHIFT` e `LALT` e `LGUI` se segurado `kc` if tapped |
+| LCTL = KC.MT(KC.SOMETHING, KC.LCTRL)                   | `LCTRL` se segurado `kc` se tocado                              |
+| LSFT = KC.MT(KC.SOMETHING, KC.LSFT)                    | `LSHIFT` se segurado `kc` se tocado                             |
+| LALT = KC.MT(KC.SOMETHING, KC.LALT)                    | `LALT` se segurado `kc` se tocado                               |
+| LGUI = KC.MT(KC.SOMETHING, KC.LGUI)                    | `LGUI` se segurado `kc` se tocado                               |
+| RCTL = KC.MT(KC.SOMETHING, KC.RCTRL)                   | `RCTRL` se segurado `kc` se tocado                              |
+| RSFT = KC.MT(KC.SOMETHING, KC.RSFT)                    | `RSHIFT` se segurado `kc` se tocado                             |
+| RALT = KC.MT(KC.SOMETHING, KC.RALT)                    | `RALT` se segurado `kc` se tocado                               |
+| RGUI = KC.MT(KC.SOMETHING, KC.RGUI)                    | `RGUI` se segurado `kc` se tocado                               |
+| SGUI = KC.MT(KC.SOMETHING, KC.LSHFT(KC.LGUI))          | `LSHIFT` e `LGUI` se segurado `kc` se tocado                    |
+| LCA = KC.MT(KC.SOMETHING, KC.LCTRL(KC.LALT))           | `LCTRL` e `LALT` se segurado `kc` se tocado                     |
+| LCAG = KC.MT(KC.SOMETHING, KC.LCTRL(KC.LALT(KC.LGUI))) | `LCTRL` e `LALT` e `LGUI` se segurado `kc` se tocado            |
+| MEH = KC.MT(KC.SOMETHING, KC.LCTRL(KC.LSFT(KC.LALT)))  | `CTRL` e `LSHIFT` e `LALT` se segurado `kc` se tocado           |
+| HYPR = KC.MT(KC.SOMETHING, KC.HYPR)                    | `LCTRL` e `LSHIFT` e `LALT` e `LGUI` se segurado `kc` if tapped |
--- a/docs/ptBR/modules.md
+++ b/docs/ptBR/modules.md
@@ -12,7 +12,7 @@ módulos oferecidos correntemente são;

 - [Layers](layers.md): Acrescenta suporte a camadas (Tecla Fn) para permitir
 colocar bem mais teclas no seu teclado.
- [HoldTap](holdtap.md): Acrescenta suporte para teclas modificadoras que agem
+- [ModTap](modtap.md): Acrescenta suporte para teclas modificadoras que agem
 como teclas comuns ao serem tocadas, mas como modificadores quando seguradas.
 - [Power](power.md): Economia de energia. Este é mais útil quando usando baterias.
 - [Split](split_keyboards.md): Teclados repartidos em dois. Tão ergonômicos!
--- a/docs/ptBR/support.md
+++ b/docs/ptBR/support.md
@@ -1,7 +1,10 @@
 # Suporte

 Se você precisa de suporte com o KMK ou quer somente dizer oi, encontre-nos no
-canal [no Zulip](https://kmkfw.zulipchat.com).
+canal [#kmkfw:klar.sh no Matrix](https://matrix.to/#/#kmkfw:klar.sh). Este canal
+tem uma ponte no Discord
+[aqui](https://discordapp.com/widget?id=493256121075761173&theme=dark) por
+conveniência.

 Se você precisa de ajuda ou pretende abrir um bug report, se
 possível se possível, verifique se sua cópia do KMK está atualizada.
--- a/kmk/bootcfg.py
+++ b/kmk/bootcfg.py
@@ -1,60 +0,0 @@
-import digitalio
-import microcontroller
-
-
-def bootcfg(
-    sense,
-    source=None,
-    no_cdc=True,
-    no_hid=False,
-    no_midi=True,
-    no_storage=True,
-    usb_id=None,
-):
-
-    if isinstance(sense, microcontroller.Pin):
-        sense = digitalio.DigitalInOut(sense)
-        sense.direction = digitalio.Direction.INPUT
-        sense.pull = digitalio.Pull.UP
-
-        if isinstance(source, microcontroller.Pin):
-            source = digitalio.DigitalInOut(source)
-            source.direction = digitalio.Direction.OUTPUT
-            source.value = False
-    else:
-        return False
-
-    # sense pulled low -> skip boot configuration
-    if not sense.value:
-        return False
-
-    if no_cdc:
-        import usb_cdc
-
-        usb_cdc.disable()
-
-    if no_hid:
-        import usb_hid
-
-        usb_hid.disable()
-
-    if no_midi:
-        import usb_midi
-
-        usb_midi.disable()
-
-    if isinstance(usb_id, tuple):
-        import supervisor
-
-        if hasattr(supervisor, 'set_usb_identification'):
-            supervisor.set_usb_identification(*usb_id)
-
-    # The no_storage entry is intentionally evaluated last to ensure the drive
-    # is mountable and rescueable, in case any of the previous code throws an
-    # exception.
-    if no_storage:
-        import storage
-
-        storage.disable_usb_drive()
-
-    return True
--- a/kmk/extensions/rgb.py
+++ b/kmk/extensions/rgb.py
@@ -59,7 +59,7 @@ def hsv_to_rgb(hue, sat, val):
    return (r >> 8), (g >> 8), (b >> 8)


-def hsv_to_rgbw(hue, sat, val):
+def hsv_to_rgbw(self, hue, sat, val):
    '''
    Converts HSV values, and returns a tuple of RGBW values
    :param hue:
--- a/kmk/handlers/stock.py
+++ b/kmk/handlers/stock.py
@@ -127,13 +127,3 @@ def ble_refresh(key, keyboard, *args, **kwargs):
    keyboard._hid_helper.stop_advertising()
    keyboard._hid_helper.start_advertising()
    return keyboard
-
-
-def ble_disconnect(key, keyboard, *args, **kwargs):
-    from kmk.hid import HIDModes
-
-    if keyboard.hid_type != HIDModes.BLE:
-        return keyboard
-
-    keyboard._hid_helper.clear_bonds()
-    return keyboard
--- a/kmk/hid.py
+++ b/kmk/hid.py
@@ -4,8 +4,7 @@ from micropython import const

 from storage import getmount

-from kmk.keys import FIRST_KMK_INTERNAL_KEY, ConsumerKey, ModifierKey, MouseKey
-from kmk.utils import clamp
+from kmk.keys import FIRST_KMK_INTERNAL_KEY, ConsumerKey, ModifierKey

 try:
    from adafruit_ble import BLERadio
@@ -69,14 +68,6 @@ class AbstractHID:
        self.report_mods = memoryview(self._evt)[1:2]
        self.report_non_mods = memoryview(self._evt)[3:]

-        self._cc_report = bytearray(HID_REPORT_SIZES[HIDReportTypes.CONSUMER] + 1)
-        self._cc_report[0] = HIDReportTypes.CONSUMER
-        self._cc_pending = False
-
-        self._pd_report = bytearray(HID_REPORT_SIZES[HIDReportTypes.MOUSE] + 1)
-        self._pd_report[0] = HIDReportTypes.MOUSE
-        self._pd_pending = False
-
        self.post_init()

    def __repr__(self):
@@ -85,27 +76,47 @@ class AbstractHID:
    def post_init(self):
        pass

-    def create_report(self, keys_pressed, axes):
+    def create_report(self, keys_pressed):
        self.clear_all()

+        consumer_key = None
        for key in keys_pressed:
-            if key.code >= FIRST_KMK_INTERNAL_KEY:
-                continue
+            if isinstance(key, ConsumerKey):
+                consumer_key = key
+                break

-            if isinstance(key, ModifierKey):
-                self.add_modifier(key)
-            elif isinstance(key, ConsumerKey):
-                self.add_cc(key)
-            elif isinstance(key, MouseKey):
-                self.add_pd(key)
-            else:
-                self.add_key(key)
-                if key.has_modifiers:
-                    for mod in key.has_modifiers:
-                        self.add_modifier(mod)
+        reporting_device = self.report_device[0]
+        needed_reporting_device = HIDReportTypes.KEYBOARD

-        for axis in axes:
-            self.move_axis(axis)
+        if consumer_key:
+            needed_reporting_device = HIDReportTypes.CONSUMER
+
+        if reporting_device != needed_reporting_device:
+            # If we are about to change reporting devices, release
+            # all keys and close our proverbial tab on the existing
+            # device, or keys will get stuck (mostly when releasing
+            # media/consumer keys)
+            self.send()
+
+        self.report_device[0] = needed_reporting_device
+
+        if consumer_key:
+            self.add_key(consumer_key)
+        else:
+            for key in keys_pressed:
+                if key.code >= FIRST_KMK_INTERNAL_KEY:
+                    continue
+
+                if isinstance(key, ModifierKey):
+                    self.add_modifier(key)
+                else:
+                    self.add_key(key)
+
+                    if key.has_modifiers:
+                        for mod in key.has_modifiers:
+                            self.add_modifier(mod)
+
+        return self

    def hid_send(self, evt):
        # Don't raise a NotImplementedError so this can serve as our "dummy" HID
@@ -120,24 +131,12 @@ class AbstractHID:
            self._prev_evt[:] = self._evt
            self.hid_send(self._evt)

-        if self._cc_pending:
-            self.hid_send(self._cc_report)
-            self._cc_pending = False
-
-        if self._pd_pending:
-            self.hid_send(self._pd_report)
-            self._pd_pending = False
-
        return self

    def clear_all(self):
        for idx, _ in enumerate(self.report_keys):
            self.report_keys[idx] = 0x00

-        self.remove_cc()
-        self.remove_pd()
-        self.clear_axis()
-
        return self

    def clear_non_modifiers(self):
@@ -176,6 +175,9 @@ class AbstractHID:

        where_to_place = self.report_non_mods

+        if self.report_device[0] == HIDReportTypes.CONSUMER:
+            where_to_place = self.report_keys
+
        for idx, _ in enumerate(where_to_place):
            if where_to_place[idx] == 0x00:
                where_to_place[idx] = key.code
@@ -191,44 +193,15 @@ class AbstractHID:
    def remove_key(self, key):
        where_to_place = self.report_non_mods

+        if self.report_device[0] == HIDReportTypes.CONSUMER:
+            where_to_place = self.report_keys
+
        for idx, _ in enumerate(where_to_place):
            if where_to_place[idx] == key.code:
                where_to_place[idx] = 0x00

        return self

-    def add_cc(self, cc):
-        # Add (or write over) consumer control report. There can only be one CC
-        # active at any time.
-        memoryview(self._cc_report)[1:3] = cc.code.to_bytes(2, 'little')
-        self._cc_pending = True
-
-    def remove_cc(self):
-        # Remove consumer control report.
-        report = memoryview(self._cc_report)[1:3]
-        if report != b'\x00\x00':
-            report[:] = b'\x00\x00'
-            self._cc_pending = True
-
-    def add_pd(self, key):
-        self._pd_report[1] |= key.code
-        self._pd_pending = True
-
-    def remove_pd(self):
-        if self._pd_report[1]:
-            self._pd_pending = True
-            self._pd_report[1] = 0x00
-
-    def move_axis(self, axis):
-        delta = clamp(axis.delta, -127, 127)
-        axis.delta -= delta
-        self._pd_report[axis.code + 2] = 0xFF & delta
-        self._pd_pending = True
-
-    def clear_axis(self):
-        for idx in range(2, len(self._pd_report)):
-            self._pd_report[idx] = 0x00
-

 class USBHID(AbstractHID):
    REPORT_BYTES = 9
--- a/kmk/keys.py
+++ b/kmk/keys.py
@@ -20,7 +20,6 @@ class KeyType:
    SIMPLE = const(0)
    MODIFIER = const(1)
    CONSUMER = const(2)
-    MOUSE = const(3)


 FIRST_KMK_INTERNAL_KEY = const(1000)
@@ -34,29 +33,6 @@ ALL_NUMBER_ALIASES = tuple(f'N{x}' for x in ALL_NUMBERS)
 debug = Debug(__name__)


-class Axis:
-    def __init__(self, code: int) -> None:
-        self.code = code
-        self.delta = 0
-
-    def __repr__(self) -> str:
-        return f'Axis(code={self.code}, delta={self.delta})'
-
-    def move(self, keyboard: Keyboard, delta: int):
-        self.delta += delta
-        if self.delta:
-            keyboard.axes.add(self)
-            keyboard.hid_pending = True
-        else:
-            keyboard.axes.discard(self)
-
-
-class AX:
-    W = Axis(2)
-    X = Axis(0)
-    Y = Axis(1)
-
-
 def maybe_make_key(
    code: Optional[int],
    names: Tuple[str, ...],
@@ -364,7 +340,6 @@ def maybe_make_unicode_key(candidate: str) -> Optional[Key]:
 def maybe_make_firmware_key(candidate: str) -> Optional[Key]:
    keys = (
        ((('BLE_REFRESH',), handlers.ble_refresh)),
-        ((('BLE_DISCONNECT',), handlers.ble_disconnect)),
        ((('BOOTLOADER',), handlers.bootloader)),
        ((('DEBUG', 'DBG'), handlers.debug_pressed)),
        ((('HID_SWITCH', 'HID'), handlers.hid_switch)),
@@ -425,62 +400,43 @@ KEY_GENERATORS = (


 class KeyAttrDict:
-    # Instead of relying on the uncontrollable availability of a big chunk of
-    # contiguous memory for key caching, we can manually fragment the cache into
-    # reasonably small partitions. The partition size is chosen from the magic
-    # values of CPs hash allocation sizes.
-    # (https://github.com/adafruit/circuitpython/blob/main/py/map.c, 2023-02)
-    __partition_size = 37
-    __cache = [{}]
+    __cache = {}

    def __iter__(self):
-        for partition in self.__cache:
-            for name in partition:
-                yield name
+        return self.__cache.__iter__()

-    def __setitem__(self, name: str, key: Key):
-        # Overwrite existing reference.
-        for partition in self.__cache:
-            if name in partition:
-                partition[name] = key
-                return key
+    def __setitem__(self, key: str, value: Key):
+        self.__cache.__setitem__(key, value)

-        # Insert new reference.
-        if len(self.__cache[-1]) >= self.__partition_size:
-            self.__cache.append({})
-        self.__cache[-1][name] = key
-        return key
+    def __getattr__(self, key: Key):
+        return self.__getitem__(key)

-    def __getattr__(self, name: str):
-        return self.__getitem__(name)
-
-    def get(self, name: str, default: Optional[Key] = None):
+    def get(self, key: Key, default: Optional[Key] = None):
        try:
-            return self.__getitem__(name)
+            return self.__getitem__(key)
        except Exception:
            return default

    def clear(self):
        self.__cache.clear()
-        self.__cache.append({})

-    def __getitem__(self, name: str):
-        for partition in self.__cache:
-            if name in partition:
-                return partition[name]
+    def __getitem__(self, key: Key):
+        try:
+            return self.__cache[key]
+        except KeyError:
+            pass

        for func in KEY_GENERATORS:
-            maybe_key = func(name)
+            maybe_key = func(key)
            if maybe_key:
                break
-
-        if not maybe_key:
-            raise ValueError(f'Invalid key: {name}')
+        else:
+            raise ValueError(f'Invalid key: {key}')

        if debug.enabled:
-            debug(f'{name}: {maybe_key}')
+            debug(f'{key}: {maybe_key}')

-        return maybe_key
+        return self.__cache[key]


 # Global state, will be filled in throughout this file, and
@@ -713,10 +669,6 @@ class ConsumerKey(Key):
    pass


-class MouseKey(Key):
-    pass
-
-
 def make_key(
    code: Optional[int] = None,
    names: Tuple[str, ...] = tuple(),  # NOQA
@@ -747,8 +699,6 @@ def make_key(
        constructor = ModifierKey
    elif type == KeyType.CONSUMER:
        constructor = ConsumerKey
-    elif type == KeyType.MOUSE:
-        constructor = MouseKey
    else:
        raise ValueError('Unrecognized key type')

@@ -781,10 +731,6 @@ def make_consumer_key(*args, **kwargs) -> Key:
    return make_key(*args, **kwargs, type=KeyType.CONSUMER)


-def make_mouse_key(*args, **kwargs) -> Key:
-    return make_key(*args, **kwargs, type=KeyType.MOUSE)
-
-
 # Argumented keys are implicitly internal, so auto-gen of code
 # is almost certainly the best plan here
 def make_argumented_key(
--- a/kmk/kmk_keyboard.py
+++ b/kmk/kmk_keyboard.py
@@ -49,7 +49,6 @@ class KMKKeyboard:
    #####
    # Internal State
    keys_pressed = set()
-    axes = set()
    _coordkeys_pressed = {}
    hid_type = HIDModes.USB
    secondary_hid_type = None
@@ -89,7 +88,6 @@ class KMKKeyboard:
                f'  unicode_mode={self.unicode_mode}, ',
                f'_hid_helper={self._hid_helper},\n',
                f'  keys_pressed={self.keys_pressed},\n',
-                f'  axes={self.axes},\n',
                f'  _coordkeys_pressed={self._coordkeys_pressed},\n',
                f'  hid_pending={self.hid_pending}, ',
                f'active_layers={self.active_layers}, ',
@@ -104,24 +102,15 @@ class KMKKeyboard:
            debug(f'keys_pressed={self.keys_pressed}')

    def _send_hid(self) -> None:
-        if not self._hid_send_enabled:
-            return
-
-        if self.axes and debug.enabled:
-            debug(f'axes={self.axes}')
-
-        self._hid_helper.create_report(self.keys_pressed, self.axes)
-        try:
-            self._hid_helper.send()
-        except KeyError as e:
-            if debug.enabled:
-                debug(f'HidNotFound(HIDReportType={e})')
-
+        if self._hid_send_enabled:
+            hid_report = self._hid_helper.create_report(self.keys_pressed)
+            try:
+                hid_report.send()
+            except KeyError as e:
+                if debug.enabled:
+                    debug(f'HidNotFound(HIDReportType={e})')
        self.hid_pending = False

-        for axis in self.axes:
-            axis.move(self, 0)
-
    def _handle_matrix_report(self, kevent: KeyEvent) -> None:
        if kevent is not None:
            self._on_matrix_changed(kevent)
@@ -386,10 +375,6 @@ class KMKKeyboard:
        self._hid_helper = self._hid_helper(**self._go_args)
        self._hid_send_enabled = True

-    def _deinit_hid(self) -> None:
-        self._hid_helper.clear_all()
-        self._hid_helper.send()
-
    def _init_matrix(self) -> None:
        if self.matrix is None:
            if debug.enabled:
@@ -502,12 +487,8 @@ class KMKKeyboard:

    def go(self, hid_type=HIDModes.USB, secondary_hid_type=None, **kwargs) -> None:
        self._init(hid_type=hid_type, secondary_hid_type=secondary_hid_type, **kwargs)
-        try:
-            while True:
-                self._main_loop()
-        finally:
-            debug('Unexpected error: cleaning up')
-            self._deinit_hid()
+        while True:
+            self._main_loop()

    def _init(
        self,
--- a/kmk/modules/adns9800.py
+++ b/kmk/modules/adns9800.py
@@ -4,9 +4,9 @@ import microcontroller

 import time

-from kmk.keys import AX
 from kmk.modules import Module
 from kmk.modules.adns9800_firmware import firmware
+from kmk.modules.mouse_keys import PointingDevice


 class REG:
@@ -70,6 +70,7 @@ class ADNS9800(Module):
    DIR_READ = 0x7F

    def __init__(self, cs, sclk, miso, mosi, invert_x=False, invert_y=False):
+        self.pointing_device = PointingDevice()
        self.cs = digitalio.DigitalInOut(cs)
        self.cs.direction = digitalio.Direction.OUTPUT
        self.spi = busio.SPI(clock=sclk, MOSI=mosi, MISO=miso)
@@ -202,14 +203,27 @@ class ADNS9800(Module):
            if self.invert_y:
                delta_y *= -1

-            if delta_x:
-                AX.X.move(delta_x)
+            if delta_x < 0:
+                self.pointing_device.report_x[0] = (delta_x & 0xFF) | 0x80
+            else:
+                self.pointing_device.report_x[0] = delta_x & 0xFF

-            if delta_y:
-                AX.Y.move(delta_y)
+            if delta_y < 0:
+                self.pointing_device.report_y[0] = (delta_y & 0xFF) | 0x80
+            else:
+                self.pointing_device.report_y[0] = delta_y & 0xFF

            if keyboard.debug_enabled:
                print('Delta: ', delta_x, ' ', delta_y)
+            self.pointing_device.hid_pending = True
+
+        if self.pointing_device.hid_pending:
+            keyboard._hid_helper.hid_send(self.pointing_device._evt)
+            self.pointing_device.hid_pending = False
+            self.pointing_device.report_x[0] = 0
+            self.pointing_device.report_y[0] = 0
+
+        return

    def after_matrix_scan(self, keyboard):
        return
--- a/kmk/modules/easypoint.py
+++ b/kmk/modules/easypoint.py
@@ -4,8 +4,8 @@ Extension handles usage of AS5013 by AMS

 from supervisor import ticks_ms

-from kmk.keys import AX
 from kmk.modules import Module
+from kmk.modules.mouse_keys import PointingDevice

 I2C_ADDRESS = 0x40
 I2X_ALT_ADDRESS = 0x41
@@ -44,6 +44,7 @@ class Easypoint(Module):
        self._i2c_bus = i2c

        # HID parameters
+        self.pointing_device = PointingDevice()
        self.polling_interval = 20
        self.last_tick = ticks_ms()

@@ -81,8 +82,12 @@ class Easypoint(Module):
            return
        else:
            # Set the X/Y from easypoint
-            AX.X.move(keyboard, x)
-            AX.Y.move(keyboard, y)
+            self.pointing_device.report_x[0] = x
+            self.pointing_device.report_y[0] = y
+
+            self.pointing_device.hid_pending = x != 0 or y != 0
+
+        return

    def after_matrix_scan(self, keyboard):
        return
@@ -91,6 +96,9 @@ class Easypoint(Module):
        return

    def after_hid_send(self, keyboard):
+        if self.pointing_device.hid_pending:
+            keyboard._hid_helper.hid_send(self.pointing_device._evt)
+            self._clear_pending_hid()
        return

    def on_powersave_enable(self, keyboard):
@@ -99,13 +107,20 @@ class Easypoint(Module):
    def on_powersave_disable(self, keyboard):
        return

+    def _clear_pending_hid(self):
+        self.pointing_device.hid_pending = False
+        self.pointing_device.report_x[0] = 0
+        self.pointing_device.report_y[0] = 0
+        self.pointing_device.report_w[0] = 0
+        self.pointing_device.button_status[0] = 0
+
    def _read_raw_state(self):
        '''Read data from AS5013'''
        x, y = self._i2c_rdwr([X], length=2)
        return x, y

    def getSignedNumber(self, number, bitLength=8):
-        mask = (2**bitLength) - 1
+        mask = (2 ** bitLength) - 1
        if number & (1 << (bitLength - 1)):
            return number | ~mask
        else:
--- a/kmk/modules/layers.py
+++ b/kmk/modules/layers.py
@@ -46,9 +46,7 @@ class Layers(HoldTap):
            on_release=self._mo_released,
        )
        make_argumented_key(
-            validator=layer_key_validator,
-            names=('DF',),
-            on_press=self._df_pressed,
+            validator=layer_key_validator, names=('DF',), on_press=self._df_pressed
        )
        make_argumented_key(
            validator=layer_key_validator,
@@ -57,14 +55,10 @@ class Layers(HoldTap):
            on_release=self._lm_released,
        )
        make_argumented_key(
-            validator=layer_key_validator,
-            names=('TG',),
-            on_press=self._tg_pressed,
+            validator=layer_key_validator, names=('TG',), on_press=self._tg_pressed
        )
        make_argumented_key(
-            validator=layer_key_validator,
-            names=('TO',),
-            on_press=self._to_pressed,
+            validator=layer_key_validator, names=('TO',), on_press=self._to_pressed
        )
        make_argumented_key(
            validator=layer_key_validator_lt,
@@ -114,15 +108,17 @@ class Layers(HoldTap):
        '''
        As MO(layer) but with mod active
        '''
+        keyboard.hid_pending = True
        # Sets the timer start and acts like MO otherwise
-        keyboard.add_key(key.meta.kc)
+        keyboard.keys_pressed.add(key.meta.kc)
        self._mo_pressed(key, keyboard, *args, **kwargs)

    def _lm_released(self, key, keyboard, *args, **kwargs):
        '''
        As MO(layer) but with mod active
        '''
-        keyboard.remove_key(key.meta.kc)
+        keyboard.hid_pending = True
+        keyboard.keys_pressed.discard(key.meta.kc)
        self._mo_released(key, keyboard, *args, **kwargs)

    def _tg_pressed(self, key, keyboard, *args, **kwargs):
--- a/kmk/modules/modtap.py
+++ b/kmk/modules/modtap.py
@@ -2,7 +2,6 @@ from kmk.keys import make_argumented_key
 from kmk.modules.holdtap import HoldTap, HoldTapKeyMeta


-# Deprecation Notice: The `ModTap` class serves as an alias for `HoldTap` and will be removed in a future update. Please use `HoldTap` instead.
 class ModTap(HoldTap):
    def __init__(self):
        super().__init__()
--- a/kmk/modules/mouse_keys.py
+++ b/kmk/modules/mouse_keys.py
@@ -1,40 +1,54 @@
-from kmk.keys import AX, make_key, make_mouse_key
-from kmk.kmktime import PeriodicTimer
+from supervisor import ticks_ms
+
+from kmk.hid import HID_REPORT_SIZES, HIDReportTypes
+from kmk.keys import make_key
 from kmk.modules import Module


+class PointingDevice:
+    MB_LMB = 1
+    MB_RMB = 2
+    MB_MMB = 4
+    _evt = bytearray(HID_REPORT_SIZES[HIDReportTypes.MOUSE] + 1)
+
+    def __init__(self):
+        self.key_states = {}
+        self.hid_pending = False
+        self.report_device = memoryview(self._evt)[0:1]
+        self.report_device[0] = HIDReportTypes.MOUSE
+        self.button_status = memoryview(self._evt)[1:2]
+        self.report_x = memoryview(self._evt)[2:3]
+        self.report_y = memoryview(self._evt)[3:4]
+        self.report_w = memoryview(self._evt)[4:]
+
+
 class MouseKeys(Module):
    def __init__(self):
+        self.pointing_device = PointingDevice()
        self._nav_key_activated = 0
        self._up_activated = False
        self._down_activated = False
        self._left_activated = False
        self._right_activated = False
-        self._mw_up_activated = False
-        self._mw_down_activated = False
        self.max_speed = 10
-        self.acc_interval = 10  # Delta ms to apply acceleration
+        self.ac_interval = 100  # Delta ms to apply acceleration
+        self._next_interval = 0  # Time for next tick interval
        self.move_step = 1

-        make_mouse_key(
+        make_key(
            names=('MB_LMB',),
-            code=1,
+            on_press=self._mb_lmb_press,
+            on_release=self._mb_lmb_release,
        )
-        make_mouse_key(
+        make_key(
            names=('MB_MMB',),
-            code=4,
+            on_press=self._mb_mmb_press,
+            on_release=self._mb_mmb_release,
        )
-        make_mouse_key(
+        make_key(
            names=('MB_RMB',),
-            code=2,
-        )
-        make_mouse_key(
-            names=('MB_BTN4',),
-            code=8,
-        )
-        make_mouse_key(
-            names=('MB_BTN5',),
-            code=16,
+            on_press=self._mb_rmb_press,
+            on_release=self._mb_rmb_release,
        )
        make_key(
            names=('MW_UP',),
@@ -80,33 +94,38 @@ class MouseKeys(Module):
        )

    def during_bootup(self, keyboard):
-        self._timer = PeriodicTimer(self.acc_interval)
+        return
+
+    def matrix_detected_press(self, keyboard):
+        return keyboard.matrix_update is None

    def before_matrix_scan(self, keyboard):
        return

    def after_matrix_scan(self, keyboard):
-        if not self._timer.tick():
-            return
-
        if self._nav_key_activated:
-            if self.move_step < self.max_speed:
-                self.move_step = self.move_step + 1
+            if self._next_interval <= ticks_ms():
+                # print("hello: ")
+                # print(ticks_ms())
+                self._next_interval = ticks_ms() + self.ac_interval
+                # print(self._next_interval)
+                if self.move_step < self.max_speed:
+                    self.move_step = self.move_step + 1
            if self._right_activated:
-                AX.X.move(keyboard, self.move_step)
+                self.pointing_device.report_x[0] = self.move_step
            if self._left_activated:
-                AX.X.move(keyboard, -self.move_step)
+                self.pointing_device.report_x[0] = 0xFF & (0 - self.move_step)
            if self._up_activated:
-                AX.Y.move(keyboard, -self.move_step)
+                self.pointing_device.report_y[0] = 0xFF & (0 - self.move_step)
            if self._down_activated:
-                AX.Y.move(keyboard, self.move_step)
-
-        if self._mw_up_activated:
-            AX.W.move(keyboard, 1)
-        if self._mw_down_activated:
-            AX.W.move(keyboard, -1)
+                self.pointing_device.report_y[0] = self.move_step
+            self.pointing_device.hid_pending = True
+        return

    def before_hid_send(self, keyboard):
+        if self.pointing_device.hid_pending and keyboard._hid_send_enabled:
+            keyboard._hid_helper.hid_send(self.pointing_device._evt)
+            self.pointing_device.hid_pending = False
        return

    def after_hid_send(self, keyboard):
@@ -118,21 +137,50 @@ class MouseKeys(Module):
    def on_powersave_disable(self, keyboard):
        return

+    def _mb_lmb_press(self, key, keyboard, *args, **kwargs):
+        self.pointing_device.button_status[0] |= self.pointing_device.MB_LMB
+        self.pointing_device.hid_pending = True
+
+    def _mb_lmb_release(self, key, keyboard, *args, **kwargs):
+        self.pointing_device.button_status[0] &= ~self.pointing_device.MB_LMB
+        self.pointing_device.hid_pending = True
+
+    def _mb_mmb_press(self, key, keyboard, *args, **kwargs):
+        self.pointing_device.button_status[0] |= self.pointing_device.MB_MMB
+        self.pointing_device.hid_pending = True
+
+    def _mb_mmb_release(self, key, keyboard, *args, **kwargs):
+        self.pointing_device.button_status[0] &= ~self.pointing_device.MB_MMB
+        self.pointing_device.hid_pending = True
+
+    def _mb_rmb_press(self, key, keyboard, *args, **kwargs):
+        self.pointing_device.button_status[0] |= self.pointing_device.MB_RMB
+        self.pointing_device.hid_pending = True
+
+    def _mb_rmb_release(self, key, keyboard, *args, **kwargs):
+        self.pointing_device.button_status[0] &= ~self.pointing_device.MB_RMB
+        self.pointing_device.hid_pending = True
+
    def _mw_up_press(self, key, keyboard, *args, **kwargs):
-        self._mw_up_activated = True
+        self.pointing_device.report_w[0] = self.move_step
+        self.pointing_device.hid_pending = True

    def _mw_up_release(self, key, keyboard, *args, **kwargs):
-        self._mw_up_activated = False
+        self.pointing_device.report_w[0] = 0
+        self.pointing_device.hid_pending = True

    def _mw_down_press(self, key, keyboard, *args, **kwargs):
-        self._mw_down_activated = True
+        self.pointing_device.report_w[0] = 0xFF
+        self.pointing_device.hid_pending = True

    def _mw_down_release(self, key, keyboard, *args, **kwargs):
-        self._mw_down_activated = False
+        self.pointing_device.report_w[0] = 0
+        self.pointing_device.hid_pending = True

    # Mouse movement
    def _reset_next_interval(self):
        if self._nav_key_activated == 1:
+            self._next_interval = ticks_ms() + self.ac_interval
            self.move_step = 1

    def _check_last(self):
@@ -143,38 +191,56 @@ class MouseKeys(Module):
        self._nav_key_activated += 1
        self._reset_next_interval()
        self._up_activated = True
+        self.pointing_device.report_y[0] = 0xFF & (0 - self.move_step)
+        self.pointing_device.hid_pending = True

    def _ms_up_release(self, key, keyboard, *args, **kwargs):
        self._up_activated = False
        self._nav_key_activated -= 1
        self._check_last()
+        self.pointing_device.report_y[0] = 0
+        self.pointing_device.hid_pending = False

    def _ms_down_press(self, key, keyboard, *args, **kwargs):
        self._nav_key_activated += 1
        self._reset_next_interval()
        self._down_activated = True
+        # if not self.x_activated and not self.y_activated:
+        #     self.next_interval = ticks_ms() + self.ac_intervalle
+        self.pointing_device.report_y[0] = self.move_step
+        self.pointing_device.hid_pending = True

    def _ms_down_release(self, key, keyboard, *args, **kwargs):
        self._down_activated = False
        self._nav_key_activated -= 1
        self._check_last()
+        self.pointing_device.report_y[0] = 0
+        self.pointing_device.hid_pending = False

    def _ms_left_press(self, key, keyboard, *args, **kwargs):
        self._nav_key_activated += 1
        self._reset_next_interval()
        self._left_activated = True
+        self.pointing_device.report_x[0] = 0xFF & (0 - self.move_step)
+        self.pointing_device.hid_pending = True

    def _ms_left_release(self, key, keyboard, *args, **kwargs):
        self._nav_key_activated -= 1
        self._left_activated = False
        self._check_last()
+        self.pointing_device.report_x[0] = 0
+        self.pointing_device.hid_pending = False

    def _ms_right_press(self, key, keyboard, *args, **kwargs):
        self._nav_key_activated += 1
        self._reset_next_interval()
        self._right_activated = True
+        self.pointing_device.report_x[0] = self.move_step
+        self.pointing_device.hid_pending = True

    def _ms_right_release(self, key, keyboard, *args, **kwargs):
        self._nav_key_activated -= 1
        self._right_activated = False
        self._check_last()
+        self.pointing_device.report_x[0] = 0
+        self.pointing_device.hid_pending = False
--- a/kmk/modules/oneshot.py
+++ b/kmk/modules/oneshot.py
@@ -1,14 +1,9 @@
 from kmk.keys import make_argumented_key
 from kmk.modules.holdtap import ActivationType, HoldTap, HoldTapKeyMeta
-from kmk.modules.layers import LayerKeyMeta
-from kmk.utils import Debug
-
-debug = Debug(__name__)


-class OneShotKeyMeta(HoldTapKeyMeta):
-    def __init__(self, kc, tap_time=None):
-        super().__init__(tap=kc, hold=kc, prefer_hold=False, tap_time=tap_time)
+def oneshot_validator(kc, tap_time=None):
+    return HoldTapKeyMeta(tap=kc, hold=kc, prefer_hold=False, tap_time=tap_time)


 class OneShot(HoldTap):
@@ -17,49 +12,30 @@ class OneShot(HoldTap):
    def __init__(self):
        super().__init__()
        make_argumented_key(
-            validator=OneShotKeyMeta,
+            validator=oneshot_validator,
            names=('OS', 'ONESHOT'),
            on_press=self.osk_pressed,
            on_release=self.osk_released,
        )

    def process_key(self, keyboard, current_key, is_pressed, int_coord):
-        '''Release os key after interrupting non-os keyup, or reset timeout and
-        stack multiple os keys.'''
-        send_buffer = False
-
+        '''Release os key after interrupting keyup.'''
        for key, state in self.key_states.items():
            if key == current_key:
                continue

-            if (isinstance(current_key.meta, OneShotKeyMeta)) or (
-                isinstance(current_key.meta, LayerKeyMeta)
-            ):
-                keyboard.cancel_timeout(state.timeout_key)
-                if key.meta.tap_time is None:
-                    tap_time = self.tap_time
-                else:
-                    tap_time = key.meta.tap_time
-                state.timeout_key = keyboard.set_timeout(
-                    tap_time,
-                    lambda k=key: self.on_tap_time_expired(k, keyboard),
-                )
-                continue
-
            if state.activated == ActivationType.PRESSED and is_pressed:
                state.activated = ActivationType.HOLD_TIMEOUT
            elif state.activated == ActivationType.RELEASED and is_pressed:
                state.activated = ActivationType.INTERRUPTED
            elif state.activated == ActivationType.INTERRUPTED:
                if is_pressed:
-                    send_buffer = True
-                self.key_buffer.insert(0, (0, key, False))
-
-        if send_buffer:
-            self.key_buffer.append((int_coord, current_key, is_pressed))
-            current_key = None
-
-        self.send_key_buffer(keyboard)
+                    keyboard.remove_key(key.meta.tap)
+                    self.key_buffer.append((int_coord, current_key, is_pressed))
+                    keyboard.set_timeout(False, lambda: self.send_key_buffer(keyboard))
+                    current_key = None
+                else:
+                    self.ht_released(key, keyboard)

        return current_key

@@ -75,8 +51,8 @@ class OneShot(HoldTap):
        try:
            state = self.key_states[key]
        except KeyError:
-            if debug.enabled:
-                debug(f'OneShot.osk_released: no such key {key}')
+            if keyboard.debug_enabled:
+                print(f'OneShot.osk_released: no such key {key}')
            return keyboard

        if state.activated == ActivationType.PRESSED:
--- a/kmk/modules/pimoroni_trackball.py
+++ b/kmk/modules/pimoroni_trackball.py
@@ -7,9 +7,10 @@ from micropython import const
 import math
 import struct

-from kmk.keys import AX, KC, make_argumented_key, make_key
+from kmk.keys import make_argumented_key, make_key
 from kmk.kmktime import PeriodicTimer
 from kmk.modules import Module
+from kmk.modules.mouse_keys import PointingDevice

 I2C_ADDRESS = 0x0A
 I2C_ADDRESS_ALTERNATIVE = 0x0B
@@ -77,16 +78,29 @@ class TrackballHandler:

 class PointingHandler(TrackballHandler):
    def handle(self, keyboard, trackball, x, y, switch, state):
-        if x:
-            AX.X.move(keyboard, x)
-        if y:
-            AX.Y.move(keyboard, y)
+        if x > 0:
+            trackball.pointing_device.report_x[0] = x
+        elif x < 0:
+            trackball.pointing_device.report_x[0] = 0xFF & x
+        if y > 0:
+            trackball.pointing_device.report_y[0] = y
+        elif y < 0:
+            trackball.pointing_device.report_y[0] = 0xFF & y
+
+        if x != 0 or y != 0:
+            trackball.pointing_device.hid_pending = True

        if switch == 1:  # Button pressed
-            keyboard.pre_process_key(KC.MB_LMB, is_pressed=True)
+            trackball.pointing_device.button_status[
+                0
+            ] |= trackball.pointing_device.MB_LMB
+            trackball.pointing_device.hid_pending = True

        if not state and trackball.previous_state is True:  # Button released
-            keyboard.pre_process_key(KC.MB_LMB, is_pressed=False)
+            trackball.pointing_device.button_status[
+                0
+            ] &= ~trackball.pointing_device.MB_LMB
+            trackball.pointing_device.hid_pending = True

        trackball.previous_state = state

@@ -100,13 +114,17 @@ class ScrollHandler(TrackballHandler):
            y = -y

        if y != 0:
-            AX.W.move(keyboard, y)
+            pointing_device = trackball.pointing_device
+            pointing_device.report_w[0] = 0xFF & y
+            pointing_device.hid_pending = True

        if switch == 1:  # Button pressed
-            keyboard.pre_process_key(KC.MB_LMB, is_pressed=True)
+            pointing_device.button_status[0] |= pointing_device.MB_LMB
+            pointing_device.hid_pending = True

        if not state and trackball.previous_state is True:  # Button released
-            keyboard.pre_process_key(KC.MB_LMB, is_pressed=False)
+            pointing_device.button_status[0] &= ~pointing_device.MB_LMB
+            pointing_device.hid_pending = True

        trackball.previous_state = state

@@ -167,6 +185,7 @@ class Trackball(Module):
        self._i2c_address = address
        self._i2c_bus = i2c

+        self.pointing_device = PointingDevice()
        self.mode = mode
        self.previous_state = False  # click state
        self.handlers = handlers
@@ -215,6 +234,9 @@ class Trackball(Module):
        return

    def after_hid_send(self, keyboard):
+        if self.pointing_device.hid_pending:
+            keyboard._hid_helper.hid_send(self.pointing_device._evt)
+            self._clear_pending_hid()
        return

    def on_powersave_enable(self, keyboard):
@@ -258,6 +280,13 @@ class Trackball(Module):
            next_index = 0
        self.activate_handler(next_index)

+    def _clear_pending_hid(self):
+        self.pointing_device.hid_pending = False
+        self.pointing_device.report_x[0] = 0
+        self.pointing_device.report_y[0] = 0
+        self.pointing_device.report_w[0] = 0
+        self.pointing_device.button_status[0] = 0
+
    def _read_raw_state(self):
        '''Read up, down, left, right and switch data from trackball.'''
        left, right, up, down, switch = self._i2c_rdwr([REG_LEFT], 5)
--- a/kmk/modules/power.py
+++ b/kmk/modules/power.py
@@ -103,9 +103,9 @@ class Power(Module):
        '''
        Sleeps longer and longer to save power the more time in between updates.
        '''
-        if check_deadline(ticks_ms(), self._powersave_start, 60000):
+        if check_deadline(ticks_ms(), self._powersave_start) <= 60000:
            sleep(8 / 1000)
-        elif check_deadline(ticks_ms(), self._powersave_start, 240000) is False:
+        elif check_deadline(ticks_ms(), self._powersave_start) >= 240000:
            sleep(180 / 1000)
        return

@@ -123,7 +123,7 @@ class Power(Module):
        return

    def usb_rescan_timer(self):
-        return bool(check_deadline(ticks_ms(), self._usb_last_scan, 5000) is False)
+        return bool(check_deadline(ticks_ms(), self._usb_last_scan) > 5000)

    def usb_time_reset(self):
        self._usb_last_scan = ticks_ms()
--- a/setup.cfg
+++ b/setup.cfg
@@ -23,7 +23,6 @@ per-file-ignores =
 # your imports in whatever order you want
 	user_keymaps/**/*.py: E131,F401,E501,E241,E131,BLK100,I003
 	boards/**/main.py: E131,F401,E501,E241,E131,BLK100,I003
-	boards/**/kb.py: E131,F401,E501,E241,E131,BLK100,I003
 	tests/test_data/keymaps/**/*.py: F401,E501

 [isort]
--- a/tests/keyboard_test.py
+++ b/tests/keyboard_test.py
@@ -74,14 +74,7 @@ class KeyboardTest:
                is_pressed = e[1]
                self.pins[key_pos].value = is_pressed
                self.do_main_loop()
-
-        # wait up to 10s for delayed actions to resolve, if there are any
-        timeout = time.time_ns() + 10 * 1_000_000_000
-        while timeout > time.time_ns():
-            self.do_main_loop()
-            if not self.keyboard._timeouts and not self.keyboard._resume_buffer:
-                break
-        assert timeout > time.time_ns(), 'infinite loop detected'
+        self.keyboard._main_loop()

        matching = True
        for i in range(max(len(hid_reports), len(assert_reports))):
--- a/tests/test_hold_tap.py
+++ b/tests/test_hold_tap.py
@@ -1,66 +1,65 @@
 import unittest

 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap, HoldTapRepeat
+from kmk.modules.holdtap import HoldTapRepeat
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
+from kmk.modules.oneshot import OneShot
 from tests.keyboard_test import KeyboardTest


 class TestHoldTap(unittest.TestCase):
-    def setUp(self):
-        KC.clear()
-
    def test_holdtap(self):
        keyboard = KeyboardTest(
-            [Layers(), HoldTap()],
+            [Layers(), ModTap(), OneShot()],
            [
-                [KC.HT(KC.A, KC.LCTL), KC.LT(1, KC.B), KC.C, KC.D],
-                [KC.N1, KC.N2, KC.N3, KC.N4],
+                [KC.MT(KC.A, KC.LCTL), KC.LT(1, KC.B), KC.C, KC.D, KC.OS(KC.E)],
+                [KC.N1, KC.N2, KC.N3, KC.N4, KC.N5],
            ],
            debug_enabled=False,
        )

-        keyboard.test('HT tap behaviour', [(0, True), 100, (0, False)], [{KC.A}, {}])
+        keyboard.test('MT tap behaviour', [(0, True), 100, (0, False)], [{KC.A}, {}])

        keyboard.test(
-            'HT hold behaviour', [(0, True), 350, (0, False)], [{KC.LCTL}, {}]
+            'MT hold behaviour', [(0, True), 350, (0, False)], [{KC.LCTL}, {}]
        )

        # TODO test multiple mods being held

-        # HT
+        # MT
        keyboard.test(
-            'HT within tap time sequential -> tap behavior',
+            'MT within tap time sequential -> tap behavior',
            [(0, True), 100, (0, False), (3, True), (3, False)],
            [{KC.A}, {}, {KC.D}, {}],
        )

        keyboard.test(
-            'HT within tap time rolling -> hold behavior',
+            'MT within tap time rolling -> hold behavior',
            [(0, True), 100, (3, True), 250, (0, False), (3, False)],
            [{KC.LCTL}, {KC.LCTL, KC.D}, {KC.D}, {}],
        )

        keyboard.test(
-            'HT within tap time nested -> hold behavior',
+            'MT within tap time nested -> hold behavior',
            [(0, True), 100, (3, True), (3, False), 250, (0, False)],
            [{KC.LCTL}, {KC.LCTL, KC.D}, {KC.LCTL}, {}],
        )

        keyboard.test(
-            'HT after tap time sequential -> hold behavior',
+            'MT after tap time sequential -> hold behavior',
            [(0, True), 350, (0, False), (3, True), (3, False)],
            [{KC.LCTL}, {}, {KC.D}, {}],
        )

        keyboard.test(
-            'HT after tap time rolling -> hold behavior',
+            'MT after tap time rolling -> hold behavior',
            [(0, True), 350, (3, True), (0, False), (3, False)],
            [{KC.LCTL}, {KC.LCTL, KC.D}, {KC.D}, {}],
        )

        keyboard.test(
-            'HT after tap time nested -> hold behavior',
+            'MT after tap time nested -> hold behavior',
            [(0, True), 350, (3, True), (3, False), (0, False)],
            [{KC.LCTL}, {KC.LCTL, KC.D}, {KC.LCTL}, {}],
        )
@@ -119,13 +118,13 @@ class TestHoldTap(unittest.TestCase):

    def test_holdtap_chain(self):
        keyboard = KeyboardTest(
-            [HoldTap()],
+            [ModTap()],
            [
                [
                    KC.N0,
-                    KC.HT(KC.N1, KC.LCTL, tap_time=50),
-                    KC.HT(KC.N2, KC.LSFT, tap_interrupted=True, tap_time=50),
-                    KC.HT(
+                    KC.MT(KC.N1, KC.LCTL, tap_time=50),
+                    KC.MT(KC.N2, KC.LSFT, tap_interrupted=True, tap_time=50),
+                    KC.MT(
                        KC.N3,
                        KC.LALT,
                        prefer_hold=False,
@@ -276,12 +275,12 @@ class TestHoldTap(unittest.TestCase):

    def test_holdtap_repeat(self):
        keyboard = KeyboardTest(
-            [HoldTap()],
+            [ModTap()],
            [
                [
-                    KC.HT(KC.A, KC.B, repeat=HoldTapRepeat.ALL, tap_time=50),
-                    KC.HT(KC.A, KC.B, repeat=HoldTapRepeat.TAP, tap_time=50),
-                    KC.HT(KC.A, KC.B, repeat=HoldTapRepeat.HOLD, tap_time=50),
+                    KC.MT(KC.A, KC.B, repeat=HoldTapRepeat.ALL, tap_time=50),
+                    KC.MT(KC.A, KC.B, repeat=HoldTapRepeat.TAP, tap_time=50),
+                    KC.MT(KC.A, KC.B, repeat=HoldTapRepeat.HOLD, tap_time=50),
                ]
            ],
            debug_enabled=False,
@@ -350,3 +349,76 @@ class TestHoldTap(unittest.TestCase):
            [(2, True), (2, False), (2, True), t_after, (2, False)],
            [{KC.A}, {}, {KC.B}, {}],
        )
+
+    def test_oneshot(self):
+        keyboard = KeyboardTest(
+            [Layers(), ModTap(), OneShot()],
+            [
+                [
+                    KC.MT(KC.A, KC.LCTL),
+                    KC.LT(1, KC.B),
+                    KC.C,
+                    KC.D,
+                    KC.OS(KC.E, tap_time=50),
+                ],
+                [KC.N1, KC.N2, KC.N3, KC.N4, KC.N5],
+            ],
+            debug_enabled=False,
+        )
+        t_within = 40
+        t_after = 60
+
+        # OS
+        keyboard.test(
+            'OS timed out',
+            [(4, True), (4, False), t_after],
+            [{KC.E}, {}],
+        )
+
+        keyboard.test(
+            'OS interrupt within tap time',
+            [(4, True), (4, False), t_within, (3, True), (3, False)],
+            [{KC.E}, {KC.D, KC.E}, {KC.E}, {}],
+        )
+
+        keyboard.test(
+            'OS interrupt, multiple within tap time',
+            [(4, True), (4, False), (3, True), (3, False), (2, True), (2, False)],
+            [{KC.E}, {KC.D, KC.E}, {KC.E}, {}, {KC.C}, {}],
+        )
+
+        keyboard.test(
+            'OS interrupt, multiple interleaved',
+            [(4, True), (4, False), (3, True), (2, True), (2, False), (3, False)],
+            [{KC.E}, {KC.D, KC.E}, {KC.D}, {KC.C, KC.D}, {KC.D}, {}],
+        )
+
+        keyboard.test(
+            'OS interrupt, multiple interleaved',
+            [(4, True), (4, False), (3, True), (2, True), (3, False), (2, False)],
+            [{KC.E}, {KC.D, KC.E}, {KC.D}, {KC.C, KC.D}, {KC.C}, {}],
+        )
+
+        keyboard.test(
+            'OS interrupt within tap time, hold',
+            [(4, True), (3, True), (4, False), t_after, (3, False)],
+            [{KC.E}, {KC.D, KC.E}, {KC.D}, {}],
+        )
+
+        keyboard.test(
+            'OS hold with multiple interrupt keys',
+            [
+                (4, True),
+                t_within,
+                (3, True),
+                (3, False),
+                (2, True),
+                (2, False),
+                (4, False),
+            ],
+            [{KC.E}, {KC.D, KC.E}, {KC.E}, {KC.C, KC.E}, {KC.E}, {}],
+        )
+
+
+if __name__ == '__main__':
+    unittest.main()
--- a/tests/test_oneshot.py
+++ b/tests/test_oneshot.py
@@ -1,147 +0,0 @@
-import unittest
-
-from kmk.keys import KC
-from kmk.modules.layers import Layers
-from kmk.modules.oneshot import OneShot
-from tests.keyboard_test import KeyboardTest
-
-
-class TestHoldTap(unittest.TestCase):
-    def test_oneshot(self):
-        keyboard = KeyboardTest(
-            [Layers(), OneShot()],
-            [
-                [
-                    KC.OS(KC.MO(1), tap_time=50),
-                    KC.MO(1),
-                    KC.C,
-                    KC.D,
-                    KC.OS(KC.E, tap_time=50),
-                    KC.OS(KC.F, tap_time=50),
-                ],
-                [KC.N0, KC.N1, KC.N2, KC.N3, KC.OS(KC.LSFT, tap_time=50), KC.TRNS],
-            ],
-            debug_enabled=False,
-        )
-        t_within = 40
-        t_after = 60
-
-        keyboard.test(
-            'OS timed out',
-            [(4, True), (4, False), t_after],
-            [{KC.E}, {}],
-        )
-
-        keyboard.test(
-            'OS interrupt within tap time',
-            [(4, True), (4, False), t_within, (3, True), (3, False)],
-            [{KC.E}, {KC.D, KC.E}, {KC.E}, {}],
-        )
-
-        keyboard.test(
-            'OS interrupt, multiple within tap time',
-            [(4, True), (4, False), (3, True), (3, False), (2, True), (2, False)],
-            [{KC.E}, {KC.D, KC.E}, {KC.E}, {}, {KC.C}, {}],
-        )
-
-        keyboard.test(
-            'OS interrupt, multiple interleaved',
-            [(4, True), (4, False), (3, True), (2, True), (2, False), (3, False)],
-            [{KC.E}, {KC.D, KC.E}, {KC.D}, {KC.C, KC.D}, {KC.D}, {}],
-        )
-
-        keyboard.test(
-            'OS interrupt, multiple interleaved',
-            [(4, True), (4, False), (3, True), (2, True), (3, False), (2, False)],
-            [{KC.E}, {KC.D, KC.E}, {KC.D}, {KC.C, KC.D}, {KC.C}, {}],
-        )
-
-        keyboard.test(
-            'OS interrupt within tap time, hold',
-            [(4, True), (3, True), (4, False), t_after, (3, False)],
-            [{KC.E}, {KC.D, KC.E}, {KC.D}, {}],
-        )
-
-        keyboard.test(
-            'OS interrupt within tap time, hold',
-            [(4, True), (4, False), (3, True), t_after, (3, False)],
-            [{KC.E}, {KC.D, KC.E}, {KC.E}, {}],
-        )
-
-        keyboard.test(
-            'OS hold with multiple interrupt keys',
-            [
-                (4, True),
-                t_within,
-                (3, True),
-                (3, False),
-                (2, True),
-                (2, False),
-                (4, False),
-            ],
-            [{KC.E}, {KC.D, KC.E}, {KC.E}, {KC.C, KC.E}, {KC.E}, {}],
-        )
-
-        keyboard.test(
-            'OS stacking within timeout reset',
-            [
-                (4, True),
-                (4, False),
-                t_within,
-                (5, True),
-                (5, False),
-                t_within,
-                (3, True),
-                (3, False),
-            ],
-            [{KC.E}, {KC.E, KC.F}, {KC.E, KC.F, KC.D}, {KC.E, KC.F}, {KC.E}, {}],
-        )
-
-        keyboard.test(
-            'OS stacking timed out',
-            [
-                (4, True),
-                (4, False),
-                (5, True),
-                (5, False),
-                t_after,
-                (3, True),
-                (3, False),
-            ],
-            [{KC.E}, {KC.E, KC.F}, {KC.E}, {}, {KC.D}, {}],
-        )
-
-        keyboard.test(
-            'OS stacking with OS-layer',
-            [
-                (0, True),
-                (0, False),
-                (4, True),
-                (4, False),
-                (1, True),
-                (1, False),
-            ],
-            [{KC.LSFT}, {KC.LSFT, KC.N1}, {KC.LSFT}, {}],
-        )
-
-        keyboard.test(
-            'OS stacking with layer change',
-            [
-                (1, True),
-                (4, True),
-                (4, False),
-                (1, False),
-                (4, True),
-                (4, False),
-                (2, True),
-                (2, False),
-            ],
-            [
-                {KC.LSFT},
-                {KC.LSFT, KC.E},
-                {KC.LSFT, KC.E, KC.C},
-                {KC.LSFT, KC.E},
-                {KC.LSFT},
-                {},
-            ],
-        )
--- a/tests/test_tapdance.py
+++ b/tests/test_tapdance.py
@@ -88,7 +88,7 @@ class TestTapDance(unittest.TestCase):
            [{KC.N1}, {KC.N1, KC.N4}, {KC.N4}, {}],
        )

-    def test_holdtap(self):
+    def test_modtap(self):
        keyboard = self.keyboard
        t_within = self.t_within
        t_after = self.t_after
@@ -199,12 +199,12 @@ class TestTapDance(unittest.TestCase):
            [{KC.A}, {}, {KC.N5}, {}],
        )

-    def test_holdtap_repeat(self):
+    def test_modtap_repeat(self):
        keyboard = self.keyboard
        t_after = self.t_after

        keyboard.test(
-            'HoldTap repeat',
+            'ModTap repeat',
            [
                (2, True),
                (2, False),
--- a/user_keymaps/kdb424/luddite.py
+++ b/user_keymaps/kdb424/luddite.py
@@ -2,8 +2,8 @@ from kb import KMKKeyboard

 from kmk.extensions.rgb import RGB
 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap

 keyboard = KMKKeyboard()

@@ -22,15 +22,15 @@ FN1 = 2

 rgb_ext = RGB(pixel_pin=keyboard.rgb_pixel_pin, num_pixels=16)
 layers_ext = Layers()
-holdtap = HoldTap()
+modtap = ModTap()

-keyboard.modules = [layers_ext, holdtap]
+keyboard.modules = [layers_ext, modtap]
 keyboard.extensions = [rgb_ext]

 _______ = KC.TRNS
 XXXXXXX = KC.NO
-HOME = KC.HT(KC.HOME, KC.LSFT)
-END = KC.HT(KC.END, KC.RSFT)
+HOME = KC.MT(KC.HOME, KC.LSFT)
+END = KC.MT(KC.END, KC.RSFT)
 LEFT_LAY = KC.LT(FN1, KC.LEFT)
 SHFT_INS = KC.LSFT(KC.INS)
 SPC = KC.LT(FN1, KC.SPC)
--- a/user_keymaps/kdb424/nyquist_r2.py
+++ b/user_keymaps/kdb424/nyquist_r2.py
@@ -5,8 +5,8 @@ from kb import KMKKeyboard
 from kmk.extensions.rgb import RGB
 from kmk.handlers.sequences import send_string, simple_key_sequence
 from kmk.keys import KC
-from kmk.modules.holdtap import HoldTap
 from kmk.modules.layers import Layers
+from kmk.modules.modtap import ModTap
 from kmk.modules.split import Split

 keyboard = KMKKeyboard()
@@ -15,11 +15,11 @@ keyboard = KMKKeyboard()
 keyboard.tap_time = 150

 layers = Layers()
-holdtap = HoldTap()
+modtap = ModTap()
 rgb_ext = RGB(pixel_pin=keyboard.rgb_pixel_pin, num_pixels=27, val_limit=100, hue_default=190, sat_default=100, val_default=5)
 split = Split()

-keyboard.modules = [holdtap, layers, split]
+keyboard.modules = [modtap, layers, split]
 keyboard.extensions = [rgb_ext]

 _______ = KC.TRNS
--- a/user_keymaps/rk463345/levinson_r2.py
+++ b/user_keymaps/rk463345/levinson_r2.py
@@ -35,7 +35,7 @@ keyboard.keymap = [
        # Default
        KC.GESC,  KC.Q,    KC.W,    KC.E,    KC.R,    KC.T,    KC.Y,    KC.U,    KC.I,    KC.O,    KC.P,    KC.BSPC,
        KC.TAB,   KC.A,    KC.S,    KC.D,    KC.F,    KC.G,    KC.H,    KC.J,    KC.K,    KC.L,    KC.SCLN, KC.QUOT,
-        KC.LSFT,  KC.Z,    KC.X,    KC.C,    KC.V,    KC.B,    KC.N,    KC.M,    KC.COMM, KC.DOT,  KC.SLSH, KC.HT(KC.BSLS, KC.LSFT),
+        KC.LSFT,  KC.Z,    KC.X,    KC.C,    KC.V,    KC.B,    KC.N,    KC.M,    KC.COMM, KC.DOT,  KC.SLSH, KC.MT(KC.BSLS, KC.LSFT),
        KC.LCTRL, KC.LGUI, KC.LALT, LOWER,   KC.ENT,  KC.SPC,  KC.SPC,  UP_HYP,  KC.LEFT, KC.DOWN, KC.UP,   KC.RGHT,
    ],
    [
Author	SHA1	Message	Date
Cole Smith	c538d98dfa	formatting sorry	2023-01-23 16:44:21 -08:00
Cole Smith	2fc1d586d6	updated docs	2023-01-23 16:37:02 -08:00
Cole Smith	5d65940f28	added reviung34, made gtips folder and moved all reviung boards into said folder	2023-01-23 16:24:39 -08:00